User Manual

Saving Scanned Data on USB Flash Drive
You can save scanned data on the USB flash drive directly.
Important
Do not remove the USB flash drive from the printer under the following conditions:
While scanning is in progress
Before saving the scanned data
For safety reasons, we recommend backing up the scanned data saved on a USB flash drive to another
media periodically to avoid unexpected accidents.
We assume no responsibility for damage to or loss of data for whatever reason even within the warranty
period.
1.
Make sure printer is turned on.
2.
Flick HOME screen and tap Scan.
Using the Operation Panel
The screen for selecting to which you save the data is displayed.
3.
Insert USB flash drive into USB flash drive port.
4.
Tap USB flash drive.
Note
When the message informing you that the operation restriction is enabled, ask the administrator of
the printer you are using.
5.
Tap Save to USB flash drive.
The Scan standby screen is displayed.
6.
Adjust settings as necessary.
913