㻝㻌㻛㻌㻣㻠㻠
Wichtige Sicherheitsvorschriften Aufstellung Stromversorgung Handhabung Wartung und Überprüfung Verbrauchsmaterial Grundfunktionen Teile und ihre Funktionen Vorderseite Rückseite Innen Manuelle Zufuhr Papierkassette Bedienfeld Display Anpassen des Bildschirms Verwendung des Displays Eingeben von Text Anmelden am Gerät Einlegen von Dokumenten Einlegen von Papier Einlegen von Papier in die Papierkassette Einlegen von Papier in die manuelle Zufuhr Einlegen von Briefumschlägen Einlegen von bereits
Kopieren mehrerer Dokumente auf ein Blatt (2 auf 1/4 auf 1) 102 Kopieren beider Seiten einer Ausweiskarte auf eine Seite 103 Löschen dunkler Ränder und Rahmenlinien (Rahmenlöschung) 104 Sortieren von Kopien nach Seitenreihenfolge 105 Anpassen der Kopiereinstellungen je nach Anforderungen 106 Ändern von Standardeinstellungen 107 Registrieren häufig verwendeter Kopiereinstellungen 108 Faxen 110 Konfigurieren der Anfangseinstellungen für Faxfunktionen (MF729Cx / MF728Cdw / MF628Cw) 112 Ermitteln des geeigneten
Verwenden des Geräts als Drucker 193 Drucken von einem Computer 194 Drucken von Dokumenten 196 Abbrechen des Druckens 199 Anzeigen des Druckstatus und des Logs 201 Verschiedene Druckeinstellungen 203 Vergrößern oder Verkleinern 204 Wechseln zwischen einseitigem und doppelseitigem Druck (MF729Cx / MF728Cdw / MF724Cdw) 206 Sortieren von Ausdrucken nach Seitenreihenfolge 208 Drucken mehrerer Seiten auf ein Blatt 209 Drucken von Postern 210 Drucken einer Broschüre (MF729Cx / MF728Cdw / MF724Cdw) 211 Drucken von
Scannen doppelseitiger Dokumente (MF729Cx / MF728Cdw / MF724Cdw) Justieren der Schärfe Einstellen der Balance zwischen Dateigröße und Bildqualität Einstellen von Gammawerten Senden unter Verwendung von gespeicherten Empfängern (E-Mail/I-Fax/Gemeinsamer Ordner/FTPServer) Angeben aus dem Adressbuch Direktauswahl von Empfängern durch Eingabe von Nummern für die kodierte Wahl Angeben von zuvor verwendeten Empfängern Angeben von auf einem LDAP-Server gespeicherten Empfängern (E-Mail/I-Fax) Anpassen der Scaneinst
Konfigurieren von Einstellungen für die E-Mail-/I-Fax-Kommunikation Konfigurieren des Geräts für das Speichern gescannter Dokumente in gemeinsamen Ordnern Festlegen eines gemeinsamen Ordners als Speicherort Konfigurieren des Geräts für das Speichern gescannter Dokumente auf FTP-Servern Konfigurieren des PASV-Modus für FTP Konfigurieren des Geräts für die Netzwerkumgebung Konfigurieren von Etherneteinstellungen Ändern der maximalen Übertragungseinheit Einstellen einer Wartezeit für die Netzwerkverbindung Kon
Verifizieren von Schlüsselpaaren und digitalen Zertifikaten Verwenden von Remote UI Starten von Remote UI Remote UI-Bildschirme Verwalten von Dokumenten und Anzeigen des Gerätestatus Einstellen von Menüoptionen über Remote UI Speichern/Laden gespeicherter Daten Speichern von Einstellungsdaten Laden von Einstellungsdaten Speichern des Adressbuchs über Remote UI Liste der Menüeinstellungen Netzwerkeinstellungen Präferenzen Timereinstellungen Allgemeine Einstellungen Kopiereinstellungen Faxeinstellungen (MF729
Justieren der Werte für die Textfarbenreproduzierbarkeit in Farbdokumenten Drucken von Berichten und Listen SE Ergebnisbericht Bericht Kommunikationsverwaltung EM Ergebnisbericht Bericht Verwaltung Abteilungs-ID Adressbuchliste Anwenderdatenliste/Datenliste Systemmanager Liste IPSec Richtlinie Statusbericht für Verbrauchsmaterial Fontliste PCL (MF729Cx / MF728Cdw / MF724Cdw) Fontliste PS (MF729Cx / MF728Cdw / MF724Cdw) Anzeigen des Zählerwerts Verwenden eines USB-Speichergeräts zum Exportieren/Importieren v
Hinweise Kontakt 740 744 㻥㻌㻛㻌㻣㻠㻠
0W5F-000 Wichtige Sicherheitsvorschriften In diesem Kapitel wird beschrieben, wie Sie Sachschäden und Verletzungen bei den Benutzern des Geräts und anderen Personen vermeiden können. Lesen Sie dieses Kapitel vor der Inbetriebnahme des Geräts durch, und befolgen Sie die Anweisungen für die ordnungsgemäße Verwendung. Bedienen und verwenden Sie das Gerät ausschließlich wie in dieser Anleitung beschrieben.
0W5F-001 Aufstellung Lesen Sie die folgenden Sicherheitshinweise sorgfältig durch, und stellen Sie das Gerät an einem geeigneten Ort auf, sodass Sie es sicher und komfortabel verwenden können.
Schlecht belüftete Aufstellorte vermeiden Das Gerät erzeugt im normalen Betrieb eine geringe Menge Ozon u. Ä. Die Menge ist nicht gesundheitsschädlich, doch einige Menschen reagieren unter Umständen empfindlich auf Ozon u. Ä. Bei längerem Gebrauch oder langen Produktionszyklen können Ozon u. Ä. verstärkt bemerkbar werden, insbesondere in schlecht belüfteten Räumen. Der Raum, in dem das Gerät betrieben wird, sollte ausreichend gelüftet werden, um für ein angenehmes Arbeitsumfeld zu sorgen.
0W5F-002 Stromversorgung Das Gerät ist mit einer Spannung von 220 bis 240 V und einer Netzfrequenz von 50/60 Hz kompatibel. Schließen Sie das Gerät ausschließlich an einen Netzanschluss mit der angegebenen Netzspannung an. Andernfalls besteht Feuergefahr oder die Gefahr eines elektrischen Schlags. Verwenden Sie ausschließlich das mitgelieferte Netzkabel. Andernfalls besteht Feuergefahr oder die Gefahr eines elektrischen Schlags.
0W5F-003 Handhabung Trennen Sie umgehend den Netzstecker von der Netzsteckdose, und wenden Sie sich an einen autorisierten Canon Händler, wenn von dem Gerät ungewöhnliche Geräusche oder Gerüche ausgehen oder es zu Rauch- oder übermäßiger Wärmeentwicklung kommt. Bei fortgesetztem Betrieb kann es zu Feuer oder einem elektrischen Schlag kommen. Zerlegen und modifizieren Sie das Gerät nicht.
Dieses Gerät ist als Laserprodukt der Klasse 1 gemäß IEC60825-1: 2007 (EN60825-1: 2007) klassifiziert. Der Laserstrahl kann für Menschen schädlich sein. Da der Laserstrahl in der Lasereinheit durch eine Abdeckung vollständig verschlossen ist, kann die Laserstrahlung während des normalen Gerätebetriebs nicht nach außen dringen. Lesen Sie die folgenden Bemerkungen und Sicherheitshinweise. Öffnen Sie nur die Abdeckungen, die Sie laut diesem Handbuch öffnen dürfen.
0W5F-004 Wartung und Überprüfung Reinigen Sie das Gerät regelmäßig. Wenn sich Staub ansammelt, funktioniert das Gerät möglicherweise nicht ordnungsgemäß. Beachten Fehlerbehebung Sie beim Reinigen die folgenden Anweisungen. Wenn während des Betriebs ein Problem auftritt, schlagen Sie in nach. Wenn Sie das Problem nicht beheben können oder der Meinung sind, dass eine Überprüfung erforderlich ist, schlagen Sie in Wenn sich ein Problem nicht beheben lässt nach.
0W5F-005 Verbrauchsmaterial Entsorgen Sie gebrauchte Tonerpatronen nicht durch Verbrennen. Lagern Sie Tonerpatronen oder Papier nicht in der Nähe offener Flammen. Ansonsten können sich Toner oder Papier entzünden, und es besteht Verbrennungs- oder Feuergefahr. Wenn Toner versehentlich verschüttet oder verstreut wird, kehren Sie die Tonerpartikel vorsichtig zusammen oder nehmen Sie die Tonerpartikel mit einem weichen, angefeuchteten Tuch auf, und achten Sie darauf, dass Sie den Tonerstaub nicht einatmen.
Lagerung von Tonerpatronen Lagern Sie Patronen unter folgenden Umgebungsbedingungen, um einen sicheren Gebrauch und hohe Qualität sicherzustellen. Temperatur bei Lagerung: 0 bis 35°C Luftfeuchtigkeit bei Lagerung: 35 bis 85 % relative Luftfeuchtigkeit (nicht kondensierend) * Öffnen Sie die Schutzhülle erst, wenn Sie die Tonerpatrone benötigen.
0W5F-006 Grundfunktionen In diesem Kapitel werden die häufig ausgeführten Grundfunktionen wie beispielsweise die Verwendung des Bedienfelds oder das Einlegen von Papier und Dokumenten beschrieben. Teile und ihre Funktionen In diesem Abschnitt werden die äußeren und inneren Bauteile des Geräts und ihre Funktionen sowie die Tasten auf dem Bedienfeld und Teile und ihre Funktionen die Anzeigen im Display erläutert. Verwendung des Displays Bei dem Display handelt es sich um ein Touchpaneldisplay.
Einlegen von Papier In diesem Abschnitt wird beschrieben, wie Sie Papier in die Papierkassette und die manuelle Zufuhr einlegen. Einlegen von Papier Speichern von Daten im Adressbuch In diesem Abschnitt wird beschrieben, wie Sie Empfänger für das Senden von Faxen oder gescannten Dokumenten speichern.
0W5F-007 Teile und ihre Funktionen In diesem Abschnitt werden die Teile des Geräts (außen an der Vorder- und Rückseite sowie innen) und ihre Funktionsweise beschrieben. Neben den bei Grundfunktionen wie dem Einlegen von Dokumenten und Papier und dem Austauschen der Tonerpatronen wichtigen Teilen werden dabei auch die Tasten auf dem Bedienfeld und die Anzeigen im Display erläutert. Außerdem finden Sie in diesem Abschnitt Tipps zum ordnungsgemäßen Gebrauch des Geräts.
0W5F-008 Vorderseite MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn Zufuhr Führt dem Gerät automatisch Dokumente für das Scannen zu. Wenn zwei oder mehr Blätter in die Zufuhr eingelegt werden, können die Dokumente fortlaufend gescannt werden. Einlegen von Dokumenten Bedienfeld Das Bedienfeld enthält Tasten wie die Zahlentasten und die Taste [Start], ein Display und Statusanzeigen. Sie können über das Bedienfeld alle Funktionen ausführen und Einstellungen vornehmen.
Transportführung für die manuelle Zufuhr Senken Sie bei einem Papierstau in der manuellen Zufuhr die Transportführung für die manuelle Zufuhr, um das gestaute Papier zu entfernen. Beheben von Dokumenten- und Papierstaus Vorlagenglas Legen Sie zu scannende Dokumente auf das Vorlagenglas. Legen Sie auch dicke oder gebundene Dokumente wie Bücher, die nicht in die Zufuhr eingelegt werden können, auf das Vorlagenglas. Einlegen von Dokumenten USB-Anschluss (USB2.
0W5F-009 Rückseite MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn USB-Anschluss (USB2.0) Schließen Sie hier ein USB-Kabel an, wenn Sie das Gerät mit einem Computer verbinden. LAN-Anschluss Schließen Sie hier ein LAN-Kabel an, wenn Sie das Gerät über Kabel mit einem LAN-Router o. Ä. verbinden. Verbindung zu einem Wired LAN Herstellen einer USB-Anschluss (USB1.1) (MF729Cx / MF728Cdw / MF724Cdw) Schließen Sie an diesen Anschluss Geräte wie eine USB-Tastatur eines Drittanbieters an.
0W5F-00A Innen MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn Tonerpatronenfach Setzen Sie die Tonerpatronen Y (Gelb), M (Magenta), C (Cyan) und K (Schwarz) der Reihe nach von hinten nach vorne in die Vertiefungen ein.
0W5F-00C Manuelle Zufuhr MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn Papierführungen Stellen Sie die Papierführungen genau auf die Breite des eingelegten Papiers ein, damit das Papier gerade in das Gerät eingezogen wird. Papierfach (MF729Cx / MF728Cdw / MF724Cdw) Ziehen Sie beim Einlegen von Papier das Papierfach heraus. Fachverlängerung (MF729Cx / MF728Cdw / MF724Cdw) Öffnen Sie beim Einlegen von Papier die Fachverlängerung.
0W5F-00E Papierkassette MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn Papierführungen Stellen Sie die Papierführungen genau auf das Format des eingelegten Papiers ein, damit das Papier gerade in das Gerät eingezogen wird. Drücken Sie dazu die in den Abbildungen mit einem Pfeil markierten Entriegelungshebel, um die Sperre aufzuheben, und verschieben Sie die Papierführungen.
0W5F-00F Bedienfeld Die Abbildung oben zeigt das Bedienfeld des MF729Cx. Welche Tasten oder Funktionen zur Verfügung stehen, hängt vom Modell ab Taste [Startseite] Durch Drücken dieser Taste zeigen Sie den Bildschirm an, über den Sie Zugriff auf das Einstellungsmenü und auf Funktionen wie das Kopieren und Scannen erhalten. Anpassen des Bildschirms Display Sie können den Fortschritt von Kopieraufträgen, Faxaufträgen und anderen Aufträgen sowie den Fehlerstatus anzeigen.
