MF525x / MF522x Gebruikershandleiding USRMA-2882-01 2018-12 nl Copyright CANON INC.
Inhoudsopgave Instellen ................................................................................................................................................................ Hoofdfuncties 3 ........................................................................................................................................................... 4 Verplichte voorbereidingen vóór gebruik .............................................................................................................
Communicatie-instellingen voor E-mail/I-Fax configureren ................................................................................ 91 Procedure om een gedeelde map in te stellen als een opslaglocatie Een gedeelde map instellen als een opslaglocatie .......................................................................... 95 ............................................................................................. 96 Procedure om een FTP Server in te stellen als een opslaglocatie ...........
Bestemmingen opslaan in het adresboek ............................................................................................................ 181 Meerdere bestemmingen als een groep opslaan ............................................................................................ 184 De geregistreerde bestemmingen in het adresboek bewerken Een USB-geheugenapparaat gebruiken ......................................................................... 186 ............................................
Een met pincode beveiligd document afdrukken (Beveiligde afdruk) Documenten beveiligd afdrukken ....................................................................... 266 ................................................................................................................. 267 Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia) ........................................................ 270 Scannen .............................................................................
De netwerkinstellingen configureren .................................................................................................................... 371 Communicatie beperken door firewalls in te stellen IP-adressen opgeven voor firewallinstellingen .............................................................................................. 373 ...............................................................................................
.................................................................................................................................................... 497 ...................................................................................................................................................... 503 .........................................................................................................................................................
Maatregelen bij iedere foutcode Papierstoringen verhelpen ......................................................................................................................... 647 .................................................................................................................................... 658 Papierstoringen in de documentinvoer Papierstoringen in de hoofdeenheid Papierstoringen in de papierlade ..................................................................................
Instellen Instellen Instellen ................................................................................................................................................................... 3 Hoofdfuncties ........................................................................................................................................................ 4 Verplichte voorbereidingen vóór gebruik ..........................................................................................................
Instellen Het faxnummer en de naam van het apparaat registreren ............................................................................ 81 De ontvangstmodus selecteren ...................................................................................................................... 82 De telefoonlijn aansluiten ............................................................................................................................... 83 Scaninstellingen configureren .............................
Instellen Instellen 2U6C-000 Voordat u de functies van het apparaat gebruikt, moeten eerst de omgevingsvoorwaarden zijn ingesteld. Om te beginnen, controleert u de vereiste reeks om de instelling te voltooien, en realiseert u vervolgens de actuele instellingen. Verplichte voorbereidingen vóór gebruik(P. 6) ● De geïnstalleerde functies op het apparaat verschillen, afhankelijk van het model dat u hebt gekocht. Voordat u het apparaat gebruikt, raadpleegt u Hoofdfuncties(P.
Instellen Hoofdfuncties 2U6C-001 Deze handleiding behandelt al de functies van de modelserie die u hebt gekocht. Voordat u begint, moet u eerst controleren welke functie aanwezig zijn op het model dat u hebt gekocht.
Instellen Gebruikershandleiding inzien(P.
Instellen Verplichte voorbereidingen vóór gebruik 2U6C-002 Volg stappen 1 tot en met 5 om het apparaat in te stellen. Als u meer wilt weten over een bepaalde stap, klikt u op de koppeling om naar het desbetreffende gedeelte te gaan. Om de machine veilig te gebruiken, moet u bovendien Onbevoegde toegang voorkomen(P. 8) activeren. Stap 1 Instellen met behulp van de installatiehandleiding(P. 10) Stap 2 De netwerkomgeving instellen(P.
Instellen Instellen vanuit de externe UI ● Als de instellingen voor de netwerkomgeving zijn gerealiseerd, kunt u het apparaat ook efficiënt instellen vanaf een computer met behulp van de externe UI. De UI op afstand starten(P.
Instellen Onbevoegde toegang voorkomen 2U6C-003 Dit gedeelte beschrijft de veiligheidsmaatregelen voor het voorkomen van onbevoegde toegang vanuit een extern netwerk. Dit moet absoluut worden gelezen voor alle gebruikers en beheerders voordat zij het apparaat, andere printers en multifunctionele apparaten die op het netwerk zijn aangesloten, gaan gebruiken.
Instellen ● Als een routeerbaar IP-adres is toegewezen aan een printer/multifunctioneel apparaat, kunt u een netwerkomgeving creëren waarin het risico van onbevoegde toegang wordt beperkt, door veiligheidssoftware te installeren, zoals een firewall, die toegang vanuit externe netwerken voorkomt. Als u een routeerbaar IP adres wil toewijzen aan een printer/multifunctioneel apparaat dat u wilt gebruiken, neem dan contact op met uw netwerkbeheerder.
Instellen Instellen met behulp van de installatiehandleiding 2U6C-004 1660-009 Als het apparaat voor de eerste keer wordt ingeschakeld ( Het apparaat AAN zetten(P. 116) ), start de instelhandleiding om u te helpen de begininstellingen van het apparaat te realiseren, door de scherm-leidraad te volgen. In de instelhandleiding worden de instelschermen in deze volgorde weergegeven.
Instellen ● Als u selecteert, wordt draadloos LAN niet ingesteld, en de instelhandleiding gaat verder naar stap 5. 2 Selecteer . 3 Selecteer de instelmethode. ● Raadpleeg Verbinding maken met een draadloos LAN(P. 18) voor meer informatie over het draadloos LAN. Stap 5 Application Library (Toepassingenbibliotheek) bekijken De sneltoets met referentie 'Application Library (Toepassingenbibliotheek)' wordt weergegeven in het scherm Start U kunt de beschrijving van iedere functie lezen.
Instellen De datum en tijd instellen 2U6C-005 Stel de datum en tijd in voor het apparaat. De datum en tijd worden gebruikt als de referentie voor de functies die de tijd specificeren, en daarom moeten ze nauwkeurig worden ingesteld. De tijdzone instellen(P. 12) De huidige datum en tijd instellen(P. 12) De zomertijd instellen(P. 13) De tijdzone instellen Als de instelling van de tijdzone wordt veranderd, worden de waarden bij automatisch aangepast.
Instellen 3 Voer de datum en tijd in. ● Tik op het invoerveld, en stel de huidige datum en tijd in. 4 Selecteer . ● Selecteer een waarde voor voordat u de huidige datum en tijd gaat instellen. Als u de waarde voor later wijzigt, worden de huidige datum en tijd automatisch aangepast. ● Het weergaveformaat van de datum respectievelijk tijd kan worden veranderd. (P. 463) (P.
Instellen De netwerkomgeving instellen 2U6C-006 Wanneer u de verbinding tot stand brengt van het apparaat met een bekabeld of draadloos lokaal netwerk (LAN), moet u een IP-adres instellen dat uniek is voor het geselecteerde netwerk. Kies voor "bekabeld" of "draadloos", afhankelijk van de communicatie-omgeving en netwerkapparatuur. Neem voor specifieke vragen over de instellingen van het IP-adres contact op met uw internetprovider of de netwerkbeheerder.
Instellen ● Om verbinding te maken met een IEEE 802.1X-netwerk, raadpleegt u verificatie-instellingen configureren(P. 403) . IEEE 802.1X- Kies voor een bekabeld of draadloos LAN. Bedraad LAN of Draadloos LAN selecteren(P. 16) Maak verbinding met een bekabeld of draadloos LAN. ● Ga verder met het gedeelte dat overeenkomt met de instelling die u in stap 2 hebt geselecteerd. Verbinding maken met een bekabeld LAN(P. 17) Verbinding maken met een draadloos LAN(P. 18) Stel zo nodig het IP-adres in.
Instellen Bedraad LAN of Draadloos LAN selecteren 2U6C-007 Wanneer u een besluit hebt genomen over de verbinding tussen het apparaat en de computer via een bedraad of een draadloos netwerk, selecteert u bedraad of draadloos LAN met het bedieningspaneel. Let op: als u de instelling wijzigt van in of vice versa, zult u de installatie van MF-stuurprogramma's die op uw computer zijn geïnstalleerd, ongedaan moeten maken en ze vervolgens opnieuw moeten installeren.
Instellen Verbinding maken met een bekabeld LAN 2U6C-008 Sluit de machine via een router aan op een computer. Sluit de machine met een LAN-kabel aan op de router. 1 Sluit een LAN-kabel aan. ● Sluit de machine met een LAN-kabel aan op een router. ● U hoort een klik als de connector van de kabel op zijn plaats klikt. 2 Wacht enkele minuten. ➠ Het IP-adres wordt automatisch ingesteld. ● U kunt het IP-adres handmatig instellen. IP-adressen instellen(P. 31) KOPPELINGEN De netwerkomgeving instellen(P.
Instellen Verbinding maken met een draadloos LAN 2U6C-009 Als u een draadloze router (of een toegangspunt) gebruikt, loopt de verbinding tussen de machine en een computer via radiogolven. Als uw draadloze router ondersteuning biedt voor Wi-Fi Protected Setup (WPS), kunt u het netwerk automatisch en dus eenvoudig configureren.
Instellen ◼ PIN-modus Sommige WPS-routers bieden geen ondersteuning voor de zogenaamde drukknop-modus. Als op de verpakking of in de documentatie van het netwerkapparaat over WPS en pincodes wordt gesproken, moet u de verbinding instellen door een pincode in te voeren. De verbinding instellen met behulp van de WPS-pincodemodus(P. 22) ● Als de draadloze router is ingesteld voor WEP-verificatie, kunt u mogelijk geen verbinding instellen via WPS.
Instellen De verbinding instellen met behulp van de WPS Drukknop-modus 2U6C-00A 1660-00J Als uw draadloze router ondersteuning biedt voor de drukknop-modus van WPS, kunt u eenvoudig een verbinding configureren via de WPS-knop. ● De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. 1 Selecteer
Instellen ● Selecteer en ga terug naar stap 5. 8 Wacht totdat het bericht wordt weergegeven. 9 Selecteer . ➠ Wacht enkele minuten totdat het IP-adres en andere items automatisch zijn ingesteld. Signaalsterkte ● Als voor een verbinding meerdere draadloze routers beschikbaar zijn, maakt de machine verbinding met het apparaat met het krachtigste signaal. De signaalsterkte wordt gemeten met behulp van RSSI (Received Signal Strength Indication).
Instellen De verbinding instellen met behulp van de WPSpincodemodus 2U6C-00C Als uw draadloze router ondersteuning biedt voor de WPS PIN-modus, genereert u een pincode met de machine en registreert u deze code op het netwerkapparaat. ● De instructies voor de draadloze router kunnen per apparaat verschillen. Raadpleeg de handleiding van de router voor hulp. Vanaf een computer 1 Ga in een browser naar de instellingen van de draadloze router en geef het scherm weer voor het invoeren van een WPS PIN-code.
Instellen 8 Registreer de gegenereerde pincode op de draadloze router. ● Registreer de pincode in het installatiescherm zoals weergegeven in stap 1. ● U moet de pincode binnen 10 minuten na het selecteren van in stap 7 registreren. Als er een foutbericht verschijnt tijdens het installeren ● Selecteer en ga terug naar stap 6. Vanaf het bedieningspaneel 9 10 Wacht totdat het bericht wordt weergegeven. Selecteer .
Instellen De verbinding instellen door een draadloze router te selecteren 2U6C-00E U kunt de beschikbare draadloze routers (of toegangspunten) zoeken en een keuze maken uit de display van het apparaat. Geef voor de netwerksleutel een WEP-sleutel op of PSK. Controleer en noteer de benodigde configuratiegegevens, zoals de SSID en netwerksleutel ( De SSID en de netwerksleutel controleren(P. 30) ) voordat u een draadloze router selecteert.
Instellen ● Selecteer de router waarvan de SSID overeenkomt met de SSID die u hebt opgeschreven, en selecteer . De details van beveiligingsinstellingen weergeven ● Selecteer de Draadloos LAN router, en selecteer . Om terug te keren naar het vorige scherm, selecteert u . Als uw draadloze router niet wordt gevonden ● Controleer of het apparaat goed is geïnstalleerd en klaar is voor verbinding met het netwerk. Installatie-/instellingenproblemen(P.
Instellen Het stroomverbruik verminderen ● U kunt instellen dat de van het apparaat moet worden geactiveerd als er bepaalde signalen van de draadloze router worden ontvangen. (P. 468) Als het IP-adres van het apparaat is gewijzigd ● In een DHCP-omgeving kan het IP-adres van het apparaat automatisch worden gewijzigd. Als dit gebeurt, wordt de verbinding gehandhaafd op voorwaarde dat het apparaat en de computer nog steeds deel uitmaken van hetzelfde subnet.
Instellen De verbinding instellen door gedetailleerde instellingen op te geven 2U6C-00F Als u gedetailleerde beveiligingsinstellingen wilt opgeven of geen draadloze verbinding tot stand kunt brengen via de andere procedures, kunt u alle benodigde gegevens voor de draadloze verbinding ook zelf invoeren. Controleer en noteer de benodigde gegevens voordat u de instellingen gaat opgeven.
Instellen Hiermee stelt u de verificatiemethode in op Open systeem, ook wel "open verificatie" genoemd. Gebruik de WEP-sleutel als wachtwoord. Wanneer is geselecteerd ● Wanneer u verbinding maakt met een draadloos LAN, treedt er op het apparaat een verificatiefout op als op de draadloze router verificatie met een gedeelde sleutel is ingeschakeld.
Instellen 8 Selecteer . Als er een foutbericht verschijnt tijdens het installeren ● Selecteer , controleer of de opgegeven instellingen juist zijn en ga terug naar stap 5. 9 10 Wacht totdat het bericht wordt weergegeven. Selecteer . ➠ Wacht enkele minuten totdat het IP-adres en andere items automatisch zijn ingesteld.
Instellen De SSID en de netwerksleutel controleren 2U6C-00H Wanneer u handmatig een draadloze verbinding gaat instellen, moet u de SSID en netwerksleutel van de draadloze router opgeven. De SSID en de netwerksleutel worden mogelijk aangegeven op de router. Controleer het apparaat en noteer de benodigde gegevens voordat u de verbinding gaat instellen. Meer informatie over uw netwerkapparatuur kunt u lezen in de handleidingen of opvragen bij de fabrikant.
Instellen IP-adressen instellen 2U6C-00J Als u de machine wilt gebruiken in een netwerk, hebt u een uniek IP-adres nodig. Er zijn twee versies van IP-adressen beschikbaar: IPv4 en IPv6. Configureer het IP-adres afhankelijk van de netwerkomgeving. Als u IPv6-adressen wilt gebruiken, moet u de IPv4-adresinstellingen op de juiste manier configureren. IPv4-adres instellen(P. 32) IPv6-adressen instellen(P.
Instellen IPv4-adres instellen 2U6C-00K 1660-00W Het IPv4-adres van het apparaat kan automatisch worden toegewezen via een speciaal protocol zoals DHCP of het kan handmatig worden ingevoerd. Als u het apparaat verbindt met een bekabeld LAN, zorg er dan voor dat de stekker van de LAN-kabel stevig in de aansluiting zit ( Verbinding maken met een bekabeld LAN(P. 17) ). U kunt de netwerkverbinding indien nodig testen. IPv4-adres instellen(P. 32) De netwerkverbinding testen(P.
Instellen 3 Selecteer . Als u niet met DHCP/BOOTP/RARP een IP-adres wilt toewijzen ● Selecteer . Als u selecteert wanneer deze diensten niet beschikbaar zijn, zal het apparaat tijd en communicatiemiddelen verspillen met het op het netwerk zoeken naar deze diensten. 4 Controleer of is ingesteld op . ● Als is geselecteerd, verandert u dit in . 5 Selecteer .
Instellen ● Als het aanmeldingsscherm verschijnt, voert u de juiste combinatie van ID en pincode in. het apparaat(P. 133) Aanmelden bij 3 Selecteer 4 Voer het IPv4-adres in van een ander apparaat in het netwerk en selecteer . . ➠ Als een werkende verbinding tot stand is gebracht, verschijnt het scherm . KOPPELINGEN IPv6-adressen instellen(P. 35) Netwerkinstellingen weergeven(P.
Instellen IPv6-adressen instellen 2U6C-00L De IPv6-adressen van het apparaat kunnen worden geconfigureerd via de UI op afstand. Controleer voordat u IPv6-adressen gaat instellen de instellingen van het IPv4-adres ( IPv4-instellingen weergeven(P. 38) ). U moet de juiste IPv4instellingen opgeven om te kunnen werken met IPv6-adressen. De scanfunctie die gebruikmaakt van het scannerstuurprogramma of MF Scan Utility is niet beschikbaar in een IPv6-omgeving.
Instellen [Gebruik IPv6] Schakel dit selectievakje in om IPv6 te activeren op het apparaat. Als u IPv6 niet gebruikt, schakelt u het selectievakje uit. [Stateless adres 1] Schakel dit selectievakje in als u een stateless adres gebruikt. Als u geen stateless adres gebruikt, schakelt u het selectievakje uit.
Instellen Controleren of de instellingen juist zijn ● Controleer of het scherm Externe UI kan worden weergegeven op uw computer door het IPv6-adres van het apparaat te gebruiken. De UI op afstand starten(P. 424) Instellingen selecteren vanaf het bedieningspaneel ● De IPv6-instellingen zijn ook bereikbaar via
Instellen Netwerkinstellingen weergeven 2U6C-00R IPv4-instellingen weergeven(P. 38) IPv6-instellingen weergeven(P. 38) Het MAC-adres weergeven voor Bedraad LAN(P. 38) Het MAC-adres en informatie weergeven voor Draadloos LAN(P. 39) ● Het IP-adres is niet goed geconfigureerd als dit wordt weergegeven als "0.0.0.0". ● Als u het apparaat aansluit op een switching hub of bridge, kan er sprake zijn van een verbindingsfout, zelfs wanneer het IP-adres goed is geconfigureerd.
Instellen Het MAC-adres en informatie weergeven voor Draadloos LAN 1 Selecteer
Instellen Configuratie-instellingen voor communicatie met een computer 2U6C-00S Specificeer het protocol en de poort als u het apparaat via het netwerk vanaf een computer gebruikt. Ga het apparaat pas configureren voor afdrukken of faxen vanaf een computer nadat u de basisinstelprocedures hebt uitgevoerd. Voor meer informatie raadpleegt u de handleidingen voor de relevante stuurprogramma´s op de website voor de handleidingen. Afdrukprotocollen en WSD-functies configureren(P.
Instellen Afdrukprotocollen en WSD-functies configureren 2U6C-00U Configureer de protocollen die worden gebruikt voor het afdrukken van documenten vanaf een netwerkcomputer. ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) . 1 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P.
Instellen 3 Klik op [OK]. WSD configureren 1 Selecteer [WSD-instellingen] 2 Configureer de instellingen. [Bewerken]. [Gebruik WSD-afdrukken] Schakel dit selectievakje in om af te drukken via WSD. Als u niet afdrukt via WSD, schakelt u het selectievakje uit. [Gebruik WSD-bladeren] Schakel dit selectievakje in om via WSD informatie over het apparaat op te halen van een computer. Dit selectievakje wordt automatisch ingeschakeld wanneer u het selectievakje [Gebruik WSD-afdrukken] inschakelt.
Instellen (P. 474) WSD-netwerkapparaten configureren ● De WSD-netwerkapparaten kunnen worden toegevoegd vanuit de printermap. Open de printermap ( De printermap weergeven(P. 716) ) , klik op [Een toestel toevoegen] of [Een printer toevoegen] en volg de aanwijzingen op het scherm. Voor meer informatie over het installeren van het stuurprogramma voor het WSD-netwerk, raadpleegt u de handleidingen voor de relevante stuurprogramma´s op de website voor de handleidingen.
Instellen Printerpoorten configureren 2U6C-00W Er kunnen afdrukfouten optreden wanneer het IP-adres van de machine is gewijzigd of wanneer er een printer is toegevoegd via de printermap van Windows. Deze fouten zijn meestal het gevolg van onjuiste printerpoortinstellingen. Zo kan er een onjuist poortnummer of type poort zijn opgegeven. In dergelijke situaties mislukt het afdrukken omdat de documentgegevens niet aankomen op de machine.
Instellen Standaard TCP/IP Poort Dit is een standaard Windows poort. Als u dit type poort gebruikt, moet u iedere keer als het IP-adres van het apparaat is veranderd een nieuwe poort toevoegen. Selecteer dit type poort als u het apparaat in een IPv6 omgeving gebruikt en u geen MFNP poort kunt toevoegen. Een MFNP poort toevoegen 1 Klik op [Poort toevoegen]. 2 Selecteer [Canon MFNP Port] bij [Beschikbare poorttypen] en klik op [Nieuwe poort].
Instellen ● Als het volgende scherm verschijnt, volg dan de aanwijzingen op het scherm. * Als u het [Apparaattype] selecteert, selecteer dan [Canon Network Printing Device with P9100] onder [Standaard]. 5 Klik op [Voltooien]. 6 Klik op [Sluiten]. Het type poort of het poortnummer wijzigen Als het afdrukprotocol (LPD of RAW) aan de apparaatzijde is veranderd ( Afdrukprotocollen en WSDfuncties configureren(P. 41) ) of het poortnummer is veranderd ( Poortnummers wijzigen(P.
Instellen ● Als u [Raw] hebt geselecteerd, verandert u het [Poortnummer]. ● Als u [LPR] hebt geselecteerd, voer dan "lp" in in [Naam Wachtrij]. 3 4 Klik op [OK]. Klik op [Sluiten]. KOPPELINGEN Een printserver instellen(P.
Instellen Een printserver instellen 2U6C-00X Het installeren van een printserver (afdrukserver) betekent dat u de computer kunt ontlasten die u gebruikt om af te drukken. Ook kunt u met behulp van de printserver de stuurprogramma's op iedere computer installeren via het netwerk, zodat u niet zo veel werk hebt om de stuurprogramma´s per computer te installeren met behulp van de meegeleverde CD-ROM/DVD-ROM.
Instellen ● Deze bewerking is noodzakelijk als u de stuurprogramma's via de printserver wilt installeren op computers met een andere bitarchitectuur. 1 Klik op [Extra stuurprogramma's]. 2 Schakel het selectievakje in van de bitarchitectuur van andere computers en klik op [OK]. ● Selecteer extra stuurprogramma's uit de volgende opties in overeenstemming met het besturingssysteem van de afdrukserver.
Instellen 2 Dubbelklik op de gedeelde printer. 3 Volg de instructies op het scherm om de stuurprogramma's te installeren. KOPPELINGEN Afdrukken vanaf een computer(P.
Instellen De machine configureren voor uw netwerkomgeving 2U6C-00Y De configuratie van een netwerk varieert naargelang de functie van het netwerk. Het apparaat is ontworpen voor compatibiliteit met zo veel mogelijk netwerkconfiguraties en ondersteunt om die reden verschillende technologieën. Overleg met de netwerkbeheerder en kies voor een configuratie die aansluit bij uw netwerkomgeving. Ethernet-instellingen configureren(P. 52) De maximale verzendeenheid wijzigen(P.
Instellen Ethernet-instellingen configureren 2U6C-010 Ethernet is een standaard voor het uitwisselen van gegevens in een lokaal netwerk (LAN). U kunt de communicatiemodus en het type Ethernet instellen. Over het algemeen is het zo dat u het apparaat kunt gebruiken zonder dat u de standaardinstellingen hoeft te wijzigen ( (P. 478) ), maar u kunt de instellingen wijzigen om deze beter af te stemmen op uw netwerkomgeving. 1 Selecteer
Instellen In deze modus worden gegevens tegelijkertijd verzonden en ontvangen. Deze instelling kunt u voor de meeste omgevingen gebruiken. 3 4 Selecteer . selecteer het type Ethernet. 5 Selecteer . 6 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. KOPPELINGEN De maximale verzendeenheid wijzigen(P. 54) Een wachttijd instellen voor verbinding met een netwerk(P.
Instellen De maximale verzendeenheid wijzigen 2U6C-011 In de meeste Ethernet-netwerken is 1500 bytes de maximale grootte van een gegevenspakket dat kan worden verzonden. Een pakket is het blok met gegevens waarin de oorspronkelijke gegevens worden opgedeeld voordat ze worden verzonden. De maximale verzendeenheid (MTU) kan per netwerk verschillen. Wijzig de instellingen van het apparaat indien nodig. Neem voor meer informatie contact op met de netwerkbeheerder. 1 Selecteer
Instellen Een wachttijd instellen voor verbinding met een netwerk 2U6C-012 Als in een netwerk redundante connectiviteit wordt aangeboden door de aanwezigheid van verschillende switching hubs of bridges, moet er een mechanisme zijn om te voorkomen dat pakketten in een oneindige lus terechtkomen. Een efficiënte oplossing is dus om voor elke switch-poort een bepaalde rol te definiëren.
Instellen DNS configureren 2U6C-013 DNS (Domain Name System) is een service voor naamomzetting waarmee de naam van een host (of domein) wordt gekoppeld aan een IP-adres. Configureer de benodigde instellingen voor DNS, mDNS of DHCP. De procedures voor het configureren van DNS zijn verschillend voor IPv4 en IPv6. ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) .
Instellen [Instellingen DHCP-opties] [Hostnaam verkrijgen] Schakel dit selectievakje in om Optie 12 in te schakelen en de hostnaam te verkrijgen van de DHCPserver. [DNS dynamische update] Schakel dit selectievakje in om Optie 81 in te schakelen en de DNS-records dynamisch bij te werken via de DHCP-server. [DNS-serveradres verkrijgen] Schakel dit selectievakje in als u Optie 6 wilt inschakelen en een DNS-server wilt ophalen van de DHCP-server.
Instellen [DNS dynamische update] Schakel dit selectievakje in als u de DNS-records dynamisch wilt bijwerken wanneer het IP-adres van het apparaat verandert. Wanneer u een interval wilt instellen tussen updates, voert u de tijd in uren in het vak [DNS dynamisch update-interval] in. [mDNS-instellingen] [Gebruik mDNS] mDNS (multicast DNS) wordt ondersteund door Bonjour en is een protocol voor het koppelen van een hostnaam aan een IP-adres zonder DNS te gebruiken.
Instellen [Gebruik dezelfde hostnaam/domeinnaam als IPv4] Schakel het selectievakje in als u de host- en domeinnamen van IPv4 wilt gebruiken. [Hostnaam] Typ hier alfanumerieke tekens voor de hostnaam van het apparaat dat u wilt registreren op de DNS-server. [Domeinnaam] Typ hier alfanumerieke tekens voor de naam van het domein waarvan de machine deel uitmaakt, zoals 'voorbeeld.com'.
Instellen SMB configureren 2U6C-014 SMB (Server Message Block) is een protocol voor het delen van bronnen, zoals bestanden en printers, met meerdere apparaten in een netwerk. Het apparaat maakt gebruik van SMB om gescande documenten op te slaan in een gedeelde map. Afhankelijk van het netwerk, moet u de NetBIOS-naam en een werkgroepnaam instellen.
Instellen [NetBIOS-naam] Gebruik alfanumerieke tekens voor de NetBIOS-naam van het apparaat. [Werkgroepnaam] Gebruik alfanumerieke tekens voor de naam van de werkgroep waarvan het apparaat deel uitmaakt. ● NetBIOS-namen of werkgroepnamen die beginnen met een sterretje (*) kunnen niet worden geregistreerd op een WINS-server. 6 Klik op [OK]. 7 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. KOPPELINGEN WINS configureren(P.
Instellen WINS configureren 2U6C-015 WINS (Windows Internet Name Service) is een service voor naamomzetting waarmee een NetBIOS-naam (de naam van een computer of printer in een SMB-netwerk) wordt gekoppeld aan een IP-adres. U moet de WINS-server opgeven om WINS in te schakelen. ● Als u instellingen voor de WINS-server wilt opgeven, moeten de NetBIOS-naam en de werkgroepnaam zijn ingesteld. SMB configureren(P. 60) ● Deze functie is niet beschikbaar in een IPv6-netwerk.
Instellen Voer het IP-adres van de WINS-server in. ● Als het IP-adres van de WINS-server wordt verkregen van een DHCP-server, heeft het verkregen IP-adres prioriteit boven het IP-adres dat is ingevoerd in het vak [WINS-serveradres]. 6 Klik op [OK]. 7 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Instellingen selecteren vanaf het bedieningspaneel ● De WINS-instellingen zijn ook bereikbaar via
Instellen LDAP-servers registreren 2U6C-016 Als er een LDAP-server is geïmplementeerd in het netwerk, kunt u faxnummers en emailadressen zoeken op de server. Deze nummers en adressen kunt u vervolgens als bestemmingen opgeven of in het adresboek opslaan. NB. als de authenticatie voor de zendfunctie ( LDAP-Server-authenticatie(P. 367) ) is ingeschakeld, moet u de server die wordt gebruikt voor authenticatie, registreren.
Instellen [Servernaam] Voer de naam in die moet worden toegewezen aan de LDAP-server. [Serveradres] Typ het IP-adres van de LDAP-server of voer alfanumerieke tekens in voor de hostnaam van de server (voorbeeld: ldap.voorbeeld.com). [Serveradres] en DNS ● Let op de volgende punten om fouten te voorkomen bij het zoeken naar bestemmingen: - Als de hostnaam is opgegeven bij [Serveradres], moet er een DNS-server beschikbaar zijn in het netwerk.
Instellen [Inloggegevens] Selecteer [Niet gebruiken], [Gebruik] of [Gebruik (beveiligingsauthenticatie)], afhankelijk van het type verificatie dat wordt gebruikt door de LDAP-server. Als [Gebruik] of [Gebruik (beveiligingsauthenticatie)] is geselecteerd, moet u een gebruikersnaam en wachtwoord opgeven. [Niet gebruiken] [Gebruik] [Gebruik (beveiligingsauthenticatie)] Met deze optie wordt de machine niet geverifieerd met behulp van de aanmeldingsgegevens.
Instellen [Servernaam] Voer de naam in die moet worden toegewezen aan de LDAP-server. [Serveradres] Typ het IP-adres van de LDAP-server of voer alfanumerieke tekens in voor de hostnaam van de server (voorbeeld: ldap.voorbeeld.com). [Serveradres] en DNS ● Let op de volgende punten om fouten te voorkomen bij het zoeken naar bestemmingen: - Als de hostnaam is opgegeven bij [Serveradres], moet er een DNS-server beschikbaar zijn in het netwerk.
Instellen [Kenmerk gebruikersnaam] Voer de attribuutnaam in die moet worden vergeleken met een gebruikersnaam die is ingevoerd tijdens verificatie, en die bestaat uit alfanumerieke tekens (bijvoorbeeld: 'sAMAccountName'). ● Niet vereist als [Gebruik (beveiligingsauthenticatie)] is geselecteerd in [Inloggegevens]. [Kenmerk e-mailadres] Voer de attribuutnaam in die moet worden gebruikt voor het verkrijgen van een e-mailadres van de verificatieserver, en die bestaat uit alfanumerieke tekens.
Instellen De machine bewaken en bedienen met SNMP 2U6C-017 SNMP (Simple Network Management Protocol) is een protocol voor het bewaken en aansturen van communicatieapparaten in een netwerk dat werkt met MIB (Management Information Base). De machine ondersteunt SNMPv1, en SNMPv3 met extra beveiliging. U kunt de status van de machine controleren vanaf een computer wanneer u documenten afdrukt of de UI op afstand gebruikt. U kunt SNMPv1 of SNMPv3 inschakelen, of beide versies tegelijk.
Instellen 4 Klik op [Bewerken]. 5 Geef instellingen voor SNMPv1 op. ● Als u de SNMPv1-instellingen niet hoeft te wijzigen, gaat u verder met de volgende stap. [Gebruik SNMPv1] Schakel dit selectievakje in om SNMPv1 in te schakelen. De overige instellingen voor SNMPv1 kunt u alleen opgeven als dit selectievakje is ingeschakeld. [Gebruik community-naam 1]/[Gebruik community-naam 2] Schakel het selectievakje in om een Community-naam op te geven.
Instellen [Gebruik SNMPv3] Schakel dit selectievakje in om SNMPv3 in te schakelen. De overige instellingen voor SNMPv3 kunt u alleen opgeven als dit selectievakje is ingeschakeld. [Gebruiker inschakelen] Schakel dit selectievakje in om [Gebruikersinstellingen 1]/[Gebruikersinstellingen 2]/[Gebruikersinstellingen 3] in te schakelen. Schakel een selectievakje uit om de desbetreffende gebruikersinstellingen uit te schakelen. [Gebruikersnaam] Gebruik alfanumerieke tekens voor de gebruikersnaam.
Instellen 7 Geef instellingen op voor het verkrijgen van informatie voor het beheren van printers. ● Met SNMP kunt u gegevens voor het beheren van printers, zoals afdrukprotocollen en printerpoorten, controleren en periodiek opvragen bij een computer in het netwerk. [Printerbeheerinformatie verkrijgen van host] Schakel het selectievakje in om via SNMP de gegevens voor printerbeheer van het apparaat te bewaken. Als u geen printerbeheerinformatie wilt bewaken, schakelt u het selectievakje uit.
Instellen Andere netwerkinstellingen 2U6C-018 Configureer de volgende items, al naargelang uw netwerkomgeving. FTP PASV-modus configureren(P. 73) SNTP configureren(P. 73) Het apparaat beheren vanuit de Apparaatbeheersystemen(P. 75) FTP PASV-modus configureren PASV is een FTP-communicatiestand die wordt gebruikt voor bestandsoverdracht. U kunt alleen verbinding maken met een FTP-server via een firewall met de PASV-stand. Controleer eerst dat de PASV-stand is ingesteld op de FTP-server.
Instellen 4 Klik op [Bewerken]. 5 Schakel het selectievakje [Gebruik SNTP] in en geef de benodigde instellingen op. [Gebruik SNTP] Schakel het selectievakje in als u SNTP wilt gebruiken voor synchronisatie. Als u SNTP niet wilt gebruiken, schakelt u het selectievakje uit. [NTP-servernaam] Voer het IP-adres van de NTP of de SNTP-server in. Als DNS beschikbaar is in het netwerk, kunt u een hostnaam (of FQDN) invoeren die bestaat uit alfanumerieke tekens. (Voorbeeld: ntp.example.com).
Instellen Het apparaat beheren vanuit de Apparaatbeheersystemen U kunt allerlei gegevens van netwerkapparatuur verzamelen en beheren door software voor apparaatbeheer, zoals iW Management Console*, te integreren in het netwerk. Informatie zoals apparaatinstellingen en foutenlogboeken wordt opgehaald en gedistribueerd via de servercomputer.
Instellen [Reageren op Discovery] Schakel het selectievakje in als het apparaat moet reageren op pakketten voor Multicast Discovery van software voor apparaatbeheer en u bewaking door software voor apparaatbeheer wilt inschakelen. ● Als u het poortnummer wilt wijzigen voor Multicast Discovery, raadpleegt u wijzigen(P. 380) . Poortnummers [Bereiknaam] Als u het apparaat wilt toevoegen aan een bepaald bereik, typt u hier tekens voor de naam van het bereik. 3 Klik op [OK].
Instellen Geef aan hoe vaak het apparaat informatie over de status van de stroomvoorziening moet verstrekken aan de software voor apparaatbeheer. 3 5 Klik op [OK]. Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. ◼ Instellingen configureren voor communicatie tussen het apparaat en plug-ins U kunt de instellingen opgeven om communicatie tussen het apparaat en iW Management Console plug-ins in te schakelen.
Instellen Stuurprogramma´s installeren 2U6C-019 Installeer de verschillende stuurprogramma's en bijbehorende software op uw computer. 1 Realiseer de vereiste voorbereiding voordat u verder gaat met de installatie. ● Installeer vooraf de optionele apparaten op de hoofdeenheid. Als optie verkrijgbare apparatuur(P. 705) ● Als het apparaat een CD-ROM/DVD-ROM heeft, plaatst u de CD-ROM/DVD-ROM in het station op de computer.
Instellen Begininstellingen configureren voor faxfuncties 2U6C-01A 1660-01J Volg stappen 1 - 4 hieronder om de faxinstellingen te configureren. Bepaal eerst welke ontvangstmodus het best aansluit bij uw situatie en volg dan de aanwijzingen op het scherm om de bijbehorende instellingen te configureren. Als u meer wilt weten over een bepaalde stap, klikt u op de koppeling om naar het desbetreffende gedeelte te gaan. Stap 1 Bepalen welke faxontvangstmodus u wilt gebruiken(P.
Instellen Bepalen welke faxontvangstmodus u wilt gebruiken 2U6C-01C U kunt de faxinstellingen pas configureren als u hebt bepaald welke ontvangstmodus het best aansluit bij het beoogde gebruik. Beoogd gebruik Ontvangstmodus Alleen fax gebruiken/nooit telefoon gebruiken Kies deze instelling als u het apparaat uitsluitend wilt gebruiken voor het ontvangen van faxen en u de telefoon of optionele handset niet gaat gebruiken.
Instellen Het faxnummer en de naam van het apparaat registreren 2U6C-01E Registreer het faxnummer en de naam van het apparaat. Deze gegevens worden afgedrukt aan het begin van pagina's die u verstuurt. 1 Selecteer
Instellen De ontvangstmodus selecteren 2U6C-01F Selecteer vooraf de ontvangstmodus die het best aansluit bij het beoogde gebruik ( faxontvangstmodus u wilt gebruiken(P. 80) ). 1 Selecteer . 2 Selecteer de ontvangstmodus. Bepalen welke ● Selecteer of om de ontvangstmodus te selecteren voor de handelingen die u wilt verrichten. ● Het is mogelijk dat u handmatig andere ontvangstmodi dan hieronder kunt instellen, maar dit verschilt per land of regio. Faxen ontvangen(P.
