Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
0L40-05W
Setting a Wait Time for Connecting to a Network
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to
prevent packets from looping. One effective solution is to define the role of each switch port. However, communication may still be
disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new
device. If this type of problem occurs, set a wait time for connecting to the network.
Press .
Use / to select <Network Settings>, and press .
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press . Setting the System
Manager PIN
Select <Waiting Time for Connection at Startup>, and press .
Enter the wait time in seconds, and press .
Use / or the numeric keys to enter the time.
Press .
LINKS
Configuring Ethernet Settings
Changing the Maximum Transmission Unit
1
2
3
4
5
㻝㻤㻢㻌㻛㻌㻟㻟㻢