Operation Manual
Table Of Contents
- MF212w/MF211
- Important Safety Instructions
- Basic Operations
- Copying
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Network (MF212w)
- Security
- Using Remote UI (MF212w)
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- MF Driver Installation Guide
0L40-010
Specifying Paper Size and Type
You must specify the paper size and type settings to match the paper that is loaded. Make sure to change the paper settings when you
load the paper that is different from the previously loaded paper.
If the setting does not match the size and type of loaded paper, a paper jam or printing error may occur.
Press (Paper Setting).
Use / to select <MP Tray> or <Drawer 1>, and press .
Select the loaded paper size, and press .
If the loaded paper size is not displayed, use / to select <Other Sizes>, and press .
Select the loaded paper type, and press .
When a frequently used paper size is known
You can set the machine to display only frequently used paper sizes in the selection screen.
1
Press (Paper Setting).
2
Select <Select Frequently Used Paper Sizes>, and press .
3
Select <Multi-Purpose Tray> or <Drawer 1>, and press .
1
2
3
4
㻠㻡㻌㻛㻌㻟㻟㻢