Drucken von Bildern von einem USB-Speichergerät mit dieser Taste starten. Taste [ID] Drücken Sie nach dem Eingeben von ID und PIN zum Anmelden diese Taste, wenn die Verwaltung per Abteilungs-IDs aktiviert ist. Nach dem Gebrauch des Geräts drücken Sie diese Taste erneut, um sich abzumelden. Anmelden am Gerät Taste [Start] (Schwarzweiß) Mit dieser Taste scannen oder kopieren Sie Dokumente in Schwarzweiß.
0W5F-00H Display Der Bildschirm oder der Einstellungsbildschirm wird auf dem Display angezeigt, sodass Sie Funktionen wie das Kopieren oder Scannen initiieren können. Sie können auf dem Display auch Informationen überprüfen, wie Fehlermeldungen und den Betriebsstatus des Geräts. Bei dem Display handelt es sich zudem um ein Touchpanel, sodass Sie Vorgänge durch direktes Berühren des Displays durchführen können.
verbliebenen Toners usw.) und die Netzwerkeinstellungen, wie die IP-Adresse des Geräts, überprüfen. Zeigt Details zu allen aufgetretenen Fehlern an. Wenn eine Fehlermeldung erscheint Zeigt den Gerätestatus an, wie die Papiermenge und die Menge des in den Tonerpatronen verbliebenen Toners. Zeigt an, ob Papier in die einzelnen Papierquellen eingelegt ist.
Bildschirm (MF729Cx) Wenn Sie ( ) drücken, wird der Bildschirm angezeigt. Auf diesem Bildschirm können Sie die Zählerwerte von Ausdrucken sowie die Seriennummer des Geräts und die Gerätekonfiguration anzeigen. Zeigt die Seriennummer des Geräts und die Liste der Ausstattung an, die angebracht oder aktiviert ist. Zähler Wählen Sie den Zähler zur Überprüfung des Zählerwertes aus.
0W5F-00J Anpassen des Bildschirms Sie können Schnellschaltflächen, die auf dem Bildschirm angezeigt werden, entsprechend Ihrer Anwendung oder einer bevorzugten Anordnung hinzufügen oder löschen. Sie können auch die Reihenfolge ändern, in der die Schnellschaltflächen angezeigt werden.
Zum Entfernen einer gespeicherten Schaltfläche deaktivieren Sie das Kontrollkästchen für die Einstellungen in der Schaltfläche, die Sie entfernen wollen, und tippen Sie dann auf . Nach dem Entfernen einer gespeicherten Schaltfläche befindet sich auf dem Bildschirm an der Stelle, an der die Schaltfläche angezeigt wurde, eine Lücke. Löschen Sie Einfügen einer Lücke gegebenenfalls die Lücke. 5 Lesen Sie die angezeigte Meldung, und tippen Sie auf .
4 Tippen Sie auf oder . Die Schaltfläche wird so oft versetzt wie Sie darauf getippt haben. Durch ein längeres Berühren von / wird die Schaltfläche kontinuierlich versetzt. 5 Tippen Sie auf . Einfügen einer Lücke Damit die Anzeige auf dem Bildschirm übersichtlicher wird, können Sie Lücken anstelle von Schaltflächen einfügen. 1 Drücken Sie , und tippen Sie auf .
LINKS Display 㻟㻢㻌㻛㻌㻣㻠㻠
0W5F-00K Verwendung des Displays Bei dem Display handelt es sich um ein Touchpanel, bei dem die Bedienung direkt auf dem Bildschirm erfolgt. Vermeiden Sie die folgenden Aktionen. Das Display funktioniert möglicherweise nicht mehr korrekt oder es wird beschädigt. Festes Drücken Drücken mit spitzen Gegenständen (Fingernagel, Kugelschreiber, Bleistift usw.
Wenn ein Element versehentlich berührt wird Schieben Sie Ihren Finger weg, und lassen Sie ihn dann vom Bildschirm los, um die Auswahl abzubrechen. So kehren Sie zum vorherigen Bildschirm zurück Drücken Sie , um zum vorherigen Bildschirm zurückzukehren. Bildlauf auf dem Bildschirm Auf dem Bildschirm wird die Bildlaufleiste angezeigt, wenn es weitere Informationen gibt, die nicht angezeigt werden.
Tippen Sie auf / , um die Einstellung auf der Skala anzupassen. Sie können eine Einstellung auch anpassen, indem Sie den Schieberegler nach links oder rechts wischen. Sie können eine Vielzahl von Einstellungen für die Anzeige auf dem Bildschirm vornehmen, beispielsweise die Scrollgeschwindigkeit oder die Anzeigesprache ändern.
0W5F-00L Eingeben von Text Geben Sie Text und Werte über das Display und die Zahlentasten ein. Wechseln des Zeichentyps Tippen Sie auf , um den Zeichentyp für die Eingabe zu wechseln. Der zurzeit ausgewählte Zeichentyp wird durch "A", "a" oder "12" oben und rechts neben dem Texteingabefeld angezeigt. Sie können auch drücken, um den Zeichentyp zu wechseln. Typen von Zeichen, die eingegeben werden können Der Text, der eingegeben werden kann, ist im Folgenden aufgeführt. Taste A a 12 @.
Verschieben des Cursors (Eingeben eines Leerzeichens) Tippen Sie auf oder , um den Cursor zu versetzen. Zum Eingeben eines Leerzeichens stellen Sie den Cursor an das Ende des . Textes, und tippen Sie auf Beispiel für das Eingeben von Text und Zahlen Beispiel: "Canon-1" 1 Tippen Sie so oft auf , bis ausgewählt ist. 2 Drücken Sie 3 Tippen Sie so oft auf , bis ausgewählt ist. 4 Drücken Sie so oft, bis der Buchstabe "a" ausgewählt ist.
0W5F-00R Anmelden am Gerät Wenn die Verwaltung per Abteilungs-IDs oder die Systemmanager-IDs aktiviert sind, müssen Sie sich vor Verwendung des Geräts anmelden. Sie müssen sich auch anmelden, wenn die Verwendung der Fax- und Scanfunktionen eingeschränkt ist. Anmeldung bei Verwaltung per Abteilungs-ID Anmelden für Autorisiertes Senden Anmeldung bei Verwaltung per Abteilungs-ID Wenn der Anmeldebildschirm angezeigt wird, gehen Sie folgendermaßen vor, um die Abteilungs-ID und PIN einzugeben.
für das Autorisierte Senden angezeigt, wenn die Fax- oder Scanfunktion verwendet wird. 1 2 3 Geben Sie Ihren Benutzernamen ein. 1 Tippen Sie auf . 2 Geben Sie mit den Zahlentasten Ihren Benutzernamen ein, tippen Sie auf . Geben Sie das Passwort ein. 1 Tippen Sie auf . 2 Geben Sie mit den Zahlentasten das Passwort ein, tippen Sie auf . Tippen Sie auf , und wählen Sie den Server für Ihre Authentifizierung aus.
LINKS Einstellen der Verwaltung per Abteilungs-IDs Einstellen der Systemmanager-ID 㻠㻠㻌㻛㻌㻣㻠㻠
0W5F-00S Einlegen von Dokumenten Legen Sie Dokumente auf das Vorlagenglas und in die Zufuhr. Verwenden Sie zum Scannen dicker oder gebundener Dokumente wie Bücher das Vorlagenglas. Sie können zwei oder mehr Blätter in die Zufuhr einlegen, damit sie fortlaufend gescannt werden können. Weitere Informationen zu den Dokumententypen, die auf das Vorlagenglas oder in die Zufuhr gelegt werden können, sowie Informationen Dokumententypen oder Scanbereich.
2 Richten Sie die Ecke des Dokuments an der linken oberen Ecke des Vorlagenglases aus. Um transparente Dokumente zu scannen (zum Beispiel Transparentpapier oder Folien), bedecken Sie sie mit normalem weißen Papier. 3 Schließen Sie die Zufuhr vorsichtig. Das Gerät ist damit zum Scannen des Dokuments bereit. Wenn das Scannen abgeschlossen ist, nehmen Sie das Dokument vom Vorlagenglas herunter. Einlegen von Dokumenten in die Zufuhr 1 Schieben Sie die Dokumentenführungen auseinander.
Legen Sie nicht gleichzeitig Dokumente in verschiedenen Formaten ein. Sie können bis zu 50 Blätter auf einmal einlegen. Wenn 51 oder mehr Blätter eingelegt werden, stoppt der Scanvorgang möglicherweise, oder es kann zu einem Papierstau kommen. 4 Richten Sie die Dokumentenführungen an den Kanten des Dokuments aus. Schieben Sie die Dokumentenführungen nach innen, bis sie eng an den Kanten des Dokuments anliegen. Das Gerät ist damit zum Scannen des Dokuments bereit.
0W5F-00U Einlegen von Papier Sie können Papier in die Papierkassette oder die manuelle Zufuhr einlegen. Legen Sie das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Die Papierkassette ist praktisch für große Papiermengen. Verwenden Sie die manuelle Zufuhr, wenn Sie vorübergehend Papier eines anderen Formats oder Typs als in der Papierkassette verwenden. Informationen zu den verfügbaren Papier.
Papiertyp Papiereinstellung am Gerät Papiergewicht 60 bis 74 g/m² *1 70 bis 84 g/m² *1 75 bis 90 g/m² *2 Recyclingpapier 60 bis 74 g/m² Farbiges Papier 60 bis 74 g/m² 85 bis 120 g/m² 121 bis 163 g/m² Normalpapier *2 Schweres Papier Karteikarte *3 Briefumschlag 100 bis 110 g/m² 111 bis 130 g/m² 131 bis 160 g/m² 161 bis 220 g/m²
Lagern Sie das Papier nicht in direktem Sonnenlicht oder an einem Ort, an dem es hoher Luftfeuchtigkeit, Trockenheit oder starken Schwankungen der Temperatur oder Luftfeuchtigkeit ausgesetzt ist. Beim Bedrucken von feuchtem Papier Aus dem Papierausgabebereich kann Wasserdampf austreten, und auf der Rückseite des Bedienfelds oder um den Papierausgabebereich können sich Wassertröpfchen bilden.
0W5F-00W Einlegen von Papier in die Papierkassette Legen Sie das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Wenn Sie auf Papier drucken wollen, das nicht in der Einlegen von Papier in die manuelle Zufuhr Papierkassette eingelegt ist, legen Sie das Papier in die manuelle Zufuhr. Papier unbedingt hochkant einlegen Sie können Papier nicht quer einlegen. Legen Sie das Papier wie in den Abbildungen unten dargestellt unbedingt hochkant ein.
3 Legen Sie das Papier so ein, dass der Papierstapel an der Rückwand der Papierkassette anliegt. Legen Sie das Papier hochkant (mit der kurzen Seite zum Gerät hin) und mit der zu bedruckenden Seite nach oben weisend ein. Sie können Papier nicht quer einlegen. Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten auszurichten.
Bei A5-Papier wird die Rückseite möglicherweise nicht richtig bedruckt.
0W5F-00X Einlegen von Papier in die manuelle Zufuhr Wenn Sie auf Papier drucken wollen, das nicht in der Papierkassette eingelegt ist, legen Sie das Papier in die manuelle Zufuhr. Legen Sie Einlegen von Papier in die Papierkassette das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Beim MF729Cx / MF728Cdw / MF724Cdw Beim MF628Cw / MF623Cn Papier unbedingt hochkant einlegen Sie können Papier nicht quer einlegen.
4 Schieben Sie das Papier bis zum Anschlag in die manuelle Zufuhr ein. Legen Sie das Papier hochkant (mit der kurzen Seite zum Gerät hin) und mit der zu bedruckenden Seite nach oben weisend ein. Sie können Papier nicht quer einlegen. Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten auszurichten.
Beim MF628Cw / MF623Cn Papierkassette unbedingt immer einsetzen Das Gerät druckt nur, wenn die Papierkassette eingesetzt ist, selbst wenn Papier in die manuelle Zufuhr eingelegt wird. Eine Fehlermeldung wird angezeigt, wenn Sie versuchen, ohne Papierkassette zu drucken. WICHTIG:Immer nur ein Blatt Papier auf einmal einlegen Sie können zum Drucken immer nur ein Blatt Papier einlegen. 1 Schieben Sie die Papierführungen auseinander. Schieben Sie die Papierführungen nach außen.
Papier in die Papierkassette) bzw. in die manuelle Zufuhr ein. Wenn Sie die manuelle Zufuhr verwenden, legen Sie immer nur ein Blatt Papier ein. Sie können nur mit diesem Gerät bedrucktes Papier verwenden. Sie können nicht auf die Seite drucken, die zuvor schon bedruckt wurde. Wenn der Ausdruck blass ist, setzen Sie in je nach verwendeter Papierquelle die Option , oder auf .
0W5F-00Y Einlegen von Briefumschlägen Achten Sie darauf, Briefumschläge vor dem Einlegen gegebenenfalls flachzudrücken. Beachten Sie außerdem die Ausrichtung der Briefumschläge und die nach oben weisende Seite. Vorbereitungen für das Einlegen von Briefumschlägen In der Papierkassette In der manuellen Zufuhr In diesem Abschnitt wird beschrieben, wie Sie Briefumschläge in der gewünschten Ausrichtung einlegen und welche Schritte Sie vor dem Einlegen von Briefumschlägen ausführen müssen.
In der Papierkassette Legen Sie die Briefumschläge Monarch (MF628Cw / MF623Cn), COM10, DL oder ISO-C5 hochkant (mit den langen Seiten an der Seite) und mit der klebstofffreien Seite (Vorderseite) nach oben weisend ein. Sie können die Rückseite von Briefumschlägen nicht bedrucken. Briefumschläge im Format Monarch können Sie am MF729Cx / MF728Cdw / MF724Cdw nicht in die Papierkassette einlegen. Legen Sie sie in die manuelle Zufuhr ein.
