Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
After the setting is enabled
When set to <On>, this setting takes priority over the setting for <Special Mode Z>.
While more effect is gained than with <Special Mode Z>, print speed is slower.
After printing from a smartphone or tablet
If streaks adhere to the paper, change the setting with <Special Mode D>
<Copy>.
Special Mode I
Only select <On> if paper jams frequently when printing on lightweight paper or on curled paper.
Off
On
When set to <On>
White patches may appear in images printed on paper other than lightweight paper.
Special Mode J
If printing is uneven when printing fine lines or faint images, select <On>.
Off
On
When set to <On>.
The following may occur.
Definition may be affected
Toner appears in non-print areas when using a new toner cartridge
Toner may be used up more quickly
<Adjustment/Maintenance> <Special Processing> <Special Mode D> Select
<Copy> or <Print>
<On>
<Adjustment/Maintenance> <Special Processing> <Special Mode I> <On>
<Adjustment/Maintenance> <Special Processing> <Special Mode J> <On>
㻞㻠㻞㻌㻛㻌㻟㻟㻢