Instellen De telefoonlijn aansluiten 2U6C-01H 1660-01S Sluit de telefoonlijn aan op het apparaat. 1 Sluit de telefoonlijn aan op het apparaat. ● Sluit het meegeleverde telefoonsnoer aan op de telefoonaansluiting ( ) van het apparaat en op de wanddoos. ● Als u een telefoon of antwoordapparaat gebruikt, moet u de aansluiting voor een externe telefoon ( ) van het apparaat gebruiken. ● Als u een optionele handset gebruikt, moet u de aansluiting voor de handset ( ) van het apparaat gebruiken.
Instellen KOPPELINGEN Basishandelingen voor het verzenden van faxen(P. 217) Faxen ontvangen(P.
Instellen Scaninstellingen configureren 2U6C-01J U kunt gescande originele documenten alleen rechtstreeks per e-mail of I-Fax verzenden of opslaan in gedeelde mappen of op een FTP-server als u het netwerk configureert. De Instel-tool Zendfunctie, een applicatie die bij het apparaat wordt geleverd, zal u helpen bij de vereiste installatie. Voer de noodzakelijke configuratie uit, afhankelijk van uw doel en van de netwerkomgeving.
Instellen Het gebruik van het apparaat als een scanner voorbereiden 2U6C-01K Om dit apparaat als een scanner te gebruiken, moet u vóór gebruik de nodige voorbereidingen treffen, inclusief het installeren van de software op een computer. Voor meer informatie raadpleegt u de handleidingen voor de relevante stuurprogramma's op de website voor de handleidingen.
Instellen Instelprocedure voor e-mail verzenden / I-Faxes verzenden & ontvangen 2U6C-01L Controleer de onderstaande punten voordat u het apparaat gaat configureren voor het scannen naar e-mail. Zorg ervoor dat de machine en de computer op de juiste manier met elkaar zijn verbonden. Verbinding maken met een draadloos LAN(P. 18) Verbinding maken met een bekabeld LAN(P. 17) Zorg ervoor dat u over de volgende gegevens beschikt: ● Het IP-adres van het apparaat. Netwerkinstellingen weergeven(P.
Instellen Basisinstellingen voor e-mail configureren 2U6C-01R Dit gedeelte beschrijft hoe u met behulp van het Instel-tool Zendfunctie configureert. Met behulp van het Instel-tool Zendfunctie kunt u ook e-mailadressen opslaan in het adresboek. ● Het Instel-tool Zendfunctie is een hulpmiddel voor het configureren van de e-mailinstellingen.
Instellen Als het apparaat niet wordt weergegeven in [Apparatenlijst] ● Klik op [Opnieuw zoeken]. Als het probleem blijft optreden, klikt u op [Zoeken op IP-adres], typt u het IP-adres van het apparaat en klikt u op [OK]. 6 2 Controleer de instellingen en bevestig deze door op [OK] te klikken. Klik op [Start]. ● Als het aanmeldingsscherm wordt weergegeven, typt u de juiste ID en pincode in de daarvoor bestemde tekstvakken en klikt u op [Inloggen]. 3 Klik op [Instellingen voor verzenden naar e-mail].
Instellen [Favorietnummer] Met het Instel-tool Zendfunctie kunt u een e-mailadres opslaan in het onderdeel van het adresboek. Selecteer een nummer in de vervolgkeuzelijst. [Naam voor favorietnummer] Voer de naam in voor de bestemming die u wilt opslaan. Kies een naam die u eenvoudig kunt terugvinden in het adresboek. [Instellingen voor verzendbestemming] [E-mailadres bestemming] Voer het e-mailadres in waarnaar gescande originelen moeten worden verstuurd.
Instellen Communicatie-instellingen voor E-mail/I-Fax configureren 2U6C-01S Configureer met de UI op afstand de gedetailleerde instellingen voor het verzenden en ontvangen, zoals de instellingen voor het gebruik van het apparaat voor het verzenden en ontvangen van I-Faxen en de instellingen voor POP-verificatie en versleuteling of communicatie, voordat u e-mailberichten of I-Faxen verzendt. Neem contact op met uw provider of de netwerkbeheerder en vraag de instellingen die u nodig hebt.
Instellen [Gebruikersnaam] Voer met alfanumerieke tekens de gebruikersnaam in voor het opgegeven e-mail-account wanneer een POP3-server wordt gebruikt. [Wachtwoord instellen/wijzigen] U kunt het wachtwoord instellen of wijzigen wanneer een POP3-server wordt gebruikt, door dit selectievakje in te schakelen en alfanumerieke tekens in te voeren in [Wachtwoord]. De instellingen opgeven die nodig zijn voor I-Fax-ontvangst [POP RX] Schakel het selectievakje in als u I-Faxen wilt ontvangen.
Instellen [Gebruik APOP-authenticatie] Schakel het selectievakje in om het wachtwoord tijdens het verificatieproces te coderen met APOP. SMTP-verificatie configureren Als u SMTP-verificatie (SMTP AUTH) gebruikt, worden op het moment van het verzenden van e-mail of I-Fax, de gebruikers geverifieerd aan de hand van een gebruikersnaam en wachtwoord.
Instellen ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. ● Afhankelijk van het netwerk dat u gebruikt, moet u mogelijk de instelling van de SMTP- of POP3-poort wijzigen ( Poortnummers wijzigen(P. 380) ). Neem voor meer informatie contact op met uw internetprovider of de netwerkbeheerder. KOPPELINGEN Instelprocedure voor e-mail verzenden / I-Faxes verzenden & ontvangen(P. 87) Basisinstellingen voor e-mail configureren(P. 88) Basishandelingen voor het scannen van originelen(P.
Instellen Procedure om een gedeelde map in te stellen als een opslaglocatie 2U6C-01U Controleer de onderstaande punten voordat u het apparaat gaat configureren voor het scannen naar gedeelde mappen. Zorg ervoor dat de machine en de computer op de juiste manier met elkaar zijn verbonden. Verbinding maken met een draadloos LAN(P. 18) Verbinding maken met een bekabeld LAN(P. 17) Zorg ervoor dat u over de volgende gegevens beschikt: ● Het IP-adres van het apparaat. Netwerkinstellingen weergeven(P.
Instellen Een gedeelde map instellen als een opslaglocatie 2U6C-01W Het scannen naar gedeelde mappen wordt ook wel "scannen naar SMB" genoemd omdat de functie werkt met SMB (Server Message Block), een technologie van Windows. SMB is een protocol voor het delen van bronnen, zoals bestanden en printers, met meerdere apparaten in een netwerk ( SMB configureren(P. 60) ).
Instellen Als het apparaat niet wordt weergegeven in [Apparatenlijst] ● Klik op [Opnieuw zoeken]. Als het probleem blijft optreden, klikt u op [Zoeken op IP-adres], typt u het IP-adres van het apparaat en klikt u op [OK]. 6 2 Controleer de instellingen en bevestig deze door op [OK] te klikken. Klik op [Start]. ● Als het aanmeldingsscherm wordt weergegeven, typt u de juiste ID en pincode in de daarvoor bestemde tekstvakken en klikt u op [Inloggen].
Instellen [Registratie] [Favorietnummer] Met het Instel-tool Zendfunctie kunt u een gedeelde map voor het opslaan van gescande documenten toevoegen aan het onderdeel van het adresboek. Selecteer een nummer in de vervolgkeuzelijst. [Naam voor favorietnummer] Voer de naam in voor de bestemming die u wilt opslaan. Kies een naam die u eenvoudig kunt terugvinden in het adresboek.
Instellen Procedure om een FTP Server in te stellen als een opslaglocatie 2U6C-01X Controleer de onderstaande punten voordat u het apparaat gaat configureren voor het scannen naar een FTP-server. Zorg ervoor dat de machine en de computer op de juiste manier met elkaar zijn verbonden. Verbinding maken met een draadloos LAN(P. 18) Verbinding maken met een bekabeld LAN(P. 17) Zorg ervoor dat u over de volgende gegevens beschikt: ● Het IP-adres van het apparaat. Netwerkinstellingen weergeven(P.
Basishandelingen Basishandelingen Basishandelingen .......................................................................................................................................... 102 Onderdelen en de bijbehorende functies ........................................................................................................ 106 Voorzijde ......................................................................................................................................................
Basishandelingen Veelgebruikte instellingen opslaan ............................................................................................................... 171 De standaard instellingen voor functies wijzigen ........................................................................................... 173 Instelgeluiden ................................................................................................................................................... 175 De slaapstand instellen ........
Basishandelingen Basishandelingen 2U6C-01Y In dit hoofdstuk worden de basishandelingen beschreven, zoals het gebruiken van het bedieningspaneel of het plaatsen van het papier. Het gaat hier om handelingen die vaak worden uitgevoerd om de functies van het apparaat te gebruiken. ◼ Onderdelen en de bijbehorende functies In dit gedeelte wordt aandacht besteed aan de externe en interne onderdelen van het apparaat en hun functie.
Basishandelingen ◼ Originelen plaatsen In dit gedeelte wordt beschreven hoe u originelen op de glasplaat en in de documentinvoer plaatst. plaatsen(P. 135) Originelen ◼ Papier laden Dit gedeelte beschrijft hoe u het papier in de papierlade en de multifunctionele lade plaatst. Papier laden(P. 139) ◼ Het display aanpassen Dit gedeelte beschrijft hoe u knoppen opnieuw indeelt of sneltoetsen genereert om in het display weergegeven schermen makkelijker te kunnen gebruiken. Het display aanpassen(P.
Basishandelingen ◼ Instelgeluiden In dit gedeelte wordt uitgelegd hoe u het volume van de verschillende systeemgeluiden kunt aanpassen, bijvoorbeeld van het geluid dat u hoort als het verzenden van een fax is voltooid of als er een fout is opgetreden. Instelgeluiden(P. 175) ◼ De slaapstand instellen In dit gedeelte wordt beschreven hoe u de slaapstand instelt. De slaapstand instellen(P.
Basishandelingen 105
Basishandelingen Onderdelen en de bijbehorende functies 2U6C-020 In dit gedeelte worden de onderdelen van het apparaat beschreven (buitenzijde, voorzijde, achterzijde en binnenzijde), evenals de functie die ze hebben. Naast de onderdelen van het apparaat die nodig zijn voor het uitvoeren van basishandelingen zoals het laden van papier en het vervangen van tonercartridges, wordt hier ook aandacht besteed aan de toetsen op het bedieningspaneel en het display.
Basishandelingen Voorzijde 2U6C-021 Invoer Hiermee worden originelen automatisch in het apparaat gevoerd om te worden gescand. Als u twee of meer originelen in de invoer plaatst, kunnen ze na elkaar gescand. Documentinvoer(P. 111) USB-poort (voor aansluiting van USB-toestellen) U kunt op deze poort een USB-geheugenapparaat of USB-toetsenbord van een andere fabrikant aansluiten.
Basishandelingen Handgrepen Pak het apparaat vast bij deze handgrepen als u het gaat verplaatsen. De machine verplaatsen(P. 585) Bedieningspaneel Het bedieningspaneel bevat toetsen zoals de toets Start en de toets Stop, een display en statuslampjes. U kunt hier alle bewerkingen uitvoeren en instellingen opgeven. Bedieningspaneel(P. 114) Basisschermen(P. 121) Uitvoerlade Afdrukken worden uitgevoerd via de uitvoerlade. Hoofdschakelaar Hiermee schakelt u de machine in of uit.
Basishandelingen Achterzijde 2U6C-022 USB-poort (voor aansluiting van USB-toestellen) Sluit op deze poort apparaten zoals een USB-toetsenbord van een andere fabrikant aan. LAN-poort Hier kunt u een LAN-kabel aansluiten om de machine te verbinden met een bekabeld LAN-router, enzovoort. Verbinding maken met een bekabeld LAN(P. 17) USB-poort (voor aansluiting van computer) Hier kunt u een USB-kabel aansluiten om de machine te verbinden met een computer.
Basishandelingen Binnenzijde 2U6C-023 Transportgeleider (aan de achterkant) Als het papier in het apparaat vastloopt, til dan de transportgeleider op richting de voorzijde van het apparaat en verwijder het vastgelopen papier. Papierstoringen verhelpen(P. 658) Transportgeleider (aan de voorkant) Als het papier in het apparaat vastloopt, til dan de transportgeleider op richting de achterzijde van het apparaat en verwijder het vastgelopen papier. Papierstoringen verhelpen(P.
Basishandelingen Documentinvoer 2U6C-024 Klep van de documentinvoer Open deze klep als u papierstoringen gaat verhelpen. Papierstoringen in de documentinvoer(P. 660) Glijdende geleiders Stel deze geleiders in voor de breedte van het origineel. Toevoerlade voor originelen Hiermee worden originelen automatisch in het apparaat gevoerd om te worden gescand. Als u twee of meer originelen in de invoer plaatst, kunnen ze na elkaar gescand. Originelen plaatsen(P.
Basishandelingen Multifunctionele lade 2U6C-025 Papiergeleiders Stel de papiergeleiders exact af op de breedte van het geladen papier, zodat het papier mooi recht in de machine wordt gevoerd. Druk op de ontgrendelingspal die in de afbeeldingen met een pijl wordt aangegeven om de geleider te ontgrendelen, zodat u deze kunt verschuiven. Papierlade Trek de papierlade uit als u papier gaat plaatsen. Uitschuifblad Open het uitschuifstuk van de lade als u groot papier gaat plaatsen.
Basishandelingen Papierlade 2U6C-026 Papiergeleiders Stel de papiergeleiders exact af op de grootte van het geladen papier, zodat het papier mooi recht in het apparaat wordt gevoerd. Druk op de ontgrendelingspallen die in de afbeeldingen met pijlen worden aangegeven om de geleiders te ontgrendelen, zodat u deze kunt verschuiven. Ontgrendelingspal (voor het uitschuiven van de papierlade) Als u papier van het formaat Legal gaat plaatsen, moet u de papierlade uitschuiven.
Basishandelingen Bedieningspaneel 2U6C-027 ● De hoek van het bedieningspaneel kan worden ingesteld. Kies een hoek waaronder u het paneel het beste kunt bekijken. De hoek instellen(P. 115) Display Hierop wordt de voortgang van het apparaat en foutstatussen weergegeven. De display is een aanraakscherm, zodat u instellingen kunt opgeven door het scherm direct aan te raken. Basisschermen(P. 121) Basishandeling(P. 128) Toets Geluidsvolume Hiermee kunt u het volume aanpassen. Instelgeluiden(P.
Basishandelingen Het scherm Start(P. 122) Het scherm Start aanpassen(P. 168) Toets Stop Druk op deze toets om het afdrukken en andere bewerkingen te annuleren. Merkteken NFC (Near Field Communication) (Contactloze communicatiemethode) U kunt ook functies gebruiken, zoals afdrukken, door met een mobiel apparaat waarop Canon PRINT Business is geïnstalleerd, over dit merkteken te bewegen. Verbinden met mobiele apparaten(P.
Basishandelingen Het apparaat AAN zetten 2U6C-028 Dit gedeelte beschrijft hoe u het apparaat AAN zet. 1 Controleer of de stekker goed in het stopcontact zit. 2 Druk op de hoofdschakelaar. ➠ Het Start-scherm verschijnt. Bedieningspaneel(P. 114) ● U kunt kiezen welk scherm verschijnt nadat het apparaat AAN is gezet. herstel>(P. 457) KOPPELINGEN Het apparaat UIT zetten(P.
Basishandelingen Het apparaat UIT zetten 2U6C-029 Dit gedeelte beschrijft hoe u het apparaat UIT zet. 1 Druk op de hoofdschakelaar. ● Het kan een tijdje duren voordat het apparaat geheel is uitgeschakeld. Wacht tot het display is gedoofd en trek dan pas de stekker eruit. ● Om het apparaat opnieuw te starten, wacht u minimaal 10 seconden nadat het is uitgezet. ● U kunt voor iedere dag van de week de tijd opgeven, en een instelling configureren om het apparaat automatisch UIT te zetten.
Basishandelingen Op een vaste tijd UITschakelen 2U6C-02A U kunt een instelling realiseren dat het apparaat iedere dag van de week op een bepaalde tijd automatisch UIT gaat. Hiermee kunt u nutteloos stroomverbruik vermijden dat kan optreden als u nalaat het apparaat UIT te schakelen. Standaard is deze functie niet actief. ● Voor meer informatie over de basishandelingen om het apparaat in te stellen via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) .
Basishandelingen [Zondag] tot [Zaterdag] Voer de tijd in waarop het apparaat UIT moet gaan. Als u op een bepaalde weekdag het vakje leeg laat, is de functie voor die dag niet actief. 5 Klik op [OK].
Basishandelingen Het bedieningspaneel gebruiken 2U6C-02C U kunt het display en de toetsen van het bedieningspaneel gebruiken om apparaatinstellingen te configureren of functies te activeren. Dit gedeelte beschrijft het basisgebruik van het display en de toetsen. Basisschermen(P. 121) Basishandeling(P. 128) Tekst invoeren(P. 131) ● Als u de lichte en donkere delen van het display wilt omkeren: ● Als u de helderheid van het display wilt instellen: (P. 483) (P.
Basishandelingen Basisschermen 2U6C-02E Het scherm Start of het instellingenscherm wordt op het display weergegeven, zodat u kunt beginnen met functies zoals kopiëren en scannen. U kunt ook met de display informatie controleren, zoals foutmeldingen en de bedieningsstatus van het apparaat. Het scherm is ook een aanraakpaneel, dus u kunt bedieningshandelingen uitvoeren door het scherm direct aan te raken. Het scherm Start(P. 122) Het scherm (P. 125) Berichtenvenster(P.
Basishandelingen Het scherm Start 2U6C-02F Het scherm Start wordt weergegeven wanneer u het apparaat inschakelt door op het bedieningspaneel op drukken. Via dit scherm kunt u instellingen opgeven en functies registreren. te Een andere pagina kiezen Kies hiermee een andere pagina in het scherm Start. U kunt ook zijdelings strijken om van pagina te wisselen. Geeft het totaale afdrukvolume weer. weergeven(P.
Basishandelingen Knop Application Library (Toepassingenbibliotheek) Met deze knoppen kunt u dankzij de één-toetsbediening op eenvoudige wijze handige functies uitvoeren. Voor meer informatie raadpleegt u de handleiding voor de Application Library (Toepassingenbibliotheek) op de website met handleidingen. Met behulp van deze functie drukt u een beveiligd document af. Een met pincode beveiligd document afdrukken (Beveiligde afdruk)(P.
Basishandelingen Hiermee kun u meerdere paspoorten op één vel afdrukken. Paspoortkopieën maken(P. 210) Druk hierop voor bedieningsinstructies en oorzaken van/ oplossingen voor fouten. Knoppen voor snelkoppelingen Toon 'Favoriete Instellingen' geregistreerd bij kopiëren, faxen en scannen. Knoppen toevoegen aan het scherm Start(P. 168) KOPPELINGEN Het scherm Start aanpassen(P.
Basishandelingen Het scherm 2U6C-02H Wanneer u selecteert, wordt er een scherm weergegeven waarin u de voortgang kunt controleren van documenten, en ook de status van het apparaat (resterende hoeveelheid toner in de tonercartridge, enzovoort) en netwerkinstellingen, zoals het IP-adres van het apparaat. Hiermee kunt u gegevens bekijken van fouten die zijn opgetreden. Maatregelen bij ieder bericht(P.
Basishandelingen Status en logboeken van gekopieerde, afgedrukte, en verzonden / ontvangen documenten Hiermee geeft u de huidige status van het geselecteerde item weer. Hieronder ziet u het scherm als voorbeeld. Geeft de netwerkinstellingen zoals het IP-adres van het apparaat weer en de status zoals de staat van de draadloze LAN-communicatie. Netwerkinstellingen weergeven(P. 38) Hiermee kunt u een USB-geheugenapparaat veilig verwijderen.
Basishandelingen Berichtenvenster 2U6C-02J Berichten worden op het scherm weergegeven, bijvoorbeeld als het papier op is of de tonercartridges opraken. Maatregelen bij ieder bericht(P. 633) Als er een fout optreedt In sommige gevallen worden, wanneer er een fout optreedt, instructies weergegeven over hoe u moet reageren. Volg de aanwijzingen op het scherm voor het oplossen van het probleem. Het scherm dat wordt weergegeven wanneer er zich een papierstoring voordoet, wordt hieronder getoond als voorbeeld.
Basishandelingen Basishandeling 2U6C-02K Het display is een aanraakscherm: u bedient het door het aan te raken. Vermijd de volgende handelingen. ● Hierdoor kunnen zich storingen voordoen of kan het display beschadigd raken.
Basishandelingen ◼ Items selecteren Tik op een itemnaam of knop om een selectie te maken. Als u een item per ongeluk aanraakt ● Schuif uw vinger weg en laat los om de selectie te annuleren. Teruggaan naar het vorige scherm ● Tik op om terug te gaan naar het vorige scherm. ◼ Door het scherm bladeren De schuifbalk verschijnt op het scherm wanneer er nog informatie is die niet wordt weergegeven. Wordt de bladerbalk weergegeven, dan kunt u bladeren door in de gewenste richting te vegen. NB.
Basishandelingen ● U kunt verschillende instellingen wijzigen voor het display, zoals de weergavetaal: instellingen>(P. 457) (P. 465) ● U kunt verschillende instellingen voor de bedienbaarheid realiseren, zoals de helderheid van het scherm: (P.
Basishandelingen Tekst invoeren 2U6C-02L Als u tekst of een getal invoert, gebruik dan het scherm-toetsenbord. De numerieke toetsen worden op het scherm weergegeven om uitsluitend cijfers in te voeren. Een ander type teken kiezen Tik op of <1/#> om tijdens het invoeren om te schakelen naar een ander tekentype. ● Om hoofdletters in te voeren, tikt u op . Tekst wissen Telkens als u op drukt, wordt er één teken gewist. U kunt achtereenvolgende tekens wissen door langer ingedrukt te houden.
Basishandelingen Waardebereik ● De tussen haakjes ( ) weergegeven waarden onder het invoervak duiden het waardebereik aan. Als andere knoppen dan de numerieke toetsen worden weergegeven ● Als <+> / <-> of / worden weergegeven, kunt u met behulp van de knoppen de numerieke waarde verhogen of verlagen, of de cursor verplaatsen. Tekens invoeren met een USB-toetsenbord U kunt een toetsenbord op de USB-poort voor USB-apparaten op de Voorzijde(P. 107) of Achterzijde(P.
Basishandelingen Aanmelden bij het apparaat 2U6C-02R Als Afdelings-ID-beheer is ingeschakeld of er zijn Systeembeheerders-ID's geactiveerd, kunt u het apparaat pas gebruiken wanneer u hebt ingelogd. U moet ook inloggen als er beperkingen zijn ingesteld voor het gebruik van de fax- en scanfuncties. Inlog Afdelings-ID beheer(P. 133) Inloggen op Geautoriseerd Verzenden(P.
Basishandelingen Inloggen op Geautoriseerd Verzenden Als de autorisatie-instelling Zend-functie ( LDAP-Server-authenticatie(P. 367) ) is ingeschakeld, wordt het inlogscherm Geautoriseerd Zenden weergegeven wanneer de fax- of scanfunctie wordt gebruikt. 1 Voer uw gebruikersnaam in. 1 Selecteer . 2 Voer uw gebruikersnaam in. ● Voor het invoeren van tekst raadpleegt u 2 Voer het wachtwoord in. 1 Selecteer . 2 Voer het wachtwoord in. 3 Tekst invoeren(P. 131) .
Basishandelingen Originelen plaatsen 2U6C-02S Leg originelen op de glasplaat of in de documentinvoer. Gebruik de glasplaat voor het scannen van dikke of ingebonden documenten, zoals boeken. U kunt twee of meer vellen van originelen in de invoer leggen, zodat ze aansluitend kunnen worden gescand. Voor informatie over laadbare formaten, enzovoort, zie Hoofdeenheid(P. 685) of Documentinvoer(P. 688) . Originelen op de glasplaat plaatsen(P. 136) Originelen in de documentinvoer plaatsen(P.
Basishandelingen Originelen op de glasplaat plaatsen 1 Open de documentinvoer. 2 Leg het origineel met de afdrukzijde naar beneden op de glasplaat. ● Leg het origineel in de linkerbovenhoek van de glasplaat. ● Om transparante originelen (bijvoorbeeld calqueerpapier of transparanten) te scannen, bedekt u deze met een vel normaal, wit papier. 3 Sluit de documentinvoer voorzichtig. ➠ Het apparaat is gereed om het document te scannen.
Basishandelingen 2 Schuif de glijdende geleiders uit elkaar. ● Schuif de glijdende geleiders naar de zijkant totdat de tussenruimte iets breder is dan de werkelijke breedte van het origineel. 3 Waaier de stapel originelen uit en maak er een rechte stapel van. ● Waaier de stapel originelen in delen uit en tik een paar keer op een vlak oppervlak om de stapel mooi recht te maken. 4 Leg originelen met de afdrukzijde naar boven in de invoer. ● Plaats originelen in de liggende afdrukrichting.
Basishandelingen Schuif de glijdende geleiders goed tegen de randen van het origineel ● Als de glijdende geleiders te los of te strak zitten, kan het papier verkeerd worden ingevoerd of kunnen er papierstoringen ontstaan. Tijdens het scannen van originelen ● Voeg geen originelen toe en verwijder er ook geen. Wanneer het scannen is voltooid ● Haal de gescande originelen uit de documentinvoer om papierstoringen te voorkomen.
Basishandelingen Papier laden 2U6C-02U U kunt papier in de papierlade of de multifunctionele lade plaatsen. Gebruik de papierlade voor het laden van de papiersoort die u meestal gebruikt. De papierlade is handig wanneer u grote hoeveelheden papier gebruikt. Gebruik de multifunctionele invoer wanneer u tijdelijk een formaat of type papier wilt gebruiken dat niet in de papierlade is geplaatst. Raadpleeg Geschikt papier(P. 689) voor beschikbare papiersoorten en -formaten. Papier Richtlijnen voor papier(P.
Basishandelingen Behandeling en opslag van papier ● U wordt geadviseerd het papier na het uitpakken zo snel mogelijk te gebruiken. Papier dat nog niet wordt gebruikt, moet weer in de originele verpakking worden gedaan en op een platte ondergrond worden bewaard. ● Bewaar het papier in de originele verpakking om het te beschermen tegen vocht of droogte. ● Bewaar het papier niet op een manier waardoor het kan krullen of vouwen. ● Bewaar het papier niet verticaal en plaatst niet te veel papier op elkaar.
Basishandelingen Papier in de papierlade plaatsen 2U6C-02W 1660-02Y Laad het papier dat u normaliter in de papierlade gebruikt. Als u wilt afdrukken op papier dat niet in de papierlade is geplaatst, laad het dan in de multifunctionele lade. Papier in de multifunctionele lade plaatsen(P. 147) Papier van gangbaar formaat plaatsen(P. 141) Papier van aangepast formaat plaatsen(P. 143) ● Voor A5-formaat papier, raadpleegt u Papier van gangbaar formaat plaatsen(P. 141) en laadt u het in liggende afdrukstand.
Basishandelingen 2 Verstel de positie van de papiergeleiders zo dat ze overeenkomen met het papierformaat dat u wilt gebruiken. ● Terwijl u de ontgrendelingspal ingedrukt houdt, beweegt u de papiergeleider om de opstaande rand gelijk te stellen met de markering voor het gewenste papierformaat. Legal papier plaatsen ● Druk op de ontgrendelingspal en schuif de papierlade uit. 3 Plaats het papier zo dat de rand van de papierstapel de papiergeleider aan de achterzijde van de papierlade raakt.
Basishandelingen ● Wanneer wordt afgedrukt op papier met een logo, raadpleeg dan plaatsen(P. 152) . 4 Voorbedrukt papier Schuif de papierlade in de machine. ● Als u de papierlade plaatst met ingesteld op , verschijnt een bevestigingsscherm. » Ga verder met (P. 563) Het type en formaat papier opgeven dat in de papierlade is geplaatst(P.
Basishandelingen 2 Schuif de papiergeleiders naar de zijkanten van de papierlade. ● Druk op de ontgrendelingspal om de papiergeleiders naar de zijkanten van de papierlade te schuiven. Wanneer u papier plaatst dat langer is dan het A4-formaat ● Druk op de ontgrendelingspal en schuif de papierlade uit. 3 Leg het papier zo dat de rand van de papierstapel net de voorzijde van de papierlade raakt. ● Plaats het papier met de afdrukzijde naar beneden.
Basishandelingen ● Zorg ervoor dat de stapel papier niet hoger is dan de markering voor het maximale aantal vellen ( ). Als u te veel papier plaatst, kan dit papierstoringen veroorzaken. ● Wanneer wordt afgedrukt op papier met een logo, raadpleeg dan plaatsen(P. 152) . 4 Voorbedrukt papier Schuif de papiergeleiders tegen de randen van het papier. ● Druk op de ontgrendelingspal en schuif de papiergeleiders naar binnen totdat ze stevig tegen de randen van het papier zitten.
Basishandelingen ● U kunt afdrukken op de achterzijde van bedrukt papier. Strijk het bedrukte papier glad en leg het in de papierlade, met de afdrukzijde omlaag of in de multifunctionele lade ( Papier in de multifunctionele lade plaatsen(P. 147) ) met de afdrukzijde omhoog. - Als u de multifunctionele invoer gebruikt, plaats dan steeds één vel papier tegelijk. - U kunt alleen papier gebruiken dat met dit apparaat is bedrukt. - U kunt niet afdrukken op de zijde die eerder is bedrukt.
Basishandelingen Papier in de multifunctionele lade plaatsen 2U6C-02X 1660-030 Als u wilt afdrukken op papier dat niet in de papierlade is geplaatst, laad het dan in de multifunctionele lade. Laad het papier dat u normaliter in de papierlade gebruikt. Papier in de papierlade plaatsen(P. 141) Zorg ervoor dat u de papierlade plaatst ● Het apparaat drukt alleen af als de papierlade is geplaatst, zelfs als er papier is geladen in de sleuf voor multifunctionele invoer.
Basishandelingen 3 Schuif de papiergeleiders naar de zijkanten van de papierlade. ● Druk op de ontgrendelingspal om de papiergeleiders naar de zijkanten van de papierlade te schuiven. 4 Plaats het papier in de multifunctionele lade tot het papier stopt. ● Plaats het papier met de afdrukzijde naar boven. ● Waaier de papierstapel uit en tik met de onderkant op een vlak oppervlak om de vellen papier mooi gelijk te leggen.
Basishandelingen 5 Schuif de papiergeleiders tegen de randen van het papier. ● Druk op de ontgrendelingspal en schuif de papiergeleiders naar binnen totdat ze stevig tegen de randen van het papier zitten. Schuif de papiergeleiders stevig tegen de randen van het papier ● Als de papiergeleiders te los of te strak zitten, kan het papier verkeerd worden ingevoerd of kunnen er papierstoringen ontstaan. » Ga verder met Het papierformaat en de papiersoort in de multifunctionele lade opgeven(P.
Basishandelingen Enveloppen plaatsen 2U6C-02Y Strijk de enveloppen glad voordat u ze gaat laden. Let ook op de invoerrichting van de enveloppen en welke kant naar boven wijst. U kunt geen enveloppen in de papierlade laden. Voordat u enveloppen gaat laden(P. 150) In de multifunctionele invoer(P. 151) ● In dit gedeelte wordt uitgelegd hoe u enveloppen in de gewenste richting laadt. Daarnaast worden de stappen besproken die u moet uitvoeren voordat u enveloppen gaat laden.
Basishandelingen 4 Maak van de enveloppen een rechte stapel door ze met de zijkanten op een vlakke ondergrond te stoten. In de multifunctionele invoer Laad enveloppen van het formaat Monarch, COM10, DL of ISO-C5 met de korte zijde naar voren en met de kant zonder lijm (de voorzijde) naar boven. U kunt niet afdrukken op de achterzijde van enveloppen. ● Plaats de enveloppen zo dat de rand met de flap aan de linkerkant zit, zoals in de afbeelding.
Basishandelingen Voorbedrukt papier plaatsen 2U6C-030 Als u papier gebruikt waarop vooraf een logo is afgedrukt, let u bij het plaatsen op de invoerrichting van het papier. Zorg dat het papier goed is geplaatst zodat er op de juiste kant van het papier met een logo wordt afgedrukt. Enkelzijdig afdrukken op papier met logo's(P. 152) Dubbelzijdig afdrukken op papier met logo's(P.
Basishandelingen Afdrukken op papier met logo's in de afdrukrichting Liggend Het papier in de papierlade laden Laad het papier met de kant van het logo (de afdrukzijde) naar beneden. Als u papier in de multifunctionele lade plaatst Laad het papier met de kant van het logo (de afdrukzijde) naar boven.
Basishandelingen Dubbelzijdig afdrukken op papier met logo's Afdrukken op papier met logo's in de afdrukrichting Staand Het papier in de papierlade laden Laad het papier met de voorzijde van het bedrukte papier (de zijde voor de eerste pagina van het document) naar boven. Als u papier in de multifunctionele lade plaatst Laad het papier met de voorzijde van het bedrukte papier (de zijde voor de eerste pagina van het document) naar beneden.
Basishandelingen Afdrukken op papier met logo's in de afdrukrichting Liggend Het papier in de papierlade laden Laad het papier met de voorzijde van het bedrukte papier (de zijde voor de eerste pagina van het document) naar boven. Als u papier in de multifunctionele lade plaatst Laad het papier met de voorzijde van het bedrukte papier (de zijde voor de eerste pagina van het document) naar beneden.
Basishandelingen instelling is vooral handig als u regelmatig zowel enkelzijdig als dubbelzijdig afdrukt. papier schakelen>(P.
Basishandelingen Het type en formaat papier opgeven 2U6C-031 U moet ervoor zorgen dat de instellingen voor het type en formaat papier overeenkomen met het papier dat is geladen. Vergeet dus niet de papierinstellingen aan te passen wanneer u papier gaat laden dat afwijkt van het eerder gebruikte papier. Het type en formaat papier opgeven dat in de papierlade is geplaatst(P. 158) Het papierformaat en de papiersoort in de multifunctionele lade opgeven(P.
Basishandelingen Het type en formaat papier opgeven dat in de papierlade is geplaatst 2U6C-032 1 Selecteer in het scherm Start. 2 Selecteer de doel-papierlade. Het scherm Start(P. 122) ● Wanneer de optionele paper feeder is geïnstalleerd, wordt zijn papierlade ook weergegeven. 3 Selecteer het papierformaat. ● Als het formaat van het geplaatste papier niet zichtbaar is, selecteert u . Papier van aangepast formaat plaatsen 1 Selecteer .
Basishandelingen Papier van A5 formaat plaatsen ● In de liggende afdrukstand, selecteert u . In de staande afdrukstand, selecteert u . Liggende afdrukrichting 4 Staande afdrukrichting Selecteer het papiertype. KOPPELINGEN Papier in de papierlade plaatsen(P. 141) De papierformaten die worden weergegeven, beperken(P. 165) Geschikt papier(P. 689) (P.
Basishandelingen Het papierformaat en de papiersoort in de multifunctionele lade opgeven 2U6C-033 Het onderstaande scherm wordt weergegeven als er papier is geladen in de multifunctionele lade. Volg de aanwijzingen op het scherm om instellingen op te geven voor het formaat en type papier dat is geladen.
Basishandelingen ● Als u het papierformaat dat u vaak gebruikt, vastlegt onder de knoppen tot , kunt u het met één knopdruk oproepen. Een aangepast papierformaat registreren(P. 164) 3 2 Selecteer . Selecteer het papiertype. KOPPELINGEN Papier in de multifunctionele lade plaatsen(P. 147) De papierformaten die worden weergegeven, beperken(P. 165) Geschikt papier(P.
Basishandelingen Standaard papierinstellingen voor de multifunctionele lade registreren 2U6C-034 U kunt standaard-papierinstellingen opslaan voor de multifunctionele lade. Hierdoor hoeft u niet steeds instellingen in te voeren wanneer u altijd hetzelfde papier gebruikt in de multifunctionele lade. ● Als u standaard-papierinstellingen hebt opgegeven, wordt het scherm met papierinstellingen niet meer weergegeven wanneer u papier laadt. U gebruikt dan altijd dezelfde instellingen.
Basishandelingen ● Als u het papierformaat dat u vaak gebruikt, vastlegt onder de knoppen tot , kunt u het met één knopdruk oproepen. Een aangepast papierformaat registreren(P. 164) 3 4 Selecteer . Selecteer het papiertype. KOPPELINGEN Papier in de multifunctionele lade plaatsen(P. 147) De papierformaten die worden weergegeven, beperken(P. 165) Geschikt papier(P.
Basishandelingen Een aangepast papierformaat registreren 2U6C-035 U kunt maximaal drie aangepaste papierformaten opslaan die u regelmatig gebruikt. 1 Selecteer in het scherm Start. 2 Selecteer . 3 Selecteer het registratienummer. Het scherm Start(P. 122) Een instelling verwijderen ● Selecteer 4 . Geef de lengte van de -zijde en -zijde op.
