User Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Placing Originals
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Registering Destinations
- Using a USB Memory Device
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Increasing the Security of Documents
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting (FAQ)
- Appendix
- SIL OPEN FONT LICENSE
Procedure for Setting a FTP Server as a Save Location
524J-01X
Befor
e conguring the machine for scanning to FTP Server, check the setup ow shown below.
Make sure that the machine and the computer are correctly connected.
Connecting to a Wireless LAN(P. 18)
Connecting to a Wired LAN(P. 17)
Make sure that you have the following information:
● The IP addr
ess of the machine.
Viewing Network Settings(P. 38)
● FTP server name.
● Path to the FTP server and folder name.
● User name, passwor
d (only if set).
● If the path, folder name, user name, passwor
d, etc. for the FTP server are
unknown, contact you Network Administrator.
● To change the FTP port number.
Changing Port Numbers(P. 381)
Check whether you need to use PASV mode.
● If a r
ewall is installed between the machine and the FTP server, you must set
PASV mode.
Conguring FTP P
ASV Mode(P. 73)
● Also mak
e sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication(P. 418)
Disabling Remote UI(P. 419)
Register the FTP server address.
Registering Destinations from Remote UI(P. 435)
Setting Up
97