Operation Manual

0L40-062
Setting the System Manager PIN
Set a System Manager PIN that is intended exclusively for Administrators. You can access <Network Settings>, <System Management
Settings>, etc. only when the PIN has been entered correctly. It is recommended that only Administrators know the PIN.
Press .
Use / to select <System Management Settings>, and press .
Select <System Manager Information Settings> <System Manager PIN>.
Specify the System Manager PIN.
Enter a number of up to seven digits using the numeric keys, and press .
When <PIN (Confirm)> is displayed, enter the PIN once again to confirm.
You cannot set a PIN that consists only of zeros, such as "00" or "0000000".
To disable the PIN, press
to erase the PIN (leave the text box blank), and press .
Setting the System Manager Name
Configuring settings via the Remote UI (MF212w)
Start the Remote UI and log on in System Manager Mode. Click [Settings/Registration] [System Management] [Edit...] and
specify the necessary settings on the displayed screen.
By using the Remote UI, you can register a variety of information, including contact information, Administrator comments, the
installation location of the machine, as well as to the settings that you can register by using the operation panel. The
registered information can be viewed on the [Device Information] page of the Remote UI.
Checking System Manager
Information
If a System Manager PIN is Set
If you try to access <Network Settings>, <System Management Settings>, etc., the following
screen is displayed. Enter the set PIN.
Entering a PIN is also required when logging on in System Manager Mode in the Remote UI.
Starting Remote UI
1
Select <System Manager Name>, and press .
2
Enter up to 32 characters for the System Manager Name, select <Apply>, and press . Entering
Text
1
2
3
4
㻝㻥㻢㻌㻛㻌㻟㻟㻢