0W5F-010 Einlegen von bereits bedrucktem Papier Wenn Sie Papier verwenden, das bereits mit einem Logo bedruckt wurde, achten Sie auf die Ausrichtung des Papiers, wenn Sie es einlegen. Legen Sie das Papier ordnungsgemäß ein, sodass der Druck auf der richtigen Seite des Papiers mit Logo erfolgt.
Drucken auf querformatigem Papier mit Logos Die Einstellung (MF729Cx / MF728Cdw / MF724Cdw) Wenn Sie auf bereits bedrucktes Papier drucken, müssen Sie bei jedem Wechsel zwischen einseitigem und doppelseitigem Ausdruck beachten, mit welcher Seite nach oben das Papier eingelegt werden muss.
0W5F-011 Angeben von Papierformat und -typ Sie müssen die Einstellungen für Papierformat und Papiertyp entsprechend dem eingelegten Papier vornehmen. Achten Sie darauf, die Papiereinstellungen zu ändern, wenn Sie Papier einlegen, das sich vom zuvor eingelegten Papier unterscheidet. Wenn die Einstellung nicht mit dem Format und dem Typ des eingelegten Papiers übereinstimmt, kann es zu einem Papierstau oder Druckfehler kommen.
0W5F-012 Angeben von Format und Typ des Papiers in der Papierkassette 1 Drücken Sie 2 Tippen Sie auf oder . , und tippen Sie auf . wird nur angezeigt, wenn die optionale Papierkassette (Kassette 2) installiert ist. (MF729Cx / MF728Cdw / MF724Cdw) 3 Wählen Sie das Papierformat. Wenn das Format des eingelegten Papiers nicht angezeigt wird, tippen Sie auf . 4 Wählen Sie den Papiertyp aus.
0W5F-013 Angeben von Format und Typ des Papiers in der manuellen Zufuhr Der hier abgebildete Bildschirm wird angezeigt, wenn Papier in die manuelle Zufuhr eingelegt wird. Nehmen Sie die Einstellungen nach den Bildschirmanweisungen und entsprechend dem Format und Typ des eingelegten Papiers vor.
4 2 Tippen Sie auf . Wählen Sie den Papiertyp aus.
0W5F-014 Speichern von Standardpapiereinstellungen für die manuelle Zufuhr Sie können Standardpapiereinstellungen für die manuelle Zufuhr speichern. Wenn Sie Standardeinstellungen speichern, brauchen Sie die Einstellungen nicht jedes Mal vorzunehmen, wenn Sie das gleiche Papier in die manuelle Zufuhr einlegen. Nach dem Speichern der Standardpapiereinstellungen wird der Bildschirm zum Einstellen des Papiers beim Einlegen von Papier nicht mehr angezeigt, und es wird immer dieselbe Einstellung verwendet.
2 Geben Sie die Länge der (kürzeren) -Achse der Seite an. Tippen Sie auf . Geben Sie die Länge der -Achse der Seite mit . 3 / oder mit den Zahlentasten ein, und tippen Sie auf Geben Sie die Länge der (längeren) -Achse der Seite an. Tippen Sie auf . Geben Sie die Länge der -Achse der Seite ein, und tippen Sie auf . 4 5 Tippen Sie auf . Wählen Sie den Papiertyp aus.
0W5F-015 Speichern eines anwenderdefinierten Papierformats Sie können bis zu drei häufig verwendete anwenderdefinierte Papierformate speichern. 1 Drücken Sie 2 Tippen Sie auf . 3 Tippen Sie auf . , und tippen Sie auf . Wenn bereits Einstellungen für die Papierformate <1> bis <3> gespeichert wurden, ändern oder löschen Sie die Einstellungen, um fortzufahren.
4 Geben Sie das Papierformat an. 1 Geben Sie die Länge der (kürzeren) -Achse der Seite an. Tippen Sie auf . Geben Sie die Länge der -Achse der Seite mit . 2 / oder mit den Zahlentasten ein, und tippen Sie auf Geben Sie die Länge der (längeren) -Achse der Seite an. Tippen Sie auf . Geben Sie die Länge der -Achse der Seite ein, und tippen Sie auf . 3 5 Tippen Sie auf . Wählen Sie den Papiertyp aus.
Die gespeicherten Papierformate werden angezeigt, wenn Sie die Standardpapiereinstellungen für die manuelle Zufuhr festlegen. Sie können auf dem Bildschirm eins der angezeigten Formate als Standardpapierformat für die manuelle Zufuhr auswählen.
0W5F-016 Einschränken der angezeigten Papierformate Sie können sicherstellen, dass nur häufig verwendete Papierformate auf dem Bildschirm zur Auswahl der Papierformateinstellung angezeigt werden. 1 Drücken Sie 2 Tippen Sie auf . 3 Tippen Sie auf , oder . , und tippen Sie auf . wird nur angezeigt, wenn die optionale Papierkassette (Kassette 2) installiert ist.
0W5F-017 Speichern von Daten im Adressbuch Sie können häufig verwendete Empfänger im Adressbuch speichern und bei Bedarf mühelos auswählen. Sie können bis zu 300 Empfänger im Adressbuch speichern. Sie können die Empfänger alphabetisch in Listen im Adressbuch suchen, oder Sie können eine dreistellige Nummer (Nummer für kodierte Wahl) eingeben. Außerdem können Sie die Empfänger mit den folgenden Funktionen besonders schnell angeben.
0W5F-018 Speichern von Empfängern im Adressbuch Sie können bis zu 281 Empfänger für die kodierte Wahl im Adressbuch speichern. Sie können gespeicherte Empfänger bearbeiten oder Speichern des Adressbuchs über Remote UI löschen. 1 Drücken Sie 2 Tippen Sie auf . , und tippen Sie auf .
Wenn in einem Bild, das gesendet wird, ein Fehler auftritt, wird der Fehler überprüft und korrigiert, um zu verhindern, dass ein nicht korrektes Bild gesendet wird, wenn die Einstellung lautet. Wenn der Start der Übertragungen einige Zeit dauert, z. B. bei einer schlechten Telefonverbindung, können Sie die Startgeschwindigkeit für die Übertragung ab "33600 bps" in Schritten nach unten anpassen.
Löschen eines gespeicherten Empfängers 1 2 3 4 Drücken Sie , und tippen Sie auf . Tippen Sie auf . Wählen Sie die Registerkarte mit dem zu löschenden Empfänger aus, und wählen Sie den Empfänger aus. Tippen Sie auf . Wenn ein Bildschirm angezeigt wird, in dem Sie zum Eingeben einer PIN aufgefordert werden, geben Sie mit den Zahlentasten Festlegen einer PIN für das Adressbuch die richtige PIN ein, und tippen Sie auf . 5 Tippen Sie auf .
0W5F-019 Speichern von Empfängern als Favoriten Sie können die am häufigsten verwendeten Empfänger als Favoriten im Adressbuch speichern. Nach dem Speichern können Empfänger bearbeitet oder gelöscht werden. Sie können bis zu 19 Empfänger als Favoriten speichern. Favoriten wird keine dreistellige Nummer zugewiesen. 1 Drücken Sie 2 Tippen Sie auf . , und tippen Sie auf .
9 Tippen Sie auf . Bearbeiten der Angaben für als Favoriten gespeicherte Empfänger Nach dem Speichern von Empfängern können Sie die Angaben für die Empfänger wie Nummer, Name und Typ ändern. 1 2 3 4 Drücken Sie , und tippen Sie auf . Tippen Sie auf < >. Tippen Sie auf , und wählen Sie den zu bearbeitenden Empfänger aus. Tippen Sie auf .
5 㻣㻤㻌㻛㻌㻣㻠㻠
0W5F-01A Speichern mehrerer Empfänger für die Gruppenwahl Sie können mehrere Empfänger in Gruppen zusammenfassen. Sie können bis zu 299 Empfänger (100 Empfänger bei E-Mails) für eine Gruppe speichern. Wenn Sie eine Gruppe gespeichert haben, können Sie Empfänger hinzufügen oder löschen. 1 Drücken Sie 2 Tippen Sie auf . , und tippen Sie auf .
Bearbeiten der Angaben für gespeicherte Gruppen Nach dem Speichern von Empfängern können Sie die Angaben für die Gruppen wie Name, Empfänger und Nummer für die kodierte Wahl ändern. 1 2 3 4 Drücken Sie , und tippen Sie auf . Tippen Sie auf . Tippen Sie auf < >, und wählen Sie den zu ändernden Empfänger aus. Tippen Sie auf .
0W5F-01C Einstellen der Lautstärke Das Gerät gibt in einer Vielzahl von Situationen Signaltöne aus, beispielsweise am Ende des Sendens von Faxen oder bei einem Papierstau oder Fehler. Sie können die Lautstärke der einzelnen Signaltöne getrennt einstellen. Einstellen von 1 2 Drücken Sie die Taste ( ). Zum Ändern der tippen Sie auf / , und tippen Sie auf . Sie können die Lautstärke auch durch Wischen des Schiebereglers anpassen.
Original in Zufuhr> Signalton beim Einlegen eines Originals in die Zufuhr * Wird nur für Modell MF729Cx / MF728Cdw / MF628Cw angezeigt 3 Stellen Sie mit Tippen Sie auf / die Lautstärke ein, und tippen Sie auf . , und setzen Sie den Cursor ganz nach links, um den Ton stumm zu schalten. Endton nur für Fehler Tippen Sie auf .
0W5F-01E Wechseln in den Schlafmodus Im Schlafmodus wird der Energieverbrauch des Geräts gesenkt, indem die Stromversorgung des Bedienfelds deaktiviert wird. Wenn am Gerät längere Zeit keine Funktionen ausgeführt werden, beispielsweise während der Mittagspause, können Sie Strom sparen, indem Sie auf dem Bedienfeld drücken.
Wenn ein optionaler Hörer oder ein externes Telefon angeschlossen ist, beendet das Gerät den Schlafmodus, wenn Sie den Hörer abnehmen.
0W5F-01F Einstellen der Zeit bis zum automatischen Abschalten Sie können das Gerät so einstellen, dass es sich nach einer bestimmten Zeit automatisch ausschaltet. Das Gerät schaltet sich automatisch AUS, wenn nach dem Wechsel in den Schlafmodus die angegebene Zeit lang keine Funktion ausgeführt wurde. Wenn Sie vergessen haben, das Gerät auszuschalten, wird auf diese Weise über Nacht oder an arbeitsfreien Tagen der Stromverbrauch gestoppt.
0W5F-01H Kopieren In diesem Kapitel werden die grundlegenden Kopierfunktionen sowie weitere nützliche Funktionen wie das doppelseitige Kopieren und das Kopieren beider Seiten einer Ausweiskarte auf eine Seite beschrieben.
0W5F-01J Grundlegende Kopierfunktionen 1 Legen Sie das Dokument oder die Dokumente ein. 2 Drücken Sie 3 Geben Sie mit den Zahlentasten die Anzahl an Kopien ein. Einlegen von Dokumenten , und tippen Sie auf . Geben Sie eine Menge zwischen 1 und 999 ein. Drücken Sie 4 , wenn Sie die eingegebene Menge löschen möchten. Legen Sie die gewünschten Kopiereinstellungen fest. Tippen Sie auf das Element, das Sie festlegen wollen. 5 Drücken Sie Verschiedene Kopiereinstellungen .
1 Wählen Sie das Dokumentenformat aus. 2 Wählen Sie die Papierzufuhr aus, die das gewünschte Papier enthält. Wenn kein Bildschirm angezeigt wird, fahren Sie mit Schritt 3 fort. 3 Legen Sie das nächste Dokument auf das Vorlagenglas, und drücken Sie . Wiederholen Sie diesen Schritt, bis alle gewünschten Dokumente gescannt wurden. 4 Tippen Sie auf . Wenn die Meldung oder
0W5F-01K Auswählen von Kopierpapier Geben Sie die Papierquelle an, die das gewünschte Papier enthält, das zum Drucken der Kopien verwendet werden soll. Sie müssen zunächst Format und Typ des in die Papierquelle eingelegten Papiers angeben. Angeben von Papierformat und -typ Einlegen von Papier Wählen Sie die Papierquelle ( , MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn < > Wählt das in die manuelle Zufuhr eingelegte Papier. < > Wählt das in die Kassette eingelegte Papier.
0W5F-01L Abbrechen des Kopierens Wenn Sie das Kopieren unmittelbar nach dem Drücken der Taste abbrechen möchten, tippen Sie auf dem Bildschirm auf . Sie können auch zunächst den Kopierstatus prüfen und dann das , oder drücken Sie auf dem Bedienfeld die Taste Kopieren abbrechen.
LINKS Grundlegende Kopierfunktionen 㻥㻝㻌㻛㻌㻣㻠㻠
0W5F-01R Verschiedene Kopiereinstellungen Sie können ganz nach Bedarf eine Vielzahl von Einstellungen auswählen, mit denen Sie beispielsweise Papier sparen oder die Dokumente besser lesbar machen können.
0W5F-01S Vergrößern oder Verkleinern Sie können zum Vergrößern oder Verkleinern von Kopien einen voreingestellten Kopierfaktor wie A4> auswählen oder in Schritten von 1 % einen anwenderdefinierten Kopierfaktor einstellen. Wählen Sie den Kopierfaktor Tippen Sie auf / , oder verwenden Sie die Zahlentasten, um den Kopierfaktor einzugeben, und tippen Sie auf .
0W5F-01U Auswählen von Dokumententypen Sie können die optische Bildqualität für die Kopie abhängig vom Dokumententyp auswählen, wie zum Beispiel Nur-Text-Dokumente, Dokumente mit Diagrammen und Grafiken oder Zeitschriftenfotos. Wählen Sie den Dokumententyp Geeignet für das Kopieren von Dokumenten mit Text und Fotos oder Dokumenten, die detaillierte Zeichnungen enthalten, wie Karten.
