Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
Use HTTP
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote UI or WSD printing.
Disabling HTTP Communication
Off
On
Port Number Settings
Change port numbers for protocols according to the network environment. Changing Port Numbers(MF212w)
LPD
1 to 515
to 65535
RAW
1 to 9100
to 65535
WSD Multicast Discovery
1 to 3702
to 65535
HTTP
1 to 80
to 65535
SNMP
1 to 161
to 65535
MTU Size
Select the maximum size of packets the machine sends or receives. Changing the Maximum Transmission Unit
1300
1400
1500
Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. Monitoring and
Controlling the Machine with SNMP
SNMPv1 Settings
Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information
Base(MIB) objects.
Off
On
Community Name 1 Settings
Off
On
Community Name 2 Settings
Off
On
Dedicated Community Settings
Off
On
SNMP Settings
<Network Settings> <SNMP Settings> <SNMPv1 Settings> <SNMPv1
Settings>
Select <Off> or <On> Specify settings if <On> is selected
㻞㻞㻠㻌㻛㻌㻟㻟㻢