User's Manual

Moire Appears in Scan Results
Check 1
Increase the scanning resolution.
Resolution
Check 2
Take the following measures and scan again.
•
Set one of the following settings in the Settings (Document Scan) dialog box, Settings (Custom Scan)
dialog box, Settings (Scan and Stitch) dialog box, Settings (OCR) dialog box or Settings (E-mail) dialog
box of IJ Scan Utility, then scan from the IJ Scan Utility main screen.
◦
Set Select Source to Magazine and set Color Mode to Color
◦
Select the Reduce moire checkbox in Image Processing Settings
Settings (Document Scan) Dialog Box
Settings (Custom Scan) Dialog Box
Settings (Scan and Stitch) Dialog Box
Settings (OCR) Dialog Box
Settings (E-mail) Dialog Box
•
On the Basic Mode tab of ScanGear (scanner driver), select Magazine (Color) in Select Source.
Refer to "Basic Mode Tab" for your model from Home of the Online Manual for details.
•
On the Advanced Mode tab of ScanGear, set Descreen in Image Settings to ON.
Refer to "Image Settings" for your model from Home of the Online Manual for details.
Note
•
If moire appears when you scan a digital print photo, take the above measures and scan again.
994