0W5F-01W Justieren der Dichte Sie können die Dichte der Kopie justieren, wenn Text oder Bilder in einem Dokument zu hell oder zu dunkel sind. Sie können auch den Hintergrund anpassen, wenn Sie bei Dokumenten mit heller oder gelblicher Hintergrundfarbe die Hintergrundfarbe entfernen möchten. Justieren Sie beim Kopieren von auf dünnem Papier gedruckten Dokumenten wie Zeitungen die Dichte und den Hintergrund, damit Text und Bilder der Rückseite in der Kopie nicht sichtbar sind.
LINKS Grundlegende Kopierfunktionen Justieren der Farbabstimmung Justieren der Schärfe 㻥㻢㻌㻛㻌㻣㻠㻠
0W5F-01X Justieren der Farbabstimmung Justiert den Gelb-, Magenta-, Cyan- und Schwarzpegel. Wählen Sie die Farbe Justieren Sie den Farbpegel <-> Macht die ausgewählte Farbe heller. <+> Macht die ausgewählte Farbe dunkler. Optimieren Sie die Farben, indem Sie die Pegel der 3 Dichtebereiche für jede Farbe anpassen.
LINKS Grundlegende Kopierfunktionen Justieren der Dichte Justieren der Schärfe 㻥㻤㻌㻛㻌㻣㻠㻠
0W5F-01Y Justieren der Schärfe Sie können die Schärfe des kopierten Bildes anpassen. Erhöhen Sie die Schärfe, um verschwommenen Text und Linien schärfer darzustellen, oder senken Sie die Schärfe, um die Darstellung von Zeitschriftenfotos zu verbessern. Justieren Sie die Schärfe <-> Verringert die Schärfe und schwächt die Kontraste im Bild ab. Beispiel: Wenn Sie das Erscheinungsbild von Fotos aus Magazinen verbessern möchten <+> Erhöht die Bildschärfe.
0W5F-020 Doppelseitiges Kopieren Sie können zwei Seiten eines Dokuments auf beide Seiten des Papiers kopieren. Sie können auch ein zweiseitiges Dokument auf beide Seiten des Papiers oder auf zwei getrennte Seiten kopieren. <2-seitig> steht bei manchen Papierformaten und -typen möglicherweise nicht zur Verfügung. Papier <2-seitig> steht bei Verwendung von nicht zur Verfügung.
Wenn Sie Kopien mit einer anderen Bindung als das Original erstellen möchten <2-seitig->2-seitig> Wählen Sie die Ausrichtung des Originals Wählen Wählen Sie für die fertige Kopie einen anderen Bindungstyp als den des Sie den Bindungstyp des Originals Originals 2->1 Mit dieser Einstellung können Sie die Richtung des ausgegebenen Papiers ausrichten.
0W5F-021 Kopieren mehrerer Dokumente auf ein Blatt (2 auf 1/4 auf 1) Sie können zwei bis vier Dokumente verkleinert auf ein einziges Blatt kopieren. Dadurch verringert sich die Anzahl der Seiten, und Sie können Papier sparen. Mit <2 auf 1>/<4 auf 1> wird automatisch der Kopierfaktor reduziert (der Kopierfaktor wird im Bildschirm angezeigt). Sie drücken, aber die Ränder des Dokuments werden können den Kopierfaktor erhöhen oder weiter reduzieren, bevor Sie möglicherweise nicht kopiert, wenn Sie ihn erhöhen.
0W5F-022 Kopieren beider Seiten einer Ausweiskarte auf eine Seite Mit können Sie die Vorder- und Rückseite einer Karte auf eine Seite kopieren. Diese Funktion ist beim Kopieren von Führerscheinen oder Ausweisen hilfreich. steht bei Papier des Formats A4/Letter oder größer zur Verfügung. wird automatisch auf <100%> eingestellt. steht bei Verwendung von , <2-seitig> oder <2 auf 1>/<4 auf 1> nicht zur Verfügung.
0W5F-023 Löschen dunkler Ränder und Rahmenlinien (Rahmenlöschung) Wenn Sie Dokumente kopieren, die kleiner als das Ausgabepapierformat sind, werden möglicherweise an den Rändern des kopierten Bildes Rahmenlinien angezeigt. Wenn Sie gegenüberliegende Seiten eines dicken Buchs kopieren, können dunkle Kanten angezeigt werden. Mit können Sie diese Rahmenlinien und dunklen Kanten löschen. Die Breite des zu löschenden Rahmens vergrößert bzw.
0W5F-024 Sortieren von Kopien nach Seitenreihenfolge Setzen Sie auf , um beim Erstellen mehrerer Kopien mehrseitiger Dokumente die Kopien in Seitenreihenfolge zu sortieren. Diese Funktion ist nützlich, wenn Sie Handzettel für Besprechungen oder Präsentationen vorbereiten. Die Kopien werden seitenweise gruppiert und nicht sortiert.
0W5F-025 Anpassen der Kopiereinstellungen je nach Anforderungen Die Standardeinstellungen sind die Einstellungen, die immer dann angezeigt werden, wenn Sie das Gerät einschalten oder wenn Sie drücken. Wenn Sie Ihre häufig verwendeten Einstellungen als Standardeinstellungen registrieren, müssen Sie nicht jedes Mal die gleichen Einstellungen konfigurieren, wenn Sie Kopien erstellen. Außerdem können Sie Kombinationen mehrerer Kopiereinstellungen registrieren und bei Bedarf verwenden.
0W5F-026 Ändern von Standardeinstellungen Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Kopieren nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen.
0W5F-027 Registrieren häufig verwendeter Kopiereinstellungen Sie können bis zu vier häufig verwendete Kombinationen der Kopiereinstellungen speichern. Indem Sie eine gespeicherte Einstellungskombination bei Bedarf ganz einfach auswählen, müssen Sie nicht jedes Mal beim Erstellen von Kopien die gleichen Einstellungen konfigurieren, zum Beispiel wenn Sie häufig die Anzahl der Kopien auf 5 setzen, auf einstellen und die Schärfe beim Kopieren erhöhen.
Wenn Sie auswählen, wird eine Meldung angezeigt. Überprüfen Sie die Meldung, und tippen Sie dann auf . Die gespeicherte Einstellungskombination wird dem Bildschirm als Schnellschaltfläche hinzugefügt. Wenn der Bildschirm voll ist und die Schnellschaltfläche nicht hinzugefügt werden kann, löschen Sie gespeicherte Anpassen des Bildschirms Schaltflächen oder Lücken unter .
0W5F-028 Faxen Dieses Kapitel beschreibt Faxeinstellungen, grundlegende Faxbedienvorgänge und verschiedene andere praktische Funktionen für Ihren Bedarf, wie zum Beispiel das PC-Fax, um Dokumente direkt vom Computer zu senden, das Adressbuch, um ganz einfach Empfänger festzulegen, und die Weiterleitung, um Faxe auch dann zu erhalten, wenn Sie nicht im Büro sind. Faxfunktionen stehen nur beim Modell MF729Cx / MF728Cdw / MF628Cw zur Verfügung.
Angeben von auf einem LDAPServer gespeicherten Empfängern (Fax) Senden und Empfangen je nach Verwendungszweck Senden von Faxen nach einem Sprachanruf (manuelles Senden) Senden von Faxen an mehrere Empfänger gleichzeitig (Rundsendung) Faxempfang im Speicher (Speicherempfang) Weiterleiten von empfangenen Faxen Archivieren von gesendeten Faxen Empfangen von Faxinformationsdiensten Senden von Faxen direkt vom Computer aus Senden von Faxen vom Computer aus (PC-Fax) (MF729Cx / MF728Cdw / MF628Cw) Senden
0W5F-029 Konfigurieren der Anfangseinstellungen für Faxfunktionen Führen Sie zur Konfiguration der Faxeinstellungen die unten beschriebenen Schritte 1 bis 4 aus. Ermitteln Sie zunächst den für Ihre Zwecke geeigneten Empfangsmodus, und konfigurieren Sie dann die Einstellungen nach den Bildschirmanweisungen. Wenn Sie nähere Informationen zu einem Schritt wünschen, klicken Sie auf den Link, um den entsprechenden Abschnitt aufzurufen.
0W5F-02A Ermitteln des geeigneten Faxempfangsmodus Ermitteln Sie vor der Konfiguration der Faxeinstellungen den für Ihre Zwecke geeigneten Empfangsmodus. Zweck Empfangsmodus Nur Faxen/Telefon wird nie benutzt Verwenden Sie diese Einstellung, wenn Sie mit dem Gerät ausschließlich Faxe empfangen und das Telefon bzw. den optionalen Hörer gar nicht verwenden.
0W5F-02C Speichern der Faxnummer und des Gerätenamens Speichern Sie die Faxnummer und den Gerätenamen Ihres Geräts. Diese Informationen werden oben auf jeder vom Gerät gesendeten Seite gedruckt. 1 Drücken Sie 2 Tippen Sie auf 3 Tippen Sie auf . 4 Tippen Sie auf . 5 Geben Sie mit den Zahlentasten die Faxnummer ein ( 6 Tippen Sie auf . , und tippen Sie auf . . Eingeben von Text ), und tippen Sie auf .
7 Geben Sie den Gerätenamen, wie beispielsweise den Anwender- oder Firmennamen, ein ( und tippen Sie auf . Geben Sie bis zu 24 alphanumerische Zeichen ein. Durch Tippen auf schalten Sie zwischen den Eingabemodi um.
0W5F-02E Auswählen des Empfangsmodus Ermitteln Sie vorab den für Ihre Zwecke geeigneten Empfangsmodus ( 1 Ermitteln des geeigneten Faxempfangsmodus). Tippen Sie auf . Der hier abgebildete Bildschirm wird angezeigt, nachdem der Gerätename gespeichert wurde ( und des Gerätenamens). 2 Speichern der Faxnummer Wählen Sie den für Ihre Zwecke geeigneten Empfangsmodus. Wählen Sie den Empfangsmodus durch Tippen auf oder aus.
LINKS Empfangen von Faxen (MF729Cx / MF728Cdw / MF628Cw) 㻝㻝㻣㻌㻛㻌㻣㻠㻠
0W5F-02F Anschließen an die Telefonleitung Schließen Sie das Gerät an die Telefonleitung an. 1 Tippen Sie auf . Einer der hier abgebildeten Bildschirme wird angezeigt, nachdem der Empfangsmodus eingestellt wurde ( Empfangsmodus). 2 Auswählen des Schließen Sie das Gerät an die Telefonleitung an. Hinweis zum Anschluss der Telefonleitung Dieses Produkt umfasst ein Telefonleitungskabel und einen Adapter zum Anschluss an die Telefonleitung.
Wenn Sie ein externes Telefon mit Faxfunktionen anschließen, konfigurieren Sie am Telefon den manuellen Faxempfang. 3 4 Tippen Sie auf , nachdem Sie das Gerät an die Telefonleitung angeschlossen haben. Tippen Sie auf . 5 Tippen Sie auf . 6 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Beim Neustart des Geräts wird der Telefonleitungstyp automatisch eingestellt.
0W5F-02H Senden von Faxen Sie müssen einige Schritte ausführen, bevor Sie Faxfunktionen nutzen können. für Faxfunktionen (MF729Cx / MF728Cdw / MF628Cw) 1 Legen Sie das Dokument oder die Dokumente ein. 2 Drücken Sie Konfigurieren der Anfangseinstellungen Einlegen von Dokumenten , und tippen Sie auf . Wenn der Anmeldebildschirm angezeigt wird, geben Sie mit den Zahlentasten den Benutzernamen und das Passwort ein. Wählen .
2 Wählen Sie einen zu löschenden Empfänger aus. 3 Tippen Sie auf . 4 Tippen Sie auf . Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 auf tippen, können Sie durch Tippen auf / zwischen den angegebenen . Empfängern umschalten.
3 Geben Sie die Landeskennzahl, die Ortsvorwahl und die Faxnummer ein. 4 Tippen Sie auf , um am Ende der Faxnummer erforderlichenfalls eine Pause einzufügen. Die hier eingefügte Wartezeit beträgt 10 Sekunden. Dieser Wert kann nicht geändert werden. 5 5 Tippen Sie auf . Legen Sie die gewünschten Scaneinstellungen fest. Tippen Sie auf das Element, das Sie festlegen wollen. 6 Drücken Sie Verschiedene Faxeinstellungen (Schwarzweiß), um das Senden zu starten. Das Scannen beginnt.
Wenn Sie Faxe immer mit denselben Einstellungen senden möchten: Ändern von Standardeinstellungen Wenn Sie eine bei Bedarf zu verwendende Kombination von Einstellungen speichern möchten: Speichern häufig verwendeter Faxeinstellungen Wenn bei nicht aufgelegtem Hörer ein Alarm zu hören sein soll: Alarm Hörer auflegen LINKS Abbrechen des Sendens von Faxen Senden und Empfangen von Faxen je nach Verwendungszweck (MF729Cx / MF728Cdw / MF628Cw) Überprüfen von Status und Log für gesendete und empfangene Dokumente
0W5F-02J Angeben von gespeicherten Empfängern Sie können Empfänger über die Zahlentasten angeben oder indem Sie sie aus dem Adressbuch oder aus den Nummern für die kodierte Wahl auswählen. Zur Verwendung des Adressbuchs oder der Nummern für die kodierte Wahl müssen Sie die Empfänger zuvor im Adressbuch speichern. Sie können auch zuvor verwendete Empfänger angeben. Wenn in Ihrem Büro ein LDAP-Server installiert ist, können Sie auch Empfänger auf dem Server angeben.
0W5F-02K Angeben aus dem Adressbuch (Fax) Im Adressbuch können Sie einen Empfänger aus der Liste der gespeicherten Empfänger auswählen oder unter den Empfängern, für die ein Name gespeichert ist, nach einem Namen suchen. Sie müssen Empfänger im Adressbuch speichern, bevor Sie diese Funktionen nutzen können. Adressbuch 1 Drücken Sie , und tippen Sie auf . Sie können auch auf 2 Speichern von Daten im Wählen Sie durch Tippen auf / tippen.
