Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
Press .
Scanning starts.
To cancel, press
<Yes> .
You cannot scan while the MF Toolbox setup screen is displayed. Close the screen
before scanning.
If there are additional pages of documents to be scanned, place the next document on the platen glass, and
press .
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
Select <Finish Scanning>, and press .
The save destination folder is displayed on the computer.
About the save destination folder
By default, the scanned data is saved to the [Pictures] or [My Pictures] folder. A subfolder named with the scanning date is
created, and the data is saved to that folder.
To change the save destination, see
Configuring Storing Settings.
Scan from the machine more easily
If you have regularly used preferences, such as scanning in color or black and white, or a pre-determined computer where
scanned documents will be saved, specifying these settings each time you scan can be troublesome. Register these settings in a
[Scan -> PC] key so that you can scan with one press of a key.
Scanning Using the [Scan -> PC] Key
6
7
8
㻝㻝㻢㻌㻛㻌㻟㻟㻢