Basishandelingen De papierformaten die worden weergegeven, beperken 2U6C-036 U kunt ervoor zorgen dat alleen papierformaten die u vaak gebruikt, worden getoond in het scherm voor het selecteren van de instelling van het papierformaat. 1 Selecteer in het scherm Start. 2 Selecteer . 3 Selecteer de papierbron waarvoor u de weer te geven papierformaten wilt Het scherm Start(P. 122) begrenzen.
Basishandelingen Automatisch een juiste papierbron voor iedere functie selecteren 2U6C-037 De functie voor het automatisch selecteren van de papierbron voor iedere papierbron in- of uitschakelen. Als deze mogelijkheid is ingesteld op , selecteert het apparaat automatisch voor iedere afdruktaak een papierbron waarin het juiste papierformaat is geladen.
Basishandelingen Het display aanpassen 2U6C-038 Om het scherm Start gebruiksvriendelijker te maken, kunt u het op de gebruiker toesnijden. Daarnaast kunt u efficiënter werken door voor iedere functie uw favoriete instellingen voor het scherm Basisfuncties te registreren. Het scherm Start aanpassen U kunt knoppen voor snelkoppelingen die worden weergegeven in het scherm Start rangschikken naar eigen voorkeur.
Basishandelingen Het scherm Start aanpassen 2U6C-039 U kunt knoppen voor snelkoppelingen die worden weergegeven in het scherm Start toevoegen / wissen naar eigen toepassing of u kunt ze rangschikken naar eigen voorkeur. U kunt de volgorde waarin zij worden weergegeven, wijzigen. Knoppen toevoegen aan het scherm Start(P. 168) Knoppen anders rangschikken(P.
Basishandelingen Geregistreerde knoppen verwijderen ● Schakel het selectievakje voor de naam van de knop die u wilt verwijderen, uit en selecteer . Wanneer u een geregistreerde knop hebt verwijderd, verschijnt een ruimte waar de knop werd weergegeven in het scherm Start. Als het nodig is, kunt u de ruimte wissen. 5 Lees het bericht dat wordt weergegeven en selecteer . ➠ Er wordt een knop voor de pas geselecteerde instellingen toegevoegd aan het Start-scherm.
Basishandelingen Een spatie verwijderen ● Selecteer de spatie die u wilt verwijderen, en selecteer . 5 Selecteer . KOPPELINGEN Basishandeling(P.
Basishandelingen Veelgebruikte instellingen opslaan 2U6C-03A Als u veelgebruikte instellingen registreert als 'favoriete instellingen', kunt u deze snel oproepen wanneer u kopieën maakt, een fax verzendt of scant. Bovendien kunt u gecompliceerde instellingen registreren als 'favoriete instellingen', zodat u ze later snel en gemakkelijk kunt oproepen. Tevens kunt u geregistreerde instelcombinaties aan een sneltoets toewijzen die is weergegeven op het scherm Start.
Basishandelingen 6 Selecteer of u de instellingen wilt registreren als een knop voor een snelkoppeling. ● Als u selecteert, wordt een bericht weergegeven. Bekijk het en selecteer vervolgens . De geregistreerde combinatie van instellingen wordt toegevoegd aan het scherm Start als een sneltoets. ● Als het scherm Start vol is en u kunt de sneltoets niet toevoegen, wis dan met geregistreerde knoppen of spaties. Het scherm Start aanpassen(P.
Basishandelingen De standaard instellingen voor functies wijzigen 2U6C-03C De standaardinstellingen zijn de instellingen die worden weergegeven wanneer u het apparaat inschakelt of selecteert. Als u deze standaardinstellingen afstemt op de bewerkingen die u regelmatig uitvoert, kunt u tijd besparen doordat u niet steeds dezelfde instellingen hoeft op te geven als u een handeling verricht. ◼ Kopie Raadpleeg (P.
Basishandelingen ◼ E-Mail Raadpleeg (P. 532) voor informatie over veranderbare instelitems.
Basishandelingen Instelgeluiden 2U6C-03E De machine produceert in verschillende situaties geluidssignalen, bijvoorbeeld om aan te geven dat het versturen van een fax is voltooid of dat er papier is vastgelopen. U kunt het volume van deze geluiden afzonderlijk instellen. ◼ aanpassen 1 Druk op de toets 2 Pas het volume aan, selecteer . ( ). ● Verplaats de cursor helemaal naar links om het geluid uit te schakelen. ◼ aanpassen 1 Druk op de toets ( ).
Basishandelingen Optie Beschrijving Bevestigingssignaal telkens wanneer op een toets Selecteer (signaal op het bedieningspaneel of een knop op het produceren) of (geen display wordt gedrukt signaal produceren).
Basishandelingen De slaapstand instellen 2U6C-03F In de slaapstand wordt het stroomverbruik verlaagd door de stroomtoevoer naar het bedieningspaneel te onderbreken. Als er gedurende bepaalde tijd geen bewerkingen worden uitgevoerd op de machine, zoals tijdens de op het bedieningspaneel te drukken. lunchpauze, kunt u energie besparen door op Wanneer de slaapmodus is ingeschakeld ● Het lampje brandt groen als de slaapstand actief is.
Basishandelingen
Basishandelingen Bestemmingen opslaan 2U6C-03H 1660-03J U kunt fax-/scanbestemmingen in het Adresboek die u veel gebruikt, registreren en ze gemakkelijk selecteren wanneer u ze nodig hebt ( Bestemmingen opslaan in het adresboek(P. 181) ). U kunt naar bestemmingen zoeken op alfabet, uit lijsten in het Adresboek of door driecijferige nummers in te voeren (nummers voor verkort kiezen). U kunt ook bestemmingen sneller opgeven door middel van de volgende functies.
Basishandelingen < > Toont bestemmingen voor I-Faxen. < > Geeft bestemmingen weer voor gedeelde mappen en FTP-servers. Registratie van bestemmingen wordt gerealiseerd vanaf de computer. Een gedeelde map instellen als een opslaglocatie(P. 96) Bestemmingen vanaf een externe UI registreren(P. 436) < > Druk hierop om bestemmingen weer te geven die zijn opgeslagen met de functie Groepskiezen. ● Gebruik de computer om een gedeelde map of FTP-server te registreren als de bestemming voor scans.
Basishandelingen Bestemmingen opslaan in het adresboek 2U6C-03J Dit gedeelte beschrijft hoe u bestemmingen vanaf het bedieningspaneel registreert. U kunt ook de externe UI gebruiken om bestemmingen te registreren. Bestemmingen vanaf een externe UI registreren(P. 436) 1 Selecteer in het scherm Start. 2 Selecteer Het scherm Start(P. 122) ● Als u wordt gevraagd een pincode in te voeren, voert u de pincode voor het adresboek in en selecteert u .
Basishandelingen 6 Selecteer condities om het zoekresultaat weer te geven. Er worden alleen gebruikers gevonden en weergegeven die voldoen aan alle zoekcriteria uit stappen 3 en 4. Als gebruikers worden gevonden die voldoen aan minstens één van de opgegeven zoekcriteria die in stappen 3 en 4 zijn opgegeven, geef dan al deze gebruikers weer. 7 Selecteer .
Basishandelingen Als er tijdens verzending van een afbeelding een fout optreedt, wordt de fout gecontroleerd en gecorrigeerd om te voorkomen dat een onjuiste afbeelding wordt verzonden bij de instelling . Als het even duurt voordat een verzending begint, bijvoorbeeld vanwege een slechte telefoonverbinding, kunt u de transmissiestartsnelheid verlagen.
Basishandelingen Meerdere bestemmingen als een groep opslaan 2U6C-03K U kunt meerdere bestemmingen selecteren die al zijn opgeslagen en deze registreren als een groep. Dit gedeelte beschrijft hoe u een groep vanaf het bedieningspaneel registreert. U kunt een groep ook registreren met behulp van de externe UI. Bestemmingen vanaf een externe UI registreren(P. 436) ● Uitsluitend bestemmingen van hetzelfde type adres kunnen worden geregistreerd in dezelfde groep.
Basishandelingen 9 Herhaal stap 6 tot en met 8 totdat u alle gewenste bestemmingen hebt opgeslagen en selecteer vervolgens . Toont informatie over de opdracht ● Selecteer de bestemming, en selecteer . Een bestemming uit de groep verwijderen ● Selecteer de bestemming die u uit de groep wilt verwijderen, en selecteer 10 Selecteer . 11 Selecteer of . .
Basishandelingen De geregistreerde bestemmingen in het adresboek bewerken 2U6C-03L U kunt uw instellingen veranderen, bijvoorbeeld een geregistreerd faxnummer of -naam, het type geregistreerde bestemming veranderen van faxnummer naar e-mail, een kiescode veranderen, en groepsbestemmingen toevoegen of verwijderen. U kunt ook bestemmingen of groepen verwijderen. ● Wanneer u een bestemming uit het adresboek verwijdert, verwijder hem ook uit de favoriete instellingen. Veelgebruikte instellingen opslaan(P.
Basishandelingen Een USB-geheugenapparaat gebruiken 2U6C-03R Als u een USB-geheugen gebruikt, moet u het in de USB-poort van het apparaat steken. Voordat u een USB-geheugen gebruikt ● De ondersteunde formaten van USB-geheugenapparaat zijn FAT16 en FAT32. De volgende apparaten en gebruiken worden niet ondersteund.
Basishandelingen KOPPELINGEN Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia)(P. 270) Data opslaan op een USB-geheugentoestel(P.
Kopiëren Kopiëren Kopiëren .............................................................................................................................................................. 190 Scherm voor Basisbewerkingen voor kopiëren ............................................................................................... 192 Basisbewerkingen voor kopiëren ..................................................................................................................... 194 Kopiëren annuleren ......
Kopiëren Kopiëren 2U6C-03S 1660-03S Dit hoofdstuk beschrijft basisbewerkingen voor kopiëren, en verschillende handige kopieerfuncties. ◼ Basishandelingen gebruiken Scherm voor Basisbewerkingen voor kopiëren(P. 192) Basisbewerkingen voor kopiëren(P. 194) Kopiëren annuleren(P. 199) Kopieerstatus en logboeken controleren(P. 200) ◼ Kwaliteit verhogen Kopieerkwaliteit verbeteren en aanpassen(P. 202) Selecteer het type origineel om te kopiëren(P. 203) Scherpte voor het kopiëren aanpassen (scherpte)(P.
Kopiëren Paspoortkopieën maken(P.
Kopiëren Scherm voor Basisbewerkingen voor kopiëren 2U6C-03U Als u in het scherm Start selecteert, verschijnt het scherm voor Basisbewerkingen voor kopiëren. Huidige instelstatus en instelknoppen De instelstatus, zoals kopieerverhouding, kopieerpapier, en aantal kopieën, worden weergegeven. Om correct te kopiëren, moet u beslist de hier weergegeven instellingen controleren. Als u een instelling wilt veranderen, selecteert u het gewenste instelitem. Basisbewerkingen voor kopiëren(P.
Kopiëren U kunt de standaard instellingen gezamenlijk herstellen. Start kopiëren met deze knop.
Kopiëren Basisbewerkingen voor kopiëren 2U6C-03W Dit gedeelte beschrijft de basishandelingen-procedure om een origineel te kopiëren. 1 Plaats het origineel / de originelen. 2 Selecteer in het scherm Start. 3 4 Originelen plaatsen(P. 135) Het scherm Start(P. 122) Selecteer in het scherm voor basisbewerkingen voor kopiëren. Scherm voor Basisbewerkingen voor kopiëren(P. 192) Voer het aantal afdrukken in, en selecteer .
Kopiëren ◼ De achtergronddichtheid aanpassen achtergronddichtheid aanpassen De ● Afhankelijk van de kleur van het origineel, worden andere delen dan de achtergrond misschien niet correct weergegeven. ● Wanneer u instelt op , vindt een automatische aanpassing plaats zodat de achtergrondkleur wit wordt.
Kopiëren Geef de richting, openingtype, en afwerktype van het origineel op. Vergroten of verkleinen U kunt kopieën vergroten of verkleinen door een vooraf ingesteld zoompercentage te gebruiken zoals A4> of door in stappen van 1% een aangepast zoompercentage in te stellen. ● Als u een instelling realiseert voor nadat u het zoompercentage hebt ingesteld, heeft de instelling van het verkleiningspercentage in voorrang.
Kopiëren Kopieerpapier selecteren Geef aan welke papierbron het papier bevat dat u wilt gebruiken voor het afdrukken van kopieën. ● U moet eerst het formaat en type papier opgeven dat in de papierbron is geladen. Het type en formaat papier opgeven(P. 157) Papier laden(P. 139) Selecteer de papierbron Gebruik voor de kopieën het papier dat in de multifunctionele lade is geplaatst. Gebruik voor de kopieën het papier dat in de papierlade (lade 1) van het apparaat is geplaatst.
Kopiëren ● U kunt ook en afzonderlijk voor ieder origineel opgeven. ● Herhaal deze stap totdat het volledige origineel is gescand. 2 Selecteer . ● Wanneer het bericht of wordt weergegeven op het display. bericht(P.
Kopiëren Kopiëren annuleren 2U6C-03X Als u de kopieerbewerking wilt annuleren direct nadat u Start hebt geselecteerd, selecteert u op het op het bedieningspaneel. U kunt het kopiëren ook annuleren nadat u de kopieerstatus hebt scherm of drukt u op gecontroleerd.
Kopiëren Kopieerstatus en logboeken controleren 2U6C-03Y U kunt de actuele kopieerstatus en de logboeken voor gekopieerde documenten controleren. ● Als is ingesteld op , kunt u de kopieer-logboeken niet inzien. opdrachtlog>(P. 562)
Kopiëren ➠ Geeft de gedetailleerde informatie over het document weer. Als er een driecijferig nummer wordt weergegeven bij ● Deze code vertegenwoordigt een foutcode. KOPPELINGEN Basisbewerkingen voor kopiëren(P. 194) Kopiëren annuleren(P. 199) 201 Maatregelen bij iedere foutcode(P.
Kopiëren Kopieerkwaliteit verbeteren en aanpassen 2U6C-040 U kunt de kopieerkwaliteit verbeteren door gedetailleerdere instellingen op te geven, zoals de optimale beeldkwaliteit selecteren, onnodige schaduwen verwijderen, enzovoort. Selecteer het type origineel om te kopiëren(P. 203) Scherpte voor het kopiëren aanpassen (scherpte)(P. 204) 202 Donkere randen wissen bij het kopiëren (kader wissen)(P.
Kopiëren Selecteer het type origineel om te kopiëren 2U6C-041 U kunt de optische beeldkwaliteit voor de kopie selecteren op basis van het type origineel, zoals documenten met alleen tekst, documenten met grafieken en tabellen of documenten met tijdschriftfoto's. Selecteer het type origineel Selecteer deze optie als u documenten gaat kopiëren die tekst en foto's bevatten.
Kopiëren Scherpte voor het kopiëren aanpassen (scherpte) 2U6C-042 U kunt de scherpte van de gekopieerde afbeelding aanpassen. Stel de scherpte hoger in om onscherpe teksten en lijnen te verscherpen of stel deze lager in om de weergave van tijdschriftfoto's te verbeteren.
Kopiëren Donkere randen wissen bij het kopiëren (kader wissen) 2U6C-043 Als u originelen kopieert die kleiner zijn dan het uitvoerpapierformaat, verschijnen er mogelijk kaderlijnen rond de randen in de gekopieerde afbeelding. Als u tegenover elkaar liggende pagina's van een dik boek kopieert, verschijnen er mogelijk donkere randen. stelt u in staat om deze kaderlijnen en donkere randen te wissen.
Kopiëren Handige kopieerfuncties gebruiken 2U6C-045 Dit gedeelte beschrijft handige kopieerfuncties om papier te besparen, en de kopieerhandeling efficiënter te maken. Meerdere documenten op één vel kopiëren (N op 1)(P. 207) Kopieën sorteren per pagina(P. 208) Paspoortkopieën maken(P. 210) 206 Een ID-kaart kopiëren(P.
Kopiëren Meerdere documenten op één vel kopiëren (N op 1) 2U6C-046 U kunt het formaat van een origineel met meerdere pagina´s reduceren, en alle pagina´s op één zijde van het papier rangschikken. U kunt het aantal vellen opslaan als het document kan worden gekopieerd op minder pagina´s dan die van het origineel. ● Als u gebruikt, wordt de kopieerverhouding automatisch verkleind (de kopieerverhouding wordt weergegeven op het scherm).
Kopiëren Kopieën sorteren per pagina 2U6C-047 Als u meerdere kopieën wilt gaan maken van originelen met meerdere pagina's, stel dan in op om de kopieën op paginavolgorde te sorteren. Deze functie is handig bij het voorbereiden van hand-outs voor vergaderingen of presentaties. De kopieën worden per pagina gegroepeerd en worden niet gesorteerd.
Kopiëren Een ID-kaart kopiëren 2U6C-048 1660-048 Gebruik om de voor- en achterzijde van een identiteitsbewijs op dezelfde zijde van een pagina te kopiëren. Deze functie is handig als u bijvoorbeeld een rijbewijs of paspoort gaat kopiëren. ● wordt automatisch ingesteld op <100% 1:1>. Plaats de kaart op de glasplaat origi- neel scannen> KOPPELINGEN Basisbewerkingen voor kopiëren(P.
Kopiëren Paspoortkopieën maken 2U6C-049 U kunt meerdere paspoorten op één vel kopiëren. 1 Plaats het paspoort met de gewenste pagina's open op de glasplaat. Originelen plaatsen(P. 135) 2 Selecteer in het startscherm. 3 Selecteer de Lay-out. Het scherm Start(P. 122) <2 op 1 (2-zijdig)> Kopieert vier tegenoverliggende pagina’s van paspoorten in zijn geheel op één papierzijde. Kopieert acht tegenoverliggende pagina’s van paspoorten in zijn geheel op beide papierzijden.
Kopiëren 6 Selecteer . ➠ Het eerste paspoort wordt gescand. 7 Leg het volgende paspoort op de glasplaat, en selecteer . ● U kunt ook en afzonderlijk voor ieder paspoort opgeven. ● Herhaal deze stap totdat alle paspoorten zijn gescand. 8 Selecteer . KOPPELINGEN Basisbewerkingen voor kopiëren(P.
Faxen Faxen Faxen ..................................................................................................................................................................... 213 Scherm voor basisfuncties voor faxen ............................................................................................................. 216 Basishandelingen voor het verzenden van faxen ...........................................................................................
Faxen Faxen 2U6C-04A 1660-049 In dit hoofdstuk worden faxinstellingen, basishandelingen voor het faxen en verschillende andere nuttige functies beschreven, zoals Faxen via pc voor het rechtstreeks vanaf een computer verzenden van documenten, Adresboek voor het gemakkelijk opgeven van bestemmingen en Doorsturen zodat u faxen kunt ontvangen, ook wanneer u niet op kantoor bent. ● U moet enkele procedures doorlopen voordat u de faxfuncties kunt gebruiken. configureren voor faxfuncties(P.
Faxen ◼ Faxen ontvangen op de ontvangstmethoden(P. 237) manier zoals u dat wilt Ontvangen documenten in het apparaat opslaan (ontvangst in geheugen)(P. 238) ◼ Alle ontvangen documenten doorsturen De ontvangen documenten automatisch doorsturen(P. 240) ◼ Faxen rechtstreeks vanaf uw computer versturen Faxen versturen vanaf uw computer(P.
Faxen ◼ Faxen verzenden en ontvangen via internet Internet Fax (I-Fax) gebruiken(P.
Faxen Scherm voor basisfuncties voor faxen 2U6C-04C Als u in het scherm Start selecteert, verschijnt het scherm voor basisfuncties voor faxen, als u faxen verzendt. Tabblad Selecteer dit tabblad om direct een bestemming in te voeren. Tabblad Selecteer dit tabblad om naar een LDAP-server te zoeken, een kiescode in te voeren, of een bestemming op te geven met behulp van de herhaal-instellingen. Basishandelingen voor het verzenden van faxen(P.
Faxen Basishandelingen voor het verzenden van faxen 2U6C-04E Dit gedeelte beschrijft de basishandelingen-procedure om een origineel te faxen. ● U moet enkele procedures doorlopen voordat u de faxfuncties kunt gebruiken. configureren voor faxfuncties(P. 79) 1 Plaats het origineel / de originelen. 2 Selecteer in het scherm Start. Begininstellingen Originelen plaatsen(P. 135) Het scherm Start(P.
Faxen 2 Selecteer een index. 3 Schakel het selectievakje voor de gewenste bestemming in, en selecteer Index(P. 179) . ● Als een bestemming is geselecteerd uit het in het scherm Start, kan het scherm voor basisfuncties voor faxen verschijnen terwijl de geselecteerde bestemming blijft gespecificeerd. Opgeven uit kiescodenummers Getallen van drie cijfers (codes voor verkort kiezen) worden aan adressen in het Adresboek toegewezen.
Faxen ● Wanneer is ingesteld op , wordt een scherm weergegeven dat de bestemming en de naam voor het nummer toont. (Voor Groepskiezen worden de naam van de bestemming en het aantal bestemmingen getoond.) Bekijk de inhoud en selecteer, als alles juist is, . U kunt een andere bestemming opgeven door te selecteren, en vervolgens de driecijferige code voor verkort kiezen opnieuw op te geven. Bestemmingen in het adresboek weergeven(P.
Faxen 2 Selecteer de LDAP-server die u gebruikt. 3 Selecteer condities waaraan de gezochte gebruikersinformatie moet voldoen. ● Naam, faxnummers, e-mailadressen, namen van bedrijven, en bedrijfsunits zijn de criteria die beschikbaar zijn voor het zoeken naar bestemmingen. 4 Voer de te zoeken tekenreeks in en selecteer . ● Voor het invoeren van tekst raadpleegt u Tekst invoeren(P. 131) . ● Als u meerdere zoekcriteria wilt opgeven, herhaalt u stappen 3 en 4. 5 Selecteer .
Faxen Een bestemming toevoegen ● Als u een fax naar verschillende bestemmingen tegelijk wilt verzenden (groepsverzending), herhaalt u de betreffende stappen om alle bestemmingen in te voeren. ● U kunt ook eerder gebruikte bestemmingen opnieuw oproepen. oproepen (herhaal-instellingen)(P. 231) Eerder gebruikte zendinstellingen Bestemmingen verwijderen Als u meerdere bestemmingen hebt opgegeven, kunt u indien nodig bestemmingen verwijderen. 1 Selecteer .
Faxen ◼ Dichtheid aanpassen Selecteer op het tabblad Stel de dichtheid in ◼ Scherpte aanpassen Selecteer op het tabblad Stel de scherpte in Voorbeeld: Als u met potlood geschreven tekst en lijnen scherper wilt maken Voorbeeld: Als u de weergave van foto's uit een tijdschrift wilt verbeteren 222
Faxen Dubbelzijdige originelen scannen Het apparaat kan automatisch de voor- en achterzijde scannen van originelen in de invoer. ● Het apparaat kan de beide zijden van originelen namelijk niet automatisch scannen wanneer u de originelen op de glasplaat legt of wanneer Handmatig verzenden is ingeschakeld.
Faxen 2 Leg het volgende origineel op de glasplaat, en selecteer . ● Herhaal deze stap totdat alle pagina's zijn gescand. 3 Selecteer . ➠ De faxen worden verzonden. ● Als u faxen altijd met dezelfde instellingen wilt verzenden: wijzigen(P. 173) De standaard instellingen voor functies ● Als u een combinatie van instellingen wilt opslaan voor eenvoudig gebruik: opslaan(P.
Faxen Het verzenden van faxen annuleren 2U6C-04F Als u het verzenden van faxberichten wilt annuleren, onmiddellijk nadat u op hebt gedrukt, selecteert u op het bedieningspaneel. U kunt het verzenden van faxberichten ook op de display of drukt u op annuleren na het controleren van de faxstatus.
Faxen Faxen ontvangen 2U6C-04H In dit gedeelte worden de methoden beschreven voor het ontvangen van faxen. Er wordt ook uitgelegd hoe u de machine configureert voor het ontvangen van faxen. U moet enkele procedures uitvoeren met betrekking tot de faxfuncties voordat u de ontvangstinstellingen gaat opgeven. Begininstellingen configureren voor faxfuncties(P. 79) ● Het apparaat kan ontvangen faxdocumenten afdrukken op papier van het formaat A4 of Letter.
Faxen ● U moet vooraf een telefoon of de optionele handset aansluiten op het apparaat. ● U kunt instellen dat faxen automatisch moeten worden ontvangen als een (P. 547) Wanneer de oproep een fax is De fax wordt automatisch ontvangen nadat u een signaal voor een binnenkomende oproep hebt gehoord.
Faxen 2 Selecteer op het tabblad van het scherm voor 3 Selecteer de ontvangstmethode. basisfuncties voor faxen. Scherm voor basisfuncties voor faxen(P. 216) Als u kiest Geef desgewenst de drie volgende instellingen op. Selecteer als u klaar bent. Hier kunt u de periode opgeven waarin de machine bepaalt of een binnenkomende oproep een fax is of een telefoongesprek.
Faxen 2 Als u een pieptoon hoort, voert u met de toetsen van de telefoon de code voor ontvangst op afstand in. ● Raadpleeg 3 (P. 547) voor meer informatie over het instellen van het ID-nummer. Leg de handset op de haak. KOPPELINGEN Status en logboek voor verzonden en ontvangen documenten controleren(P. 242) Verschillende ontvangstmethoden(P.
Faxen Handige functies gebruiken bij het verzenden 2U6C-04J Dit gedeelte beschrijft hoe u een fax moet doorsturen naar een vooraf opgegeven bestemming, hoe u een fax moet verzenden na een telefoongesprek, en hoe u een kopie van een faxdocument moet opslaan. Eerder gebruikte zendinstellingen oproepen (herhaal-instellingen)(P. 231) Eerst een gesprek tot stand brengen en dan een fax versturen (handmatig verzenden)(P. 234) 230 Een kopie van een verzonden origineel bewaren(P.
Faxen Eerder gebruikte zendinstellingen oproepen (herhaalinstellingen) 2U6C-04K U kunt bestemmingen oproepen die u eerder hebt opgegeven. Als u een eerder gebruikte bestemming opgeeft, worden ook de laatst gebruikte faxinstellingen, zoals de dichtheid, voor die bestemming geselecteerd. ● Als is ingesteld op , kunt u deze functie niet gebruiken. Eerder gebruikte bestemmingen blokkeren(P.
Faxen ➠ De geselecteerde bestemming en de faxinstellingen die toen is gebruikt, worden opgeven. U kunt ook de instellingen wijzigen voordat u verzendt. Bestemmingen verwijderen Als u naar meerdere bestemmingen hebt overgedragen, kunt u indien nodig bestemmingen verwijderen. 1 Selecteer . 2 Schakel het selectievakje voor de te verwijderen bestemming in, en selecteer .
Faxen 3 Selecteer . ➠ De faxen worden verzonden. KOPPELINGEN Basishandelingen voor het verzenden van faxen(P.
Faxen Eerst een gesprek tot stand brengen en dan een fax versturen (handmatig verzenden) 2U6C-04L U kunt faxen handmatig versturen aan het einde van een telefoongesprek. Wanneer u een pieptoon hoort over de telefoon, betekent dit dat de ontvanger probeert uw fax te ontvangen. Selecteer om de fax te verzenden. ● U moet vooraf een telefoon of de optionele handset aansluiten op het apparaat. 1 Plaats het origineel / de originelen. Originelen plaatsen(P.
Faxen ● Als u wilt annuleren, annuleren(P. 225) 8 selecteer dan . Het Leg de handset op de haak. KOPPELINGEN Basishandelingen voor het verzenden van faxen(P. 217) Het verzenden van faxen annuleren(P. 225) Status en logboek voor verzonden en ontvangen documenten controleren(P.
Faxen Een kopie van een verzonden origineel bewaren 2U6C-04R U kunt een fax verzenden naar een opgegeven adres, maar u kunt gefaxte documenten ook verzenden naar een vooraf ingesteld adres voor opslag. Zo kunt u gemakkelijk een logboek bijhouden van wat u hebt verstuurd. U kunt als adres voor opslag een faxnummer opgeven, een e-mailadres, een gedeelde map op de computer, een FTP-server of een I-Fax. ● Alleen bestemmingen in het adresboek kunnen worden opgegeven als opslagadres.
Faxen Verschillende ontvangstmethoden 2U6C-04S U kunt ontvangen faxen opslaan in het geheugen van het apparaat, zonder ze af te drukken. U kunt het papierafval beperken door de gedetailleerde informatie van faxdocumenten te controleren en uitsluitend nodige documenten af te drukken. Ontvangen documenten in het apparaat opslaan (ontvangst in geheugen)(P.
Faxen Ontvangen documenten in het apparaat opslaan (ontvangst in geheugen) 2U6C-04U U kunt ontvangen faxberichten in het geheugen van het apparaat opslaan en ze later afdrukken. Met deze functie kan worden voorkomen dat onbevoegde personen onbedoeld vertrouwelijke documenten kunnen inzien. Documenten opslaan in het geheugen(P. 238) Documenten afdrukken die in het geheugen zijn opgeslagen(P. 239) Documenten in het geheugen controleren / doorsturen / verwijderen(P.
Faxen ● U kunt en niet op hetzelfde tijdstip opgeven. Documenten afdrukken die in het geheugen zijn opgeslagen Om ontvangen documenten in het geheugen af te drukken, stelt u in op . Alle documenten in het geheugen worden afgedrukt. ● U kunt niet alleen een bepaald document in het geheugen afdrukken.
Faxen De ontvangen documenten automatisch doorsturen 2U6C-04W U kunt instellen dat alle ontvangen documenten worden doorgestuurd naar bepaalde bestemmingen. U kunt zo altijd en overal faxen ontvangen, ook als u niet op kantoor bent. Instellingen opgeven voor documenten die automatisch moeten worden doorgestuurd(P. 240) Doorgestuurde documenten afdrukken(P. 240) Documenten afdrukken, opnieuw verzenden of verwijderen waarvan het doorsturen is mislukt(P.
Faxen ◼ Documenten in het geheugen afdrukken, opnieuw verzenden of verwijderen 1 Selecteer . 2 Selecteer . 3 Selecteer het document dat u wilt afdrukken / opnieuw te verzenden / verwijderen. ➠ Geeft de gedetailleerde informatie over het document weer. ● Om het document af te drukken, selecteert u .
Faxen Status en logboek voor verzonden en ontvangen documenten controleren 2U6C-04X De statuswaarden en communicatielogboeken voor verzonden en ontvangen faxdocumenten kunt u afzonderlijk controleren voor verzonden en ontvangen faxen. ● Wanneer is ingesteld op , kunt u de communicatielogboeken niet inzien. (P. 562) 1 Selecteer . 2 Selecteer of .
Faxen ➠ Geeft de gedetailleerde informatie over het document weer. Als er een driecijferig nummer wordt weergegeven bij ● Deze code vertegenwoordigt een foutcode. KOPPELINGEN Basishandelingen voor het verzenden van faxen(P. 217) Het verzenden van faxen annuleren(P. 225) Faxen ontvangen(P. 226) I-Faxen verzenden(P. 248) I-Faxen ontvangen(P. 255) Rapporten en lijsten afdrukken(P. 596) 243 Maatregelen bij iedere foutcode(P.
Faxen Faxen versturen vanaf uw computer 2U6C-04Y U kunt faxdocumenten die u met uw computertoepassing hebt gemaakt, rechtstreeks vanaf de computer faxen. U hoeft de documenten dan niet eerst af te drukken en u kunt zo toner en papier besparen. U moet de basisfaxinstellingen opgeven ( Begininstellingen configureren voor faxfuncties(P. 79) ) en het fax-stuurprogramma op de computer installeren.
Faxen Faxen verzenden vanaf een computer 2U6C-050 ● Wanneer op het apparaat is ingesteld op , kunt u geen faxen versturen vanaf een computer. Faxen verzenden vanaf een computer beperken(P. 414) ● U moet Beheer afdelings-id inschakelen in het faxstuurprogramma dat u gebruikt als deze functie is ingeschakeld op de machine. Klik voor meer informatie op [Help] in het scherm van het faxstuurprogramma. Afdeling-ID beheer configureren(P.
Faxen 4 Herhaal de stappen 2 en 3 als u bestemmingen erbij wilt opgeven. ● U kunt een bestemming toevoegen door in stap 3 op [Volgende bestemming toevoegen] te klikken. ● Als u een nummer moet opgeven om een buitenlijn te kiezen, selecteert u [Gedetailleerde instellingen] [Add Outside Dialing Prefix to G3/G4/IP Fax Number] en typt u het nummer bij [Prefix voor buitenlijn]. Het opgegeven nummer wordt tijdens het kiezen toegevoegd aan het begin van het faxnummer.
Faxen Internet Fax (I-Fax) gebruiken 2U6C-051 De functie Internet Fax (I-Fax) biedt u de mogelijkheid faxen te verzenden en te ontvangen via internet. De oorspronkelijke te faxen documenten worden als TIFF- beeldbestanden aan e-mailberichten gehecht. Omdat er geen telefoonverbinding wordt gebruikt, kunt u faxberichten versturen naar verre bestemmingen en documenten van vele pagina's versturen zonder dat u zich zorgen hoeft te maken over de kosten van de communicatie.
Faxen I-Faxen verzenden 2U6C-052 Als u een fax wilt versturen naar een computer of een ander toestel dat geschikt is voor I-Fax, geeft u niet een faxnummer op als de bestemming, maar een e-mailadres. Verstuurt u een I-Fax naar een computer, dan wordt deze verstuurd als een e-mail-attachment in TIFF-formaat. En op dezelfde wijze als u een e-mailbericht verstuurt naar een computer, kunt u meerdere bestemmingen en ook Cc- en Bcc-bestemmingen opgeven. 1 Plaats het origineel / de originelen.
Faxen 4 Schakel het selectievakje voor de gewenste bestemming in, en selecteer . ● Als een bestemming is geselecteerd uit het in het scherm Start, kan het scherm voor basisfuncties voor het verzenden van I-faxen verschijnen terwijl de geselecteerde bestemming blijft gespecificeerd. Opgeven uit kiescodenummers Getallen van drie cijfers (codes voor verkort kiezen) worden aan adressen in het Adresboek toegewezen.
Faxen Als er bevestigingsscherm verschijnt ● Wanneer is ingesteld op , wordt een scherm weergegeven dat de bestemming en de naam voor het nummer toont. (Voor Groepskiezen worden de naam van de bestemming en het aantal bestemmingen getoond.) Bekijk de inhoud en selecteer, als alles juist is, . U kunt een andere bestemming opgeven door te selecteren, en vervolgens de driecijferige code voor verkort kiezen opnieuw op te geven.
Faxen 4 Voer de te zoeken tekenreeks in en selecteer . ● Voor het invoeren van tekst raadpleegt u Tekst invoeren(P. 131) . ● Als u meerdere zoekcriteria wilt opgeven, herhaalt u stappen 3 en 4. 5 Selecteer . 6 Selecteer condities om het zoekresultaat weer te geven. Er worden alleen gebruikers gevonden en weergegeven die voldoen aan alle zoekcriteria uit stappen 3 en 4.
Faxen ● Als u of hebt opgegeven, wordt de bestemming opgegeven in het veld . ● en -adressen kunnen alleen worden geselecteerd met of . Bestemmingen verwijderen Als u meerdere bestemmingen hebt opgegeven, kunt u indien nodig bestemmingen verwijderen. 1 Selecteer . 2 Schakel het selectievakje voor de te verwijderen bestemming in, en selecteer .
Faxen Het antwoordadres opgeven Als u de ontvanger een antwoordadres wilt weergeven dat verschilt van het adres van het apparaat, moet u het hier opgeven. Selecteer het beoogde antwoordadres uit de in het adresboek geregistreerde Bestemmingen bestemmingen. Als er geen bestemming is opgeslagen in het adresboek, raadpleegt u opslaan(P. 179) . 1 Selecteer op het tabblad . 2 Selecteer .
Faxen ● Als de postbus is leeggemaakt, wordt alle e-mail in de serverpostbus verwijderd. Als u het e-mailaccount opgeeft dat u gewoonlijk gebruikt, moet u eerst controleren of er eventueel nog e-mail in de postbus zit die bewaard moet blijven. 1 Start de externe UI en meld u in de systeembeheerdersmodus aan. 2 Klik op [Instellingen/registratie] op de portaalpagina. 3 Selecteer [TX-instellingen] 4 Klik op [Wissen] in [Postbus wissen]. 5 Lees de melding die wordt weergegeven en klik op [OK].
Faxen I-Faxen ontvangen 2U6C-053 ◼ Wanneer een I-Fax binnenkomt Wanneer een I-Fax binnenkomt, knippert het Data-lampje op het bedieningspaneel. Wanneer een I-Fax volledig is ontvangen, wordt het document automatisch afgedrukt en gaat het lampje uit. ● Om de ontvangst te annuleren, selecteert u op het tabblad .
Afdrukken Afdrukken Afdrukken .......................................................................................................................................................... 257 Afdrukken vanaf een computer ....................................................................................................................... 258 Afdrukken annuleren ....................................................................................................................................