Wenn Sie mehrere Empfänger angeben möchten Wiederholen Sie die folgenden Schritte. Sie können bis zu 300 Empfänger angeben. Wählen Sie eine Registerkarte aus Wählen Sie einen Empfänger aus. Zur Angabe weiterer Empfänger über die Zahlentasten tippen Sie auf <Über numerische Tasten angeben>. So löschen Sie Empfänger Wenn Sie mehrere Empfänger angegeben haben, können Sie sie nötigenfalls auch wieder löschen.
0W5F-02L Direktauswahl von Empfängern durch Eingabe von Nummern für die kodierte Wahl (Fax) Dreistellige Nummern (Nummern für die kodierte Wahl) werden Adressen im Adressbuch zugeordnet. Sie können eine Adresse angeben, indem Sie einfach die zugehörige Nummer für die kodierte Wahl eingeben. Zur Verwendung der kodierten Wahl muss der Empfänger vorab im Adressbuch gespeichert werden. Empfängern im Adressbuch 1 Drücken Sie Speichern von , und tippen Sie auf .
2 Wählen Sie einen zu löschenden Empfänger aus. 3 Tippen Sie auf . Wenn Sie in Schritt 2 die Gruppenwahl angegeben haben, wird "XX Empfänger" angezeigt. Durch Tippen auf werden die in der Gruppe gespeicherten Empfänger angezeigt. 4 Tippen Sie auf . Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 auf tippen, können Sie durch Tippen auf / zwischen den angegebenen . Empfängern umschalten.
0W5F-02R Angeben von zuvor verwendeten Empfängern (Fax) Sie können einen Empfänger aus den drei zuletzt verwendeten Empfängern auswählen. Wenn Sie einen zuvor verwendeten Empfänger angeben, gelten dieselben Faxeinstellungen, wie die Dichte, die beim letzten Senden von Dokumenten an diesen Empfänger eingestellt waren. Wenn auf gesetzt ist, können Sie diese Funktion nicht verwenden.
2 Wählen Sie einen zu löschenden Empfänger aus. 3 Tippen Sie auf . Wenn Sie in Schritt 2 die Gruppenwahl angegeben haben, wird "XX Empfänger" angezeigt. Durch Tippen auf werden die in der Gruppe gespeicherten Empfänger angezeigt. 4 Tippen Sie auf . Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 auf tippen, können Sie durch Tippen auf / zwischen den angegebenen . Empfängern umschalten.
0W5F-02S Angeben von auf einem LDAP-Server gespeicherten Empfängern (Fax) Wenn im Büro ein LDAP-Server installiert ist, können Sie auf dem Server gespeicherte Empfänger verwenden. Greifen Sie dazu über das Gerät auf den LDAP-Server zu, und suchen Sie den Empfänger. Sie müssen vorab die Einstellungen für die Verbindung zu dem LDAP-Server vornehmen. 1 Drücken Sie Speichern von LDAP-Servern , und tippen Sie auf .
Durch Tippen auf schalten Sie zwischen den Eingabemodi um (außer beim Suchen nach Faxnummern). Wenn Sie mehrere Suchkriterien angeben wollen, wiederholen Sie Schritt 4 und 5. 6 Tippen Sie auf . 7 Wählen Sie die Suchmethode aus. Sucht die Empfänger, die allen in Schritt 4 und 5 angegebenen Suchkriterien entsprechen, und zeigt diese an.
2 Wählen Sie einen zu löschenden Empfänger aus. 3 Tippen Sie auf . 4 Tippen Sie auf . Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 auf tippen, können Sie durch Tippen auf / zwischen den angegebenen . Empfängern umschalten.
0W5F-02U Verschiedene Faxeinstellungen Es sind zahlreiche Einstellungen nach Ihren Wünschen verfügbar, zum Beispiel, wenn Sie die Dichte oder die Deutlichkeit eines Bildes anpassen möchten.
0W5F-02W Einstellen der Auflösung Sie können die für den jeweiligen Dokumententyp geeignete Auflösung wählen. Bei einer höheren Auflösung wird das Bild klarer, aber das Senden dauert länger. Wählen Sie die Auflösung <200 x 100 dpi (Normal)> Geeignet für reine Textdokumente. <200 x 200 dpi (Fein)> Geeignet für Dokumente mit fein gedrucktem Text. <200 x 200 dpi (Foto)> Geeignet für Dokumente mit Fotos.
0W5F-02X Justieren der Dichte Sie können die Dichte des Faxes justieren, wenn Text oder Bilder in einem Dokument zu hell oder zu dunkel sind. Justieren Sie die Dichte <-> Verringert die Dichte. <+> Erhöht die Dichte.
0W5F-02Y Justieren der Schärfe Sie können die Schärfe des Bildes vor dem Senden anpassen. Erhöhen Sie die Schärfe, um verschwommenen Text und Linien schärfer darzustellen, oder senken Sie die Schärfe, um die Darstellung von Zeitschriftenfotos zu verbessern. Justieren Sie die Schärfe <-> Verringert die Schärfe und schwächt die Kontraste im Bild ab. Beispiel: Wenn Sie das Erscheinungsbild von Fotos aus Magazinen verbessern möchten <+> Erhöht die Bildschärfe.
0W5F-030 Scannen doppelseitiger Dokumente Das Gerät kann automatisch die Vorder- und Rückseite von Dokumenten in der Zufuhr scannen. Legen Sie die Dokumente in die Zufuhr ein. Wenn die Dokumente auf das Vorlagenglas gelegt werden oder wenn das manuelle Senden eingestellt ist, können nicht beide Seiten automatisch gescannt werden.
0W5F-031 Anpassen der Faxeinstellungen je nach Anforderungen Die Standardeinstellungen sind die Einstellungen, die immer dann angezeigt werden, wenn Sie das Gerät einschalten oder wenn Sie drücken. Wenn Sie Ihre häufig verwendeten Einstellungen als Standardeinstellungen registrieren, müssen Sie nicht jedes Mal die gleichen Einstellungen konfigurieren, wenn Sie ein Fax senden. Außerdem können Sie Kombinationen mehrerer Faxeinstellungen speichern und bei Bedarf verwenden.
0W5F-032 Ändern von Standardeinstellungen Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Senden von Faxen nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen.
0W5F-033 Speichern häufig verwendeter Faxeinstellungen Sie können bis zu 18 häufig verwendete Kombinationen der Faxeinstellungen speichern. Sie können gespeicherte Einstellungen bei Bedarf schnell anzeigen und müssen so nicht jedes Mal die betreffenden Einstellungen vornehmen, zum Beispiel wenn Sie "einen Scan eines zweiseitigen Originals erstellen, den Scan an 5 Empfänger senden und die Schärfe einstellen". Sie können Einstellungen auch als Schnellschaltflächen auf dem Bildschirm anzeigen.
6 Überprüfen Sie die Details der zu speichernden Einstellungen, und tippen Sie auf . Verschiedene Faxeinstellungen Zum Ändern des Wertes einer zu speichernden Einstellung tippen Sie auf die Einstellung. Wenn Sie den Speicherempfänger umbenennen wollen, tippen Sie auf . 7 Eingeben von Text Wählen Sie aus, ob die Einstellungen als Schnellschaltfläche gespeichert werden sollen. Wenn Sie auswählen, wird eine Meldung angezeigt.
Nach dem Abruf der Einstellungskombination können Sie die Faxeinstellungen auch nach Bedarf ändern.
0W5F-034 Abbrechen des Sendens von Faxen Wenn Sie das Senden eines Faxes sofort nach Drücken von (Schwarzweiß) abbrechen möchten, tippen Sie auf dem Display auf . Sie können das Senden von Faxen auch nach der Überprüfung des Faxstatus , oder drücken Sie auf dem Bedienfeld abbrechen.
Überprüfen von Status und Log für gesendete und empfangene Dokumente 㻝㻠㻡㻌㻛㻌㻣㻠㻠
0W5F-035 Empfangen von Faxen In diesem Abschnitt werden die Methoden zum Empfangen von Faxen und die Konfiguration des Geräts für den Empfang von Faxen beschrieben. Sie müssen einige Schritte für die Verwendung der Faxfunktionen ausführen, bevor Sie die Empfangseinstellungen festlegen. Konfigurieren der Anfangseinstellungen für Faxfunktionen (MF729Cx / MF728Cdw / MF628Cw) Das Gerät kann empfangene Faxdokumente auf Papier im A4- oder Letter-Format drucken.
empfangen werden. Wenn Sie den Hörer abnehmen und ein Faxerkennungston zu hören ist, handelt es sich um einen Faxanruf. Sie können das Fax empfangen, indem Sie über das Telefon einfach eine bestimmte ID-Nummer eingeben. Empfangen von Faxen über ein Telefon (Fernempfang) Konfiguration des Geräts für den Faxempfang 1 Drücken Sie , und tippen Sie auf . Wenn der Anmeldebildschirm angezeigt wird, geben Sie mit den Zahlentasten den Benutzernamen und das Passwort ein. Wählen .
Wenn Sie empfangene Dokumente auf beiden Seiten des Papiers ausdrucken möchten: Doppelseitig drucken Wenn Sie Informationen wie Empfangsdatum und -uhrzeit unten auf die empfangenen Dokumente drucken möchten: Fußzeile bei Empfang Wenn Sie bei niedrigem Tonerstand das Drucken fortsetzen möchten: Weiterdrucken, wenn Tonermenge niedrig ist Empfangen von Faxen über ein Telefon (Fernempfang) Wenn beim Abheben ein Faxsignal zu hören ist, brauchen Sie den Faxempfang nicht am Gerät einzuschalten.
0W5F-036 Senden und Empfangen von Faxen je nach Verwendungszweck Zusätzlich zu den grundlegenden Sende- und Empfangsmethoden steht eine Vielzahl weiterer Möglichkeiten zur Verfügung, die Sie je nach Verwendungszweck nutzen können.
0W5F-037 Senden von Faxen nach einem Sprachanruf (manuelles Senden) Sie können nach einem Sprachanruf manuell Faxe senden. Wenn Sie einen Faxerkennungston hören, versucht (Schwarzweiß), um die Faxe zu senden. der Empfänger, den Faxempfang zu starten. Drücken Sie Sie müssen vorab ein Telefon oder den optionalen Hörer an das Gerät anschließen. 1 Legen Sie das Dokument oder die Dokumente ein.
0W5F-038 Senden von Faxen an mehrere Empfänger gleichzeitig (Rundsendung) Sie können Faxe an bis zu 310 Empfänger gleichzeitig senden. Wählen Sie mit den Zahlentasten * oder über das Adressbuch mehrere Empfänger aus. Wenn im Büro ein LDAP-Server * installiert ist. * Die maximale Anzahl der Ziele, die Sie festlegen können, wenn Sie einen LDAP-Server oder die Zahlentasten verwenden, ist jeweils 10.
6 Drücken Sie (Schwarzweiß), um das Senden zu starten.
0W5F-039 Faxempfang im Speicher (Speicherempfang) Sie können Faxe beim Empfang im Speicher speichern und sie dann später drucken. Mit dieser Funktion können Sie vermeiden, dass unbefugte Personen vertrauliche Dokumente versehentlich einsehen. Speichern von Dokumenten im Speicher Drucken von gespeicherten Dokumenten Überprüfen/Löschen von gespeicherten Dokumenten Die gespeicherten Dokumente können auch an einen Empfänger weitergeleitet werden.
Überprüfen/Löschen von gespeicherten Dokumenten Sie können detaillierte Informationen über die gespeicherten Dokumente anzeigen, einschließlich der Faxnummern der Absender und der Anzahl der empfangenen Seiten, und nicht benötigte Dokumente dann löschen. 1 2 Drücken Sie . Tippen Sie auf . 3 Tippen Sie auf . 4 Wählen Sie das zu überprüfende Dokument aus.
LINKS Empfangen von Faxen (MF729Cx / MF728Cdw / MF628Cw) Überprüfen von Status und Log für gesendete und empfangene Dokumente 㻝㻡㻡㻌㻛㻌㻣㻠㻠
0W5F-03A Weiterleiten von empfangenen Faxen Sie können empfangene Dokumente an andere Empfänger weiterleiten. Sie können ein Dokument aus den gespeicherten Dokumenten auswählen und nur dieses weiterleiten oder das Gerät so einstellen, dass alle empfangenen Dokumente an die angegebenen Empfänger weitergeleitet werden. Als Empfänger für die Weiterleitung können Sie Faxnummern ebenso wie E-Mail-Adressen, I-Fax, gemeinsame Ordner auf Computern und FTP-Server angeben.
0W5F-03C Auswählen eines weiterzuleitenden Dokuments Das Gerät leitet das Dokument weiter, das Sie aus allen gespeicherten Dokumenten auswählen. Wenn Sie diese Funktion nutzen Faxempfang im Speicher (Speicherempfang) möchten, aktivieren Sie zunächst den Speicherempfang. Solange Sie den Speicherempfang nicht deaktivieren, werden die gespeicherten Dokumente nach der Weiterleitung nicht gelöscht. Sie können dieselben Dokumente also mehrmals weiterleiten. 1 2 Drücken Sie . Tippen Sie auf .
0W5F-03E Automatisches Weiterleiten aller empfangenen Dokumente Das Gerät kann alle empfangenen Dokumente an die angegebenen Empfänger weiterleiten. So können Sie jederzeit überall Faxe erhalten, auch wenn Sie nicht im Büro sind.
Speichern von Dokumenten, die nicht weitergeleitet werden konnten Drucken/Neusenden/Löschen von gespeicherten Dokumenten 1 2 3 Drücken Sie . Tippen Sie auf . Wählen Sie das zu überprüfende Dokument aus. So drucken Sie das geprüfte Dokument 1 Tippen Sie auf . 2 Tippen Sie auf . 3 Tippen Sie auf .
So senden Sie das geprüfte Dokument neu 1 Tippen Sie auf . 2 Tippen Sie auf . 3 Wählen Sie den Empfänger für die Weiterleitung aus dem Adressbuch aus. Anweisungen zum Verwenden des Adressbuchs finden Sie in Angeben aus dem Adressbuch (Fax). So löschen Sie das geprüfte Dokument 1 Tippen Sie auf . 2 Tippen Sie auf .
