Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
0L40-05L
Setting Up Print Server
With a print server, you can reduce the load on the computer that you print from. The print server also enables each computer to install
MF Drivers over the network, which saves you the trouble of installing the drivers on each computer by using the DVD-ROM. To set up a
computer on the network as a print server, configure the settings for sharing the printer.
To perform the following procedure, log on to your computer with an administrator account.
You may be unable to install drivers over the network depending on the operating system and the bit architecture (32-bit or
64-bit) of the print server and client computers.
When implementing a print server in a domain environment, consult your Network Administrator.
To obtain device information when using a print server
Canon Driver Information Assist Service must be added during the printer driver installation. MF Driver Installation Guide
Open the printer folder. Displaying the Printer Folder
Right-click your printer icon and click [Printer properties] (or [Properties]).
Click the [Sharing] tab, select [Share this printer], and enter the share name of the machine.
When [Change Sharing Options] is displayed
Click [Change Sharing Options]. If the [User Account Control] dialog box appears, click [Yes] (or [Continue]).
1
2
3
㻝㻣㻥㻌㻛㻌㻟㻟㻢