Afdrukken Afdrukken 2U6C-054 Er zijn tal van manieren om het apparaat als printer te gebruiken. U kunt documenten op uw computer afdrukken met behulp van het printerstuurprogramma, of afbeeldingsbestanden afdrukken vanaf een USB-geheugenapparaat. Maak afhankelijk van uw wensen volledig gebruik van de afdrukfuncties. ◼ Afdrukken vanaf een computer Een document dat u op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma. Afdrukken vanaf een computer(P.
Afdrukken Afdrukken vanaf een computer 2U6C-055 Documenten die u met een programma op uw computer hebt gemaakt, kunt u afdrukken via het printerstuurprogramma. Het printerstuurprogramma heeft een aantal handige instellingen, zoals vergroten / verkleinen en dubbelzijdig afdrukken, waarmee u uw documenten op verschillende manieren kunt afdrukken. U kunt de afdrukfunctie van de machine pas gebruiken nadat u enkele procedures hebt doorlopen, zoals het installeren van het printerstuurprogramma op uw computer.
Afdrukken ● Normaal gesproken moet u, voordat u gaat afdrukken, het formaat en het type papier opgeven dat is geladen in iedere papierbron. ● Als u instelt op , kunt u afdrukken vanuit de papierbron die is gedefinieerd in het printerstuurprogramma, ongeacht de papierinstellingen op het apparaat. (P. 505) 1 2 3 Open een document in een programma en geef het dialoogvenster Afdrukken weer.
Afdrukken Afdrukken annuleren 2U6C-056 U kunt het afdrukken annuleren vanaf uw computer of vanaf het bedieningspaneel van de machine. Vanaf een computer(P. 260) Vanaf het bedieningspaneel(P. 261) Vanaf een computer U annuleert het afdrukken vanaf het pictogram van de printer dat wordt weergegeven in het systeemvak van het bureaublad. 1 Dubbelklik op het printerpictogram. Wanneer het printerpictogram niet wordt weergegeven ● Open de printermap ( De printermap weergeven(P.
Afdrukken Annuleren vanuit een programma ● In sommige programma's verschijnt het onderstaande scherm. U kunt het afdrukken annuleren door op [Annuleren] te klikken. Vanaf het bedieningspaneel Annuleer het afdrukken met ◼ Druk op of . om te annuleren Als op het scherm een lijst met documenten verschijnt wanneer u op Selecteer het document dat u wilt annuleren, en selecteer hebt gedrukt .
Afdrukken Basisbewerkingen met de printer(P. 258) Afdrukstatus en logboeken controleren(P.
Afdrukken Afdrukstatus en logboeken controleren 2U6C-057 U kunt de actuele afdrukstatus en de logboeken voor afgedrukte documenten controleren. ● Wanneer is ingesteld op , kunt u de afdruklogboeken niet inzien. (P. 562) Handig in de volgende situaties ● Als het erg lang duurt voordat uw documenten worden afgedrukt, kunt u de wachtrij bekijken met de documenten die nog niet zijn afgedrukt.
Afdrukken ➠ Geeft de gedetailleerde informatie over het document weer. ● De weergegeven documentnaam of gebruikersnaam komt mogelijk niet overeen met de werkelijke document- of gebruikersnaam. Als er een driecijferig nummer wordt weergegeven bij ● Deze code vertegenwoordigt een foutcode. KOPPELINGEN Basisbewerkingen met de printer(P. 258) Afdrukken annuleren(P. 260) 264 Maatregelen bij iedere foutcode(P.
Afdrukken Verschillende afdrukmethoden 2U6C-058 Dit gedeelte beschrijft hoe u een document afdrukt door een pincode toe te voegen, en hoe u een bestand afdrukt dat is opgeslagen op een USB-geheugenapparaat, zonder gebruik te maken van een printerstuurprogramma. Een met pincode beveiligd document afdrukken (Beveiligde afdruk)(P. 266) Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia)(P.
Afdrukken Een met pincode beveiligd document afdrukken (Beveiligde afdruk) 2U6C-059 Als u gaat afdrukken vanaf een computer, kunt u een pincode instellen voor een document. Het document blijft dan in het geheugen van de machine staan en wordt pas afgedrukt nadat op het bedieningspaneel van de machine de juiste pincode is ingevoerd. Deze functie wordt Beveiligd afdrukken genoemd en het document dat u beveiligt met een pincode wordt een beveiligd document genoemd.
Afdrukken Documenten beveiligd afdrukken 2U6C-05A In dit gedeelte wordt uitgelegd hoe u een document vanuit een programma kunt afdrukken als een beveiligd document. Er wordt eerst beschreven hoe u een beveiligd document naar de machine stuurt en daarna kunt u lezen hoe u het beveiligde document kunt afdrukken. Een beveiligd document van een computer naar de machine sturen(P. 267) Beveiligde documenten afdrukken(P. 268) De periode instellen waarna beveiligde documenten worden verwijderd(P.
Afdrukken Beveiligde documenten afdrukken Drukt beveiligde documenten af die naar het apparaat zijn verzonden. Als een geldige periode ( De periode instellen waarna beveiligde documenten worden verwijderd(P. 269) ) is verstreken, wordt het beveiligde document verwijderd uit het geheugen van het apparaat en kunt u het niet meer afdrukken. ● Als beveiligde documenten niet worden afgedrukt, nemen ze geheugenruimte in beslag en bestaat de kans dat gewone (onbeveiligde) documenten niet kunnen worden afgedrukt.
Afdrukken De periode instellen waarna beveiligde documenten worden verwijderd U kunt de geldige periode wijzigen vanaf het moment dat beveiligde documentgegevens naar het apparaat zijn verzonden tot het moment dat ze zijn verwijderd. 1 Selecteer
in het scherm Start. 2 Selecteer . 3 Selecteer . Het scherm Start(P. 122) ● Als het aanmeldingsscherm verschijnt, voert u de juiste combinatie van ID en pincode in. het apparaat(P.Afdrukken Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia) 2U6C-05C U kunt bestanden rechtstreeks afdrukken door een USB-geheugenapparaat op het apparaat aan te sluiten. Met behulp van deze functie kunt u afdrukken zonder gebruik te maken van een computer. Voor meer informatie over de beschikbare USB-geheugenapparaten en hoe u het USB-geheugenapparaat plaatst / verwijdert, raadpleegt u Een USB-geheugenapparaat gebruiken(P. 187) . ● U moet instellen op .
Afdrukken De methode van bestandsweergave veranderen U kunt de methode van bestandsweergave selecteren bij 'Voorbeeld' / 'Details'. Voorbeeld Details ● U kunt de methode van bestandsweergave opgeven voor het weergeven van het scherm . (P. 554) De sorteervolgorde van bestanden wijzigen U kunt de sorteervolgorde wijzigen van de bestanden op een USB-geheugenapparaat.
Afdrukken Gebruik voor het afdrukken van bestanden het papier dat in de multifunctionele lade is geplaatst. Gebruik voor het afdrukken van bestanden het papier dat in de papierlade (lade 1) van het apparaat is geplaatst. ● Wanneer de optionele paper feeder is geïnstalleerd, wordt zijn papierlade ook weergegeven. ● Als u andere afdrukinstellingen wilt opgeven, selecteert u . ● is niet beschikbaar voor het afdrukken van PDF-bestanden.
Afdrukken Drukt af op één kant van het papier. Hiermee wordt zodanig op beide kanten van het papier afgedrukt dat de afgedrukte pagina ´s horizontaal worden geopend nadat ze zijn ingebonden. Hiermee wordt zodanig op beide kanten van het papier afgedrukt dat de afgedrukte pagina ´s verticaal worden geopend nadat ze zijn ingebonden. ● <2-zijdig afdrukken> is eventueel niet voor alle formaten of soorten papier beschikbaar. papier(P.
Afdrukken ● Voor een PDF-bestand kunt u 9 of 16 pagina's beelddata aan één kant van een vel papier afdrukken, met behulp van onder . U kunt de afdrukinstellingen voor JPEG- en TIFF-afbeeldingen wijzigen. <2-zijdig afdrukken> U kunt dubbelzijdige afdrukken maken. Selecteer de inbindpositie. (Uitsluitend JPEG-bestanden) Drukt data voor meerdere pagina's met beelddata op dezelfde kant van een vel papier.
Afdrukken Kies deze optie om beelden met een fijne gradatie, zoals beelden van een digitale camera, met een vloeiende afwerking af te drukken. Kies deze optie om beelden met kleine tekst of dunne lijnen scherp af te drukken. U kunt instellingen in verband met de afdrukkwaliteit, veranderen. Stel de afdruk-dichtheid in. Als u Selecting selecteert, vindt het afdrukken plaats in de spaarstand.
Afdrukken Drukt alle pagina's af. Geef het paginabereik op dat u wilt afdrukken. Voer in en de betreffende paginanummers in, en selecteer . ● Als het opgegeven paginabereik niet overeenkomt met de pagina´s van het PDF-bestand, wordt er niets afgedrukt. Geef op of de grootte van de afdruk wordt aangepast aan het afdrukbereik van het papier.
Afdrukken U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit. U kunt deze instelling (P. 525) voor de realiseren voor alle afbeeldingtypen binnen een document. Raadpleeg beschrijving van de instelling. Geef op op welke manier kleurendata in zwart/wit moet worden afgedrukt. Zie (P.
Scannen Scannen Scannen ............................................................................................................................................................... 279 Scherm voor basisfuncties voor scannen ........................................................................................................ 281 Basishandelingen voor het scannen van originelen .......................................................................................
Scannen Scannen 2U6C-05E 1660-05E U kunt originele documenten scannen door het bedieningspaneel van het apparaat of een programma op een computer te gebruiken. Welke manier u ook gebruikt, de gescande originelen worden geconverteerd naar elektronische bestandsindelingen zoals PDF-bestanden. Gebruik de scanfunctie om omvangrijke papieren documenten te converteren naar bestanden zodat u deze gemakkelijk kunt ordenen.
Scannen ◼ Efficiënt, betrouwbaar U kunt instructies vinden over hoe u het rendement bij het verzenden van data verbetert, en beschrijvingen van handige instellingen. Handige scanfuncties(P. 308) ◼ Scannen vanaf een computer U kunt originelen die op het apparaat zijn geplaatst, scannen vanaf een computer. De gescande originelen worden opgeslagen op de computer.
Scannen Scherm voor basisfuncties voor scannen 2U6C-05F Als u in het scherm Start selecteert, verschijnt het scherm voor Basisbewerkingen voor scannen. De gescande data opslaan op een computer. Scherm met basisfuncties voor computer-scannen(P. 281) Plaatst het apparaat in de online-status als originelen vanaf een computer worden gescand. de computer (extern scannen)(P. 319) Scannen via De gescande data opslaan op een USB-geheugenapparaat.
Scannen Type scan Selecteer de scan-instelling. Scannen, en op een computer opslaan(P. 285) Start het scannen met deze knop. Scherm met basisfuncties voor USB-scannen Verzendinstellingen Het origineel wordt gescand op basis van de hier opgegeven instellingen. U kunt de standaard instellingen gezamenlijk herstellen. Start het scannen met deze knop. selecteren start scannen in zwart-wit. selecteren start scannen in kleur.
Scannen Tabblad Selecteer dit tabblad om de scaninstellingen op te geven. U kunt de naam en het adres van de opgegeven bestemming controleren of veranderen, maar ook het aantal bestemmingen. U kunt de standaard instellingen gezamenlijk herstellen. Start het scannen met deze knop. selecteren start scannen in zwart-wit. selecteren start scannen in kleur.
Scannen Basishandelingen voor het scannen van originelen 2U6C-05H 1660-05H Dit gedeelte beschrijft de basisprocedures voor het scannen van originelen. ◼ Scannen Scannen, en op een computer opslaan(P. 285) Data opslaan op een USBgeheugentoestel(P. 287) ◼ Taken verwerken Het verzenden van documenten annuleren(P. 300) Status en logboek van gescande originelen controleren(P. 301) 284 Data via e-mail verzenden of data opslaan in een gedeelde map of op een FTP-server(P.
Scannen Scannen, en op een computer opslaan 2U6C-05J De procedure van het scannen van een origineel en het opslaan op een computer kan alleen worden uitgevoerd wanneer vanaf het apparaat wordt gescand. Voer de scan uit terwijl u opgeeft op welke computer de originelen worden opgeslagen, geef op of de originelen in kleur of in zwart-wit worden gescand, of de originelen worden opgeslagen als PDF- of JPEG-bestanden en geef de overige instellingen op.
Scannen Als u in stap 1 originelen in de documentinvoer plaatst Wanneer het scannen is voltooid, wordt de doelmap voor de opslag op de computer weergegeven. Wanneer u in stap 1 originelen op de glasplaat legt Volg, wanneer het scannen is voltooid, onderstaande procedure (behalve als u JPEG als bestandsformaat hebt geselecteerd). 1 Als u extra pagina's van documenten wilt scannen, plaatst u het volgende origineel op de glasplaat en selecteert u .
Scannen Data opslaan op een USB-geheugentoestel 2U6C-05K Dit gedeelte beschrijft hoe u het origineel scant, en de gescande gegevens opslaat op een USB-geheugenapparaat. Voor informatie over de beschikbare USB-geheugenapparaten en hoe u het USB-geheugenapparaat plaatst / verwijdert, raadpleegt u Een USB-geheugenapparaat gebruiken(P. 187) . ● U moet instellen op . (P. 556) 1 Plaats het origineel / de originelen.
Scannen Een bestandsindeling selecteren U kunt selecteren in welk bestandformaat originelen worden gescand. Kies uit PDF/JPEG/TIFF. Met PDF kunt u kiezen uit Compact PDF met een kleinere gegevensomvang, of het PDF-formaat waarmee u tekst kunt zoeken, inclusief tekstgegevens die zijn gescand met OCR (optical character recognition). U kunt ook een PDF-bestand maken met extra veiligheid, door gegevens te coderen of een handtekening toe te voegen. < De beveiliging van elektronische bestanden verbeteren(P.
Scannen De afdrukstand van het origineel opgeven U kunt de afdrukstand instellen op Staand of Liggend. De originele afdrukrichting selecteren Dubbelzijdige originelen scannen Het apparaat kan automatisch de voor- en achterzijde scannen van originelen in de invoer. ● Het apparaat kan de beide zijden van originelen niet automatisch scannen wanneer u de originelen op de glasplaat legt.
Scannen ➠ Het scannen van het origineel start. ● Als u wilt annuleren, selecteer dan annuleren(P. 300) . Het verzenden van documenten Als u in stap 1 originelen in de documentinvoer plaatst Het opslaan start zodra het scannen is voltooid. Wanneer u in stap 1 originelen op de glasplaat legt Volg, wanneer het scannen is voltooid, onderstaande procedure (behalve als u JPEG als bestandsformaat hebt geselecteerd).
Scannen Data via e-mail verzenden of data opslaan in een gedeelde map of op een FTP-server 2U6C-05L Dit gedeelte beschrijft de procedures voor het scannen van originelen, en het rechtstreeks vanaf het apparaat verzenden van de gescande data, door ze aan een e-mailbericht toe te voegen, of ze op te slaan in een gedeelde map of op een FTP-server. ● Voordat u de gegevens rechtstreeks via e-mail kunt verzenden, moet u bepaalde procedures voltooien, bijvoorbeeld de instellingen van de e-mailserver opgeven.
Scannen ● U moet bestemmingen opslaan in het adresboek om deze functie te kunnen gebruiken. Bestemmingen opslaan(P. 179) ● Het adres van de gedeelde map of de FTP-server registreren vanaf een computer. Een gedeelde map instellen als een opslaglocatie(P. 96) Bestemmingen vanaf een externe UI registreren(P. 436) 1 Selecteer op het tabblad . 2 Selecteer . 3 Selecteer een index. 4 Index(P.
Scannen 1 Selecteer op het tabblad . 2 Selecteer . 3 Voer een code van drie cijfers in. ● Als u een onjuiste waarde hebt ingevoerd, wist u deze met behulp van . Als er bevestigingsscherm verschijnt ● Wanneer is ingesteld op , wordt een scherm weergegeven dat de bestemming en de naam voor het nummer toont. (Voor Groepskiezen worden de naam van de bestemming en het aantal bestemmingen getoond.
Scannen ● U moet de instellingen voor verbinding met een LDAP-server vooraf opgeven. registreren(P. 64) LDAP-servers 1 Selecteer op het tabblad . 2 Selecteer de LDAP-server die u gebruikt. 3 Selecteer condities waaraan te zoeken gebruikersinformatie moet voldoen. ● Naam, faxnummers, e-mailadressen, namen van bedrijven, en bedrijfsunits zijn de criteria die beschikbaar zijn voor het zoeken naar bestemmingen.
Scannen ● Als er een verificatiescherm verschijnt wanneer u selecteert, voert u de gebruikersnaam van het apparaat en het bijbehorende wachtwoord in die zijn geregistreerd op de LDAP-server en selecteert u vervolgens . LDAP-servers registreren(P. 64) 8 Schakel het selectievakje in voor de gebruiker die u wilt opgeven als bestemming, en selecteer .
Scannen De afdrukstand van het origineel opgeven Dubbelzijdige originelen scannen Het scanformaat van het origineel opgeven U kunt het scanformaat van het origineel opgeven. Selecteer op het tabblad Selecteer het originele formaat Een bestandsindeling selecteren U kunt selecteren in welk bestandformaat originelen worden gescand. Kies uit PDF/ JPEG/TIFF.
Scannen ◼ Een PDF-bestand op pagina indelen Geef op of u het origineel met meerdere pagina's wilt omzetten in één PDF-bestand, of voor iedere pagina een afzonderlijk PDF-bestand wilt maken. Deze instelling kunt u voor ieder PDF-formaat configureren.
Scannen Selecteer <2-zijdig origineel> op het tabblad Selecteer of Selecteer deze optie voor originelen waarvan de afbeeldingen op de voor- en achterzijde dezelfde afdrukrichting hebben. Selecteer deze optie voor originelen waarvan de afbeeldingen op de voor- en achterzijde niet tegenovergestelde afdrukrichting hebben. ● Raadpleeg Helder scannen(P.
Scannen ● Voer naam en wachtwoord van de gebruiker in en selecteer . Bestandsnaam van het verzonden document ● De eerste naam van een verzonden document wordt automatisch toegewezen op basis van de volgende indeling: 'nummer voor communicatiebeheer (vier cijfers)_datum en tijdstip van verzenden_documentnummer (drie cijfers).bestandsnaamextensie'. Als een verzendfout voor de e-mail optreedt Foutmeldingen worden soms verstuurd naar het e-mailadres dat is ingesteld op het apparaat.
Scannen Het verzenden van documenten annuleren 2U6C-05R Als u het verzenden van documenten wilt annuleren, onmiddellijk nadat u selecteert, selecteert u . U kunt het verzenden van faxberichten ook annuleren na het controleren van de op de display of drukt u op status van de verzending.
Scannen Status en logboek van gescande originelen controleren 2U6C-05S U kunt de actuele status en de logboeken van gescande originelen direct vanaf het apparaat controleren. ● Als is ingesteld op , kunt u de logboeken voor verzonden documenten niet inzien. (P. 562) 1 Selecteer . 2 Selecteer . 3 Controleer de status en logboeken voor verzonden documenten.
Scannen Als er een driecijferig nummer wordt weergegeven bij ● Deze code vertegenwoordigt een foutcode. Maatregelen bij iedere foutcode(P. 647) KOPPELINGEN Basishandelingen voor het scannen van originelen(P. 284) Het verzenden van documenten annuleren(P. 300) Rapporten en lijsten afdrukken(P.
Scannen Helder scannen 2U6C-05U Als u bestanden maakt voor brochures die veel afbeeldingen bevatten of met stiften / potloden geschreven rapporten, kunt u de dichtheid en helderheid aanpassen voor een helderder beeld. Beeldkwaliteit aanpassen(P. 304) Dichtheid aanpassen(P. 305) 303 Scherpte bij het scannen instellen (scherpte)(P.
Scannen Beeldkwaliteit aanpassen 2U6C-05W U kunt de beeldkwaliteit voor de scan selecteren op basis van het type origineel, zoals originelen met alleen tekst, originelen met grafieken en tabellen, of tijdschriftfoto's.
Scannen Dichtheid aanpassen 2U6C-05X U kunt de dichtheid van de scan aanpassen als de tekst of afbeeldingen in een origineel te licht of te donker zijn.
Scannen Scherpte bij het scannen instellen (scherpte) 2U6C-05Y U kunt de scherpte van de afbeelding aanpassen. Stel de scherpte hoger in om onscherpe teksten en lijnen te verscherpen of stel deze lager in om de weergave van tijdschriftfoto's te verbeteren.
Scannen KOPPELINGEN Basishandelingen voor het scannen van originelen(P. 284) I-Faxen verzenden(P. 248) Dichtheid aanpassen(P.
Scannen Handige scanfuncties 2U6C-060 Het apparaat kent veel handige functies, zoals een mogelijkheid beveiligde PDF-bestanden te creëren zodat er niet mee kan worden geknoeid, en een mogelijkheid gegevens nogmaals naar eerder opgegeven bestemmingen te verzenden. De beveiliging van elektronische bestanden verbeteren(P. 309) De juiste balans tussen bestandsgrootte en beeldkwaliteit kiezen (gegevensgrootte)(P. 312) E-mailinstellingen opgeven(P.
Scannen De beveiliging van elektronische bestanden verbeteren 2U6C-061 Digitale bestanden zijn kwetsbaar wat veiligheid betreft, omdat ze gemakkelijk kunnen worden ingezien of worden veranderd zonder dat er een spoor achterblijft. Bij het scannen van belangrijke documenten kunt u de juiste maatregelen nemen zoals gegevens coderen, en een toestel-handtekening zetten om de veiligheid te verbeteren. Een PDF-bestand coderen(P. 309) Een toestel-handtekening toevoegen(P.
Scannen 6 Selecteer . 7 Selecteer het codeerniveau. Codeer het bestand in de 128-bit klasse, wat later door Adobe Acrobat 7.0 of recenter kan worden geopend. Codeer het bestand in de 256-bit klasse, wat later door Adobe Acrobat 10.0 kan worden geopend. ● kan worden veranderd in met een verschillende compatibele versie.
Scannen 3 4 Geef de bestemming op, en eventueel de gewenste scaninstellingen. Basishandelingen voor het scannen van originelen(P. 284) Ga naar . Data opslaan op een USB-geheugentoestel ● Selecteer . E-mail verzenden of data opslaan in een gedeelde map of op een FTP-server ● Selecteer in het tabblad 5 . Selecteer het type PDF-indeling.
Scannen De juiste balans tussen bestandsgrootte en beeldkwaliteit kiezen (gegevensgrootte) 2U6C-062 U kunt de comprimeerverhouding van het bestand opgeven wanneer u gescande originelen converteert naar de JPEG-indeling. Als u selecteert, wordt een hogere compressieverhouding gebruikt dan normaal en is het resultaat een kleiner bestand met een lagere beeldkwaliteit.
Scannen Eerder gebruikte zend-/opslaaninstellingen oproepen (herhaal-instellingen) 2U6C-063 U kunt een bestemming selecteren uit de laatst gebruikte bestemmingen. Als u een eerder gebruikte bestemming opgeeft, worden ook de laatst gebruikte scaninnstellingen, zoals de dichtheid, voor die bestemming geselecteerd. ● Als is ingesteld op , kunt u deze functie niet gebruiken. gebruikte bestemmingen blokkeren(P.
Scannen ➠ De geselecteerde bestemming en de scaninstellingen ervan worden opgegeven. U kunt voorafgaand aan het verzenden de instellingen ook wijzigen. Als u bestemmingen wilt wissen (e-mail/I-Fax) Als u meerdere bestemmingen hebt opgegeven, kunt u indien nodig bestemmingen verwijderen. 1 Selecteer . 2 Schakel het selectievakje voor de te verwijderen bestemming in, en selecteer .
Scannen ➠ Het verzenden / opslaan start. Als het scherm of verschijnt ● Voer naam en wachtwoord van de gebruiker in en selecteer . KOPPELINGEN Basishandelingen voor het scannen van originelen(P. 284) I-Faxen verzenden(P.
Scannen E-mailinstellingen opgeven 2U6C-064 Als u een gescand origineel aan een e-mail toevoegt, kunt u voorafgaand aan het verzenden ervan het onderwerp, de tekst, het antwoordadres en de prioriteit opgeven. 1 Plaats het origineel / de originelen. 2 Selecteer in het scherm Start. Originelen plaatsen(P. 135) Het scherm Start(P. 122) ● Wanneer het aanmeldingsscherm verschijnt, voert u de gebruikersnaam en het wachtwoord in, en geeft u de authenticatie-server op.
Scannen bestemmingen. Als er geen bestemming is opgeslagen in het adresboek, raadpleegt u opslaan(P. 179) . Bestemmingen 1 Selecteer op het tabblad . 2 Selecteer . 3 Schakel het selectievakje voor het gewenste antwoordadres in, en selecteer . Prioriteit instellen 1 Selecteer op het tabblad . 2 Selecteer een prioriteitsniveau. 6 Selecteer .
Scannen ● Als u de naam van de afzender van de e-mail wilt opgeven: KOPPELINGEN Status en logboek van gescande originelen controleren(P. 301) 318 (P.
Scannen Scannen via de computer (extern scannen) 2U6C-065 Om vanaf een computer te scannen, kunt u MF Scan Utility gebruiken, of een toepassing zoals een beeldverwerkingsof tekstverwerkingsprogramma. Als u het met het apparaat meegeleverde ScanGear MF gebruikt, kunt u geavanceerde scaninstellingen configureren ( ScanGear MF gebruiken(P. 322) ). ● Wanneer u het apparaat met een USB-verbinding gebruikt, sluit dan de slaapstand af voordat u gaat scannen. De slaapstand instellen(P.
Scannen Documenten vanuit een toepassing scannen 2U6C-066 U kunt originelen scannen vanuit applicaties zoals software voor beeldverwerking of tekstverwerking. De gescande afbeelding wordt rechtstreeks in het programma geladen waardoor u de afbeelding onmiddellijk kunt bewerken of verwerken. De volgende procedure verschilt afhankelijk van het programma. ● Het programma moet compatibel zijn met TWAIN of WIA*. Raadpleeg voor meer informatie de Help van uw programma.
Scannen KOPPELINGEN ScanGear MF gebruiken(P.
Scannen ScanGear MF gebruiken 2U6C-067 ScanGear MF is een scanner-stuurprogramma dat bij het apparaat wordt geleverd. U kunt ScanGear MF gebruiken om bij het scannen gedetailleerde scaninstellingen op te geven. Hoe ScanGear MF wordt gestart, hangt af van de manier waarop vanaf de computer wordt gescand. Starten vanaf MF Scan Utility Als u scant vanaf MF Scan Utility, klikt u op [ScanGear] om ScanGear MF te starten. Voor meer informatie, klikt u op [Instructies] in MF Scan Utility.
Aan mobiele apparaten koppelen Aan mobiele apparaten koppelen Aan mobiele apparaten koppelen ........................................................................................................ 324 Verbinden met mobiele apparaten .................................................................................................................. 325 Verbinding maken via een draadloos LAN router (LAN-verbinding) ..............................................................
Aan mobiele apparaten koppelen Aan mobiele apparaten koppelen 2U6C-068 Door het apparaat te koppelen aan een mobiel toestel, zoals een smartphone of tablet, kunt u gemakkelijk een juiste toepassing gebruiken voor het afdrukken of een andere bewerking. Tevens kunt u met behulp van een mobiel toestel gebruiken het apparaat op afstand bedienen om de afdrukstatus te bevestigen en de instellingen van het apparaat te wijzigen. Verbinden met mobiele apparaten(P. 325) Direct verbinden (toegangspuntmodus)(P.
Aan mobiele apparaten koppelen Verbinden met mobiele apparaten 2U6C-069 Er zijn twee manieren om een mobiel apparaat te verbinden met het apparaat: via draadloos LAN router, en draadloos en rechtstreeks met het apparaat communiceren. Selecteer de verbindingsmethode die het beste bij uw communicatie-omgeving en apparaten past. Realiseer communicatie met mobiele apparaten van ( Het scherm Start(P. 122) ).
Aan mobiele apparaten koppelen Verbinding maken via een draadloos LAN router (LANverbinding) 2U6C-06A Als een draadloos LAN router is verbonden met het netwerk waarop ook het apparaat is verbonden, kunt u communicatie met het mobiele toestel via de draadloos LAN router op dezelfde manier realiseren voor een computer. Raadpleeg voor meer informatie over hoe u een mobiel toestel aansluit op de LAN router, de handleidingen van uw netwerkapparatuur of neem contact op met de fabrikant.
Aan mobiele apparaten koppelen ◼ Verbinden met behulp van de NFC (Android) Voordat u het NFC gebruikt, controleert u of is ingesteld op . (P. 562) 1 Start Canon PRINT Business op het mobiele toestel. 2 Schakel de NFC-instellingen van het mobiele toestel in. 3 Verplaats het mobiele toestel dichter bij het NFC-merkteken van het apparaat. Het apparaat door toepassingen gebruiken(P. 332) Bedieningspaneel(P.
Aan mobiele apparaten koppelen Direct verbinden (toegangspuntmodus) 2U6C-06C 1660-068 Zelfs in een omgeving zonder draadloos LAN router kunt u met behulp van de 'Toegangspuntmodus', die rechtstreeks een draadloze verbinding tot stand kan brengen tussen het apparaat en uw mobiele toestel, verbinding maken tussen het aanwezige mobiele toestel en het apparaat, zonder moeilijke instellingen. Voorbereiden voor directe verbinding (Toegangspuntmodus)(P. 328) Direct verbinden(P.
Aan mobiele apparaten koppelen Canon PRINT Business ● Voor informatie over besturingssystemen die compatibel zijn met Canon PRINT Business, de gedetailleerde instelprocedure, en de bedieningsprocedure, raadpleegt u de toepassingen-help of de Canon (http:// www.canon.com/gomp/). Direct verbinden ● Het kan even duren voordat een verbinding van het apparaat en het mobiele toestel is gerealiseerd. ◼ Handmatig verbinden 1 Selecteer in het scherm Start. Het scherm Start(P.
Aan mobiele apparaten koppelen 6 Als de doelbewerking is voltooid, selecteert u . ◼ Verbinden met behulp van de NFC (Android) Voordat u het NFC gebruikt, controleert u of is ingesteld op . 1 Selecteer in het scherm Start. (P. 562) Het scherm Start(P. 122) ● Als reeds enig mobiel toestel is verbonden, gaat u naar stap 3. 2 Selecteer . 3 Start Canon PRINT Business op het mobiele toestel.
Aan mobiele apparaten koppelen ● Als tijdens communicatie via Directe verbinding de status zonder dataoverdracht tussen het mobiel toestel en het apparaat voortduurt, kan de communicatie stoppen. ● Spaarstand of sluimermodus reduceren bij een Directe verbinding. ● Als het apparaat wordt gebruikt met een draadloos LAN, moet u het apparaat met het draadloos LAN verbonden houden met behulp van een directe verbinding.
Aan mobiele apparaten koppelen Het apparaat door toepassingen gebruiken 2U6C-06E Afdrukken en andere bewerkingen realiseren vanaf het mobiele toestel dat is verbonden met het apparaat, met behulp van toepassingen. Verschillende toepassingen inclusief toepassingen die exclusief voor Canon zijn, worden ondersteund. Gebruik ze correct in overeenstemming met het apparaat, de toepassing, en de situatie.
Aan mobiele apparaten koppelen ◼ Afdrukken met Google Cloudprinter U kunt toepassingen en diensten gebruiken die Google Cloudprinter gebruiken om af te drukken vanaf een computer of mobiel toestel zonder een printerstuurprogramma te gebruiken. Google Cloudprinter gebruiken(P.
Aan mobiele apparaten koppelen AirPrint gebruiken 2U6C-06F Dit gedeelte beschrijft de instellingen die nodig zijn om AirPrint te gebruiken en de te verrichten procedures bij gebruik van Apple toestellen. AirPrint-instellingen AirPrint-instellingen configureren(P. 334) Het scherm voor AirPrint weergeven(P. 337) Functies van AirPrint Afdrukken met AirPrint(P. 339) Scannen met AirPrint(P. 342) Faxen met AirPrint(P. 344) Problemen oplossen Als AirPrint gebruiken niet mogelijk is(P.
Aan mobiele apparaten koppelen 4 Klik op [Bewerken]. 5 Geef de vereiste instellingen op. [AirPrint gebruiken] Schakel dit selectievakje in als u wilt afdrukken met AirPrint. Schakel het selectievakje uit als u AirPrint wilt uitschakelen. [Printernaam] Voer de naam van het apparaat in. Als een mDNS-naam reeds is geregistreerd in [mDNS-instellingen] ( DNS configureren(P. 56) ), verschijnt de geregistreerde naam. [Locatie] Voer de locatie van het apparaat in.
Aan mobiele apparaten koppelen ● Als u [Printernaam] wijzigt, die u eerder hebt opgegeven, zult u misschien niet meer kunnen afdrukken vanaf de Mac die u tot dan voor het afdrukken hebt kunnen gebruiken. Dit verschijnsel doet zich voor omdat ( DNS configureren(P. 56) ) van IPv4 ook automatisch wordt gewijzigd. U moet in dit geval het apparaat weer aan de Mac toevoegen. ● Als u de printernaam invoert, kunt u meerdere printers die compatibel zijn met AirPrint gemakkelijker identificeren.
Aan mobiele apparaten koppelen
instellingen> Stel in op of Het scherm voor AirPrint weergeven U kunt het scherm van AirPrint weergeven en zo niet alleen toegang krijgen tot de verschillende AirPrint-instellingen, maar ook gegevens van verbruiksartikelen bekijken, zoals papier en tonercartridge. Verder kunt u instellingen van beveiligingsfuncties realiseren.Aan mobiele apparaten koppelen [AirPrint-instellingen] Hiermee kunt u de waarden controleren die zijn ingevoerd in de AirPrint-instellingen, zoals de naam en locatie van het apparaat. U kunt op [Bewerken] klikken om de instellingen te veranderen. [Andere instellingen] [Beveiligingsinstellingen voor afdrukken] Configureer de beveiligingsinstellingen voor afdrukken met behulp van TLS of authenticatie.
Aan mobiele apparaten koppelen Afdrukken met AirPrint 2U6C-06H U kunt afdrukken vanaf een iPad, iPhone, iPod touch, of Mac zonder dat u het printerstuurprogramma hoeft te gebruiken. Afdrukken vanaf een iPad, iPhone of iPod touch(P. 339) Afdrukken vanaf een Mac(P. 340) Systeemvereisten Voor het afdrukken met AirPrint is één van de volgende Apple toestellen vereist. ● iPad (alle modellen) ● iPhone (3GS of hoger) ● iPod touch (derde generatie of hoger) ● Mac (Mac OS X 10.7 of later)* *OS X v10.
Aan mobiele apparaten koppelen 2 Tik in het programma op het Apple-apparaat op om de menuopties weer te geven. 3 Tik op [Druk af]. 4 Selecteer dit apparaat uit de lijst [Printer]. ● De printers in het netwerk worden hier weergegeven. Selecteer dit apparaat. ● Het scherm voor het selecteren van dit apparaat in [Printer] wordt niet weergegeven in programma's die geen ondersteuning bieden voor AirPrint. U kunt dan ook niet draadloos afdrukken vanuit deze programma's.
Aan mobiele apparaten koppelen ● De printers die verbinding hebben met de Mac, worden weergegeven. Selecteer dit apparaat in deze stap. 5 Geef de gewenste afdrukinstellingen op. ● De beschikbare instellingen en papierformaten verschillen afhankelijk van de applicatie die u gebruikt. 6 Klik op [Druk af]. ➠ Het afdrukken wordt gestart.
Aan mobiele apparaten koppelen Scannen met AirPrint 2U6C-06J U kunt met AirPrint de gegevens die door het apparaat zijn gescand, direct overzenden naar een Mac. Systeemvereisten Als u wilt scannen met AirPrint, hebt u een Mac nodig met daarop OS X 10.9 of later geïnstalleerd. Als u wilt scannen met TLS, hebt u een Mac nodig met daarop OS X 10.11 of later geïnstalleerd. Netwerkomgeving Eén van de volgende omgevingen is vereist.
Aan mobiele apparaten koppelen 5 Klik op [Open scanner]. ➠ Het scherm [Scanner] wordt weergegeven. 6 Configureer de scaninstellingen. 7 Klik op [Scan]. ➠ Het origineel wordt gescand, en de afbeelding wordt weergegeven.
Aan mobiele apparaten koppelen Faxen met AirPrint 2U6C-06K U kunt faxen verzenden vanaf een Mac bijna zoals u afdrukt vanaf een Mac. Systeemvereisten Wilt u faxen verzenden met AirPrint, dan hebt u een Mac nodig met OS X 10.9 of later daarop geïnstalleerd. Netwerkomgeving Eén van de volgende omgevingen is vereist.
Aan mobiele apparaten koppelen 6 Klik op [Fax]. ➠ Het verzenden van de fax wordt gestart.
Aan mobiele apparaten koppelen Als AirPrint gebruiken niet mogelijk is 2U6C-06L Als AirPrint gebruiken niet mogelijk is, probeer dan een van de volgende oplossingen. ● Controleer dat het apparaat is ingeschakeld. Als het apparaat is ingeschakeld, schakel het dan eerst uit, wacht ten minste 10 seconden en zet het vervolgens weer aan en kijk of het probleem is verholpen. ● Controleer of er geen foutberichten worden weergegeven op de machine.