0W5F-03F Archivieren von gesendeten Faxen Neben der beim Senden des Faxes angegebenen Adresse können Sie gefaxte Dokumente zur Archivierung auch an eine voreingestellte Speicheradresse senden. Dies ist hilfreich, wenn Sie ein Log über gesendete Dokumente behalten wollen. Sie können als Speicheradresse eine Faxnummer, eine E-Mail-Adresse, einen gemeinsamen Ordner auf dem Computer, einen FTP-Server oder ein I-Fax angeben. Nur Empfänger im Adressbuch können als Speicheradresse angegeben werden.
0W5F-03H Empfangen von Faxinformationsdiensten Über Faxinformationsdienste stellen Unternehmen und Organisationen eine Vielzahl von hilfreichen Informationen zu Arbeit und Freizeit zur Verfügung. In diesem Abschnitt wird das übliche Verfahren zum Empfangen solcher Dienste beschrieben. Je nach Dienst kann sich das Vorgehen von dem hier beschriebenen unterscheiden. Führen Sie die für den jeweiligen Dienst nötigen Schritte aus. 1 Drücken Sie , und tippen Sie auf .
6 Tippen Sie auf . Wenn Sie den Hörer abgenommen haben, legen Sie auf.
0W5F-03J Überprüfen von Status und Log für gesendete und empfangene Dokumente Die Statusinformationen und Kommunikationslogs für gesendete und empfangene Fax- und I-Faxdokumente können getrennt angezeigt werden. Sie können detaillierte Informationen zu den Dokumenten anzeigen, einschließlich der Empfänger und der Anzahl der Seiten, und nicht benötigte Dokumente löschen. Wenn auf gesetzt ist, können Sie die Kommunikationslogs nicht anzeigen.
2 Wählen Sie das Dokument aus, dessen Log Sie überprüfen möchten. / Zeigt eine Liste der Dokumente an, die gesendet und empfangen wurden. wird angezeigt, wenn ein Dokument erfolgreich gesendet oder empfangen wurde, wird angezeigt, wenn ein Dokument aufgrund eines Abbruchs oder Fehlers nicht gesendet oder empfangen wurde. Zeigt detaillierte Informationen zum in der Liste ausgewählten Dokument an.
0W5F-03K Senden von Faxen vom Computer aus (PC-Fax) Sie können in einer Computeranwendung erstellte Faxdokumente direkt vom Computer aus senden. So brauchen Sie Dokumente für das Faxen nicht mehr auszudrucken und können Papier sparen.
0W5F-03L Senden von PC-Faxen Wenn im Gerät auf gesetzt ist, können Sie keine Faxe vom Computer aus senden. Unterbinden von PC-Faxen (MF729Cx / MF728Cdw / MF628Cw) Sie müssen im verwendeten Faxtreiber die Verwaltung per Abteilungs-IDs aktivieren, wenn die Verwaltung per Abteilungs-IDs am Gerät aktiviert ist. Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Faxtreiberbildschirm auf [Hilfe].
1 Klicken Sie auf die Registerkarte [Ziel auswählen]. 2 Klicken Sie auf [Ziel hinzufügen]. 3 Stellen Sie den Kommunikationsmodus oder die Faxnummer (oder URI) ein. 4 Wiederholen Sie Schritt 2 und 3, um Empfänger gleichzeitig hinzuzufügen. Wenn Sie eine Nummer zum Wählen einer Amtsleitung festlegen müssen, wählen Sie [Detaillierte Einstellungen] [Amtsholung zu G3/IP-Faxnummer hinzufügen] aus, und geben Sie die Nummer in [Amtsholung] ein.
4 5 Klicken Sie auf [Senden], um das Dokument zu senden.
0W5F-03R Hinzufügen von Deckblättern zu PC-Faxen Sie können zu dem Dokument, das Sie senden, ein Deckblatt hinzufügen. Wählen Sie eins der drei im Faxtreiber vordefinierten Deckblätter, oder erstellen Sie eigene Deckblätter. Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Faxtreiberbildschirm auf [Hilfe]. 1 Öffnen Sie in einer Anwendung ein Dokument, und rufen Sie das Druckdialogfeld auf. Wie Sie das Druckdialogfeld aufrufen, hängt von der jeweiligen Anwendung ab.
Registerkarte [Absender] Wählen Sie aus, welche Informationen zum Absender eingefügt werden sollen, und geben Sie die Informationen ein. Registerkarte [Ziel] Wählen Sie die Empfänger aus, die Sie aufnehmen möchten, und geben Sie die Informationen ein. Empfängernamen, Firmennamen, Abteilungsnamen und Faxnummern, die Sie auf der Registerkarte [Ziel auswählen]/[Ziel eingeben] angegeben haben ( Senden von PC-Faxen), werden in das Deckblatt eingefügt.
der linken Seite angezeigte Bild. Registerkarte [Details] [Anzahl der zu sendenden Blätter einfügen] Aktivieren Sie dieses Kontrollkästchen, wenn die Anzahl der zu sendenden Blätter auf dem Deckblatt enthalten sein soll, und geben Sie die Anzahl der Blätter in [Anzahl der zu sendenden Blätter] an. Die Anzahl der zu sendenden Blätter wird nicht automatisch ermittelt. In das Deckblatt wird der Wert, den Sie hier eingeben, eingefügt.
0W5F-03S Verwenden des Adressbuchs für PC-Faxe Nachdem Sie häufig verwendete Empfänger für PC-Faxe im Adressbuch gespeichert haben, können Sie sie beim Senden von PC-Faxen mühelos auswählen. Außerdem können Sie mit Anwendungen wie Microsoft Excel erstellte Adressbuchdaten im CSV-Format in das Gerät importieren oder die Adressbuchdaten in eine Datei exportieren und dann für ein anderes Faxgerät oder in anderen Anwendungen verwenden.
0W5F-03U Speichern von Empfängern In diesem Abschnitt wird beschrieben, wie Sie Empfänger im Adressbuch für PC-Faxe speichern. Sie können einzelne Empfänger aus den im Adressbuch gespeicherten Empfängern auswählen und zu einer Empfängergruppe zusammenfassen (Gruppenwahl) und dann ganz komfortabel Faxe an mehrere Empfänger auf einmal senden. Speichern von Empfängern Speichern mehrerer Empfänger als Empfängergruppe (Gruppenwahl) Insgesamt können 6.000 Empfänger gespeichert werden: 3.
Wenn Sie gespeicherte Empfänger bearbeiten oder löschen wollen, wählen Sie den Empfänger aus dem [Adressbuch] aus, und klicken Sie auf [Bearbeiten] oder [Löschen]. 5 Stellen Sie die einzelnen Einstellungen ein, und klicken Sie auf [OK]. Adresse Geben Sie den Empfängernamen, den Firmennamen und den Abteilungsnamen ein. [Hinweise] Geben Sie bei Bedarf Kommentare ein. Faxnummer Geben Sie eine Faxnummer oder mehrere Faxnummern ein. Falls erforderlich, können Sie zwischen die Ziffern Bindestriche einfügen.
3 Klicken Sie auf die Registerkarte [Ziel auswählen] 4 Klicken Sie auf [Gruppe hinzufügen]. [Adressbuch bearbeiten]. Wenn Sie gespeicherte Empfänger bearbeiten oder löschen wollen, wählen Sie den Empfänger aus dem [Adressbuch] aus, und klicken Sie auf [Bearbeiten] oder [Löschen]. 5 Stellen Sie die einzelnen Einstellungen ein, und klicken Sie auf [OK]. [Gruppenname] Geben Sie einen Gruppennamen wie "Vertriebsabteilung 1" ein.
[Anzeigen] Wählen Sie aus, welcher Typ von Empfängern in der Liste [Verfügbare Ziele] angezeigt werden soll, aus der Sie die für die Gruppenwahl zu speichernden Empfänger auswählen können. [Person] Zeigt einzelne Empfänger an. [Gruppe] Zeigt Empfängergruppen an. [Alle] Zeigt alle im Adressbuch gespeicherten Empfänger an. [Verfügbare Ziele] Wählen Sie die Empfänger aus, die für die Gruppenwahl gespeichert werden sollen, und klicken Sie auf [Hinzufügen].
0W5F-03W Verwenden von gespeicherten Empfängern In diesem Abschnitt wird beschrieben, wie Sie im Adressbuch gespeicherte Empfänger angeben. Speichern von Empfängern Sie können das Adressbuch nicht verwenden, wenn Sie keine Berechtigung für den Zugriff auf den Ordner haben, in dem das Adressbuch gespeichert ist.
Sie können unter [Adressliste] nach Empfängern suchen. Durch Klicken auf [Adressbuch bearbeiten] können Sie das Adressbuch bearbeiten.
0W5F-03X Importieren/Exportieren von Adressbuchdaten über den Faxtreiber Sie können mit Anwendungen wie Microsoft Excel erstellte Adressbuchdaten im CSV-Format in das Gerät importieren oder die Adressbuchdaten in eine Datei exportieren und dann für ein anderes Faxgerät oder in anderen Anwendungen verwenden. Das Gerät unterstützt zwei Dateiformate: CSV-Dateien (*.csv) und Canon Adressbuchdateien (*.abk).
5 Wählen Sie die zu importierende Datei, und klicken Sie auf [Öffnen]. Geben Sie bei einer CSV-Datei die in der Datei verwendeten Trennzeichen an. Die aus der Datei importierten Empfänger werden im [Adressbuch] angezeigt. Exportieren von Adressbuchdaten 1 2 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners Klicken Sie mit der rechten Maustaste auf das Faxtreibersymbol für Ihr Gerät, und klicken Sie dann auf [Druckeinstellungen].
3 Klicken Sie auf die Registerkarte [Ziel auswählen] 4 Klicken Sie auf [Exportieren]. [Adressbuch bearbeiten]. Wenn Sie in dem Dialogfeld, das angezeigt wird, wenn Sie auf der Registerkarte [Spezial] auf [Sicherheitseinstellungen] klicken, die Option [Beim Exportieren von Adressliste durch Passwort schützen] gewählt haben, wird ein Dialogfeld für die Eingabe eines Passworts angezeigt, sobald Sie auf [Exportieren] klicken.
Geben Sie bei einer CSV-Datei die in der Datei verwendeten Trennzeichen an. Die Adressbuchdaten werden an den angegebenen Speicherort exportiert. Ändern des Speicherorts für Adressbuchdaten 1 2 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners Klicken Sie mit der rechten Maustaste auf das Faxtreibersymbol für Ihr Gerät, und klicken Sie dann auf [Druckeinstellungen]. 3 Klicken Sie auf die Registerkarte [Ziel auswählen] 4 Klicken Sie auf [Einen Ordner definieren]. [Adressbuch bearbeiten].
5 Geben Sie den Speicherort für die Adressbuchdaten an, und klicken Sie auf [OK]. Speichern Sie die Adressbuchdaten in einem Ordner wie [Eigene Dokumente], für den Sie über Schreibberechtigung verfügen. 6 Klicken Sie auf [Neu], wenn Sie ein neues Adressbuch erstellen möchten, oder auf [Kopieren], um ein vorhandenes Adressbuch in den angegebenen Ordner zu kopieren. Das Adressbuch wird erstellt oder kopiert.
0W5F-03Y Verwenden von Internet-Fax (I-Fax) Mit der Funktion Internet-Fax (I-Fax) können Sie Faxe über das Internet senden und empfangen. Originale werden als TIFF-Bilddateien an E-Mails angehängt und gesendet. Da keine Telefonverbindung verwendet wird, können Sie Faxe über größere Entfernungen senden und Dokumente mit vielen Seiten senden, ohne sich über die Übertragungskosten Gedanken machen zu müssen.
0W5F-040 Senden von I-Faxen Wenn Sie ein Fax an einen Computer oder ein anderes I-Fax-kompatibles Gerät senden wollen, geben Sie anstelle einer Faxnummer eine E-Mail-Adresse als Empfänger an. Wenn Sie ein I-Fax an einen Computer senden, wird es als E-Mail-Anhang im TIFF-Format gesendet. Und so wie beim Senden von E-Mails an einen Computer können Sie mehrere Empfänger sowie CC- und BCC-Empfänger angeben. 1 Legen Sie das Dokument oder die Dokumente ein.
6 Legen Sie die gewünschten Scaneinstellungen fest. Tippen Sie auf das Element, das Sie festlegen wollen.
3 Geben Sie mit den Zahlentasten den Betreff ein, und tippen Sie auf . Durch Tippen auf schalten Sie zwischen den Eingabemodi um. 4 Tippen Sie auf . 5 Geben Sie mit den Zahlentasten den Nachrichtentext ein, und tippen Sie auf . Durch Tippen auf schalten Sie zwischen den Eingabemodi um. 6 Tippen Sie auf . So geben Sie eine Antwortadresse an 1 Tippen Sie auf . 2 Tippen Sie auf .
8 Drücken Sie (Schwarzweiß), um das Senden zu starten. Das Scannen beginnt. Wenn der SMTP-Authentisierungsbildschirm angezeigt wird, geben Sie mit den Zahlentasten den Benutzernamen und das Passwort ein, und tippen Sie dann auf . Wenn Sie das Senden abbrechen wollen, tippen Sie auf . Wenn Sie in Schritt 1 Dokumente in die Zufuhr einlegen Das I-Fax wird gesendet, wenn das Scannen abgeschlossen ist.
4 Klicken Sie in [Mailbox löschen] auf [Löschen]. 5 Lesen Sie die angezeigte Meldung, und klicken Sie auf [OK]. Die E-Mail wird aus der Mailbox gelöscht. Wenn der Inhalt der Mailbox gelöscht wird Sobald im Meldungsfenster auf [OK] geklickt wird, werden alle E-Mails in der Servermailbox gelöscht. Wenn das Gerät über kein spezielles E-Mail-Konto verfügt, sollten Sie zunächst überprüfen, ob E-Mails in der Mailbox behalten werden müssen.
