Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
Is <Correct Density> in <Copy Settings> set too dark?
Adjust the setting so that density is lighter.
Setting Menu List
Is the printer installed where it is subject to direct sunlight or strong light?
Install the printer in an appropriate location.
Installation
Relocating the Machine
Was the toner cartridge been left in direct sunlight for a long period of time?
Store the toner cartridge in an appropriate location for two to three hours, then try printing again. This may solve the
problem. If the problem persists, replace the toner cartridge.
Replacing Toner Cartridges
Cannot Scan a Printed Barcode
Are you trying to scan a barcode printed with factory default settings?
In the printer driver, specify [Special Settings 1] for the setting of [Special Print Mode].
Replacing Toner Cartridges
When set to [Special Settings 1], print density is lighter compared with [Off]. Text and lines may also appear
faded.
White specks may appear in images printed on paper other than lightweight paper with this feature set to [ON].
㻞㻢㻥㻌㻛㻌㻟㻟㻢