Aan mobiele apparaten koppelen Google Cloudprinter gebruiken 2U6C-06R Google Cloudprinter is een service waarmee een gebruiker met een Google-account met behulp van toepassingen die compatibel zijn Google Cloudprinter, kan afdrukken vanaf een smartphone, tablet of computer. In tegenstelling tot conventioneel afdrukken vanaf een computer, heeft het geen printerstuurprogramma nodig. De instellingen van het apparaat controleren(P. 347) De machine registreren bij Google Cloudprinter(P.
Aan mobiele apparaten koppelen ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) . 1 2 Start de externe UI en meld u aan als een beheerder. De UI op afstand starten(P. 424) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 425) 3 Selecteer [Netwerkinstellingen] 4 Klik op [Bewerken] voor [Basisinstellingen].
Aan mobiele apparaten koppelen Registreren vanaf een mobiel toestel of vanuit Google Chrome ● U kunt het apparaat registreren vanaf een mobiel toestel of vanuit Google Chrome. Het display van het apparaat geeft het volgende bevestigingsscherm weer voordat de registratie is voltooid. Druk op om de registratie te voltooien. ● Zie voor informatie over registratiemethoden de handleiding van het toestel of de website van Google Cloudprinter.
Aan mobiele apparaten koppelen Het apparaat via afstandsbediening beheren 2U6C-06S U kunt de Externe UI gebruiken vanaf een webbrowser die op uw smartphone of tablet is geïnstalleerd. Vanaf uw mobiele toestel kunt u de status van het apparaat bevestigen, en instellingen van het apparaat opgeven. Let op: het externe UI-scherm wordt voor sommige apparaten en omgevingen misschien niet goed weergegeven.
Het apparaat beheren Het apparaat beheren Het apparaat beheren ................................................................................................................................. 353 Toegangsmachtigingen instellen ..................................................................................................................... 355 De systeembeheerders-ID en pincode instellen ...........................................................................................
Het apparaat beheren De insteldata importeren en exporteren ...................................................................................................... 446 De Firmware updaten ....................................................................................................................................... 450 Initialiseer instellingen .....................................................................................................................................
Het apparaat beheren Het apparaat beheren 2U6C-06U Om de verschillende risico's bij het gebruik van dit apparaat (bijvoorbeeld lekken van persoonlijke informatie of onbevoegd gebruik door derden) te verminderen, zijn constante en effectieve veiligheidsmaatregelen vereist. Een beheerder moet belangrijke instellingen beheren (zoals toegang tot veiligheidsinstellingen) om te garanderen dat het apparaat veilig wordt gebruikt. ◼ Het basisbeheersysteem configureren Toegangsmachtigingen instellen(P.
Het apparaat beheren ◼ De systeemconfiguratie en -instellingen beheren De Firmware updaten(P. 450) Initialiseer instellingen(P.
Het apparaat beheren Toegangsmachtigingen instellen 2U6C-06W Beveilig het apparaat tegen toegang door onbevoegden door alleen gebruikers met toegangsrechten toe te staan het apparaat te gebruiken. Toegangsrechten worden apart ingesteld voor systeembeheerders, algemene gebruikers en de UI op afstand. Wanneer toegangsrechten zijn ingesteld, moet de gebruiker een ID en pincode invoeren als hij of zij wil afdrukken of instellingen wil wijzigen.
Het apparaat beheren De systeembeheerders-ID en pincode instellen 2U6C-06X Stel het account voor de systeembeheerder 'ID systeembeheerder' in. U kunt ook een pincode instellen bij de ID systeembeheerder. Als de 'ID systeembeheerder' is opgegeven, hebt u bijvoorbeeld uitsluitend beheerdersrechtentoegang tot en als de ID systeembeheerder en bijbehorende pincode juist zijn ingevoerd.
Het apparaat beheren ● Vergeet uw pincode niet. Weet u uw pincode niet meer, neem dan contact op met de plaatselijke officiële Canon-dealer of de Canon-help-lijn. Instellingen configureren via de UI op afstand ● Start de externe UI en meld u in de systeembeheerdersmodus aan. Klik op [Instellingen/registratie] [Gebruikersbeheer] [Systeembeheerderinformatie] [Bewerken] en geef de gewenste instellingen op.
Het apparaat beheren Afdeling-ID beheer configureren 2U6C-06Y U kunt de toegang tot het apparaat beheren door meerdere ID's te gebruiken voor meerdere gebruikers of groepen. Als een gebruiker probeert het apparaat te gebruiken terwijl Afdeling ID beheer is ingeschakeld, verschijnt er een aanmeldingsscherm en moet de gebruiker zijn of haar Afdeling ID met bijbehorende pincode invoeren om toegang te krijgen tot het apparaat.
Het apparaat beheren gebruik van andere functies die documenten scannen door ze op een computer te importeren, 1 Klik op [Nieuwe afdeling registreren]. 2 Geef de vereiste instellingen op. [Afdelings-ID] Voer de te registreren afdelings-ID in. [Pincode instellen] Als u een pincode wilt instellen, schakelt u het selectievakje in en voert u hetzelfde nummer in beide tekstvakken in: [Pincode] en [Bevestigen].
Het apparaat beheren [Paginatotaal afdelings-ID] ● U kunt het totaalaantal pagina's controleren voor taken die zijn verricht, per datum en per Afdelings-ID. ● Als u de aantallen op nul wilt zetten, klikt u op de overeenkomstige tekstkoppeling onder [Afdelings-ID] en klikt u op [Wis teller] [OK]. Als u de aantallen van alle Afdeling ID's op nul wilt zetten, klikt u op [Alle tellers wissen] [OK].
Het apparaat beheren [Afdelings-ID beheer] Schakel het selectievakje in om Afdeling ID beheer te activeren. Als u Afdeling ID beheer niet wilt gebruiken, schakelt u het selectievakje uit. ● Voor informatie over de selectievakjes [Afdrukopdrachten met onbekende ID's toestaan]/[Scanopdrachten met onbekende ID's toestaan] raadpleegt u Taken blokkeren indien afdelings-id onbekend(P. 363) . 6 Klik op [OK].
Het apparaat beheren 3 Klik op het tabblad [Apparaatinstellingen]. 4 Selecteer [Beheer afdelings-id] onder [Gebruikersbeheer]. 5 Klik op [Instellingen] aan de rechterkant. 6 Geef de instellingen op en klik op [OK]. [Pincode instellen toestaan] Schakel het selectievakje voor het gebruik van een pincode in. [Afdelings-id] Voer het nummer van de Afdelings-ID in. [Pincode] Voer, naar noodzaak, de pincode in die bij de afdelings-ID behoort.
Het apparaat beheren Taken blokkeren indien afdelings-id onbekend Als u de standaardinstellingen ongewijzigd laat, kan elke gebruiker afdrukken vanaf een computer, scannen (via en ), een PC Fax verzenden vanaf een computer zonder dat een id en pincode hoeven worden ingevoerd, zelfs als Afdelings-ID beheer is ingeschakeld voor de machine.
Het apparaat beheren De systeembeheerders-ID en pincode instellen(P.
Het apparaat beheren Een pincode instellen voor UI op afstand 2U6C-070 U kunt een pincode instellen voor toegang tot de UI op afstand. Alle gebruikers gebruiken een gewone pincode. ● Wanneer Afdelings-ID beheer is ingeschakeld, is deze instelling niet vereist. configureren(P. 358) Afdeling-ID beheer ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) .
Het apparaat beheren Het bedieningspaneel gebruiken ● U kunt de pincode-instellingen voor toegang tot de UI op afstand ook bereiken via
in het scherm Start. (P. 565) Als zijn geïnitialiseerd ● De pincode voor toegang tot de UI op afstand wordt ook geïnitialiseerd. Reset de pincode na een initialisatie. (P. 568) KOPPELINGEN Toegangsmachtigingen instellen(P. 355) De systeembeheerders-ID en pincode instellen(P.Het apparaat beheren LDAP-Server-authenticatie 2U6C-071 Als er op uw systeem een LDAP-server is geïnstalleerd, kunt u ervoor zorgen dat LDAP-server-authenticatie wordt uitgevoerd wanneer de zendfunctie wordt gebruikt. Zo voorkomt u onbevoegd gebruik door derden en het lekken van informatie.
Het apparaat beheren 6 Configureer de instellingen voor het verzenden van e-mail/I-Faxen. [E-mail-/I-faxverzending] Selecteer of u het verzenden van e-mails en I-Faxen wilt toestaan. [Niet toestaan] Blokkeert het verzenden van e-mails en I-Faxen. en kunnen in de scanfunctie niet meer worden gebruikt. [Toestaan] Staat uitgaande e-mail en I-Faxen toe.
Het apparaat beheren [Bestandsverzending] Stel in of u opslaan in gedeelde mappen of op FTP-servers wil toestaan. [Niet toestaan] Blokkeert het opslaan in gedeelde mappen en op FTP-servers. in de scanfunctie gebruiken is niet langer mogelijk. [Toestaan] Opslaan in gedeelde mappen en op FTP-servers wordt niet geblokkeerd. [Alleen toestaan naar mezelf of Blokkeert opslaan in alle gedeelde mappen en FTP-servers, die niet als mappen zijn opgegeven.
Het apparaat beheren [Het authenticatiescherm weergeven zonder authenticatiegegevens] Geeft het authenticatiescherm weer met de velden van de gebruikersnaam en het wachtwoord niet ingevuld. [Bestemmingsmap opgeven] Schakelt u dit selectievakje in, dan kunt u de map opgeven waar de gegevens worden opgeslagen. Als het selectievakje niet is ingeschakeld, wordt de bestemming voor het opslaan ingesteld op basis van de geautoriseerde informatie over de gebruiker die is geregistreerd op de LDAP-server.
Het apparaat beheren De netwerkinstellingen configureren 2U6C-072 Bevoegde gebruikers kunnen worden benadeeld door aanvallen van kwaadwillende personen, bijvoorbeeld door sniffing, spoofing en het manipuleren van gegevens die over een netwerk worden verzonden. Om uw belangrijke en kostbare gegevens te beschermen tegen deze aanvallen, ondersteunt de machine de volgende functies ter verbetering van de veiligheid en beveiliging.
Het apparaat beheren IPSec-communicatie Terwijl TLS alleen de gegevens codeert die in een bepaald programma worden gebruikt, zoals een webbrowser of een e-mailprogramma, worden met IPSec alle IP-pakketten (of payloads daarvan) gecodeerd. Dit betekent dat met IPSec een flexibelere beveiliging kan worden gerealiseerd dan met TLS. IPSec-instellingen configureren(P. 396) Verificatie met IEEE 802.1X IEEE 802.
Het apparaat beheren Communicatie beperken door firewalls in te stellen 2U6C-073 Zonder goede beveiliging kunnen onbevoegden toegang krijgen tot computers en andere communicatieapparaten die op een netwerk zijn aangesloten. Om deze ongewenste toegang te voorkomen, kunt u instellingen opgeven voor het filteren van gegevenspakketten. Op deze manier wordt de communicatie beperkt tot apparaten met bepaalde IPadressen of MAC-adressen. IP-adressen opgeven voor firewallinstellingen(P.
Het apparaat beheren IP-adressen opgeven voor firewallinstellingen 2U6C-074 U kunt de communicatie beperken tot alleen apparaten met bepaalde IP-adressen, of apparaten met specifieke IPadressen blokkeren maar andere communicatie toestaan. U kunt een afzonderlijk IP-adres opgeven of een bereik van IP-adressen. ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) .
Het apparaat beheren 1 Schakel het selectievakje [Gebruik filter] in en selecteer het keuzerondje [Weigeren] of [Toestaan] voor het [Standaardbeleid]. [Gebruik filter] Schakel het selectievakje in als u de communicatie wilt beperken. Schakel het selectievakje uit als u de beperking wilt opheffen. [Standaardbeleid] Selecteer de voorwaarde voor het toestaan of weigeren van de communicatie van andere toestellen met het apparaat.
Het apparaat beheren IPv4: Gebruik een punt als scheidingsteken. Een specifiek adres invoeren 192.168.0.10 IPv6: Gebruik een dubbele punt als scheidingsteken tussen alfanumerieke tekens. fe80::10 Een bereik van adressen opgeven Plaats een afbreekstreepje tussen de adressen. 192.168.0.10-192.168.0.20 Een bereik van adressen opgeven met een voorvoegsel Typ het adres, gevolgd door een schuine streep en een getal dat de lengte van het voorvoegsel aangeeft. 192.168.0.
Het apparaat beheren MAC-adressen opgeven voor firewallinstellingen 2U6C-075 U kunt de communicatie beperken tot alleen apparaten met bepaalde MAC-adressen of apparaten met specifieke MAC-adressen blokkeren maar andere communicatie toestaan. Deze functie is niet beschikbaar wanneer het apparaat is verbonden met een draadloos LAN.
Het apparaat beheren 1 Schakel het selectievakje [Gebruik filter] in en selecteer het keuzerondje [Weigeren] of [Toestaan] voor het [Standaardbeleid]. [Gebruik filter] Schakel het selectievakje in als u de communicatie wilt beperken. Schakel het selectievakje uit als u de beperking wilt opheffen. [Standaardbeleid] Selecteer de voorwaarde om de communicatie van andere apparaten met het apparaat toe te staan of te weigeren.
Het apparaat beheren ● Selecteer een MAC-adres en klik op [Verwijderen]. 3 6 Klik op [OK]. Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt ook het filteren van MAC-adressen in- of uitschakelen vanuit
in het scherm Start. adresfilter>(P. 480) KOPPELINGEN IP-adressen opgeven voor firewallinstellingen(P.Het apparaat beheren Poortnummers wijzigen 2U6C-076 Poorten vormen het eindpunt van het communicatietraject tussen apparaten. Belangrijke protocollen maken meestal gebruik van vaste poortnummers. Een nadeel hiervan is dat apparaten met deze poortnummers kwetsbaar zijn voor aanvallen, iedereen weet de poortnummers namelijk. De netwerkbeheerder kan de beveiliging verder verbeteren door andere poortnummers te gebruiken.
Het apparaat beheren KOPPELINGEN Printerpoorten configureren(P.
Het apparaat beheren Een proxy instellen 2U6C-077 Een proxy (of HTTP-proxyserver) verwijst naar een computer of software die HTTP-communicatie uitvoert voor andere apparaten, met name bij communicatie met bronnen buiten het netwerk, zoals bij het browsen op websites. De clientapparaten maken via de proxyserver verbinding met het externe netwerk en communiceren niet rechtstreeks met de externe bronnen.
Het apparaat beheren [Adres HTTP-proxyserver] Voer het adres van de proxyserver in. Geef het IP-adres op of de hostnaam, afhankelijk van de omgeving. [Poortnummer HTTP-proxyserver] Het poortnummer naar noodzaak wijzigen. [Gebruik proxy binnen zelfde domein] Schakel het selectievakje in als u ook de opgegeven proxyserver wilt gebruiken voor communicatie met toestellen in hetzelfde domein.
Het apparaat beheren De sleutel en certificaat voor TLS configureren 2U6C-078 Met TLS (Transport Layer Security) kunt u de communicatie versleutelen die plaatsvindt tussen het apparaat en een webbrowser op de computer. TLS is een techniek voor het versleutelen van gegevens die via het netwerk worden verzonden of ontvangen. TLS moet zijn ingeschakeld wanneer u de UI op afstand gebruikt voor het opgeven van instellingen voor IPSec (Methode gedeelde sleutel), IEEE 802.1X-verificatie (TTLS/PEAP) of SNMPv3.
Het apparaat beheren 7 Klik op [Bewerken]. 8 Schakel het selectievakje [Gebruik TLS] in en klik op [OK]. 9 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt communicatie met TLS-versleuteling ook in- of uitschakelen vanuit
in het scherm Start. (P.Het apparaat beheren De TLS-versie beperken ● Selecteer [Toegestane versies] op de pagina [TLS-instellingen] van de externe UI, en geef de boven- en ondergrens op. KOPPELINGEN De sleutel en certificaat voor netwerkcommunicatie genereren(P. 387) Een sleutel en certificaatondertekeningsverzoek (CSR) aanmaken(P. 390) De sleutel en certificaat voor netwerkcommunicatie registreren(P. 394) IPSec-instellingen configureren(P. 396) IEEE 802.1X-verificatie-instellingen configureren(P.
Het apparaat beheren De sleutel en certificaat voor netwerkcommunicatie genereren 2U6C-079 U kunt een sleutel en certificaat genereren met het apparaat als dit nodig is voor gecodeerde communicatie via Transport Layer Security (TLS). U kunt TLS gebruiken voor toegang tot het apparaat via de externe UI. Zelfondertekende certificaten worden gebruikt bij de sleutel en certificaat die zijn gegenereerd in 'Netwerkcommunicatie'.
Het apparaat beheren [Sleutelinstellingen] [Sleutelnaam] Gebruik alfanumerieke tekens voor de naam van de sleutel. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] Selecteer het sleutelgenereeralgoritme uit [RSA] of [ECDSA], en selecteer dan de sleutellengte in de vervolgkeuzelijst. In alle gevallen: hoe groter het getal voor de sleutellengte is, hoe hoger het veiligheidsniveau wordt.
Het apparaat beheren 7 Klik op [OK]. ● Het genereren van sleutel en certificaat kan enige tijd duren. ● Als sleutel en certificaat zijn gegenereerd, worden ze automatisch opgeslagen op het apparaat. KOPPELINGEN De sleutel en certificaat voor netwerkcommunicatie registreren(P. 394) De sleutel en certificaat voor TLS configureren(P. 384) IPSec-instellingen configureren(P.
Het apparaat beheren Een sleutel en certificaatondertekeningsverzoek (CSR) aanmaken 2U6C-07A Op het apparaat gegenereerde certificaten hebben geen CA-handtekening, een communicatiefout kan het gevolg zijn, afhankelijk van de apparaten waarmee het communiceert. Voordat de certificeringsinstantie het certificaat met CAhandtekening kan afgeven, moet u CSR-gegevens (Certificate Signing Request) verkrijgen die de beheerder van de externe UI kan genereren.
Het apparaat beheren [Sleutelinstellingen] [Sleutelnaam] Gebruik alfanumerieke tekens voor de naam van de sleutel. Kies een naam die u eenvoudig kunt terugvinden in lijsten. [Handtekeningalgoritme] Selecteer het algoritme voor de handtekening in de vervolgkeuzelijst. [Sleutelalgoritme] Selecteer het sleutelgenereeralgoritme uit [RSA] of [ECDSA], en selecteer dan de sleutellengte in de vervolgkeuzelijst. In alle gevallen: hoe groter het getal voor de sleutellengte is, hoe langzamer de communicatie verloopt.
Het apparaat beheren 8 Klik op [Opslaan in bestand]. ● Er wordt een dialoogvenster voor het opslaan van het bestand weergegeven. Kies waar u het bestand wilt opslaan en klik op [Opslaan]. ➠ Het CSR-bestand wordt opgeslagen op de computer. 9 Hecht het opgeslagen bestand aan en leg de applicatie voor aan de certificeringsinstantie (CA).
Het apparaat beheren De sleutel en certificaat voor TLS configureren(P. 384) De sleutel en certificaat voor netwerkcommunicatie genereren(P. 387) De sleutel en certificaat voor netwerkcommunicatie registreren(P. 394) IPSec-instellingen configureren(P.
Het apparaat beheren De sleutel en certificaat voor netwerkcommunicatie registreren 2U6C-07C U kunt sleutel en certificaat verkrijgen, en het CA-certificaat van een certificeringsinstantie (CA) voor gebruik met het apparaat. Installeer en registreer de verkregen sleutel en certificaat en het certificaatbestand in dit apparaat met behulp van de externe UI. Controleer eerst sleutel en certificaat, en CA-certificaatcondities die vereist zijn voor het apparaat ( Beheerfuncties(P. 698) ).
Het apparaat beheren 5 Klik op [Installeren]. Het bestand voor sleutel en certificaat, of het CA-certificaat verwijderen ● Klik op [Verwijderen] rechts van het bestand dat u wilt wissen 6 klik op [OK]. Klik op [Bladeren], selecteer het bestand dat u wilt installeren en klik op [Start installatie]. ➠ Het bestand voor sleutel en certificaat, of het CA-certificaatbestand is vanaf een computer geïnstalleerd op het apparaat. 7 Registreer de sleutel en certificaat of het CA-certificaat.
Het apparaat beheren IPSec-instellingen configureren 2U6C-07E Internet Protocol Security (IPSec of IPsec) bestaat uit een verzameling protocollen voor het coderen van gegevens die worden getransporteerd over een netwerk, inclusief internet-netwerken.
Het apparaat beheren ● Voor meer informatie over de basishandelingen die moeten worden verricht wanneer u het apparaat instelt via de externe UI, raadpleegt u Menuopties instellen via de UI op afstand(P. 433) . 1 2 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P. 424) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 425) 3 Selecteer [Netwerkinstellingen] 4 Klik op [Bewerken].
Het apparaat beheren [Lokaal adres] Selecteer het keuzerondje voor het type IP-adres van het apparaat waarop u het beleid wilt toepassen. [Alle IP-adressen] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten. [IPv4-adres] Selecteer deze optie om IPSec te gebruiken voor alle IP-pakketten die van of naar het IPv4-adres van het apparaat worden verstuurd.
Het apparaat beheren Beschrijving Een specifiek adres invoeren Voorbeeld IPv4: Gebruik een punt als scheidingsteken. 192.168.0.10 IPv6: fe80::10 Gebruik een dubbele punt als scheidingsteken tussen alfanumerieke tekens. Een bereik van adressen opgeven Plaats een afbreekstreepje tussen de adressen. 192.168.0.10-192.168.0.20 [Subnetinstellingen] Als u het IPv4-adres handmatig invoert, kunt u een bereik opgeven door het subnetmasker te gebruiken.
Het apparaat beheren Geef aan hoe lang een sessie duurt voor IKE SA (ISAKMP SA). Geef de tijd op in minuten. [Authenticatie]/[Encryptie]/[DH-groep] Selecteer een algoritme in de vervolgkeuzelijst. Alle algoritmen worden gebruikt bij het uitwisselen van de sleutels. [Authenticatie] Selecteer het hash-algoritme. [Encryptie] Selecteer het coderingsalgoritme. [DH-groep] Selecteer de Diffie-Hellman-groep, die bepalend is voor de sterkte van de sleutel.
Het apparaat beheren u wilt instellen. Als u beide selectievakjes inschakelt, wordt de IPSec SA-sessie beëindigd als aan één van de beide voorwaarden wordt voldaan. [Geef tijd op] Typ het aantal minuten voor de tijdsduur van een sessie. [Geef formaat op] Typ een grootte in MB om aan te geven hoeveel gegevens er in een sessie kunnen worden getransporteerd. [Selecteer algoritme] Schakel het selectievakje [ESP], [ESP (AES-GCM)] en/of [AH (SHA1)] in, afhankelijk van de gebruikte IPSecheader en algoritme.
Het apparaat beheren 13 Start de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Het bedieningspaneel gebruiken ● U kunt ook IPSec-communicatie inschakelen of uitschakelen vanuit
in het scherm Start. IPSec>(P. 475) KOPPELINGEN De sleutel en certificaat voor TLS configureren(P. 384) IPSec-beleidslijst(P.Het apparaat beheren IEEE 802.1X-verificatie-instellingen configureren 2U6C-07F De machine kan als een clientapparaat worden aangesloten op een 802.1X-netwerk. Een doorsnee 802.1X-netwerk bestaat uit een RADIUS-server (verificatieserver), een LAN-switch (authenticator) en clientapparaten met verificatiesoftware (supplicants). Als een apparaat probeert verbinding te maken met het 802.
Het apparaat beheren 1 2 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P. 424) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 425) 3 Selecteer [Netwerkinstellingen] 4 Klik op [Bewerken]. 5 Schakel het selectievakje [Gebruik IEEE 802.1X] in, en typ de aanmeldingsnaam in het [IEEE 802.1X-instellingen]. vak [Inlognaam]. [Gebruik IEEE 802.1X] Schakel dit selectievakje in om verificatie met IEEE 802.1X mogelijk te maken.
Het apparaat beheren Details bekijken van een certificaat ● U kunt de details van het certificaat controleren of het certificaat verifiëren door op de gewenste tekstkoppeling onder [Sleutelnaam] te klikken of op het pictogram van het certificaat. TTLS/PEAP instellen 1 Schakel het selectievakje [Gebruik TTLS] of [Gebruik PEAP] in. Intern protocol voor TTLS ● U kunt MSCHAPv2 of PAP selecteren. 2 Klik op [Wijzig gebruikersnaam/wachtwoord].
Het apparaat beheren Het bedieningspaneel gebruiken ● U kunt ook IEEE 802.1X authenticatie inschakelen of uitschakelen vanuit
in het scherm Start. (P. 478) KOPPELINGEN De sleutel en certificaat voor TLS configureren(P.Het apparaat beheren De functies van de machine beperken 2U6C-07H De kans bestaat dat sommige functies van de machine bijna nooit worden gebruikt of aanleiding geven voor misbruik. Uit veiligheidsoverwegingen kunt u de functionaliteit van de machine beperken door deze functies geheel of gedeeltelijk uit te schakelen.
Het apparaat beheren Extern beheer uitschakelen Als u de externe UI niet gebruikt, kunt u functies uitschakelen om onbevoegde externe bewerkingen via de externe UI te verhinderen. De UI op afstand uitschakelen(P.
Het apparaat beheren Beperkingen instellen voor de toegang tot het adresboek- en verzendfuncties 2U6C-07J Bepaalde vormen van informatielekkage kunt u voorkomen door de beschikbare bestemmingen voor faxen en e-mails te beperken tot de bestemmingen in het adresboek of op LDAP-servers. Een andere manier is om een pincode in te stellen voor het adresboek, zodat onbevoegde gebruikers het adresboek niet kunnen aanpassen.
Het apparaat beheren Gebruik van het adresboek beperken 2U6C-07K U kunt instellen dat gebruikers een pincode moeten invoeren om nieuwe vermeldingen toe te voegen aan het adresboek of bestaande vermeldingen aan te passen. Als u een pincode instelt voor het adresboek, wordt de kans kleiner dat documenten worden verstuurd naar verkeerde ontvangers omdat het adresboek alleen nog kan worden gewijzigd door gebruikers die de pincode weten. 1 Selecteer
in het scherm Start.Het apparaat beheren Bestemmingen opslaan(P. 179) Bestemmingen vanaf een externe UI registreren(P. 436) Basisinstellingen voor e-mail configureren(P. 88) Een gedeelde map instellen als een opslaglocatie(P.
Het apparaat beheren Beperkingen instellen voor beschikbare bestemmingen 2U6C-07L Door het aantal bestemmingen dat kan worden opgegeven, te beperken tot de nummers die al in het adresboek of op LDAP-servers zijn opgeslagen, kunt u de kans op onbedoelde bestemmingen verkleinen en het lekken van informatie door gebruikers verhinderen. U kunt instellen dat er een bevestigingsscherm verschijnt zodat de gebruiker geen verkeerd nummer draait wanneer hij een kiescodenummer opgeeft in het adresboek.
Het apparaat beheren geselecteerde/ingevoerde code voor verkort kiezen worden weergegeven op het apparaat voordat de documenten naar die bestemming op het scherm kan worden verzonden.
kiescode> Bestemmingen controleren tijdens het verzenden van gegevens U kunt een instelling zodanig configureren dat het scherm voor het bevestigen van de bestemming verschijnt als verzending van een fax, e-mail, of I-Fax start.Het apparaat beheren De verzendfuncties van de fax beperken 2U6C-07R U kunt verschillende beperkingen instellen voor het verzenden van faxen, die kunnen verhinderen dat informatie naar derden lekt of dat documenten naar onbedoelde bestemmingen worden verzonden. Het ingevoerde faxnummer bevestigen(P. 414) Faxen verzenden vanaf een computer beperken(P. 414) Groepsverzending beperken(P.
Het apparaat beheren Eerder gebruikte zendinstellingen oproepen (herhaal-instellingen)(P. 231) Faxen versturen vanaf uw computer(P. 244) Afdelings-ID-beheer instellen voor taken vanaf een computer(P. 361) Gebruik van het adresboek beperken(P. 410) Beperkingen instellen voor beschikbare bestemmingen(P.
Het apparaat beheren Afdrukken vanaf een computer beperken 2U6C-07S U kunt informatielekken drastisch reduceren door het aantal vanaf een computer afdrukbare documenten te beperken tot de 'Beveiligd afdrukken' documenten ( Een met pincode beveiligd document afdrukken (Beveiligde afdruk)(P. 266) ).
Het apparaat beheren Beperkingen instellen voor USB-functies 2U6C-07U USB is een handige manier om randapparatuur aan te sluiten en gegevens op te slaan of te verplaatsen. Bij een onjuist beheer kan USB echter ook een bron van informatielekkage zijn. Wees voorzichtig wanneer u USBgeheugenapparaten gebruikt. Dit gedeelte beschrijft hoe u de verbinding via de USB-poort van het apparaat kunt beperken en hoe u het gebruik van USB-geheugenapparaten kunt uitsluiten.
Het apparaat beheren KOPPELINGEN Basishandelingen voor het scannen van originelen(P. 284) Afdrukken vanaf een USB-geheugenapparaat (afdrukken via geheugenmedia)(P.
Het apparaat beheren HTTP-communicatie uitschakelen 2U6C-07W HTTP wordt gebruikt voor communicatie via het netwerk, bijvoorbeeld wanneer u het apparaat bedient via de UI op afstand. Als u een USB-verbinding gebruikt of HTTP om een andere reden niet nodig hebt, kunt u het protocol uitschakelen om aanvallen van kwaadwillende gebruikers via de ongebruikte HTTP-poort te voorkomen.
Het apparaat beheren De UI op afstand uitschakelen 2U6C-07X De UI op afstand is handig omdat u dan instellingen voor de machine kunt opgeven via een webbrowser op een computer. U kunt de UI op afstand alleen gebruiken als de machine via het netwerk is verbonden met een computer.
Het apparaat beheren De beveiliging van documenten verbeteren 2U6C-07Y Het apparaat heeft beveiligingsfuncties die moeten verhinderen dat gegevens uit documenten weglekken of dat er met de documenten wordt geknoeid. Apparaathandtekening De toestel-handtekening wordt toegevoegd aan gescande documenten met behulp van een sleutel-encertificaatmechanisme om de ontvanger te laten zien dat het document op het apparaat is gemaakt.
Het apparaat beheren Een handtekeningsleutel voor het apparaat genereren 2U6C-080 U kunt sleutel en certificaat genereren voor de toestel-handtekening, om te laten zien dat een document is gescand op het apparaat. Het certificaat wordt aangehecht wanneer een document wordt gescand en wordt geconverteerd tot een PDF-bestand. ● Uitsluitend één sleutel en certificaat kan worden gegenereerd voor de toestel-handtekening. U kunt ze niet verwijderen.
Het apparaat beheren Het apparaat vanaf een computer beheren (externe UI) 2U6C-081 Als u een webbrowser gebruikt om het apparaat op afstand te bedienen, kunt u de documenten die wachten om te worden afgedrukt, of de status van het apparaat controleren. U kunt ook verschillende instellingen realiseren. U hoeft uw bureau dus niet te verlaten om systeembeheertaken uit te voeren. Voor meer informatie over de systeemvereisten voor de externe UI, raadpleegt u Besturingssystemen(P. 701) .
Het apparaat beheren De UI op afstand starten 2U6C-082 Om het apparaat op afstand te bedienen, moet u het IP-adres van het apparaat in een webbrowser invoeren en de UI op afstand opstarten. Controleer vooraf het IP-adres dat op het apparaat is ingesteld ( Netwerkinstellingen weergeven(P. 38) ). Als u vragen hebt, neemt u contact op met de netwerkbeheerder. 1 Start de webbrowser. 2 Typ 'http:///' in het adresveld en druk op [ENTER].
Het apparaat beheren [Toegangspincode externe UI] Als [Toegangspincode externe UI] is ingesteld, voer dan de pincode in. afstand(P. 365) Een pincode instellen voor UI op Wanneer Afdelings-id beheer is ingeschakeld Voer het juiste ID in bij [Afdelings-ID] en pincode bij [Pincode]. 4 Afdeling-ID beheer configureren(P. 358) Klik op [Aanmelden]. ➠ De portaalpagina (hoofdpagina) wordt weergegeven. Scherm van externe UI(P.
Het apparaat beheren Pictogram Vernieuwen Hiermee vernieuwt u de weergegeven pagina. [Language] Hiermee selecteert u de taal voor de schermen van de externe UI. [Afmelden] Hiermee meldt u zich af bij de UI op afstand. UI staat trouwens voor User Interface, ofwel gebruikersinterface in het Nederlands. De aanmeldingspagina wordt vervolgens weergegeven.
Het apparaat beheren Status en logboeken controleren 2U6C-083 De huidige status van afdruktaken controleren(P. 427) De huidige status van ontvangen documenten controleren(P. 428) Taakgeschiedenis controleren(P. 428) Informatie bekijken van documenten waarvan het doorsturen is mislukt(P. 428) Foutgegevens controleren(P. 429) Verbruiksartikelen controleren(P. 429) Apparaatspecificaties controleren(P. 430) Gegevens van systeembeheerder controleren(P. 430) Totaal aantal afdrukken controleren(P.
Het apparaat beheren ● Klik op [Opdrachtnummer] op de gepauzeerde documenten en de beveiligde documenten om gedetailleerde informatie weer te geven. U kunt de gebruikersnaam en de paginatelling van het afgedrukte document controleren. De huidige status van ontvangen documenten controleren Hiermee kunt u de logboeken van ontvangen fax- en I-Fax-documenten controleren. U kunt ook, om een ontvangen faxdocument te verwijderen, op [Verwijderen] klikken. Log in op de externe UI ( De UI op afstand starten(P.
Het apparaat beheren Log in op de externe UI ( De UI op afstand starten(P. 424) ) annuleren] [Fouten met doorzenden] [Statusmonitor/ ● Wanneer u zich hebt aangemeld in de systeembeheerdersmodus, kunt u op [Verwijderen] om documenten te verwijderen waarvan het doorsturen is mislukt. ● Wanneer u zich hebt aangemeld in de systeembeheerdersmodus, kunt u op [Opdrachtnummer] om gedetailleerde informatie weer te geven van, of een voorbeeld te bekijken van het document waarvan het doorsturen is mislukt.
Het apparaat beheren Apparaatspecificaties controleren De maximale afdruksnelheid en de apparaatfuncties verschijnen. Log in op de externe UI ( De UI op afstand starten(P. 424) ) [Statusmonitor/annuleren] [Apparaatfuncties] Gegevens van systeembeheerder controleren U kunt informatie over het apparaat en de systeembeheerder weergeven.
Het apparaat beheren Totaal aantal afdrukken controleren U kunt controleren hoeveel pagina's er in totaal zijn afgedrukt, gekopieerd en als fax zijn ontvangen. Log in op de externe UI ( De UI op afstand starten(P. 424) ) [Controleer tellerstand] [Statusmonitor/annuleren] Geschiedenis van tonercartridges bekijken U kunt de gebruikslogboeken van tonercartridges en andere logboeken controleren. Log in op de externe UI ( [Cartridgelog] De UI op afstand starten(P.
Het apparaat beheren De gebruiksstatus van het apparaat controleren Het maandelijkse afdruktotaal en het maandelijkse stroomverbruik worden weergegeven. U kunt het scherm Eco Information oproepen en de instellingen veranderen om papier te besparen en het stroomverbruik te verminderen. Log in op de externe UI ( De UI op afstand starten(P. 424) ) annuleren] [Eco-informatie] KOPPELINGEN Scherm van externe UI(P.
Het apparaat beheren Menuopties instellen via de UI op afstand 2U6C-084 U kunt verschillende instellingen van de machine wijzigen met de externe UI. De meeste instellingen kunnen ook via het bedieningspaneel van de machine worden gewijzigd, maar sommige instellingen kunt u alleen wijzigen via de externe UI. Dit gedeelte beschrijft de basisprocedure voor het veranderen van de instelling van het apparaat met behulp van de externe UI.
Het apparaat beheren 5 Klik op [Bewerken]. 6 Geef de vereiste instellingen op. 7 Klik op [OK].
Het apparaat beheren 8 Start, naar noodzaak, de machine opnieuw op. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. ● Voor informatie of u het apparaat opnieuw moet opstarten, raadpleegt u het bericht op het bewerkingsscherm.
Het apparaat beheren Bestemmingen vanaf een externe UI registreren 2U6C-085 1660-083 U kunt de computer gebruiken om bestemmingen in het adresboek van het apparaat te registreren en informatie van geregistreerde bestemmingen te bewerken. Geef hier de gedeelde map of FTP-server als bestemming op. ● U kunt de instellingen alleen wijzigen als u zich aanmeldt in de Systeembeheerder-modus. 1 Start de externe UI. 2 Klik op [Adresboek] op de portaalpagina. De UI op afstand starten(P.
Het apparaat beheren 5 Selecteer het type bestemming dat u wilt registreren en klik op [OK]. ● Om de gedeelde map of van de FTP-server als bestemming te registreren, selecteert u [Bestand]. 6 Geef de bestemming op. De faxbestemming registreren [Naam] Voer hier de naam van de bestemming in. [Faxnummer] Voer hier het faxnummer van de bestemming in.