LINKS Abbrechen des Sendevorgangs von Dokumenten (E-Mail/I-Fax/Gemeinsamer Ordner/FTP-Server) Überprüfen des Logs auf gesendete Dokumente (E-Mail/I-Fax/Gemeinsamer Ordner/FTP-Server) 㻝㻥㻝㻌㻛㻌㻣㻠㻠
0W5F-041 Empfangen von I-Faxen Wenn ein I-Fax ankommt Wenn ein I-Fax ankommt, blinkt auf dem Bedienfeld die Anzeige [Processing/Data]. Nachdem das I-Fax vollständig empfangen wurde, wird das Dokument automatisch gedruckt, und die Anzeige erlischt.
0W5F-042 Verwenden des Geräts als Drucker Sie haben verschiedene Möglichkeiten, das Gerät als Drucker zu verwenden. Sie können mithilfe des Druckertreibers Dokumente auf dem Computer oder Bilddateien von einem USB-Speichergerät drucken. Nutzen Sie die vielen Druckfunktionen ganz nach Bedarf. Drucken von einem Computer Sie können mithilfe des Druckertreibers ein auf dem Computer erstelltes Dokument ausdrucken.
0W5F-043 Drucken von einem Computer Sie können mit einer Anwendung auf dem Computer erstellte Dokumente mithilfe des Druckertreibers drucken. Der Druckertreiber verfügt über nützliche Einstellungen wie Vergrößern/Verkleinern und doppelseitigen Druck, sodass Sie Ihre Dokumente auf unterschiedlichste Art ausdrucken können. Bevor Sie diese Funktion nutzen können, müssen Sie jedoch einige Schritte ausführen, beispielsweise den Druckertreiber auf dem Computer installieren.
㻝㻥㻡㻌㻛㻌㻣㻠㻠
0W5F-044 Drucken von Dokumenten In diesem Abschnitt wird beschrieben, wie Sie mithilfe des Druckertreibers Dokumente auf dem Computer ausdrucken. Geben Sie vor dem Drucken Format und Typ des in die Papierquelle eingelegten Papiers an. Einlegen von Papier Angeben von Papierformat und -typ Vergewissern Sie sich, dass die im Druckertreiber ausgewählten Einstellungen für Papierformat und Papiertyp dem Format und Typ des tatsächlich eingelegten Papiers entspricht.
[Ausgabeformat] Wählen Sie das Format des Papiers aus, auf dem das Dokument tatsächlich gedruckt wird. Wenn sich das ausgewählte Format von dem in [Seitenformat] ausgewählten Format unterscheidet, wird das Dokument automatisch entsprechend dem Vergrößern oder Verkleinern ausgewählten Format vergrößert/verkleinert gedruckt. Per Mausklick steuerbare Benutzerschnittstellenelemente Sie können das Seitenlayout, die Bindungsposition usw. intuitiv auf dem Vorschaubild angeben.
7 Klicken Sie auf [Drucken] oder [OK]. Der Druckvorgang startet. Bei einigen Anwendungen wird ein Bildschirm wie der unten dargestellte angezeigt. Um den Druckvorgang abzubrechen, klicken Sie auf [Abbrechen], wenn der oben dargestellte Bildschirm angezeigt wird. Nachdem der Bildschirm ausgeblendet wurde oder wenn der Bildschirm nicht angezeigt wird, können Sie den Druckvorgang auf Abbrechen des Druckens andere Arten abbrechen.
0W5F-045 Abbrechen des Druckens Sie können das Drucken vom Computer aus oder auf dem Bedienfeld des Geräts abbrechen. Am Computer Auf dem Bedienfeld Am Computer Sie können den Druckvorgang über das Druckersymbol abbrechen, das in der Taskleiste auf dem Desktop angezeigt wird. 1 Doppelklicken Sie auf das Druckersymbol.
Auf dem Bedienfeld Brechen Sie den Druckvorgang mit oder ab. Abbrechen mit Wenn nach dem Drücken von auf dem Bildschirm eine Liste von Dokumenten angezeigt wird Tippen Sie auf das Dokument, dessen Druckvorgang abgebrochen werden soll. Überprüfen Sie vor dem Abbrechen den Status des Druckauftrags /Druckauftrag> Wählen Sie das Dokument auf dem Bildschirm
0W5F-046 Anzeigen des Druckstatus und des Logs Sie können den aktuellen Druckstatus und die Logs für gedruckte Dokumente anzeigen. Nützlich in folgenden Situationen Wenn Ihre Dokumente lange nicht gedruckt werden, können Sie die Warteschlange der zu druckenden Dokumente anzeigen. Wenn Sie vermeintlich gedruckte Ausdrucke nicht finden können, sehen Sie nach, ob ein Fehler aufgetreten ist. 1 2 3 Drücken Sie . Tippen Sie auf . Zeigen Sie den Druckstatus oder die Logs an.
Zeigt eine Liste der Dokumente an, die gedruckt wurden. wird angezeigt, wenn ein Dokument erfolgreich gedruckt wurde, wird angezeigt, wenn ein Dokument aufgrund eines Abbruchs oder Fehlers nicht gedruckt wurde. Zeigt detaillierte Informationen zum in der Liste ausgewählten Dokument an. Der angezeigte Dokumenten- oder Benutzername entspricht möglicherweise nicht dem tatsächlichen Dokumenten- oder Anwendername.
0W5F-047 Verschiedene Druckeinstellungen Es gibt eine Vielzahl von Einstellungen für Ihre Anforderungen, beispielsweise Vergrößern/Verkleinern und doppelseitigen Druck.
0W5F-048 Vergrößern oder Verkleinern Sie können zum Erstellen vergrößerter oder verkleinerter Ausdrucke einen voreingestellten Druckfaktor wie A5 bis A4 auswählen oder in Schritten von 1 % einen anwenderdefinierten Druckfaktor einstellen. Einstellen des Druckfaktors durch Angabe von Originaldokumenten- und Papierformat (voreingestellter Faktor) Der Druckfaktor wird auf der Grundlage des Dokumenten- und des Papierformats, die Sie eingestellt haben, automatisch eingestellt.
LINKS Drucken von Dokumenten 㻞㻜㻡㻌㻛㻌㻣㻠㻠
0W5F-049 Wechseln zwischen einseitigem und doppelseitigem Druck Beim MF729Cx / MF728Cdw / MF724Cdw können Sie ein- und doppelseitige Ausdrucke erstellen. Die Standardeinstellung ist [Doppelseitiger Druck]. Ändern Sie die Einstellung nach Bedarf. Das doppelseitige Drucken steht bei manchen Papierformaten und -typen möglicherweise nicht zur Verfügung.
LINKS Drucken von Dokumenten Drucken mehrerer Seiten auf ein Blatt Drucken einer Broschüre (MF729Cx / MF728Cdw / MF724Cdw) 㻞㻜㻣㻌㻛㻌㻣㻠㻠
0W5F-04A Sortieren von Ausdrucken nach Seitenreihenfolge Wählen Sie [Sortieren], um beim Drucken mehrerer Kopien mehrseitiger Dokumente ganze Sätze in Seitenreihenfolge zu sortieren. Diese Funktion ist nützlich, wenn Sie Handzettel für Besprechungen oder Präsentationen vorbereiten.
0W5F-04C Drucken mehrerer Seiten auf ein Blatt Sie können mehrere Seiten auf ein Blatt drucken. Beispielsweise können Sie mit [4 auf 1] oder [9 auf 1] vier bzw. neun Seiten auf ein Blatt drucken. Diese Funktion ist nützlich, wenn Sie Papier sparen oder die Dokumente als Miniaturbilder drucken wollen. Sie können noch mehr Papier sparen, wenn Sie diese Einstellung mit dem doppelseitigen Druck kombinieren.
0W5F-04E Drucken von Postern Sie können eine Seite eines Dokuments auf mehreren Seiten verteilt ausdrucken. Wenn Sie beispielsweise ein aus einer Seite bestehendes Dokument im A4-Format um das Neunfache vergrößert drucken, erhalten Sie nach dem Drucken des Dokuments und Zusammenfügen der Ausdrucke ein Poster aus 3x3 Seiten im A4Format. Registerkarte [Grundeinstellungen] 2]]) [OK] Wählen Sie in [Seitenlayout] die gewünschte Größe des Posters (z. B.
0W5F-04F Drucken einer Broschüre Sie können zwei Seiten eines Dokuments auf jeder Seite des Papiers drucken und die gedruckte Seiten dann in der Mitte falten, um eine Broschüre zu erhalten. Der Druckertreiber steuert die Druckreihenfolge so, dass die Seitenzahlen richtig angeordnet sind. Der Broschürendruck ist bei einigen Papierformaten und -arten möglicherweise nicht verfügbar. Das Papier, das für den Papier. doppelseitigen Druck verfügbar ist, ist auch für den Broschürendruck verfügbar.
Randbreite fest.
0W5F-04H Drucken von Rahmen Sie können Rahmen wie unterbrochene Linien oder Doppellinien an den Rändern der Ausdrucke hinzufügen. Registerkarte [Seite einrichten] [OK] Klicken Sie auf [Seitenoptionen] [Rahmen] Wählen Sie den Rahmentyp. Vorschau Zeigt eine Vorschau mit dem ausgewählten Rahmen an.
0W5F-04J Drucken von Datumsangaben und Seitenzahlen Sie können die Informationen, wie Datumsangaben oder Seitenzahlen, drucken und festlegen, wo diese Informationen auf dem Dokument gedruckt werden sollen (oben links, unten rechts usw.). Registerkarte [Seite einrichten] Anwendername oder Seitenzahl Klicken Sie auf [Seitenoptionen] [OK] [OK] Wählen Sie die Druckposition von Druckdatum, [Datum drucken] Legen Sie die Position fest, an der das Druckdatum gedruckt werden soll.
0W5F-04K Drucken von Wasserzeichen Sie können Wasserzeichen wie "KOPIE" und "VERTRAULICH" über das Dokument hinweg drucken. Dazu können Sie neue Wasserzeichen erstellen oder voreingestellte Wasserzeichen verwenden.
LINKS Drucken von Dokumenten Drucken von Rahmen Drucken von Datumsangaben und Seitenzahlen 㻞㻝㻢㻌㻛㻌㻣㻠㻠
0W5F-04L Einstellen des Farbmodus Sie können einen Farbmodus wählen (Farbe oder Schwarzweiß). Wenn ein Dokument Seiten in Farbe und in Schwarzweiß enthält und Sie die Automatik einstellen, werden Farbseiten farbig und Schwarzweißseiten automatisch schwarzweiß gedruckt. Registerkarte [Grundeinstellungen] Wählen Sie in [Farbmodus] den Farbmodus [OK] [Farbmodus] Wählen Sie [Schwarzweiß] oder [Farbe]. Wenn Sie [Auto [Farbe/S&W]] wählen, wird der Farbmodus Seite für Seite automatisch festgelegt.
Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Druckertreiberbildschirm auf [Hilfe].
0W5F-04R Drucken bestimmter Seiten auf anderem Papier Sie können bestimmte Seiten eines Dokuments drucken, wenn Sie zum Beispiel das Deckblatt einer Broschüre auf farbiges Papier drucken möchten. Legen Sie in diesem Fall farbiges Papier für das Deckblatt in die manuelle Zufuhr ein, legen Sie Normalpapier für die verbleibenden Seiten in die Papierkassette ein, und legen Sie dann die Papiereinstellungen im Druckertreiber fest.
0W5F-04S Auswählen von Dokumententypen Sie können den Dokumententyp festlegen und so für eine optimale Druckqualität sorgen. Es gibt verschiedene Einstellungen für Fotodokumente, Dokumente mit Diagrammen oder Grafiken und Dokumente mit EntwurfZeichnungen mit feinen Linien. Registerkarte [Qualität] Wählen Sie in [Dokument] den Dokumententyp aus [OK] [Dokument] Wählen Sie eine Option, die für den Dokumententyp oder den Druckzweck geeignet ist.
0W5F-04U Sparen von Toner Sie können den Druckertreiber so einstellen, dass die Dokumente mit weniger Toner ausgedruckt werden. Wenn die Einstellung für das Tonersparen aktiviert ist, sind feine Linien und Bereiche mit geringerer Druckdichte möglicherweise verschwommen.
0W5F-04W Zusammenfassen und Drucken mehrerer Dokumente Mit Canon PageComposer können Sie mehrere Dokumente zu einem Druckauftrag zusammenfassen und diesen mit bestimmten Druckeinstellungen drucken. Mit dieser Funktion können Sie beispielsweise Dokumente, die mit unterschiedlichen Anwendungen erstellt wurden, zusammenfassen und alle Seiten im selben Papierformat drucken. 1 Öffnen Sie in einer Anwendung ein Dokument, und rufen Sie das Druckdialogfeld auf.
5 Die Dokumente werden zu Canon PageComposer hinzugefügt. 6 Wählen Sie aus der Liste [Dokumentname] die zusammenzufassenden Dokumente aus, und klicken Sie auf . Zum Auswählen mehrerer Dokumente halten Sie Taste [UMSCHALT] oder die Taste [STRG] gedrückt, und klicken Sie auf die Dokumente. 7 Ändern Sie gegebenenfalls die Einstellungen, und klicken Sie auf [Kombinieren]. Die in Schritt 6 ausgewählten Dokumente werden zusammengefasst. [Druckvorschau] Zeigt eine Vorschau des zu druckenden Dokuments an.
Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Canon PageComposer-Bildschirm auf [Hilfe]. [Details] Ruft den Bildschirm mit den Druckeinstellungen des Druckertreibers auf. Es stehen weniger Einstellungen zur Verfügung als beim normalen Drucken. 8 Wählen Sie aus der Liste [Dokumentname] den Druckauftrag für das zu druckende zusammengefasste Dokument, und klicken Sie auf . Das Drucken beginnt.
