Operation Manual

Specify SNMPv1 settings.
[Use SNMPv1]
Select the check box to enable SNMPv1. You can specify the rest of SNMPv1 settings only when this check box is selected.
[Use Community Name 1]/[Use Community Name 2]
Select the check box to specify a community name. If you do not need to specify a community name, clear the check box.
[Community Name]
Enter up to 32 alphanumeric characters for the name of the community.
[MIB Access Permission]
For each community, select [Read/Write] or [Read Only] for the access privileges to MIB objects.
[Read/Write] Permits both viewing and changing the values of MIB objects.
[Read Only] Permits only viewing the values of MIB objects.
[Use Dedicated Community]
Dedicated Community is a preset community, intended exclusively for Administrators using Canon software. Select the check box
to use Dedicated Community. If you do not need to use Dedicated Community, clear the check box.
Enabling SNMPv1
Disabling SNMPv1
Clear the [Use SNMPv1] check box.
1
Select the [Use SNMPv1] check box.
2
Select the [Use Community Name 1] or [Use Community Name 2] check box, enter the community name
in the [Community Name] text box, and specify the [MIB Access Permission] setting.
Up to two community names can be registered.
3
Select the [Use Dedicated Community] check box and specify the [MIB Access Permission] setting.
5
㻝㻥㻞㻌㻛㻌㻟㻟㻢