Het apparaat beheren De e-mail of I-Fax als bestemming registreren [Naam] Voer hier de naam van de bestemming in. [E-mailadres]/[I-faxadres] Voer hier het e-mailadres van de bestemming in. De gedeelde map of de FTP-server als bestemming registreren [Naam] Voer hier de naam voor de bestemming in. [Protocol] Selecteer het protocol voor de bestemming. [Windows (SMB)] Selecteer dit als u een gedeelde map als bestemming registreert. [FTP] Selecteer dit als u een FTP-server als bestemming registreert.
Het apparaat beheren [Mappad] Voer de locatie in van de map waar de gegevens naartoe worden gezonden. ● Voor een gedeelde map Gebruik '\' als scheidingsteken. Geef het vervolgpad op voor het pad dat in [Hostnaam] is ingesteld. ● Voor een FTP-server Gebruik '\' als scheidingsteken. Het pad is een absoluut pad als het begint met '/'. Als dat niet het geval is, gaat het om een relatief pad dat naar de huidige map van de aangemelde gebruiker verwijst.
Het apparaat beheren Beveiligingsprincipes 2U6C-086 Organisaties hebben meestal beveiligingsprincipes met definitie van basisinformatie-beveiligingsdoelen en normen, volgens welke informatie-apparatuur zoals computers en multifunctionele printers moeten werken. Eventuele voor uw bedrijf geldende beveiligingsprincipes moeten ook op dit apparaat worden toegepast. De beveiligingsprincipes bekijken(P. 440) Items van de beveiligingsprincipes(P. 440) Het beveiligingsprincipe op het apparaat toepassen(P.
Het apparaat beheren [USB-beleid] Verhindert onbevoegde toegang en inbreuk op gegevens door een USB-verbinding te verbieden. [Gebruik als USB-apparaat verbieden] is ingesteld op . Het is niet mogelijk toegang tot een computer te krijgen via USB. (P. 482) [Gebruik als USB-opslagapparaat verbieden] is ingesteld op . opslagapparaat>(P. 482) Het is niet mogelijk om USB-geheugenapparaten te gebruiken.
Het apparaat beheren Verhinder externe inbreuk door ongebruikte poorten te sluiten. [LPD-poort beperken (poortnummer: 515)] In is ingesteld op . LPD-afdrukken is niet mogelijk. (P. 474) [RAW-poort beperken In is ingesteld op (poortnummer: 9100)] . RAW-afdrukken is niet mogelijk. (P.
Het apparaat beheren [SLP-poort beperken (poortnummer: 427)] [SNMP-poort beperken (poortnummer: 161)] In [Instellingen Multicast Discovery] is [Respons van Discovery] ingesteld op [Uit]. Het is niet mogelijk om het netwerk te doorzoeken, of automatische instellingen te realiseren met SLP-communicatie met software voor apparaatbeheer behulp van SLP. configureren(P. 75) In , zijn de en ingesteld op , en
Het apparaat beheren Gebruikers die verschillende malen achter elkaar mislukte inlogpogingen hebben ondernemen, moet u blokkeren door het inloggen te verhinderen. [Blokkering inschakelen] In , is ingesteld op . Geef de waarden op voor en . (P.
Het apparaat beheren ◼ [Opslag] [Volledig verwijderen van gegevens verplichten] Deze functie is niet beschikbaar op dit apparaat, daarom geen verandering van het beveiligingsniveau. Het beveiligingsprincipe op het apparaat toepassen U kunt het op de imageRUNNER ADVANCE serie bewerkte beveiligingsprincipe importeren, of het met behulp van software voor apparaatbeheer toepassen op dit apparaat.
Het apparaat beheren De insteldata importeren en exporteren 2U6C-087 Data in het adresboek of van apparaatinstellingen kan op de computer worden opgeslagen (exporteren). Omgekeerd kan ook. Data die is opgeslagen op uw computer kan worden overgebracht naar het apparaat (importeren). U kunt de bestemmingen in het adresboek gemakkelijk kopiëren naar meerdere apparaten.* U kunt uitsluitend exporteren en importeren als u zich aanmeldt in de Systeembeheerder-modus.
Het apparaat beheren 4 Selecteer de instellingen die u wilt exporteren en geef het encryptiewachtwoord op. [Adresboek (ABK)] Schakel het selectievakje in om de adresboekgegevens als Canon-adresboekbestanden (*.abk) te exporteren. ● Als het selectievakje [Adresboek (ABK)] is ingeschakeld, kunt u de instellingen van het apparaat niet tegelijk exporteren met de adresboekgegevens. [Adresboek] Schakel het selectievakje in om de adresboekgegevens als informatiebestanden met instellingen van het apparaat (*.
Het apparaat beheren 1 2 Start de externe UI en meld u in de systeembeheerdersmodus aan. De UI op afstand starten(P. 424) Klik op [Instellingen/registratie] op de portaalpagina. Scherm van externe UI(P. 425) 3 Selecteer [Gegevensbeheer] 4 Geef het bestand op, voer het wachtwoord in en selecteer de te importeren [Importeren]. instellingen. [Bestandspad] Klik op [Bladeren] en selecteer het bestand. U kunt uitsluitend informatiebestanden met instellingen van het apparaat (*.
Het apparaat beheren ➠ Als het selectievakje [Instellingen/registratie] is ingeschakeld in stap 4, start het apparaat automatisch opnieuw op.
Het apparaat beheren De Firmware updaten 2U6C-088 Voor het bijwerken van de firmware selecteert u de updatemethode die past bij de installatievereisten van het apparaat. Er zijn twee manieren om de firmware bij te werken. De eerste manier is door de meeste recente versie van de firmware via het apparaat van internet te downloaden en de update uit te voeren als uw apparaat niet de laatste versie heeft.
Het apparaat beheren ● Zet het apparaat niet UIT wanneer het opnieuw starten plaatsvindt. Actualiseren vanaf een computer Als u de laatste firmwareversie hebt gedownload van de website van Canon, gebruik dan het hulpprogramma 'User Support Tool' (Gebruikershulpmiddel) om de firmware vanaf een computer bij te werken.
Het apparaat beheren Initialiseer instellingen 2U6C-089 U kunt de volgende instellingen herstellen (initialiseren): Menu Initialiseren(P. 452) Sleutel en certificaat initialiseren(P. 452) Het adresboek initialiseren(P. 453) Alle gegevens/instellingen initialiseren(P. 453) Menu Initialiseren U kunt de instellingen van het apparaat herstellen ( Overzicht van menuopties(P. 455) ). Afhankelijk van welke instellingen u selecteert, zult u misschien na het initialiseren het apparaat opnieuw moeten starten.
Het apparaat beheren
initialiseren> Het adresboek initialiseren U kunt de instellingen van het adresboek terugzetten op de standaardwaarden. Alle gegevens in het adresboek worden hierbij verwijderd.Overzicht van menuopties Overzicht van menuopties Overzicht van menuopties ....................................................................................................................... 455 .................................................................................................................................................... 456 ..........................................................................................................................
Overzicht van menuopties Overzicht van menuopties 2U6C-08A U kunt het apparaat aanpassen volgens de omgeving en vereisten, door de in dit hoofdstuk beschreven instellingen te configureren. Om de configuratie te starten, selecteert u
op het scherm Start ( Het scherm Start(P. 122) ). Dit gedeelte beschrijft wat ieder item in het instelmenu kan configureren. (P. 456) Dit gedeelte beschrijft het scherm en netwerkinstellingen. (P.Overzicht van menuopties 2U6C-08C Item (P. 457) Beschrijving Dit gedeelte beschrijft de instellingen voor het bekijken van het scherm. (P. 461) Dit gedeelte beschrijft de USB-toetsenbordinstellingen. (P. 462) Dit gedeelte beschrijft de timer- en energie-instellingen. (P. 467) Dit gedeelte beschrijft de netwerkinstellingen. (P.
Overzicht van menuopties 2U6C-08E Alle instellingen voor het bekijken van het scherm verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 457) (P. 457) (P. 458) (P. 459) (P. 459) (P. 459) (P. 460)
Overzicht van menuopties *1 *3 Kies deze optie om de taal te selecteren voor het bedieningspaneel, rapporten en lijsten.
Overzicht van menuopties *3 Hiermee selecteert u de taal voor de schermen van de UI op afstand. Selecteer een taal
Overzicht van menuopties Selecteer of Stel de display-timer in voor het bericht dat u meldt dat er nog maar weinig toner in de tonercartridges zit. in
Overzicht van menuopties 2U6C-08F Geef de indeling op van een USB-toetsenbord als dat op het apparaat is aangesloten. De standaardinstelling wordt aangegeven met een dolksymbool ( ).
Overzicht van menuopties 2U6C-08H Alle instellingen voor de tijdschakeling en energie verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 462) (P. 463) (P. 463) (P. 464) (P. 464) (P. 465) (P. 465) (P.
Overzicht van menuopties Geef de standaard datum en tijd op van de regio waar het apparaat is geïnstalleerd. Hiermee stelt u de tijdzone in. Als u de tijdzone wijzigt, worden de waarden bij automatisch aangepast. De datum en tijd instellen(P.
Overzicht van menuopties Selecteer de 12- of 24-uurs tijdnotatie. <12 uur (AM/PM)> <24 uur> Selecteer de weergave-instelling Als er gedurende een bepaalde tijd geen toets wordt ingedrukt op het bedieningspaneel, wordt er een zogenaamde automatische reset uitgevoerd en wordt het standaardscherm weergegeven. Geef het interval op waarop automatisch resetten wordt uitgevoerd.
Overzicht van menuopties Geef aan of na een automatische reset het standaardscherm moet worden weergegeven. Als is geselecteerd, wordt het hoofdscherm weergegeven van de functie die is geselecteerd bij ( (P. 457) ). Als is geselecteerd, wordt op het display het hoofdscherm weergegeven van de functie die geselecteerd is.
Overzicht van menuopties Als het apparaat gedurende een bepaalde periode niet is gebruikt of geen gegevens heeft verwerkt, wordt de slaapstand (sluimerstand) geactiveerd om energie te besparen. Geef de periode op waarna de automatische sluimertijd ingaat. De automatische sluimerstand wordt niet geactiveerd als het instellingenmenu wordt weergegeven. Gebruik de standaardinstellingen om zo veel mogelijk stroom te besparen. De slaapstand instellen(P. 177) 1 tot 60 (min.
Overzicht van menuopties 2U6C-08J Alle instellingen voor het netwerk verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 467) (P. 467) (P. 469) (P. 470) (P. 470) (P. 476) (P. 477) (P. 477) (P.
Overzicht van menuopties Draadloze LAN-routers die toegang hebben tot het apparaat, worden automatisch geladen en u kunt deze dus selecteren in de lijst. U moet handmatig een netwerksleutel invoeren, zoals een WEP-sleutel of een PSK. De verbinding instellen door een draadloze router te selecteren(P. 24) Selecteer deze optie om een draadloze verbinding te configureren door handmatig een SSID in te voeren.
Overzicht van menuopties Stel in of een directe verbinding moet worden gemaakt. Door deze functie in te schakelen, maakt u directe verbinding met het apparaat mogelijk, zelfs in een omgeving zonder toegangspunten of draadloze LAN-router. Direct verbinden (toegangspuntmodus)(P. 328) Geef op hoe lang het duurt voordat de verbinding automatisch wordt verbroken, nadat de directe verbinding is ingeschakeld.
Overzicht van menuopties Start de procedure voor Gemakkelijk verbinden via PC (cableless setup mode). U kunt Canon Laser NW Device Setup Utility gebruiken om netwerkinstellingen via een computer te configureren. verbindingsproces start Het ● Download Canon Laser NW Device Setup Utility van de Canon website (http://www.canon.com/).
Overzicht van menuopties Selecteer deze optie om te controleren of de machine via een netwerk is verbonden met een computer. netwerkverbinding testen(P.
Overzicht van menuopties Hiermee kunt u het stateful adres in- of uitschakelen dat wordt verkregen via DHCPv6. Selecteer, als DHCP is ingeschakeld, met deze instellingen of u het DNS-serveradres of de domeinnaam wilt ophalen met de optionele functies van DHCP. DNS configureren(P.
Overzicht van menuopties 0 tot en met 24 tot en met 48 (uur) 0 tot en met 24 tot en met 48 (uur) Hier kunt u instellingen opgeven om DNS-functies te gebruiken zonder DNS-servers.
Overzicht van menuopties LPD in- of uitschakelen. LPD is een afdrukprotocol dat op ieder hardwareplatform of in ieder besturingssysteem kan worden gebruikt. U kunt ook de tijdsperiode instellen die verloopt van ontvangst van gegevens totdat het Afdrukprotocollen afdrukken wordt geannuleerd, als ontvangst van afdrukgegevens wordt onderbroken. en WSD-functies configureren(P. 41) 1 tot en met 5 tot en met 60 (min.
Overzicht van menuopties Hiermee kunt u HTTP in- of uitschakelen. HTTP is een protocol dat vereist is voor communicatie met een computer, bijvoorbeeld wanneer u de UI op afstand gaat gebruiken of gaat afdrukken met WSD of Google Cloudprinter. HTTP-communicatie uitschakelen(P. 419) *1 Kies deze optie om aan te geven of u gecodeerde communicatie wilt gebruiken door een VPN (Virtual Private Network) tot stand te brengen via IPSec.
Overzicht van menuopties 1 t/m 161 t/m 65535 Selecteer de maximumgrootte van pakketten die de machine kan verzenden of ontvangen. verzendeenheid wijzigen(P. 54) De maximale <1300> <1400> <1500> Kies deze optie om de instellingen op te geven voor het bewaken en bedienen van de machine vanaf een computer met SNMP-compatibele software. De machine bewaken en bedienen met SNMP(P. 69) Hiermee kunt u SNMPv1 in- of uitschakelen.
Overzicht van menuopties
Selecteer of in Start het apparaat opnieuw op Geef op of de geavanceerde specificaties (RFC2790) van het protocol moeten worden bevestigd als de machinestatus moet worden bewaakt door SNMP-compatibele software. Selecteer of in Overzicht van menuopties ● Als is geselecteerd, kunt u in sommige gevallen een verbinding realiseren vanuit de apparaatbeheersoftware of stuurprogramma. Kies deze optie om de wachttijd in te stellen waarna verbinding wordt gemaakt met het netwerk. Selecteer de tijd afhankelijk van de netwerkomgeving. Een wachttijd instellen voor verbinding met een netwerk(P. 55) 0 tot en met 300 (sec.
Overzicht van menuopties
Start het apparaat opnieuw op Selecteer of Zonder goede beveiliging kunnen onbevoegden toegang krijgen tot computers en andere communicatieapparaten die op een netwerk zijn aangesloten. Om deze ongewenste toegang te voorkomen, kunt u instellingen opgeven voor het filteren van gegevenspakketten.Overzicht van menuopties Selecteer deze optie om instellingen in of uit te schakelen voor het filteren van pakketten die zijn verzonden naar of ontvangen van apparaten met opgegeven MAC-adressen. MAC-adressen opgeven voor firewallinstellingen(P.
Overzicht van menuopties
het apparaat opnieuw op Selecteer of Selecteer deze optie om de standaardwaarden van de netwerkinstellingen te herstellen. initialiseren>(P.Overzicht van menuopties 2U6C-08K Alle instellingen voor de USB verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Geef op of het gebruik van de USB-poort of een USB-geheugenapparaat moet worden in- of uitgeschakeld. Hiermee kunt u de USB-poort in- of uitschakelen waarmee de machine kan worden verbonden met een computer.
Overzicht van menuopties 2U6C-08L Alle instellingen voor toegang, zoals de schermkleuren omkeren en weergavetijd van meldingen, verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 483) (P. 483) (P. 483) Selecteer om de schermkleuren om te wisselen.
Overzicht van menuopties 2U6C-08R Item Beschrijving (P. 485) Dit gedeelte beschrijft hoe u de beeldkwaliteit voor het afdrukken instelt. (P. 494) Dit gedeelte beschrijft het gebruik van de reinigingsfuncties.
Overzicht van menuopties 2U6C-08S Alle instellingen voor de beeldkwaliteit verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 485) (P. 485) (P. 485) (P. 486) (P. 486) (P. 487) (P.
Overzicht van menuopties Selecteer of de kleur zwart of zwartachtige tekst in kleurdocumenten moeten worden gereproduceerd als echt zwart, of als een kleur die min of meer kort bij de kleur van het origineel ligt. Voor iedere optie kunt u de mate van effect instellen. U kunt afzonderlijke waarden opgeven voor de invoer en de glasplaat. Waarden aanpassen voor reproduceerbaarheid van tekstkleur(P.
Overzicht van menuopties -5.0 tot 0.0 tot + 5.0 (mm) -5.0 tot 0.0 tot + 5.0 (mm) -5.0 tot 0.0 tot + 5.0 (mm) -5.0 tot 0.0 tot + 5.0 (mm) * -5.0 tot 0.0 tot + 5.0 (mm) -5.0 tot 0.0 tot + 5.0 (mm) -5.0 tot 0.0 tot + 5.0 (mm) -5.0 tot 0.0 tot + 5.
Overzicht van menuopties Selecteer in de papierbron die moet worden ingesteld ● Als u kiest, kan de beeldkwaliteit veranderen als er een bepaalde tijd verstrijkt na het afdrukken op de voorzijde, of afhankelijk van de vochtigheidsgraad van de omgeving.
Overzicht van menuopties verwerking> ● Als u instelt op , kan de afdruksnelheid lager zijn. Bij dubbelzijdig afdrukken kunnen de vellen papier bij de uitvoer aan elkaar plakken. De instelling verlaagt de afdruksnelheid, teneinde plakken tegen te gaan.
Overzicht van menuopties
verwerking> Selecteer de modus ● Als is opgegeven, kan de afdrukdichtheid lager of ongelijk zijn als het apparaat wordt gebruikt in een omgeving met hoge vochtigheidsgraad. Als u na het afdrukken op kleinformaat papier, op groot formaat papier afdrukt, kunnen in witte gedeelten zogenaamde nabeelden verschijnen.Overzicht van menuopties Als afdrukken op vochtig papier kreukels hebben, of als er bij het afdrukken van afbeeldingen met halftonen (bijvoorbeeld foto´s) strepen verschijnenn in de voorrand van het papier, kunt u dit probleem misschien oplossen door te kiezen. verwerking> ● Als u instelt op , is de afdruksnelheid lager.
Overzicht van menuopties
Selecteer de modus ● Een sterker verbeterend effect instellen kan leiden tot lagere afdrukdichtheid of lagere afdruksnelheid. Het kan ook leiden tot minder scherpe randen en ruwere details. Er kunnen vlekken op kopieën verschijnen, afhankelijk van het papiertype of de omgevingscondities.Overzicht van menuopties ● Als strepen worden verwijderd, worden gedeelten met vlekken niet gescand. Reinig het originele scangebied, zodat het origineel naar tevredenheid wordt gescand.
Overzicht van menuopties 2U6C-08U De reinigingsfuncties worden opgesomd en toegelicht. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 494) (P. 494) (P. 494) Reinig de fixeereenheid nadat een tonercartridge is vervangen of als afdrukken zwarte strepen bevatten. fixeereenheid reinigen(P.
Overzicht van menuopties ● De instelling voor is niet beschikbaar als is ingesteld op .
Overzicht van menuopties 2U6C-08W Item Beschrijving (P. 497) Dit gedeelte beschrijft de instellingen die voor alle functies gelden. (P. 503) Dit gedeelte beschrijft hoe u de kopieerinstellingen opgeeft. (P. 505) Dit gedeelte beschrijft hoe u printerinstellingen opgeeft. (P. 531) Dit gedeelte beschrijft hoe u instellingen opgeeft voor het verzenden van faxen en gescande originelen. (P.
Overzicht van menuopties 2U6C-08X Alle items gerelateerd aan voor iedere functie algemene instellingen verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 497) (P. 500) (P. 501) (P. 502) Sterretjes (*) ● Instellingen gemarkeerd met "*1" worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties *1 *1 *1 / *1 *1 *1 *1 *1 *1 498
Overzicht van menuopties Geef deze instelling op wanneer u een document gaat afdrukken op papier met logo's. Als u bij algemeen gebruik, op papier met logo's gaat afdrukken, moet u voor enkelzijdig of dubbelzijdig afdrukken het papier in de papierbron anders laden. Als u de instelling echter wijzigt in , kunt u het papier voor zowel enkelzijdig als dubbelzijdig afdrukken met het logo naar beneden laden. Zie Voorbedrukt papier plaatsen(P.
Overzicht van menuopties Als u papier gebruikt waarop vooraf een logo is afgedrukt, moet u de afdrukzijde wijzigen als u enkelzijdig of dubbelzijdig afdrukt. ● U kunt het beste selecteren als het niet uitmaakt op welke zijde er wordt afgedrukt. Als u op een bepaalde zijde van het papier wilt afdrukken, hoeft u het papier in de papierbron niet om te draaien, ongeacht of enkelzijdig of dubbelzijdig afdrukken is geselecteerd.
Overzicht van menuopties 1 tot en met 5 offline> in> tot en met 60 (min.) in Voer de tijd in in Configureer de instellingen voor de bestandsgeneratie.
Overzicht van menuopties
(doorzoekbare tekst)> Selecteer of in *1 Bij het genereren van een gecodeerde PDF kan het PDF-codeerniveau worden ingesteld op '128-bit' of '256-bit'. Als '256-bit' is geselecteerd, kan de met Acrobat compatibele versie worden veranderd. Overzicht van menuopties 2U6C-08Y Alle instellingen voor het kopiëren verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). Sterretjes (*) ● Instellingen gemarkeerd met een asterix (*) worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items. U kunt de standaardinstellingen voor kopiëren wijzigen.
Overzicht van menuopties <1-zijdig->2-zijdig> <2-zijdig->2-zijdig> <2-zijdig->1-zijdig>
Overzicht van menuopties 2U6C-090 Alle instellingen voor de printer verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 505) (P. 529) Sterretjes (*) ● Instellingen gemarkeerd met "*1" worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties *1 *1 *1
Overzicht van menuopties Als het papierformaat dat is opgegeven in het printerstuurprogramma sterk verschilt met het geladen papier, verschijnt een foutmelding en wordt het afdrukken onderbroken. ● Als de instellingen in het printerstuurprogramma niet overeenkomen met formaat en type geladen papier met , kan het papier vastlopen of kan er een afdrukfout optreden. Geef hier het gewenste aantal kopieën op.
Overzicht van menuopties
negeren> of ● U kunt verschillende afdrukinstellingen opgeven, bijvoorbeeld het aantal exemplaren of enkelzijdig of dubbelzijdig afdrukken, vanaf een toepassing of het printerstuurprogramma. De instelling kan echter alleen op het apparaat worden opgegeven. U kunt instellingen in verband met de afdrukkwaliteit, veranderen.Overzicht van menuopties
Selecteer of Schakel de effeningsmodus waarin de randen van tekens en afbeeldingen vloeiend worden afgedrukt, in of uit. Selecteer of Geef de afdrukresolutie op voor het verwerken van de afdrukgegevens.Overzicht van menuopties Geef op dat u wilt inbinden over de lange papierzijde. Geef op dat u wilt inbinden over de korte papierzijde. Verschuif de afdrukpositie om de inbindmarge in te stellen die geldt voor de inbindrand zoals opgegeven via . De waarde '00,0' heeft geen effect op de inbindmarge.
Overzicht van menuopties Instelwaarde Lange zijde Korte zijde Bij ieder papiersoort kunt u voor alle afdruktaken de afdrukpositie verschuiven in stappen van 0,5 mm. -50,0 t/m 00,0 t/m +50,0 (mm) combinatie van instellingsrichting en afdrukzijde Geef de verschuivingswaarde op Selecteer de /
Overzicht van menuopties Het afdrukken stopt als er een bepaalde fout optreedt in de verwerking. Als u dit item echter instelt op , wordt die fout overgeslagen en kan het afdrukken voortgaan. Gewoonlijk moet u dit item instellen op .
Overzicht van menuopties
lade> of U kunt de instellingen veranderen die van kracht worden als u afdrukt vanaf UFR II printerstuurprogramma. U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit.Overzicht van menuopties Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen. vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen. Instelwaarde Produceert een afdruk met vloeiende gradatie of vloeiende randen. Geschikt voor het afdrukken van tekens en fijne lijnen. Produceert een scherpe afdruk met sterk contrast van licht en donker.
Overzicht van menuopties Selecteer of Geef het lettertype op dat u wilt gebruiken door het bijbehorende lettertype-ID-nummer. U kunt vanaf het bedieningspaneel een lijst afdrukken met voorbeelden van de beschikbare PCL-lettertypen. PCLlettertypelijst(P.
Overzicht van menuopties Kies deze optie om het aantal regels op te geven dat op een pagina moet worden afgedrukt (van 5 t/m 128). Deze instelling wordt automatisch aangepast aan de hand van de instellingen voor en .
Overzicht van menuopties
Selecteer de tekencode Kies deze optie om aan te geven of u een aangepast papierformaat wilt instellen. Selecteer om de afmetingen van het papier op te geven bij en .Overzicht van menuopties
dimensie> Geef de afmeting op Met deze optie kunt u instellen of er een Enter-teken (CR) moet worden toegevoegd wanneer de machine een teken voor een nieuwe regel (LF) ontvangt. Als is geselecteerd, wordt de afdrukpositie naar het begin van de volgende regel verplaatst wanneer de machine een LF-code ontvangt.Overzicht van menuopties Selecteer het type afbeelding Selecteer de reproductiemethode met halftonen Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen.
Overzicht van menuopties Vergeleken met produceert dit een fijnere afdruk, maar de kwaliteit is iets minder stabiel. Geschikt voor het afdrukken tekengegevens of CAD-gegevens met scherpe randen. *1 Met deze instelling kunt u streepjescodes afdrukken die worden ondersteund door de Barcode Printing Kit. Als wordt geselecteerd, zal het apparaat streepjescodes genereren wanneer het opdrachten voor streepjescodes ontvangt van een host-computer.
Overzicht van menuopties Geef de instellingen op voor PS-afdrukken, zoals paginalay-out en afdrukkwaliteit. Deze instelling biedt u de mogelijkheid op te geven hoeveel tijd verstrijkt tot een taak wordt geannuleerd. Als een taak niet wordt voltooid binnen de ingestelde tijdslimiet, wordt de taak automatisch geannuleerd. 0 t/m 3600 (sec.
Overzicht van menuopties
gradatie> Selecteer het type afbeelding vertegenwoordigt letters en tekens, vertegenwoordigt lijnen en figuren, en vertegenwoordigt foto´s en afbeeldingen.Overzicht van menuopties Drukt in zwart/wit af met nadruk op kleurverschillen, zodat een vloeiende gradatie wordt verkregen. Drukt zodanig in zwart/wit af dat de afbeelding eruit ziet als een zwart/wit televisieafbeelding (van het NTSCsysteem). Drukt zodanig in zwart/wit af dat R, G, en B uniform worden geconverteerd naar hetzelfde grijsniveau met behulp van slechts helderheid als de referentie.
Overzicht van menuopties
volgns papierformaat> of Geef op of u het afdrukbereik wilt vergroten tot het papierformaat.Overzicht van menuopties
afdrukken> of U kunt de afdrukmethode selecteren voor het reproduceren van halftonen (het tussenliggende bereik tussen de lichtere en donkere gebieden van een afbeelding) voor optimale beeldkwaliteit. Selecteer de reproductiemethode met halftonen.Overzicht van menuopties Instelwaarde Produceert een afdruk met vloeiende gradatie of vloeiende randen. Is geschikt voor het afdrukken van figuren of afbeeldingen die gradatiegebieden bevatten. Produceert een scherpe afdruk met sterk contrast van licht en donker. Is geschikt voor het afdrukken van fotogegevens zoals gegevens van fotoafbeeldingen. Produceert een afdruk met vloeiende gradatie of vloeiende randen. Geschikt voor het afdrukken van tekens en fijne lijnen.
Overzicht van menuopties gradatie> Selecteer het type afbeelding
Overzicht van menuopties Selecteer het type afbeelding Selecteer het type grijswaardenconversie Type afbeelding Selecteer het object waarvoor u de instelling wilt wijzigen.
Overzicht van menuopties
Selecteer of Geef op welke bewerking moet plaatsvinden als de beeldkwaliteit is afgenomen vanwege te weinig geheugen bij het afdrukken.Overzicht van menuopties Selecteer of Selecteer een paginabeschrijvingstaal Start het apparaat opnieuw op Hiermee wordt het apparaat gedetecteerd en verbonden als een faxapparaat. Hiermee wordt het apparaat gedetecteerd en verbonden als een UFR II printer.
Overzicht van menuopties 2U6C-091 Alle instellingen voor het verzenden van faxen en gescande originelen verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 531) (P. 532) (P. 537) Sterretjes (*) ● Instellingen gemarkeerd met "*1" worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties Geef op of het scherm om de bestemming te bevestigen moet worden weergegeven tijdens het verzenden van faxen, e-mails, of I-Faxen. Als is geselecteerd, verschijnt het Bestemmingen controleren bevestigingsscherm uitsluitend als meerdere bestemmingen zijn opgegeven. tijdens het verzenden van gegevens(P.
Overzicht van menuopties /// *1
Overzicht van menuopties Geef de basisinstellingen op voor het gebruik van het apparaat als I-Faxapparaat. U kunt de standaard instellingen veranderen voor het verzenden van I-Faxen. De geselecteerde instellingen worden gebruikt als de standaardinstellingen voor het scannen van originelen.
Overzicht van menuopties Zeven niveaus Informatie zoals de datum en de tijd van verzending en het e-mailadres van het apparaat (informatie van de verzender) kunnen als kopregel aan verzonden documenten worden toegevoegd. Deze informatie vertelt de ontvanger wanneer de I-Fax is verzonden en wie de afzender is.
Overzicht van menuopties /// *1
Overzicht van menuopties Zeven niveaus *1 Kies deze optie om de basisinstellingen op te geven voor de faxfunctie van de machine. U kunt de standaard instellingen veranderen voor het verzenden van faxen. De geselecteerde instellingen worden gebruikt als de standaardinstellingen voor het scannen van originelen.
Overzicht van menuopties ● ECM moet zijn ingeschakeld op de machine en het andere faxapparaat omdat er foutcontroles worden uitgevoerd op zowel het versturende als ontvangende apparaat. ● Zelfs als ECM is ingeschakeld, kunnen er fouten optreden als gevolg van de toestand van de telefoonlijn.
Overzicht van menuopties
Selecteer in Geef de instellingen op Geeft op hoe vaak het apparaat het nummer opnieuw moet kiezen. Voer een nummer in, en selecteer . Geeft het interval tussen het herhalen van het nummer. Voer een waarde in voor het interval, en selecteer .Overzicht van menuopties Als het lang duurt voordat het verzenden van een fax start, bijvoorbeeld vanwege een slechte verbinding, kunt u de startsnelheid voor de communicatie stapsgewijs verlagen.
Overzicht van menuopties *3 Behalve de bestemming die wordt opgegeven wanneer de fax wordt verzonden, kunt u opgeven of gefaxte documenten ook worden verstuurd naar een vooraf ingesteld adres waar ze worden opgeslagen en gearchiveerd. Een kopie van een verzonden origineel bewaren(P.
Overzicht van menuopties Kies deze optie om groepsverzending al dan niet toe te staan. Dit is een functie waarmee u achter elkaar faxen naar verschillende bestemmingen kunt sturen. Groepsverzending beperken(P. 414) Kies deze optie om instellingen op te geven voor het toevoegen van gegevens van de afzender aan de koptekst van faxen, zoals het faxnummer en de naam van de machine.
Overzicht van menuopties
aanp.> Selecteer of ● Als u deze functie instelt op , kan de communicatiesnelheid lager zijn. 543 Overzicht van menuopties 2U6C-092 Alle instellingen voor het ontvangen van faxen en e-mails verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 544) (P. 545) (P. 546) Sterretjes (*) ● Instellingen gemarkeerd met *1 worden misschien niet weergegeven, afhankelijk van het model dat u gebruikt, opties, of andere instel-items.
Overzicht van menuopties Als u faxberichten ontvangt wanneer de toner bijna op is, bewaart het apparaat de berichten in het geheugen en drukt ze niet af. Als deze functie echter is ingeschakeld, gaat het apparaat verder met afdrukken. Dit geldt ook voor de ontvangst van internetfaxberichten (I-Fax). instellingen>
Overzicht van menuopties
afdrukformaat> *1 Hiermee kunt u instellingen configureren voor het ontvangen en doorsturen van faxen. Kies deze optie om instellingen op te geven voor het dubbelzijdig afdrukken van ontvangen documenten.Overzicht van menuopties als de ontvangstmodus. Geef aan hoe vaak u een belsignaal wilt horen bij een binnenkomende fax. U kunt er ook voor kiezen geen belsignaal weer te geven.
Overzicht van menuopties 1 tot en met 15 tot en met 99 (sec.
Overzicht van menuopties
Selecteer in Geef ieder instel-item op Selecteer om het document te verkleinen met een percentage dat is gebaseerd op het formaat van het geladen papier. Selecteer <97%>, <95%>, <90%>, of <75%> om het document met dat percentage te verkleinen.Overzicht van menuopties Selecteer deze optie om in te stellen of faxen in het geheugen moeten worden opgeslagen als het doorsturen ervan is mislukt. U kunt de documenten dan later opnieuw verzenden of afdrukken. Documenten afdrukken, opnieuw verzenden of verwijderen waarvan het doorsturen is mislukt(P.
Overzicht van menuopties 2U6C-093 Alle instellingen voor het op een USB-geheugenapparaat opslaan van het gescande document, of het afdrukken van opgeslagen bestanden, verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 551) (P.
Overzicht van menuopties /// *
Overzicht van menuopties U kunt de instellingen veranderen om bestanden die zijn opgeslagen op een USB-geheugenapparaat af te drukken, en de methode om ze weer te geven. U kunt de standaardinstellingen voor het afdrukken uit geheugenmedia veranderen. De hier geconfigureerde instellingen worden gebruikt als de standaardinstellingen voor het afdrukken uit geheugenmedia.
Overzicht van menuopties < PDF-details instellen> <2 op 1> <4 op 1> <6 op 1> <8 op 1> <9 op 1> <16 op 1>
Overzicht van menuopties Selecteer de weergavemethode Geeft een voorbeeldafbeelding weer. Geeft bestandsnamen en datums weer in een lijst. Geef aan of u de bestanden op een USB-geheugenapparaat oplopend of aflopend wilt sorteren op bestandsnaam of datum.
Overzicht van menuopties Hiermee worden bestandsnamen weergegeven met maximaal acht tekens. Om een onderscheid te maken tussen bestanden met gelijksoortige namen, worden er nummers als '~1' of '~' toegevoegd aan het einde van de bestandsnamen. Hiermee worden bestandsnamen weergegeven met maximaal 40 tekens. ● Het aantal tekens hierboven is exclusief de tekens in bestandsextensies, zoals '.jpg'.
Overzicht van menuopties 2U6C-094 Geef op of Beveiligde afdruk is in- of uitgeschakeld ( Documenten beveiligd afdrukken(P. 267) ). Standaardinstellingen worden aangegeven met een dolksymbool ( ). 10 tot en met 30 tot en met 240 (min.
Overzicht van menuopties 2U6C-095 Alle instellingen voor het adresboek worden opgesomd en kort toegelicht. Kies deze optie om een pincode in te stellen die moet worden ingevoerd om nieuwe vermeldingen toe te voegen aan het adresboek of om bestaande vermeldingen te wijzigen. Gebruik van het adresboek beperken(P.
Overzicht van menuopties 2U6C-096 Item Beschrijving (P. 560) U kunt instellingen configureren om gebruikers van het apparaat te beheren. (P. 561) U kunt informatie beheren over de hardware en bewerkingen, maar ook verschillende vereiste data voor het gebruik van de apparaatfuncties. (P. 565) U kunt de instellingen configureren voor de externe UI en beschikbare software voor het apparaat. (P.
Overzicht van menuopties 2U6C-097 Alle instellingen voor het gebruikersbeheer van het apparaat verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 560) (P. 560) Geef de id of pincode uitsluitend in voor beheerders die toegangsmachtigingen hebben voor en .
Overzicht van menuopties 2U6C-098 Alle instellingen voor het beheer van het informatie voor de hardware en bewerkingen, maar ook over beheer van vereiste gegevens bij gebruik van apparaatfuncties verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 561) (P. 561) (P. 562) (P.
Overzicht van menuopties Selecteer een land of regio Geef aan of u de logboeken met informatie over
Overzicht van menuopties weergeven (RUI/Toner Status)> Selecteer en voorkom dat een knop wordt weergegeven in de externe UI, waarmee tonercartridges kunnen worden gekocht.
Overzicht van menuopties Selecteer of
Overzicht van menuopties 2U6C-099 Alle instellingen voor de software en het systeemopties voor het apparaat, maar ook over Licentie registreren verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 565) (P. 565) (P. 566) Sterretjes (*) ● Instellingen die zijn gemarkeerd met een sterretje (*) kunnen niet worden geïmporteerd of geëxporteerd.
Overzicht van menuopties Voer de pincode in Voer de pincode in (bevestigen) * Bepaal aan de hand van de omgeving waarin de machine wordt gebruikt hoe u de update van de firmware wilt installeren. De Firmware updaten(P.
