User Manual
Loading Based on Use
Load originals correctly for how they will be used. Originals loaded incorrectly may cause scanning
problems.
Align Originals with the alignment mark
•
When loading originals to copy or fax
•
When selecting Doc.type > Document or Photo in Scan and specifying a standard size (such as A4/
Letter) in Scan size
•
When using a computer to:
◦
Scan documents, magazines, or newspapers
◦
Specify a standard size (such as A4/Letter) to scan originals
Place the original face-DOWN on the platen glass and align it with the alignment mark (
). The
diagonally striped area is outside the scanning area.
Important
•
The striped area (A, 0.04 inch (1 mm) from the edges of the platen glass) is outside the scanning
area.
Center One Original on the platen glass
•
When selecting Doc.type > Photo in Scan and specifying Scan size > Auto scan to scan one
original
Load the original face-DOWN at least 0.4 inch (1 cm) from the edges of the platen glass. The diagonally
striped area is outside the scanning area.
191