User Guide

Note
• If you don't know the password, contact the network (server) administrator.
PIN Code
PIN code is a security code for accessing the folder selected in Shared Folder Name in Destination
on the printer's operation panel. Set it to prevent unauthorized access or changes to the settings by a
third party.
Important
• Enter at least four characters using letters, numbers and/or symbols.
• The default value (0000) is set. When not specifying the PIN code, delete "0000."
• When setting the PIN code, be sure to write it down for future reference since you will need to enter
it in cases such as setting the folder as the destination folder for received fax data or for data
scanned from the operation panel of the printer.
• If you have forgotten the PIN code, delete the folder from Destination Folder Setting List, then
add it again.
• When editing the destination folder, enter the PIN code that you set at the time of adding the folder.
Connection Test
Click to check for a connection to the folder in which to save data.
Important
• Make sure of the following before performing Connection Test.
• The printer is turned on
• The printer and computer are connected to the network
• Another software or user is not using the printer
• An error is not displayed on the operation panel of the printer
OK
Click to apply the addition and edits.
Important
• If Connection Test has not been clicked, the utility automatically checks if it can connect to the
destination folder for data.
Make sure of the following before clicking OK.
• The printer is turned on
• The printer and computer are connected to the network
• Another software or user is not using the printer
• An error is not displayed on the operation panel of the printer
Instructions
Opens this guide.
39