Overzicht van menuopties 2U6C-09A De instellingen voor het benutten van de apparaatinstellingen en voor gegevensinitialisatie verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 567) (P. 568) (P. 568) (P. 568) (P.
Overzicht van menuopties Wanneer het importeren plaatsvindt ● Het apparaat start automatisch opnieuw op wanneer de importprocedure is beëindigd. Hiermee kunt u Product Extended Survey Program in- of uitschakelen (een programma voor het verzamelen van gebruiksgegevens van de machine).
Overzicht van menuopties 2U6C-09C Alle instellingen voor de authenticatiefunctie en versleuteling verschijnen in een lijst met korte toelichting. Standaardinstellingen worden aangegeven met een dolksymbool ( ). (P. 569) (P. 569) U kunt de beveiliging van de authenticatiefunctie versterken.
Overzicht van menuopties Selecteer in Selecteer of in
Onderhoud Onderhoud Onderhoud ......................................................................................................................................................... 572 Standaardreiniging ........................................................................................................................................... 574 De buitenzijde reinigen ................................................................................................................................
Onderhoud Onderhoud 2U6C-09E In dit hoofdstuk wordt het onderhoud van het apparaat beschreven, inclusief het reinigen van het apparaat en het instellen van de afdrukkwaliteit. ◼ Standaardreiniging Standaardreiniging(P. 574) ◼ Verbruiksartikelen vervangen De tonercassette vervangen(P. 581) De resterende hoeveelheid verbruiksartikelen controleren(P. 584) Verbruiksartikelen(P.
Onderhoud ◼ Het apparaat instellen en beheren De machine verplaatsen(P. 585) Beeldkwaliteit aanpassen(P. 587) Aantal afdrukken weergeven(P. 595) Rapporten en lijsten afdrukken(P.
Onderhoud Standaardreiniging 2U6C-09F Maak de machine regelmatig schoon om te voorkomen dat de afdrukkwaliteit afneemt en om de machine veilig en prettig te kunnen gebruiken. Onderdelen die u moet reinigen Behuizing van het apparaat en de ventilatieopeningen De buitenzijde reinigen(P. 575) Documentinvoer The documentinvoer reinigen(P. 577) Interne fixeereenheid De fixeereenheid reinigen(P. 580) Glasplaat en de onderzijde van de invoer De glasplaat reinigen(P.
Onderhoud De buitenzijde reinigen 2U6C-09H Wrijf de behuizing van het apparaat regelmatig schoon, vooral bij de ventilatieopeningen, om het apparaat in goede conditie te houden. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. ● Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd.
Onderhoud De glasplaat reinigen 2U6C-09J Verwijder regelmatig stof van de glasplaat en de onderzijde van de invoer om vlekken op originelen of afdrukken te voorkomen. 1 Schakel de machine uit en haal de stekker uit het stopcontact voordat u begint met schoonmaken. ● Wanneer u de printer uitschakelt, worden afdrukgegevens in de wachtrij gewist.
Onderhoud The documentinvoer reinigen 2U6C-09K Grafietpoeder of stof op de rollen in de invoer of op het scangebied van de documentinvoer kan vlekken geven op de afdrukken. Als dit zich voordoet, of als er veel papierstoringen zijn, maak dan de documentinvoer schoon. Als de problemen blijven bestaan nadat u de invoer hebt schoongemaakt, start dan het automatisch reinigen van de documentinvoer. The documentinvoer reinigen(P. 577) Automatische reiniging van de documentinvoer(P.
Onderhoud ● Als de rollen en omgeving erg vuil zijn, maak ze dan schoon. Hiertoe maakt u een doek nat met water en wringt u hem goed uit, en veegt dan de vuile gebieden schoon. Wrijf de gebieden vervolgens droog met een zachte, droge doek. 5 Sluit de invoerdeksel en originele toevoerlade. 6 Open de documentinvoer. 7 Veeg het scangebied documentinvoer schoon. ● Veeg het schoon met een doek die vochtig is gemaakt met water en is uitgewrongen. Veeg het vervolgens droog met een droge doek.
Onderhoud 9 10 Sluit de documentinvoer voorzichtig. Steek de stekker van het apparaat weer in het stopcontact en schakel het apparaat in. Automatische reiniging van de documentinvoer Automatische reiniging van de documentinvoer vereist papier in the documentinvoer. Plaats 10 vellen normaal papier van het formaat A4 of US Letter in the documentinvoer voordat u automatische reiniging start. Originelen plaatsen(P. 135) 1 Selecteer
in het scherm Start.Onderhoud De fixeereenheid reinigen 2U6C-09L Er kan zich vuil verzamelen op de fixeermodule in het apparaat, met als gevolg zwarte strepen op de afdrukken. Voer de onderstaande procedure uit om de fixeermodule te reinigen. U kunt de fixeermodule niet reinigen als het apparaat documenten in de wachtrij heeft staan die nog moeten worden afgedrukt. U hebt normaal papier van A4-of Letterformaat nodig om de fixeermodule te reinigen.
Onderhoud De tonercassette vervangen 2U6C-09S Het apparaat geeft een melding weer wanneer er nog maar weinig toner in de tonercartridge zit. Let op: de afdrukkwaliteit kan verslechteren, als u doorgaat met afdrukken zonder dit op te lossen. Op de display kunt u zien hoeveel toner er nog in de tonercartridges zit ( De resterende hoeveelheid verbruiksartikelen controleren(P. 584) ). Er wordt een bericht weergegeven(P. 581) Als afdrukken van slechte kwaliteit zijn(P.
Onderhoud Als afdrukken van slechte kwaliteit zijn Als uw afdrukken één van de onderstaande kenmerken gaan vertonen, raakt één van uw tonercartridges leeg. Vervang de bijna lege tonercartridge ook als er geen bericht wordt weergegeven. Procedure voor het vervangen van de tonercartridge(P.
Onderhoud 3 4 5 Haal de nieuwe tonercartridge uit de beschermende verpakking. Schud de tonercartridge 5 of 6 keer (zie onderstaande afbeelding) om de toner binnenin de cartridge gelijkmatig te verdelen. Installeer de tonercartridge. ● Duw hem helemaal terug tot hij niet meer verder kan. 6 Sluit de voorklep. KOPPELINGEN Verbruiksartikelen(P.
Onderhoud De resterende hoeveelheid verbruiksartikelen controleren 2U6C-09U Met onderstaande procedure kunt u controleren hoeveel toner er nog in de tonercartridges zit. Het is vooral belangrijk dat u controleert of u een nieuwe tonercartridge gereed moet hebben, voordat u met een grote afdruktaak begint.
Onderhoud De machine verplaatsen 2U6C-09W Het apparaat is zwaar. Volg altijd de onderstaande procedure als u het apparaat gaat verplaatsen, om lichamelijk letsel te voorkomen. 1 Schakel het apparaat en de computer uit. ● Als u het apparaat uitschakelt, worden gegevens in de wachtrij verwijderd. Faxen die zijn ontvangen met de functie Geheugenontvangst, faxen die wachten op verzending en rapporten die na het verzenden en ontvangen van faxen automatisch worden afgedrukt, worden niet verwijderd.
Onderhoud ● Pak het apparaat vast bij deze handgrepen en til hem op. Als de optionele paper feeder is op het apparaat is geplaatst ● Ontgrendel de paper feeder voordat u het apparaat optilt, en transporteer de paper feeder afzonderlijk. Voorzijde 6 Achterzijde Zet het apparaat voorzichtig neer op de nieuwe gebruikslocatie. ● Zie 'Aan de slag' voor informatie over het installeren van het apparaat nadat u dit hebt verplaatst. Handleidingen en hun inhoud(P.
Onderhoud Beeldkwaliteit aanpassen 2U6C-09X Als de afdrukresultaten of gescande afbeeldingen te wensen overlaten, zoals een lage beeldkwaliteit, slechte reproduceerbaarheid of scheve afdrukken, probeer dan onderstaande correcties. ◼ Kopie-afbeelding aanpassen Als de dichtheid of helderheid van kopieën en drukwerk uit geheugenmedia duidelijk afwijken van de originelen, kunt u met behulp van deze functie ervoor zorgen dat de afdrukresultaten beter overeenkomen met de originelen.
Onderhoud De gradatie en dichtheid voor kopieeropdrachten aanpassen 2U6C-09Y Gradatie verwijst naar de overgang van donker naar licht van de tinten van een kleur. Hoe meer tinten in de gradaties van kleuren die worden afgedrukt, des te natuurlijker de afdrukken. Als de reproduceerbaarheid van kleuren slecht is en de dichtheid en helderheid van afdrukken duidelijk afwijken van de originelen, kunt u een automatische aanpassing of correctie uitvoeren.
Onderhoud 8 Sluit de documentinvoer voorzichtig. 9 Selecteer . ➠ De correctieafbeelding wordt gescand en de correctie begint. 10 11 Als een bericht verschijnt dat aangeeft dat de aanpassing is voltooid, opent u de documentinvoer, en verwijdert u de correctieafbeelding. Sluit de documentinvoer voorzichtig. Als het bericht
Onderhoud Waarden aanpassen voor reproduceerbaarheid van tekstkleur 2U6C-0A0 U kunt een instelling realiseren zodat zwarte of bijna-zwarte tekst wordt gereproduceerd in een kleur die kort bij het in kleur gescande origineel ligt. ● Deze functie is bruikbaar als scannen wordt verricht terwijl een andere instelling heeft dan . Beeldkwaliteit aanpassen(P. 304) 1 Selecteer in het scherm Start.
Onderhoud 5 Selecteer .
Onderhoud De afdrukdichtheid aanpassen 2U6C-0A1 Als de afdrukresultaten te donker of te licht zijn, kunt u de dichtheid aanpassen. 1 Selecteer
in het scherm Start. 2 Selecteer 3 Selecteer . 4 Stel de dichtheid in. 5 Selecteer . Het scherm Start(P. 122) .Onderhoud De afdrukpositie aanpassen 2U6C-0A2 Als het document excentrisch of buiten het afdrukbereik wordt afgedrukt, moet u de afdrukpositie aanpassen. U kunt de afdrukpositie voor iedere papierbron aanpassen: in het bereik -5,0 mm tot +5,0 mm in stappen van 0,1 mm. De aan te passen richting en afstand controleren Als u de afdrukpositie aanpast, geef dan de richting op met '+' en '-' en de afstand met behulp van 'mm'. Voor /
Onderhoud 6 Stel een aanpassingswaarde in. 7 Selecteer . De afdrukpositie aanpassen voor alle afdruktaken ● U kunt in het instellingenmenu van het bedieningspaneel gebruiken om de afdrukposities voor alle afdruktaken aan te passen, ongeacht de papierbron. U kunt de afdrukpositie in stappen van 0,5 mm instellen in het bereik -50,0 mm tot +50,0 mm. (P.
Onderhoud Aantal afdrukken weergeven 2U6C-0A3 U kunt het totale aantal pagina's die door het apparaat zijn afgedrukt controleren Deze totalen omvatten faxen, rapporten en lijsten, plus kopieën en afdrukken van gegevens vanaf computers. Controleer het aantal afgedrukte pagina's <113: Totaal (Zwart-wit/klein)> Toont het totaalaantal pagina's dat in zwart-wit is gekopieerd en afgedrukt. <501: Scan (Totaal 1)> Toont het totaalaantal gescande pagina's.
Onderhoud Rapporten en lijsten afdrukken 2U6C-0A4 U kunt rapporten en lijsten afdrukken om informatie te controleren zoals het totale afdrukvolume voor alle en apparaatinstellingen. De afdrukinstellingen voor rapporten en lijsten configureren(P. 596) Een rapport afdrukken van het totaale afdrukvolume per afdelings-ID(P. 596) Instelrapporten over de communicatieresultaten(P. 596) Instellijsten afdrukken(P. 598) Rapporten en lijsten afdrukken over de verbruikstatus van het apparaat(P.
Onderhoud ● Rapporten die zijn afgedrukt voor een e-mail / I-fax duiden op een verzendresultaat tussen het apparaat en de mailserver, niet tussen het apparaat en de bestemming. Communicatiebeheerrapport U kunt de fax- en e-maillogboeken van verzonden en ontvangen documenten controleren door een communicatiebeheerrapport af te drukken. U kunt dit rapport automatisch afdrukken na elke 40 transmissies of handmatig.
Onderhoud Wanneer u selecteert, kunt u een deel van een verzonden document opnemen in het TXresultaatrapport. TX-resultaatrapport e-mail/I-fax/bestand U kunt een TX-resultaatrapport voor e-mail / I-Fax / bestand afdrukken en de I-Fax- of e-maillogboeken controleren van verzonden documenten en van documenten die in een gedeelde map of een FTP-server zijn opgeslagen. U kunt het rapport afdrukken na elke transmissie of alleen wanneer er een verzendfout optreedt.
Onderhoud Lijst gebruikersgegevens/Gegevenslijst systeembeheer U kunt de lijst met instellingen ( Overzicht van menuopties(P. 455) ) en de inhoud die op het apparaat is opgeslagen, controleren door een lijst met gebruikersdata of een lijst met systeembeheerdersdats af te drukken. Beide lijsten vermelden de firmwareversie het formaat en type papier dat op het apparaat is geregistreerd, plus de afdrukinstellingen van het communicatiebeheerrapport, TX-resultaatrapport, en RXresultaatrapport.
Onderhoud ● Het stroomverbruik kan verschillen, afhankelijk van de omgeving en de condities waaronder de machine wordt gebruikt. Statusrapport verbruiksart. Met een rapport kunt u de status controleren van de verbruiksartikelen die in het apparaat zijn geïnstalleerd.
Onderhoud Verbruiksartikelen 2U6C-0A5 Hier volgt een richtsnoer voor de geschatte levensduur van de verbruiksartikelen die in dit apparaat worden gebruikt. Schaf verbruiksartikelen aan bij uw plaatselijke, erkende Canon-dealer. Neem voorzorgsmaatregelen voor gezondheid en veiligheid in acht wanneer u verbruiksartikelen opslaat en hanteert. Voor een optimale printkwaliteit worden originele toner, tonercartridges en onderdelen van Canon aanbevolen.
Onderhoud verbruik van tonercartridges voor monochromatische elektrofotografische printers en multifunctionele toestellen die printeronderdelen bevatten) bij het afdrukken op papier van A4-formaat met de standaardinstelling voor afdrukdichtheid. Wees voorzichtig met namaaktonercartridges ● Wees erop bedacht dat er Canon-namaaktonercartridges in omloop zijn. Het gebruik van namaaktonercartridges kan leiden tot een slechte afdrukkwaliteit of slechte machineprestaties.
Problemen oplossen Problemen oplossen Problemen oplossen ..................................................................................................................................... 604 Veelvoorkomende problemen .......................................................................................................................... 606 Installatie-/instellingenproblemen ...............................................................................................................
Problemen oplossen Problemen oplossen 2U6C-0A6 1660-0AE Als er een probleem optreedt, raadpleegt u dit hoofdstuk om oplossingen te zoeken voordat u contact opneemt met Canon. ◼ Veelvoorkomende problemen Dit gedeelte beschrijft hoe u actie onderneemt als u vermoedt dat het apparaat niet goed werkt. problemen(P.
Problemen oplossen ◼ Als een probleem niet kan worden opgelost Als een probleem blijft optreden, leest u contactgegevens. Als een probleem niet kan worden opgelost(P.
Problemen oplossen Veelvoorkomende problemen 2U6C-0A7 Als er problemen ontstaan tijdens het gebruiken van de machine, controleer dan de tips in dit gedeelte voordat u contact met ons opneemt. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canon-helpdesk.
Problemen oplossen Installatie-/instellingenproblemen 2U6C-0A8 Zie ook Veelvoorkomende problemen(P. 606) . Probleem met de draadloos/bedraad LAN verbinding(P. 607) Probleem met de USB-verbinding(P. 610) Probleem met de printserver(P. 610) Probleem met de draadloos/bedraad LAN verbinding Het draadloos LAN en bekabeld LAN kunnen niet tegelijkertijd worden gebruikt. ● Het draadloos LAN en bekabeld LAN kunnen niet tegelijkertijd worden gebruikt.
Problemen oplossen U weet niet zeker welk IP-adres is ingesteld. Netwerkinstellingen weergeven(P. 38) U kunt niet afwisselend de verbindingsmethode bekabeld LAN en draadloos LAN gebruiken. ● Hebt u op het bedieningspaneel van het apparaat ook gekozen voor Bekabeld LAN of Draadloos LAN? Dat is noodzakelijk om het apparaat te laten overschakelen naar uw selectie. Bedraad LAN of Draadloos LAN selecteren(P.
Problemen oplossen Als het apparaat geen verbinding kan maken met het draadloos LAN Controleer de status van uw computer. ● Zijn de instellingen van de computer en de draadloze router voltooid? ● Zijn de kabels van de draadloze router (inclusief het netsnoer en de LAN-kabel) goed aangesloten? ● Is de draadloze router ingeschakeld? Als het probleem zich blijft voordoen zelfs nadat u de bovenstaande items hebt gecontroleerd: ● Schakel de apparaten uit en schakel ze vervolgens opnieuw in.
Problemen oplossen ● ELKE verbindingsweigering* wordt geactiveerd. ● De WEP-sleutel die automatisch is gegenereerd (hexadecimaal) wordt geselecteerd. ● De stealth-modus wordt geactiveerd. * Een functie waarbij de draadloze router de verbinding weigert als de SSID op het apparaat dat moet worden aangesloten, is ingesteld op "ELKE" of leeg is.
Problemen oplossen Problemen bij het kopiëren / afdrukken 2U6C-0A9 Zie ook Veelvoorkomende problemen(P. 606) . Het kopieer-/afdrukresultaat is niet naar tevredenheid. Het papier is gekreukeld of gekruld. Als u niet goed kunt afdrukken(P. 616) U kunt niet afdrukken. ● Kunt u een Windows testpagina afdrukken? Als u een Windows testpagina kunt afdrukken, is er geen probleem met het apparaat of het printerstuurprogramma. Controleer de afdrukinstellingen van uw toepassing.
Problemen oplossen Stuurprogramma´s installeren(P. 78) ● Kunt u afdrukken vanaf andere computers op het netwerk? Als u ook niet kunt afdrukken vanaf andere computers, neemt u contact op met de dichtstbijzijnde Canon-dealer of met de Canon-helpdesk. Bedraad LAN-verbinding ● Hebt u de juiste poort geselecteerd? Als er geen poort kan worden gebruikt, maak dan een poort. De printerpoort controleren(P. 721) Printerpoorten configureren(P.
Problemen oplossen Het afdrukken gaat langzaam. * ● Schakel Beveiligd afdrukken uit als u deze functie niet gebruikt. De periode instellen waarna beveiligde documenten worden verwijderd(P. 269) * Als het geheugen bijna vol is, wordt de machine trager, net zoals bij een computer. Er is dus geen sprake van een foutsituatie. U kunt niet afdrukken met Google Cloudprinter. Google Cloudprinter gebruiken(P. 347) Het duurt een tijd voordat het afdrukken start.
Problemen oplossen Problemen bij het faxen of met de telefoon 2U6C-0AA Zie ook Veelvoorkomende problemen(P. 606) . Problemen bij het verzenden(P. 614) Problemen bij het ontvangen(P. 615) Problemen bij het verzenden Het lukt niet een fax te verzenden. ● Is de externe telefoonlijn bezet? Wacht tot de lijn vrij is. ● Is er een fout opgetreden? Druk het communicatiebeheerrapport af en bekijk de inhoud. Communicatiebeheerrapport(P. 597) ● Is de telefoonlijn goed ingesteld? De telefoonlijn aansluiten(P.
Problemen oplossen Problemen bij het ontvangen De resultaten van een ontvangen fax zijn niet naar tevredenheid. Het papier is gekreukeld of gekruld. Als u niet goed kunt afdrukken(P. 616) Er kan niet automatisch worden geschakeld tussen de telefoon en de fax. ● Controleer of de ontvangstmodus is ingesteld op , , of . Faxen ontvangen(P. 226) ● Misschien is er nog weinig ruimte in het geheugen beschikbaar.
Problemen oplossen Als u niet goed kunt afdrukken 2U6C-0AC Probeer de volgende oplossingen als het afdrukresultaat te wensen overlaat, of als het papier gekreukeld is of omkrult. Als u een probleem niet zelf kunt oplossen, neem dan contact op met uw Canon-dealer of met de Canonhelpdesk. ◼ Problemen met de beeldkwaliteit Vlekken aan de onderzijde van afdrukken(P. 618) Vlekken en spetters(P. 621) Er verschijnen strepen / het afdrukken is ongelijk(P. 624) Het afdrukresultaat is niet goed(P.
Problemen oplossen Er verschijnen zwarte vlekken(P. 627) Achterzijde van het papier is vlekkerig(P. 627) ◼ Problemen met het printpapier Het papier kreukelt(P. 629) Het papier krult om of is gekreukeld(P. 629) Het papier krult(P. 630) ◼ Problemen met de papiertoevoer Afdrukken zijn scheef(P. 631) De afgedrukte streepjescode kan niet worden gelezen(P. 628) Papier is onjuist ingevoerd(P. 631) Papier wordt niet ingevoerd of er worden twee of meer vellen tegelijk ingevoerd(P.
Problemen oplossen Het afdrukresultaat is niet goed 2U6C-0AE Als het apparaat van binnen vies is, kan dit gevolgen hebben voor het afdrukresultaat. Reinig het apparaat zorgvuldig. Standaardreiniging(P. 574) Vlekken aan de onderzijde van afdrukken Gebruikt u geschikt papier? ● Controleer de ondersteunde papiertypes en druk af met geschikt papier. Geef ook de instellingen voor het formaat en type papier goed op. Geschikt papier(P. 689) Papier laden(P. 139) Het type en formaat papier opgeven(P.
Problemen oplossen Verschijnen er vlekken als u het apparaat gebruikt in een omgeving met lage vochtigheid? ● Verander de instelling voor . Het verbeterende effect is sterker met dan met . Probeer eerst met . (P. 489) ● Als is opgegeven, kan de afdrukdichtheid lager of ongelijk zijn als het apparaat wordt gebruikt in een omgeving met hoge vochtigheidsgraad.
Problemen oplossen ● Een sterker verbeterend effect instellen kan leiden tot lagere afdrukdichtheid. Lege gebieden bevatten zogenaamde nabeelden Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 689) Papier laden(P. 139) Als u na het afdrukken op kleinformaat papier, op groot formaat papier afdrukt, verschijnen er dan zogenaamde nabeelden? ● Verander de instelling van .
Problemen oplossen Vlekken en spetters Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 689) Papier laden(P. 139) Verschijnen er tonervlekken en spetters als u het apparaat gebruikt in een omgeving met lage vochtigheid? ● Verander de instelling voor . Het verbeterende effect is sterker met dan met . Probeer eerst met . (P.
Problemen oplossen Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geef ook de instellingen voor het formaat en type papier goed op. Geschikt papier(P. 689) Papier laden(P. 139) Het type en formaat papier opgeven(P.
Problemen oplossen Een deel van de pagina wordt niet afgedrukt Drukt u gegevens af zonder marges? ● Dit symptoom doet zich voor als een marge is ingesteld op Geen in het printerstuurprogramma. Marges van 5 mm of minder rond de rand van het papier of 10 mm of minder rond de rand van enveloppen vallen buiten het bedrukbare gebied van het apparaat. Zorg ervoor dat de marges rond het document groot genoeg zijn.
Problemen oplossen Er verschijnen strepen / het afdrukken is ongelijk Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 689) Papier laden(P. 139) Is de glasplaat verontreinigd? ● Reinig de glasplaat en de onderzijde van de documentinvoer. De glasplaat reinigen(P. 576) Hebt u de fixeereenheid gereinigd? ● Reinig de fixeereenheid. De fixeereenheid reinigen(P.
Problemen oplossen ● Als u instelt op , is de afdruksnelheid lager. Is de tonercartridge bijna leeg? ● Controleer hoeveel toner er nog in de tonercartridges zit en vervang zo nodig de tonercartridges. ● Onafhankelijk van het weergegeven tonerniveau kan de tonercartridge het einde van zijn levensduur hebben bereikt, tengevolge van de omgevingscondities en de versleten materialen in de cartridge. Vervang de tonercartridge. De tonercassette vervangen(P.
Problemen oplossen Er verschijnen witte vlekken Gebruikt u papier dat vocht heeft opgenomen? ● Gebruik nieuw papier dat helemaal droog is. Papier laden(P. 139) Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geschikt papier(P. 689) Papier laden(P. 139) Verschijnt er een witte vlek in het midden van donkere tekst of lijnen? ● Verander de instelling van . Instellen op kan het probleem misschien oplossen.
Problemen oplossen Gebruikt u het apparaat in een omgeving met hoge vochtigheid? ● Verander de instelling van . Instellen op kan het probleem misschien oplossen. (P. 489) ● Als u instelt op , kan de afdrukdichtheid variëren, afhankelijk van de luchtvochtigheid. Is de tonercartridge bijna leeg? ● Controleer hoeveel toner er nog in de tonercartridges zit en vervang zo nodig de tonercartridges.
Problemen oplossen Hebt u de fixeereenheid gereinigd? ● Reinig de fixeereenheid. De fixeereenheid reinigen(P. 580) De afgedrukte streepjescode kan niet worden gelezen Gebruikt u een kleine streepjescode of een streepjescode met dikke lijnen? ● Vergroot de streepjescode. ● Als de streepjes van de streepjescode haaks op de uitvoerrichting van het papier staan, draai de afbeelding dan 90 graden om ervoor te zorgen dat de streepjes parallel aan de uitvoerrichting van het papier liggen.
Problemen oplossen Het papier krult om of is gekreukeld 2U6C-0AF Het papier kreukelt Is het papier goed geplaatst? ● Als de stapel papier hoger is dan de markering voor het maximale aantal vellen of schuin in de lade ligt, kunnen er kreukels of vouwen ontstaan. Papier laden(P. 139) Gebruikt u papier dat vochtig is geweest? ● Vervang de stapel door probleemloos papier. Papier laden(P.
Problemen oplossen Het papier krult Gebruikt u geschikt papier? ● Controleer het papier dat u kunt gebruiken en druk af met geschikt papier. Geef ook de instellingen voor het formaat en type papier goed op. Geschikt papier(P. 689) Papier laden(P. 139) Het type en formaat papier opgeven(P. 157) ● Verander de instelling van . Instellen op kan het probleem misschien oplossen. (P. 488) ● Als u instelt op , kan de afdruksnelheid lager zijn.
Problemen oplossen Papier is onjuist ingevoerd 2U6C-0AH Afdrukken zijn scheef Zijn de papiergeleiders afgesteld op de randen van het papier? ● Als de papiergeleiders te los of te strak zitten, zijn de afdrukken scheef. Papier laden(P. 139) Papier wordt niet ingevoerd of er worden twee of meer vellen tegelijk ingevoerd Is het papier goed geplaatst? ● Waaier de papierstapel goed uit, zodat de vellen niet aan elkaar blijven plakken. ● Controleer of het papier goed is geplaatst. Papier laden(P.
Problemen oplossen Er verschijnt een melding of een nummer dat begint met '#' (een foutcode) 2U6C-0AJ Als er een schermbericht op het apparaat verschijnt, of een nummer (foutcode) voorafgegaan door '#', raadpleegt u de volgende gedeeltes voor een oplossing. Maatregelen bij ieder bericht(P. 633) Maatregelen bij iedere foutcode(P.
Problemen oplossen Maatregelen bij ieder bericht 2U6C-0AK Als u geen fax kunt verzenden, het geheugen vol is of als er bedieningsproblemen zijn, verschijnt er een bericht op het scherm. In de volgende lijst worden deze foutberichten toegelicht. Er wordt mogelijk een namaak- of niet-Canon-cartridge gebruikt. Hoeveelheid inkt in cartridge kan niet goed worden weergegeven. De tonercartridge die u gebruikt, is misschien niet een origineel Canon-product.
Problemen oplossen De verbinding instellen met behulp van de WPS Drukknop-modus(P. 20) De verbinding instellen met behulp van de WPS-pincodemodus(P. 22) Er is handmatig een SSID of netwerksleutel van een draadloze router ingevoerd, maar de invoer is onjuist. ● Controleer de SSID en de netwerksleutel en voer de juiste waarden nogmaals in. De SSID en de netwerksleutel controleren(P. 30) De verbinding instellen door gedetailleerde instellingen op te geven(P.
Problemen oplossen ● Als u meerdere bestemmingen wilt opgeven, moet u instellen op . Neem voor meer informatie contact op met uw beheerder. Groepsverzending beperken(P. 414) Kan geen groepsbestemmingen of meerdere bestemmingen tegelijk opgeven. U hebt meerdere bestemmingen of groepskiezen gekozen terwijl de hoorn van de haak is. ● U hebt meerdere bestemmingen of groepskiezen gekozen terwijl de hoorn van de haak is.
Problemen oplossen Controleer de authenticatie-instellingen. De verificatiemethode die is ingesteld op het apparaat komt niet overeen met de verificatiemethode die is ingesteld op de RADIUS-server. ● Controleer dat op dit apparaat en op de RADIUS-server dezelfde authenticatiemethode is ingesteld, en stel de juiste authenticatiemethode in. IEEE 802.1X-verificatie-instellingen configureren(P. 403) Kopiëren is beperkt. Kopiëren is uitgeschakeld in Afdelings-ID beheer.
Problemen oplossen Kan niet verbinden. Het maximumaantal apparaten dat verbinding kan maken met het toegangspunt is bereikt. Het apparaat heeft geprobeerd verbinding te maken met een draadloze LAN-router waarop het maximale aantal toestellen al was aangesloten. ● Verminder het aantal toestellen (clients) dat op de draadloze LAN-router is aangesloten.
Problemen oplossen Stel het apparaat in met behulp van een andere verbindingsmethode. Verbinding maken met een draadloos LAN(P. 18) Kan geen verbindingen van draadloze apparaten detecteren. Binnen de vooraf vastgelegde tijdsduur kon geen mobiel apparaat worden waargenomen. ● Maak opnieuw verbinding en houd hierbij rekening met de tijdslimiet. Direct verbinden (toegangspuntmodus)(P. 328) Kan geen reiniging uitvoeren. Er is papier vastgelopen tijdens het reinigen.
Problemen oplossen Kan open systeem-authenticatie niet uitvoeren. Controleer de WEPinstellingen. De verificatiemethode van de machine is ingesteld op , maar die van een draadloze router op “Gedeelde sleutel”. ● Maak opnieuw verbinding door de WEP-verificatiemethode handmatig te wijzigen in . De verbinding instellen door gedetailleerde instellingen op te geven(P. 27) Het MAC-adres van het apparaat is geweigerd omdat het MAC-adresfilter is ingesteld op een draadloze router.
Problemen oplossen Eenvoudige verbinding via pc beëindigd wegens time-out. Het apparaat wordt opnieuw opgestart. Vanaf de start van de procedure voor Eenvoudige verbinding via pc (cableless setup mode) zijn 30 minuten verstreken, maar de pc kan nog steeds niet worden verbonden. ● Start de machine opnieuw op en verricht nogmaals. (P. 470) Einde gebruiksduur cartridge. De tonercartridge heeft het einde van de gebruiksduur bereikt.
Problemen oplossen Plaats papier. Er is geen papier geplaatst in de papierlade of in de multifunctionele lade. ● Hier plaatst u het papier. Papier laden(P. 139) Er is geen papier geladen waarop rapporten of lijsten kunnen worden afgedrukt. ● Laad het juiste papier voor het afdrukken van rapporten of lijsten, en realiseer instellingen voor papierformaat en papiersoort. Papier laden(P. 139) Het type en formaat papier opgeven(P. 157) Geschikt papier(P.
Problemen oplossen Geen antwoord van de bestemming. Er kan een LAN-kabel zijn losgeraakt, of er kan iets mis zijn in een schakelaar. ● Controleer de status van de LAN-kabels en schakelaars. Geen respons van de host. Het apparaat is niet op de juiste manier verbonden met een netwerk. ● Controleer de instellingen van de machine en het netwerk, en maak opnieuw verbinding. De netwerkomgeving instellen(P. 14) Papier vastgelopen. Er is papier vastgelopen.
Problemen oplossen ● Zorg ervoor dat u een vervangende tonercartridge gereed hebt. Als u dit bericht ziet voordat u een grote taak wilt gaan afdrukken, moet u eerst de tonercartridge vervangen. Verbruiksartikelen(P. 601) ● Als dit bericht verschijnt tijdens het kopiëren of afdrukken, kunt u doorgaan met het afdrukken van het origineel.
Problemen oplossen Stel de benodigde gegevens voor authenticatie in. De IEEE 802.1X-verificatie is niet goed geconfigureerd. ● Configureer de IEEE 802.1X op de juiste manier vanaf de UI op afstand. IEEE 802.1X-verificatie-instellingen configureren(P. 403) Het opgeven en registreren van nieuwe bestemmingen is beperkt. Alleen bestemmingen die zijn opgeslagen in het adresboek kunnen worden geselecteerd voor het versturen van een fax of een e-mail.
Problemen oplossen ● Geef een faxnummer van de bestemming op dat niet te veel cijfers bevat. (P. 541) Het geheugen is vol. Het verzenden of ontvangen van een fax is mislukt, of een origineel kan niet worden gescand vanwege onvoldoende geheugen. ● Als er een verzend- of afdruktaak in de wachtrij staat, wacht u tot de taak is voltooid. ● Als een ontvangen document in het geheugen is opgeslagen, moet u het document afdrukken of verwijderen.
Problemen oplossen ● Controleer de netwerksleutel (de WPA-/WPA2-PSK- of WEP-sleutel) van de draadloze router en stel de sleutel opnieuw in op het apparaat. Raadpleeg voor meer informatie de handleidingen van uw netwerkapparatuur of neem contact op met de fabrikant. De SSID en de netwerksleutel controleren(P. 30) De verbinding instellen door een draadloze router te selecteren(P. 24) De verbinding instellen door gedetailleerde instellingen op te geven(P. 27) Het USB-geheugen is beperkt.
Problemen oplossen Maatregelen bij iedere foutcode 2U6C-0AL Als er een storing optreedt, bijvoorbeeld als het afdrukken mislukt, of u een fax of gescand origineel niet kunt verzenden of ontvangen, wordt een corresponderende storingscode van drie cijfers weergegeven in een rapport of in het scherm met het takenlogboek. Raadpleeg Rapporten en lijsten afdrukken(P. 596) de volgende informatie om voor iedere foutcode mogelijke oorzaken en oplossingen weer te geven.
Problemen oplossen ● Vraag de ontvanger het papier bij te vullen. #018 Het verzenden van een fax is mislukt omdat de machine van de ontvanger niet heeft gereageerd vanwege een bezette lijn of andere oorzaken. ● Als het apparaat van de ontvanger is uitgeschakeld of als de lijn bezet is, kan een fax mogelijk niet worden verzonden. Vraag de ontvanger de status van het apparaat te controleren. Als u een fax naar het buitenland stuurt, voeg dan pauzes toe aan het faxnummer.
Problemen oplossen ● Probeer af te drukken vanaf het printerstuurprogramma. Misschien helpt dat. #099 Er is een bewerking verricht die ervoor zorgde dat de taak werd geannuleerd. ● Wanneer u een taak annuleert, wordt deze foutcode weergegeven. Er is echter geen sprake van een foutsituatie. Voer de bewerking desgewenst opnieuw uit. #401 Een gescand origineel kan door onvoldoende geheugen niet worden opgeslagen op een USBgeheugenapparaat.
Problemen oplossen Er is geprobeerd de machine te gebruiken zonder een Afdelings-ID in te voeren, terwijl taken met onbekende ID's (waarmee handelingen uitgevoerd kunnen worden zonder Afdelings-ID en pincode) uitgeschakeld zijn in het Afdelings-ID-beheer. ● Meld u in de systeembeheerdersmodus aan bij de UI op afstand en verwijder de beperkingen voor taken met onbekende id's. Taken blokkeren indien afdelings-id onbekend(P.
Problemen oplossen Installatie-/instellingenproblemen(P. 607) #753 Het was niet mogeljk om gescande gegevens als e-mail te verzenden, of als I-Fax te verzenden of te ontvangen, of op te slaan in een gedeelde map of FTP-server, omdat de LAN-kabel is losgekoppeld. ● Controleer of de LAN-kabel goed is aangesloten. Verbinding maken met een bekabeld LAN(P. 17) #755 Het verzenden als e-mail of I-Fax of opslaan in een gedeelde map van gescande gegevens is mislukt omdat TCP/IP niet goed werkt.
Problemen oplossen Een bestemming is niet goed ingesteld. ● Controleer of de bestemming goed is ingesteld. Tijdens het opslaan van een gescand origineel in de gedeelde map is er een fout opgetreden in de map. ● Controleer of de gedeelde map goed werkt, evenals de computer waarop de gedeelde map is opgeslagen. Er is een onjuiste mapnaam of wachtwoord opgegeven bij het opslaan in een gedeelde map. ● Controleer de instellingen van de bestemming.
Problemen oplossen ● Controleer de instellingen van de FTP-server. Bestemmingen vanaf een externe UI registreren(P. 436) #810 Tijdens het verzenden van een e-mail of verzending / ontvangst van een I-Fax, heeft de POP3-server een fout geretourneerd. ● Controleer of de POP3-server goed is ingesteld. ● Controleer of de mailserver en het netwerk goed functioneren. Neem voor meer informatie contact op met de netwerkbeheerder.
