Operation Manual

Press to increase a setting value such as density for scanning, copying, etc.
[ ] key
When specifying settings, press to select the item below the currently selected item.
When changing setting values, press to decrease a value.
[Clear] key
Press to delete the entered numbers and text.
[Back] key
Press to return to the previous screen. If you press this key when specifying settings, for example, the settings are not applied
and the display returns to the previous screen.
[OK] key
Press to apply settings or specified details.
[Status Monitor] key
Press to check the status of printing or copy to view the usage history. You can also check the status of the machine, such as the
remaining amounts of paper and toner, or whether any errors occurred.
Display
[Paper Setting] key
Press to select the paper you want to use, or to set the size and type of paper loaded in the paper source.
Specifying Paper
Size and Type
Numeric keys ([0]-[9] keys)
Press to enter numbers and text.
Entering Text
[Stop] key
Press to cancel copying, scanning, and other operations.
[Energy Saver] key
Press to put the machine into sleep mode. The key lights up green when the machine is in sleep mode. Press the key again to exit
sleep mode.
Entering Sleep Mode
[Scan -> PC1]/ [Scan -> PC2] keys
Press to send the scanned documents to the registered computer for each key.
Scanning Using the [Scan -> PC] Key
[Quiet Mode] key
Press to put the machine into quiet mode. While in quiet mode this key is lit in green. Press the key again to exit quiet mode.
Entering Quiet Mode
[Error] indicator
Blinks or lights up when an error such as a paper jam occurs
Wi-Fi indicator
Lights up when the machine is connected to wireless LAN.
[Processing/Data] indicator
Blinks while operations such as sending or printing are being performed. Lights up when there are documents waiting to be
processed.
[Start] key
Press to scan or copy documents.
[#] key
Press to enter symbols such as "@" or "/".
[*] key
Press to switch the type of text that is entered.
㻞㻠㻌㻛㻌㻟㻟㻢