Problemen oplossen ● Neem contact op met de wederpartij en vraag ze de instellingen te controleren en de gegevens opnieuw te verzenden. #821 De ontvangen gegevens zijn niet geschikt (er is een TIFF-analysefout opgetreden). ● Neem contact op met de wederpartij en vraag ze de instellingen te controleren en de gegevens opnieuw te verzenden. #822 Een bestand op een USB-geheugenapparaat kan niet worden afgedrukt omdat de indeling van het bestand niet wordt ondersteund.
Problemen oplossen #841 Tijdens het verzenden van een e-mailbericht / I-Fax is een coderingsalgoritme voor de mailserver niet gevonden. ● Schakel het keuzevakje [Gebruik TLS voor SMTP]/[Gebruik TLS voor POP] uit. Communicatie-instellingen voor E-mail/I-Fax configureren(P. 91) ● Voeg het algemene coderingsalgoritme toe aan de instellingen van de mailserver. Tijdens de communicatie met de SMTP-server trad een verificatiefout op met het TLS-servercertificaat.
Problemen oplossen #853 Een document kan niet worden afgedrukt omdat de hoeveelheid gegevens groter is dan de verwerkingslimiet van de machine. ● Het is mogelijk dat het apparaat geen documenten met een groot aantal pagina's kan afdrukken. Druk minder pagina's tegelijk af of druk pas af als er geen taken meer in de wachtrij staan of als er geen documenten worden afgedrukt. Als u nog steeds niet kunt afdrukken, controleert u de documentgegevens op fouten. Het afdrukken is geannuleerd vanaf de computer.
Problemen oplossen #863 Er is een fout opgetreden tijdens het afdrukken vanaf een computer. ● Zet de machine uit, wacht minimaal 10 seconden en zet de machine weer aan. Probeer opnieuw af te drukken nadat de machine opnieuw is opgestart. #995 Een document dat wacht op verzending of ontvangst, is geannuleerd. ● Verzend of ontvang het document eventueel opnieuw.
Problemen oplossen Papierstoringen verhelpen 2U6C-0AR Als er een papierstoring optreedt, verschijnt op het scherm. Selecteer om eenvoudige oplossingen weer te geven. Als u de procedures op het scherm niet goed begrijpt, raadpleegt u de volgende gedeeltes om storingen te verhelpen. Documentinvoer Papierstoringen in de documentinvoer(P. 660) Multifunctionele invoer / papierlade Papierstoringen in de papierlade(P. 668) Binnenkant Papierstoringen in de hoofdeenheid(P.
Problemen oplossen Als het papier scheurt ● Zorg dat u alle papierresten verwijdert om te voorkomen dat het apparaat opnieuw vastloopt. Als zich herhaaldelijk papierstoringen voordoen ● Waaier de papierstapel uit en tik de uiteinden op een vlak oppervlak om het papier uit te lijnen voordat u het in het apparaat plaatst. ● Controleer of het papier wel geschikt is voor het apparaat. Geschikt papier(P. 689) ● Controleer of er geen papierresten zijn achtergebleven in het apparaat.
Problemen oplossen Papierstoringen in de documentinvoer 2U6C-0AS Als er originelen in de documentinvoer zijn geplaatst, verwijdert u deze eerst. Volg dan onderstaande procedure. Trek het vastgelopen papier niet hardhandig uit het apparaat. Als het vastgelopen papier niet gemakkelijk kan worden verwijderd, gaat u verder met de volgende stap. 1 Verwijder het vastgelopen origineel uit de klep van de documentinvoer. 1 Open de klep van de documentinvoer. 2 Trek het origineel voorzichtig uit de invoer.
Problemen oplossen 2 Trek het origineel voorzichtig uit de invoer. 3 Sluit de documentinvoer voorzichtig. 3 Plaats het origineel weer.
Problemen oplossen Papierstoringen in de hoofdeenheid 2U6C-0AU Verwijder het vastgelopen papier volgens de procedure die geldt voor de locatie waar een papierstoring optreedt. Binnenkant Vastgelopen papier in het apparaat of in de achterzijde(P. 662) Duplex transportgeleider Papierstoringen bij de transportgeleider voor duplex afdrukken(P. 665) Achterzijde Vastgelopen papier in het apparaat of in de achterzijde(P.
Problemen oplossen 3 Houd de groene knop aan de voorzijde ingedrukt en til de transportgeleider op. ● Haal uw handen pas van de transportgeleider nadat deze weer in de uitgangspositie staat in stap 5. 4 Trek het papier voorzichtig uit het apparaat. 5 Zet de transportgeleider behoedzaam terug. 6 Houd de groene knop aan de voorzijde ingedrukt en til de transportgeleider op. ● Haal uw handen pas van de transportgeleider nadat deze weer in de uitgangspositie staat in stap 8.
Problemen oplossen 7 Trek het papier voorzichtig uit het apparaat. ● Verwijder het vastgelopen papier zo vlak mogelijk om te voorkomen dat niet-gefixeerde toner eraf valt. 8 Zet de transportgeleider behoedzaam terug. 9 Open de achterklep. 10 Trek het papier voorzichtig uit het apparaat.
Problemen oplossen 11 Sluit de achterklep. 12 Installeer de tonercartridge. ● Druk de cartridge beslist zo ver aan tot hij niet verder kan. 13 Sluit de voorklep. Als het bericht aanwezig blijft ● Op andere locaties kan papier zijn vastgelopen. Controleer de andere locaties, en verwijder eventueel vastgelopen papier. Als het bericht aanwezig blijft, controleer dan of de klep aan de voorzijde goed is gesloten.
Problemen oplossen 3 Trek het papier voorzichtig uit het apparaat. 4 Zet de transportgeleider voor duplex afdrukken terug in zijn stand. ● Sluit de geleider helemaal tot hij vastklikt. 5 Plaats de papierlade. 6 Open en sluit de voorklep. ● Als de klep aan de voorzijde wordt geopend en gesloten, verdwijnt het bericht over de papierstoring. 1 Open de klep aan de voorzijde. 2 Sluit de voorklep.
Problemen oplossen Als het bericht aanwezig blijft ● Op andere locaties kan papier zijn vastgelopen. Controleer de andere locaties, en verwijder eventueel vastgelopen papier. Als het bericht aanwezig blijft, controleer dan of de klep aan de voorzijde goed is gesloten.
Problemen oplossen Papierstoringen in de papierlade 2U6C-0AW Verwijder het vastgelopen papier volgens de procedure die geldt voor de locatie waar een papierstoring optreedt. Multifunctionele lade Papierstoringen in de multifunctionele lade(P. 668) Papierlade Papierstoringen in de papierlade(P. 668) Papierstoringen in de multifunctionele lade Als er zich papier in de lade bevindt, verwijder het dan eerst.
Problemen oplossen 2 Trek het papier voorzichtig uit het apparaat. ● Als de optionele paper feeder is bevestigd, trekt u het papier op dezelfde manier voorzichtig uit het apparaat. 3 4 Plaats de papierlade. Selecteer als het schermbericht wordt weergegeven. Als het bericht aanwezig blijft ● Op andere locaties kan papier zijn vastgelopen. Controleer de andere locaties, en verwijder eventueel vastgelopen papier.
Problemen oplossen Als een probleem niet kan worden opgelost 2U6C-0AX Als u door het raadplegen van de informatie in dit hoofdstuk een probleem nog steeds niet kunt oplossen, neemt u contact op met de dichtstbijzijnde Canon-dealer of met de Canon-helpdesk. Het is niet toegestaan het apparaat te demonteren of te repareren ● Als u dat wel doet, bestaat de kans dat de garantie vervalt.
Bijlage Bijlage Bijlage ................................................................................................................................................................... 672 Software van derden ......................................................................................................................................... 674 Handige functies ............................................................................................................................................
Bijlage Bijlage 2U6C-0AY Dit hoofdstuk bevat de technische specificaties van dit apparaat, instructies voor het gebruik van de Gebruikershandleiding, disclaimers, auteursrechtinformatie en andere belangrijke informatie voor klanten. ◼ Apparaatspecificaties Raadpleeg het (de) volgende gedeelte(s) als u de specificaties van de hoofdeenheid en optionele apparatuur, netwerkomgeving, afdrukfunctie, enzovoort wilt controleren. Technische specificaties(P.
Bijlage Software van derden(P. 674) Handige functies(P. 675) Basisbewerkingen in Windows(P. 716) Kennisgeving(P.
Bijlage Software van derden 2U6C-0C0 Voor informatie over software van derden klikt u op het (de) volgende pictogram(men).
Bijlage Handige functies 2U6C-0C1 Dit gedeelte beschrijft tips om de apparaatfuncties per categorie te versterken. U kunt gebruik maken van de functies aan de hand van uw beoogd gebruik en werkomgeving. Milieubesparing levert geld op(P. 676) Efficiënter werken(P. 678) Digitaal is beter(P. 680) Ongekende mogelijkheden(P.
Bijlage Milieubesparing levert geld op 2U6C-0C2 Er zijn veel manieren om papier, toner, stroom en kosten te besparen. Dubbelzijdig afdrukken Meerdere pagina's op één vel papier afdrukken U kunt dubbelzijdig afdrukken gebruiken voor kopieën, afdruktaken verzonden uit uw computer, en zelfs binnenkomende faxen. Omdat u dan de helft minder papier gebruikt dan anders, kunt u uw papierkosten halveren.
Bijlage Als u energie en geld wilt besparen, is een zogenaamde slaapstand een onmisbare functie. De stroomtoevoer naar de machine wordt dan uitgeschakeld als er gedurende bepaalde tijd geen activiteit is waargenomen. De slaapstand kan automatisch worden geactiveerd, maar ook handmatig. Druk op om de machine in de slaapstand te plaatsen. Druk nogmaals op de toets om de machine weer te activeren. De slaapstand instellen(P.
Bijlage Efficiënter werken 2U6C-0C3 Hier zijn een paar eenvoudige bewerkingen die gecompliceerde taken efficiënter maken. Adresboek Vaak gebruikte instellingen onder een knop Als u faxnummers en e-mailadressen invoert in het adresboek, hoeft u niet steeds alle cijfers van het nummer of letters van het adres in te voeren als u iets wilt gaan versturen. De U maakt altijd dubbelzijdige kopieën. U scant altijd in hetzelfde formaat en slaat de scans altijd op dezelfde plaats op.
Bijlage Afbeeldingen rechtstreeks vanaf een USBgeheugenapparaat afdrukken Beheer op afstand met de UI op afstand Steek een USB-geheugenapparaat in het apparaat en u kunt afbeeldingen en documenten direct afdrukken, Met de UI op afstand kunt u een heleboel dingen beheren vanaf uw computer, dus zonder dat u naar de machine hoeft te lopen. Via een intuïtieve en gebruiksvriendelijke interface in een webbrowser kunt u eenvoudig instellingen configureren en de status van de machine in de gaten houden.
Bijlage Digitaal is beter 2U6C-0C4 Als u een document digitaliseert, kunt u het bewerken met een computer, maar ook kosten en tijd besparen door email te gebruiken. Scannen en mailen Scannen en delen U kunt gescande orginelen per e-mail versturen zonder dat u uw computer hoeft aan te zetten. Converteer het gescande origineel vanaf de machine naar een e-mailbijlage. Als u van de generatie bent Stel dat u een papieren exemplaar hebt van een rapport dat moet worden besproken met alle managers.
Bijlage Waarom zou je een hele pagina van een krant scannen als je eigenlijk alleen maar geïnteresseerd bent in een kop en de bijbehorende foto? In zo'n situatie is ScanGear MF de ideale oplossing. Hiermee kunt u in een voorbeeld aangeven wat u wilt scannen, waarna de scanner zijn werk doet. Dit is eenvoudiger dan met een speciaal programma alle overbodige informatie te verwijderen. ScanGear MF gebruiken(P.
Bijlage Ongekende mogelijkheden 2U6C-0C5 Er is een scala aan functies voor wat u ook maar wilt doen: thuis, op kantoor, of zelfs onderweg.
Bijlage Eenvoudig afdrukken met Google Cloudprinter Afdrukken beveiligen Maak vanaf uw laptop of smartphone verbinding met Google Cloudprinter, verstuur uw gegevens Als u een afdrukopdracht verstuurt vanaf uw computer, wordt de opdracht normaal gesproken direct afgedrukt. In het geval en haal de afdrukken op bij het apparaat. Met dit apparaat, Google Cloudprinter en uw mobiele apparaat kunt u altijd en overal afdrukken. Google Cloudprinter gebruiken(P.
Bijlage Technische specificaties 2U6C-0C6 Specificaties van het apparaat kunnen zonder vooraankondiging worden gewijzigd bij verbeteringen van het apparaat of toekomstige vrijgave. ◼ Apparaatspecificaties Hoofdeenheid(P. 685) Documentinvoer(P. 688) Geschikt papier(P. 689) ◼ Specificaties van optioneel verkrijgbare apparatuur Paper Feeder PF-C(P. 692) Copy Card Reader-F(P. 693) ◼ Functionele specificaties Faxfunctie(P. 694) Scanfunctie(P. 695) Printerfuncties(P. 696) Beheerfuncties(P.
Bijlage Hoofdeenheid 2U6C-0C7 ● Voor informatie over papierformaat en -type raadpleegt u ' Type Bureaublad Met kleurondersteuning Zwart-wit Resolutie voor het lezen 600 x 600 dpi Resolutie voor het schrijven 600 x 600 dpi Aantal tinten 256 Acceptabele originelen Maximaal 215,9 mm x 355,6 mm Geschikt papier(P. 689) '.
Bijlage 4,0 seconden of minder Tijd voor eerste kopie Ongeveer 6,3 seconden (A4) Kopieersnelheid *2 (A4) 43,0 vellen/minuut Vergroting 25 tot 400% (in stappen van 1%) Papiertoevoersysteem/-capaciteit *3 Papierlade 550 vel (80 g/m²) / 640 vel (64 g/m²) x 1 Multifunctionele lade 100 vel (80 g/m²)/100 vel (64 g/m²) x 1 Papieruitvoersysteem/-capaciteit *3 Uitvoerlade 250 vel (68 g/m²) Meerdere kopieën 999 vel Stroomtoevoer 220 tot 240 V wisselstroom; 3,9 A; 50 / 60 Hz Opgenomen vermogen *1 Maxima
Bijlage Geheugencapaciteit RAM: 1 GB Omgevingsomstandigheden Temperatuur: 10 °C tot 30 °C Relatieve luchtvochtigheid: 20 tot 80% (geen condensvorming) *1Kan variëren al naar gelang de omgeving waar het apparaat wordt gebruikt. *2De afdruk- en kopieersnelheden zijn gemeten door middel van een interne test waarbij enkelzijdige kopieën/ afdrukken zijn gemaakt op papier in A4-formaat, met een kopieer-/afdrukverhouding van 100% ten opzichte van het originele document.
Bijlage Documentinvoer 2U6C-0C8 Toevoermechanisme origineel Automatische dubbelzijdige documenttoevoer Origineel formaat *1 / type Formaat originelen ● Max : 215,9 mm x 355,6 mm ● Min : 105 mm x 128 mm Gewicht originelen 50 g/m² tot 105 g/m² Ladecapaciteit origineel 50 vel (80 g/m²) (A4) Scansnelheid origineel Kopiëren (300 dpi x 600 dpi, A4) Enkelzijdig scannen: ● 40 pagina's/minuut Dubbelzijdig scannen: ● 67 pagina's/minuut Scannen (300 dpi x 300 dpi, A4) *2 Enkelzijdig scannen: ● Volkleuren (PDF)
Bijlage Geschikt papier 2U6C-0C9 De volgende tabel toont de papiertypes die bij dit apparaat kunnen worden gebruikt.
Bijlage Papierlade *1 Multifunctionele invoer Automatisch dubbelzijdig afdrukken *2 Papierformaten Envelop Nr. 10 (COM10) Envelop Monarch Envelop C5 Envelop DL Aangepast papierformaat *1Inclusief *7 *8 *9 de optionele Paper Feeder PF-C. *2Automatisch dubbelzijdig afdrukken is beschikbaar zonder dat u papier hoeft te vervangen. *3Hiermee kunt u ontvangen faxdocumenten afdrukken. *4Hiermee kunt u ontvangen I-Faxdocumenten afdrukken. *5Hiermee kunt u rapporten of lijsten afdrukken.
Bijlage Papiersoort Dik 3 121 g/m² tot 149 g/m² Dik 4 150 g/m² tot 199 g/m² Dun 1 *3*5 60 g/m² Dun 2 52 g/m² tot 59 g/m² Bond 1 60 g/m² tot 74 g/m² Bond 2 75 g/m² tot 104 g/m² Bond 3 105 g/m² tot 120 g/m² Papierlade *1 Multifunctionele lade Automatisch dubbelzijdig afdrukken *2 Etiketten Envelop Envelop H *1Inclusief de optionele Paper Feeder PF-C. *2Automatisch dubbelzijdig afdrukken is beschikbaar zonder dat u papier hoeft te vervangen.
Bijlage Paper Feeder PF-C 2U6C-0CA Papierformaten ● Max: 215,9 mm x 355,6 mm ● Min: 105 mm x 148 mm Papiergewicht 52 g/m² tot 120 g/m² Capaciteit papierladen * 550 vel (80 g/m²) / 640 vel (64 g/m²) x 1 Afmetingen 417 mm x 373 mm x 156 mm (B x L x H) Gewicht Circa 4,0 kg *Is afhankelijk van de installatieomgeving en de gebruikte papier.
Bijlage Copy Card Reader-F 2U6C-0CC Beschikbare kaarten Magnetisch Kaartleesmethode Magnetische uitlezing Leesrichting magnetische kaart Voorzijde omhoog Opslaan/Weer afspelen Weer afspelen Afmetingen 88 mm x 96 mm x 40 mm (zonder het bevestigingspakket en de kabel) (B x L x H) Gewicht Circa 200 g (zonder het bevestigingspakket en de kabel) 693
Bijlage Faxfunctie 2U6C-0CE Gebruikte telefoonlijn *1 Openbaar telefoonnetwerk (PSTN), fax-communicatienetwerk Dichtheid scanlijn Normaal G3: 8 pels*2/mm x 3,85 lijn/mm Fijn G3: 8 pels*2/mm x 7,7 lijn/mm Superfijn G3: 8 pels*2/mm x 15,4 lijn/mm Ultrafijn G3: 16 pels*2/mm x 15,4 lijn/mm Transmissiesnelheid *3 Super G3: 33,6 kbps G3: 14,4 kbps Compressiemethode MH, MR, MMR, JBIG Transmissietype Super G3, G3 Maximale verzending originele formaten A4 Papierformaten ontvangen Transmissietijden Gesc
Bijlage Scanfunctie 2U6C-0CF Type Kleurenscanner Scanformaat origineel (max) 215,9 mm x 355,6 mm Resolutie (max) 600 x 600 dpi Scansnelheid Zelfde als "scansnelheid origineel" in "Invoer" Documentinvoer(P. 688) Interface USB USB 2.0 Hi-Speed Bedraad LAN 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3 compatibel) Draadloos LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.
Bijlage Printerfuncties 2U6C-0CH ◼ UFR II-printerfunctie Type Afdrukformaat Afdruksnelheid Intern Geschikt papier(P. 689) Zelfde als "kopieersnelheid" in "Hoofdeenheid" Hoofdeenheid(P. 685) Resolutie Dataverwerking 1200 dpi x 1200 dpi, 600 dpi x 600 dpi Paginabeschrijvingstaal (PDL) UFR II Protocol ondersteund TCP/IP: LPD, Port9100, IPP, IPPS, WSD Residente lettertypes Geen Interface USB USB 2.0 Hi-Speed Bedraad LAN 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.
Bijlage Protocol ondersteund TCP/IP: LPD, Port9100, IPP, IPPS, WSD Residente lettertypes 136 Roman Interface USB USB 2.0 Hi-Speed Bedraad LAN 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3 compatibel) Draadloos LAN IEEE 802.11b, IEEE 802.11g, IEEE 802.11n ◼ PCL Printerfunctie Type Afdrukformaat Afdruksnelheid Intern Geschikt papier(P. 689) Zelfde als "kopieersnelheid" in "Hoofdeenheid" Hoofdeenheid(P.
Bijlage Beheerfuncties 2U6C-0CJ ◼ Authenticatiefuncties ● Het apparaat communiceert met LDAP-servers via LDAPv3. ● UTF-8 is de ondersteunde tekencodering die wordt gebruikt bij het uitwisselen van tekstgegevens tussen het apparaat en een LDAP-server. ◼ Firewallinstellingen ● U kunt maximaal 16 IP-adressen (of bereiken van IP-adressen) opgeven voor zowel IPv4 als IPv6. ● De hier beschreven pakketfilters besturen de communicatie over TCP, UDP en ICMP. ● U kunt maximaal 32 MAC-adressen opgeven.
Bijlage ● IPSec ondersteunt communicatie naar een unicast-adres (of een bepaald apparaat). ● Het apparaat kan niet tegelijkertijd IPSec en DHCPv6 gebruiken. ◼ Registratie van sleutels en certificaten ● Als u een sleutel of een CA-certificaat installeert vanaf een computer, zorg er dan voor dat het onderdeel voldoet aan deze vereisten: ● Sleutel: PKCS#12*1 Indeling ● CA certificaat: X.509 DER/PEM ● Sleutel: '.p12' of '.pfx' Bestandsextensie ● CA-certificaat: '.cer' of '.
Bijlage ● Zelfs wanneer is ingesteld op , Kan het hashalgoritme SHA-1, dat wordt gebruikt om een basiscertificaat te ondertekenen, worden gebruikt.
Bijlage Besturingssystemen 2U6C-0CK Systeemomgeving voor WSD scan ● Windows 8.1 ● Windows 10 Systeemvereisten voor de externe UI *1 Windows ● Windows 7 / 8.1 / 10: Internet Explorer 11 of hoger ● Windows 10: rand macOS ● Mac OS X 10.5 of hoger ● Safari 5.0.6 of hoger Android ● Chrome ● UC-browser iOS ● Safari ● UC-browser Doorstuurserversoftware voor e-mail / I-Fax ● Microsoft Exchange Server 2007 SP3 ● Microsoft Exchange Server 2010 ● Microsoft Exchange Server 2013 ● Lotus Domino R7.0 ● Sendmail 8.
Bijlage ● Windows Server 2012 met Active Directory ● Windows Server 2012 R2 met Active Directory ● eDirectory V8.8 SP7 of hoger ● Lotus Domino R8.5 of hoger Systeemvereisten voor de Instel-tool Zendfunctie ● Windows 7 / 8.
Bijlage Netwerkomgeving 2U6C-0CL ◼ Algemene specificaties Protocol ondersteund TCP/IP ● Frametype: Ethernet II ● Afdruktoepassingen: LPD, Raw, IPP, IPPS, WSD, Mopria, Google Cloud Print, AirPrint, Windows10 Mobile Print ◼ Specificaties bedraad LAN Interface Interface ondersteuning 10BASE-T, 100BASE-TX, 1000BASE-T (RJ-45) ◼ Specificaties draadloos LAN Standaard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Transmissieschema IEEE 802.11b (modulatiesysteem: DS-SS) IEEE 802.
Bijlage Opties 2U6C-0CR Als u opties op het apparaat installeert, kunt u meer functies gebruiken. ◼ Weten welke types opties beschikbaar zijn Als optie verkrijgbare apparatuur(P. 705) Systeemopties(P. 707) ◼ Doelgericht zoeken naar optioneel verkrijgbare apparatuur Een papierlade toevoegen Paper Feeder PF-C(P. 705) Faxen handmatig versturen, bellen of gebeld worden TELEPHONE 6 KIT(P. 705) Met behulp van de authenticatiefunctie gebruikers per afdeling beheren Copy Card Reader-F(P.
Bijlage Als optie verkrijgbare apparatuur 2U6C-0CS U kunt de functionaliteit van het apparaat volledig benutten door als optie verkrijgbare hieronder beschreven apparatuur toe te passen. Als optie verkrijgbare apparatuur kunt u aanschaffen bij de leverancier waar u het apparaat hebt aangeschaft of bij de Canon-dealer ter plaatse. Paper Feeder PF-C(P. 705) TELEPHONE 6 KIT(P. 705) Copy Card Reader-F(P.
Bijlage Kaartsleuf Steek de controlekaart in de kaartsleuf wanneer het inlogscherm wordt weergegeven. Neem de controlekaart uit de kaartsleuf na gebruik van het apparaat. Controlekaart U kunt de controlekaart gebruiken die hieronder wordt getoond. Houd de voorzijde van de kaart ondersteboven en steek hem in de richting in die op de kaart is aangegeven.
Bijlage Systeemopties 2U6C-0CU De prestaties van het apparaat kunnen zelfs worden verbeterd door meer systeemopties te installeren. Barcode Printing Kit(P. 707) Send PDF Security Feature Set(P. 707) Licentieregistratie(P. 707) Barcode Printing Kit Met deze optie kunt u streepjescodes genereren in diverse formaten. Let op: wilt u streepjescodes afdrukken, dan moet PCL zijn ingeschakeld.
Bijlage ● Als het aanmeldingsscherm verschijnt, voert u de juiste combinatie van ID en pincode in. het apparaat(P. 133) Aanmelden bij 3 Selecteer 4 Bevestig het bericht dat wordt weergegeven en selecteer . 5 Voer de licentiesleutel in met de numerieke toetsen en selecteer . . ➠ De registratie wordt gestart. Wacht totdat de melding
Bijlage Handleidingen en hun inhoud 2U6C-0CW Het apparaat wordt geleverd met de volgende handleidingen. Raadpleeg deze handleidingen als u iets niet weet. Aan de slag Lees deze handleiding eerst. Er worden enkele basisprocedures beschreven, van het verwijderen van het verpakkingsmateriaal tot het installeren van het apparaat. Gebruikershandleiding (Deze handleiding) In deze handleiding worden alle functies van het apparaat beschreven. U kunt de handleiding weergeven in een webbrowser.
Bijlage Gebruikershandleiding gebruiken 2U6C-0CX De Gebruikershandleiding is een handleiding die u via uw computer of mobiel toestel kunt raadplegen. In de handleiding vindt u beschrijvingen van alle apparaatfuncties. U kunt een zoekopdracht ingeven op basis van het beoogde apparaatgebruik of een trefwoord invoeren om snel de pagina te vinden die u zoekt. Het gedeelte beschrijft de schermindeling van de Gebruikershandleiding en hoe u de handleiding moet lezen.
Bijlage Schermindeling van Gebruikershandleiding 2U6C-0CY De Gebruikershandleiding is opgesplitst in verschillende schermen en de inhoud van elk scherm varieert. Bovenste pagina Verschijnt wanneer u Gebruikershandleiding start. / Klik op om ook alle gedeelten onder de hoofdstukken weer te geven. Klik op naar de vorige weergave. om terug te keren / Klik hierop om heen en weer te schakelen tussen de inhoud en de zoekfunctie.
Bijlage Klik hierop om belangrijke informatie weer te geven waarmee u bekend moet zijn voordat u het apparaat gaat gebruiken. Onderwerppagina Deze pagina bevat informatie over het configureren en gebruiken van het apparaat. Navigatie Zie welk hoofdstukonderwerp u momenteel bekijkt. Klik hierop om naar de overeenkomstige pagina te gaan. Klik op "Terug" in uw webbrowser om terug te gaan naar de vorige pagina.
Bijlage / Klik op om de verborgen gedetailleerde beschrijvingen weer te geven. Klik op gedetailleerde beschrijvingen te sluiten. om de Klik hierop om naar het begin van de pagina te gaan. Zoeken Klik op om het zoekvenster weer te geven. Dit bevat een tekstvak om een zoekopdracht met trefwoorden uit te voeren en naar de gewenste pagina te zoeken. [Voer hier trefwoord(en) in] Voer (een) trefwoord(en) in en klik op om de zoekresultaten weer te geven.
Bijlage Geeft de zoekresultaten weer van de pagina's die de opgegeven trefwoorden bevatten. Zoek in de resultaten naar de gewenste pagina en klik op de onderwerptitel van de pagina. ● De ingevoerde trefwoorden worden vetgedrukt weergegeven in de zoekresultaten.
Bijlage Gebruikershandleiding inzien 2U6C-0E0 Dit gedeelte beschrijft de merktekens, knoppen, schermen, en andere items die worden gebruikt in de Gebruikershandleiding. De waarschuwingen worden ook gegeven in de bij het apparaat meegeleverde 'Belangrijke veiligheidsvoorschriften' in het 'Aan de slag'. Raadpleeg ook deze instructies.
Bijlage Basisbewerkingen in Windows 2U6C-0E2 De printermap weergeven(P. 716) [Netwerk zoeken] inschakelen(P. 716) Printers weergeven die worden gedeeld op de printserver(P. 717) Het scherm [Installatie van softwareprogramma's/handleidingen] weergeven(P. 718) Een testpagina afdrukken in Windows(P. 718) De bitarchitectuur controleren(P. 719) De computernaam controleren(P. 720) De printerpoort controleren(P. 721) Bidirectionele communicatie controleren(P.
Bijlage [Starten] selecteer [Configuratiescherm] [Netwerkstatus en -taken weergeven] [Geavanceerde instellingen voor delen wijzigen] selecteer [Netwerkdetectie inschakelen] onder [Netwerkdetectie]. Windows 8/Server 2012 Klik met de rechter muisknop op de linker onderhoek van het scherm selecteer [Configuratiescherm] [Netwerkstatus en -taken weergeven] [Geavanceerde instellingen voor delen wijzigen] selecteer [Netwerkdetectie inschakelen] onder [Netwerk detecteren]. Windows 8.
Bijlage ◼ Het scherm [Installatie van softwareprogramma's/handleidingen] weergeven Als uw computer het scherm [Installatie van softwareprogramma's/handleidingen] niet weergeeft nadat u de CDROM/DVD-ROM hebt geplaatst, volg dan onderstaande procedure. De stationsnaam van CD-ROM/DVD-ROM wordt in deze handleiding aangeduid met 'D:'. De naam van CD-ROM/DVD-ROM kan verschillen afhankelijk van de computer die u gebruikt. Windows Vista/7/Server 2008 [Starten] typ "D:\MInst.
Bijlage 4 Klik op [Testpagina afdrukken] in het tabblad [Algemeen]. ➠ De testpagina wordt afgedrukt. ◼ De bitarchitectuur controleren Weet u niet zeker of op uw computer de 32-bits of 64-bits versie van Windows wordt uitgevoerd, volg dan onderstaande procedure. 1 Open het onderdeel [Configuratiescherm]. Windows Vista/7/Server 2008 [Starten] selecteer [Configuratiescherm] Windows 8/Server 2012 Klik met de rechtermuisknop in de linkerbenedenhoek van het scherm Windows 8.
Bijlage Windows Vista/7/8/Server 2008 R2/Server 2012 Klik op [Systeem en onderhoud] of [Systeem en beveiliging] Windows 10 / Server 2016 Klik op [ ] [Instellingen] [Systeem] [Systeem]. selecteer [Info]. Windows Server 2008 Dubbelklik op [Systeem]. 3 Controleer de bitarchitectuur. Voor 32-bits versies [32 bitsbesturingssysteem] wordt weergegeven. Voor 64-bits versies [64 bitsbesturingssysteem] wordt weergegeven. ◼ De computernaam controleren 1 Open het onderdeel [Configuratiescherm].
Bijlage Windows Server 2008 Dubbelklik op [Systeem]. 3 Controleer de naam van de computer. ◼ De printerpoort controleren 1 2 Open de printermap. De printermap weergeven(P. 716) Klik met de rechtermuisknop op het pictogram van het printerstuurprogramma voor dit apparaat en klik op [Eigenschappen van printer] of [Eigenschappen].
Bijlage 3 Op het tabblad [Poorten] moet u controleren dat de poort correct is geselecteerd. Als u een netwerkverbinding gebruikt en het IP-adres van het apparaat hebt veranderd ● Als [Beschrijving] voor de geselecteerde poort op [Canon MFNP Port] staat en het apparaat en de computer bevinden zich op hetzelfde subnet, wordt de verbinding gehandhaafd. U hoeft geen nieuwe poort toe te voegen. Als het [Standaard TCP/IP poort] is, moet u een nieuwe poort toevoegen. Printerpoorten configureren(P.
Bijlage 3 Controleer dat het selectievakje [Ondersteuning in twee richtingen inschakelen] op het tabblad [Poorten] is ingeschakeld. ◼ De SSID waarop de computer is aangesloten, bekijken In het geval de computer is aangesloten op een draadloos LAN netwerk, klikt u op systeemlade om de SSID van de aangesloten draadloos LAN router weer te geven.
Bijlage ● Als u een document afdrukt of faxen verzendt volgens deze methode, is er slechts een beperkt aantal functies beschikbaar. ● Als het bericht [Er is iets met de printer. Ga naar het bureaublad om dit op te lossen.] wordt weergegeven, gaat u naar het bureaublad en verricht u de vereiste handelingen. Dit bericht verschijnt wanneer het apparaat zo is ingesteld dat tijdens taken zoals het afdrukken van documenten of het verzenden van faxen, de gebruikersnaam wordt weergegeven.
Bijlage Kennisgeving 2U6C-0E3 Als u last hebt van het geluid van het apparaat ● Afhankelijk van het gebruik, de omgeving en de bedrijfsstand, wordt u geadviseerd, als u last hebt het geluid van het apparaat, het apparaat op een plaats buiten uw kantoor te installeren. ◼ IPv6 Gereed-logo De protocolset in dit apparaat heeft het IPv6 Ready-logo Phase-2 verkregen, vastgesteld door het IPv6 Forum. ◼ Productgegevens die verplicht zijn krachtens COMMISSIEVERORDENING (EG) nr.
Bijlage Dit product dient te worden ingeleverd bij een hiervoor aangewezen inzamelpunt, bijv. door dit in te leveren bij een hiertoe erkend verkooppunt bij aankoop van een gelijksoortig product, of bij een officiële inzameldienst voor de recycling van elektrische en elektronische apparatuur (EEA) en batterijen en accu's.
Bijlage IOS is een handelsmerk of gedeponeerd handelsmerk van Cisco in de V.S. en andere landen en wordt gebruikt onder licentie. Google Cloudprinter, Google Chrome en Android zijn handelsmerken of gedeponeerde handelsmerken van Google Inc. This product contains the Universal Font Scaling Technology or UFST® under license from Monotype Imaging, Inc. UFST® is a trademark of Monotype Imaging, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions.
Bijlage Het PDF-logo is een handelsmerk of geregistreerd handelsmerk van Adobe Systems Incorporated in de Verenigde Staten en andere landen. Copyright © 2008 Adobe Systems Incorporated. All rights reserved. Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269; 7,272,628; 7,278,168; Patents pending in the U.S. and other countries. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated.
SIL OPEN FONT LICENSE This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFL ----------------------------------------------------------SIL OPEN FONT LICENSE Version 1.
SIL OPEN FONT LICENSE 1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself. 2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license.
Diensten van derden Als u via het PRODUCT diensten van derden gebruikt, moeten deze diensten aan onderstaande voorwaarden voldoen.
Software onderhevig aan overige licentievoorwaarden Raadpleeg de softwaretabel en de bijbehorende licentietermen hieronder voor meer informatie en bijbehorende licentievoorwaarden.
Adobe PostScript 3 Copyright 2007-2008 Adobe Systems Incorporated and its licensors. All rights reserved. Portions include software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ Portions of Pool.c_Copyright 1987 - NeXT, Inc., and portions of Graphics.c_Copyright 1988 NeXT, Inc.
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This code is derived from software contributed to Berkeley by James A. Woods, derived from original work by Spencer Thomas and Joseph Orost. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
Portions of this product are based on Modifications created from the Original Code known as the "Sablotron XSLT Processor". The Sablotron XSLT Processor is subject to the Mozilla Public License Version 1.1 (the "License"). You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Adobe PDF Scan Library Portions use software under the following terms: ______________________________________________________________________________________ This product contains either BSAFE and/or TIPEM software by RSA Security Inc. ______________________________________________________________________________________ This product includes software developed by the Apache Software Foundation (http://www.apache.org/). Copyright (c) 1998-2000 The Apache Software Foundation. All rights reserved.
This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation and was originally based on software copyright (c) 1999, International Business Machines, Inc., http://www.ibm.com. For more information on the Apache Software Foundation, please see .
The Loki Library Portions Copyright (c) 2001 by Andrei Alexandrescu . This code accompanies the book: Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns Applied". Portions Copyright (c) 2001. Addison-Wesley.
expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
HarfBuzz 2012-07-30 Copyright (C) 2006 Behdad Esfahbod Copyright (C) 1998-2004 David Turner and Werner Lemberg Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies) Copyright (C) 2004,2007 Red Hat, Inc. Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this software and its documentation for any purpose, provided that the above copyright notice and the following two paragraphs appear in all copies of this software.
libjingle Copyright 2004--2007, Google Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Lua Copyright © 1994–2014 Lua.org, PUC-Rio.
LuaSocket LuaSocket 2.0.
MD4 "RSA Data Security, Inc.
Net-SNMP Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 8: Apple Inc. copyright notice (BSD) ----Copyright (c) 2007 Apple Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
Copyright (c) 2009, ScienceLogic, LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenSSL OpenSSL License --------------/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2.
* * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
* derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.