0W5F-04X Konfigurieren von Druckereinstellungen am Gerät Beim Drucken eines Dokuments von einem Computer aus können Sie in der Anwendung, in der Sie das Dokument erstellt haben, oder im Druckertreiber viele Druckeinstellungen wie die Anzahl der Kopien oder den Farbmodus festlegen. Allerdings kann die unten beschriebene Einstellung nur am Gerät festgelegt werden.
0W5F-04Y Drucken eines mit einer PIN geschützten Dokuments (Geschützter Druck) Wenn Sie von einem Computer aus drucken und für ein Dokument eine PIN definieren, bleibt das Dokument im Gerät gespeichert und wird erst gedruckt, wenn die richtige PIN am Bedienfeld des Geräts eingegeben wird. Diese Funktion wird als "Geschützter Druck" bezeichnet, das mit einer PIN gesicherte Dokument als "geschütztes Dokument.
0W5F-050 Vorbereitungen für den geschützten Druck Stellen Sie sicher, dass der geschützte Druck beim Druckertreiber aktiviert ist. Melden Sie sich für die folgenden Schritte als Benutzer mit Administratorrechten am Computer an. 1 2 3 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners Klicken Sie mit der rechten Maustaste auf das Druckersymbol, und klicken Sie dann auf [Druckereigenschaften] oder [Eigenschaften].
0W5F-051 Drucken mit der Funktion für geschützten Druck In diesem Abschnitt wird beschrieben, wie Sie ein Dokument von einer Anwendung aus als geschütztes Dokument drucken. Im ersten Teil des Abschnitts wird dabei erläutert, wie Sie ein geschütztes Dokument an das Gerät senden, im zweiten Teil, wie Sie das geschützte Dokument am Gerät ausdrucken.
4 Legen Sie die Druckeinstellungen fest, und klicken Sie auf [OK]. Klicken Sie auf die Registerkarte [Grundeinstellungen], [Seite einrichten], [Endverarbeitung], [Papierzufuhr] oder [Qualität], um Verschiedene Druckeinstellungen gegebenenfalls die entsprechenden Druckeinstellungen vorzunehmen. 5 Klicken Sie auf [Drucken] oder [OK]. Wenn Sie das geschützte Dokument an das Gerät gesendet haben, bleibt es bis zum Drucken im Gerät gespeichert.
Ausdrucken geschützter Dokumente Wenn Sie das geschützte Dokument an das Gerät gesendet haben, drucken Sie es innerhalb von 30 Minuten. Danach wird das geschützte Dokument aus dem Speicher des Geräts gelöscht und kann nicht mehr gedruckt werden. Wenn geschützte Dokumente nicht gedruckt werden, belegen sie Speicher und verhindern möglicherweise, dass das Gerät normale (nicht geschützte) Dokumente druckt. Stellen Sie sicher, dass Sie die geschützten Dokumente so bald wie möglich drucken.
gedruckt wurden, Sie können diese Einstellung aber ändern. 1 2 Drücken Sie , und tippen Sie auf . Tippen Sie auf . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und PIN ein, und drücken Sie dann Anmelden am Gerät 3 4 Tippen Sie auf . Tippen Sie auf . Deaktivieren des geschützten Drucks Tippen Sie auf , und starten Sie das Gerät neu.
0W5F-052 Anpassen der Druckeinstellungen je nach Anforderungen Sie können Einstellungskombinationen als "Profile" registrieren, die Ihren verschiedenen Druckansprüchen entsprechen. Außerdem können Sie häufig verwendete Einstellungen als Standardeinstellung registrieren. Wenn die Standardeinstellung festgelegt wurde, werden die registrierten Einstellungen automatisch im Druckertreiberbildschirm angezeigt, und Sie können den Vorgang zur Festlegung der Druckeinstellungen überspringen und sofort drucken.
0W5F-053 Speichern von Kombinationen häufig benutzter Druckeinstellungen Das Konfigurieren von Einstellungskombinationen wie "Einseitiger Druck im Querformat auf Papier im A4-Format" kann sehr zeitaufwendig sein. Wenn Sie solche häufig verwendeten Kombinationen von Druckeinstellungen als "Profile" speichern, können Sie die Druckeinstellungen vornehmen, indem Sie einfach eins der Profile aus der Liste auswählen. In diesem Abschnitt wird beschrieben, wie Sie Profile speichern und mit ihnen drucken.
Ändern der Einstellungen des ausgewählten Profils Sie können die Einstellungen eines ausgewählten Profils ändern. Darüber hinaus können Sie die geänderten Einstellungen als weiteres Profil speichern.
0W5F-054 Ändern von Standardeinstellungen Die Standardeinstellungen sind die Einstellungen, die beim Öffnen des Druckeinstellbildschirms des Druckertreibers zuerst angezeigt werden, aber Sie können sie ändern. Wenn Sie beispielsweise alle Dokumente, einschließlich farbiger Dokumente, in Schwarzweiß drucken wollen, können Sie die Standardeinstellung für den Farbmodus in [Schwarzweiß] ändern.
0W5F-055 Drucken vom USB-Speicher (USB-Druck) Sie können Bilddateien ausdrucken, die auf einem USB-Speichergerät gespeichert sind, indem Sie es direkt an das Gerät anschließen. Mit dieser Funktion können Sie Ausdrucke ohne einen Computer vornehmen. Verfügbare Dateiformate Sie können die folgenden Typen von Bilddateien drucken. JPEG (DCF/Exif 2.
vor Stößen und Erschütterungen. Schalten Sie zudem dieses Gerät nicht AUS, solange die Verarbeitung läuft. 2 Drücken Sie 3 Tippen Sie auf . , und tippen Sie auf . Indexdruck Sie können Miniaturansichten der Bilddateien (nur JPEG) drucken, die auf einem USB-Speichergerät gespeichert sind. Um die Bilder als Miniaturansichten zu drucken, wählen Sie auf dem Bildschirm und fahren Sie mit dem nächsten Schritt fort.
Wenn Sie vor dem Tippen auf eine Datei ausgewählt haben, können Sie nur Dateien desselben Formats auswählen. So zeigen Sie eine Vorschau an Sie können von der Anzeigemethode (Dateinamen und Änderungsdaten) zu (Vorschau) wechseln. Wenn Sie eine Vorschau der Bilder anzeigen, können Sie den Dateiinhalt prüfen, bevor Sie eine Datei für das Drucken auswählen. Vorschaubilder werden für PDF-Dateien nicht angezeigt.
So ändern Sie die Sortierreihenfolge der Dateien Sie können die Sortierreihenfolge der Dateien auf einem USB-Speichergerät ändern. Sie können eine Sortiereinstellung wie oder als Standardeinstellung für die Standardeinstellungen Dateisortierung Sortierreihenfolge der Dateien angeben. 1 Tippen Sie auf . 2 Tippen Sie auf . 3 Tippen Sie auf die Kriterien für die Dateisortierung.
Tasten, um die gewünschte Menge einzugeben, und tippen Sie auf . Wählen Sie das Papier für den Druck aus. ist für den Druck von TIFF-Dateien nicht verfügbar. Sie können zwei oder vier Bilder auf ein einziges Blatt drucken. Wählen Sie <2 auf 1> oder <4 auf 1> aus. <2 auf 1> Druckt zwei Bilder auf ein einziges Blatt. <4 auf 1> Druckt vier Bilder auf ein einziges Blatt. <2-seitig> (MF729Cx / MF728Cdw / MF724Cdw) Sie können doppelseitige Ausdrucke erstellen.
<2-seitig> steht bei manchen Papierformaten oder -typen möglicherweise nicht zur Verfügung. Papier Geben Sie die Standardeinstellungen der USB-Druckfunktion für JPEG- und TIFF-Dateien an. Wenn Sie auf tippen, können Sie unter den einzelnen Bildern das Änderungsdatum der Datei drucken. Auch wenn beim Indexdruck nicht zur Verfügung steht, wird das Änderungsdatum der Datei automatisch unter den einzelnen Bildern gedruckt.
<-> Die Ausdrucke werden dunkler. <+> Die Ausdrucke werden heller. Sie können die Helligkeit von TIFF-Dateien nur justieren, wenn sie JPEG-komprimiert sind. Sie können das Druckverfahren auswählen, um Halbtöne (der Zwischenbereich zwischen den helleren und dunkleren Bereichen eines Bildes) für eine optimale Bildqualität zu reproduzieren. Tippen Sie auf oder .
Mit dieser Einstellung geben Sie an, ob der druckbare Bereich auf dem Papier vergrößert werden soll. Der Bereich 4 mm vom oberen, unteren, linken und rechten Rand des Papiers ist nicht bedruckbar. Der druckbare Bereich wird am oberen, unteren, linken und rechten Rand des Papiers vergrößert. Wenn Sie auswählen, werden Bilder am Rand des Papiers möglicherweise nicht korrekt gedruckt.
Mit dieser Einstellung können Sie definieren, wie geräteabhängige graue Daten verarbeitet werden. Die Beschreibung der Einstellung finden Sie unter Graustufenprofil verwenden. Mit dieser Einstellung können Sie das Profil definieren, das für die zu druckenden Daten geeignet ist. Es wird auf alle Daten im Druckauftrag angewendet. Achten Sie also darauf, dass das ausgewählte Profil für Ihren Auftrag das richtige ist.
2 Drücken Sie 3 Tippen Sie auf . 4 Tippen Sie auf . . Warten Sie, bis die Meldung angezeigt wird. 5 Trennen Sie das USB-Speichergerät vom Gerät.
0W5F-056 Ändern der Standardeinstellungen für den USB-Druck Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Drucken nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen.
0W5F-057 Verwenden des Geräts als Scanner Sie können Originaldokumente über das Bedienfeld des Geräts oder eine Anwendung auf dem Computer scannen. Egal welches Verfahren Sie wählen, die gescannten Dokumente werden in elektronische Dateiformate wie PDFs umgewandelt. Verwenden Sie die Scanfunktion, um Papierdokumente mit vielen Seiten in Dateien umzuwandeln, sodass Sie sie einfacher organisieren können.
0W5F-058 Vorbereitungen zur Verwendung des Geräts als Scanner Stellen Sie sicher, dass das Gerät und der Computer miteinander verbunden sind und die gesamte Software installiert ist. Um eine Verbindung über ein Wireless LAN oder verkabeltes LAN herzustellen, müssen Sie dieses Gerät in MF Network Scanner Selector registrieren. Führen Sie zur Registrierung die unten aufgeführten Schritte aus. Dieser Vorgang ist nicht erforderlich, wenn das Gerät und der Computer über USB verbunden sind.
0W5F-059 Scannen vom Gerät Die Abfolge "Scannen eines Dokuments und Speichern auf dem Computer" kann nur durchgeführt werden, wenn Sie über das Gerät scannen. Legen Sie beim Scanvorgang fest, auf welchem Computer die Dokumente gespeichert werden, ob die Dokumente in Farbe oder Schwarzweiß gespeichert werden sollen, ob die Dokumente als PDFs oder JPEGs gespeichert werden sollen sowie andere Einstellungen. 1 Legen Sie das Dokument oder die Dokumente ein.
Schwarzweiß*1 300 dpi Farbe 300 dpi JPEG/Exif Farbe 300 dpi JPEG/Exif Scan> Komprimierung *1 Dokumente werden nur in Schwarzweiß ohne graue Zwischenstufen gescannt. *2 Ein PDF-Format, bei dem Zeichen im Dokument als Textdaten gescannt werden und der Text mit dem Computer durchsucht werden kann. So ändern Sie die Einstellungen Sie können die Einstellungen mit MF Scan Utility ändern. Weitere Informationen finden Sie in MF Scan Utility unter [Anweisungen].
Einfacheres Scannen über das Gerät So scannen Sie immer mit denselben Einstellungen Ändern von Standardeinstellungen So speichern Sie Kombinationen von Scaneinstellungen und zeigen Sie bei Bedarf an Speichern häufig verwendeter Scaneinstellungen (E-Mail/I-Fax/Gemeinsamer Ordner/FTP-Server) Andere praktische Scanfunktionen Sie können gescannte Dokumente auf einem USB-Speichergerät speichern oder sie per E-Mail oder als I-Fax senden.
0W5F-05A Scannen von einem Computer Es gibt zwei Arten, um über einen Computer zu scannen: die Verwendung von MF Scan Utility und die Verwendung einer Anwendung, wie einer Bild- oder Textverarbeitungsanwendung. Wenn Sie das Gerät über eine USB-Verbindung verwenden, beenden Sie vor dem Scannen den Schlafmodus.
0W5F-05C Scannen mithilfe einer Anwendung Sie können Dokumente über Anwendungen wie Bildverarbeitungs- oder Textverarbeitungssoftware scannen. Das gescannte Bild wird direkt in die Anwendung geladen, sodass Sie es sofort bearbeiten oder verarbeiten können. Die folgenden Schritte variieren abhängig von der Anwendung. Die Anwendung muss mit TWAIN oder WIA * kompatibel sein. Weitere Informationen finden Sie in der Bedienungsanleitung für Ihre Anwendung.
0W5F-05E Konfigurieren von Scaneinstellungen in ScanGear MF ScanGear MF ist ein Scannertreiber im Lieferumfang des Geräts. Sie können ScanGear MF wie folgt nutzen. Starten über MF Scan Utility Wenn Sie über MF Scan Utility scannen, können Sie ScanGear MF aufrufen und erweiterte Scaneinstellungen konfigurieren. Klicken Sie in MF Scan Utility auf [ScanGear], um ScanGear MF zu starten. Weitere Informationen finden Sie in MF Scan Utility unter [Anweisungen].
0W5F-05F Konfigurieren von Scaneinstellungen im einfachen Modus Der einfache Modus ist eine Sammlung der grundlegenden Scaneinstellungen in ScanGear MF, der für eine einfache Bedienung konzipiert ist. Der einfache Modus ist, mit anderen Worten, eine Übersichtsversion von ScanGear MF. Konfigurieren Sie die Einstellungen in der bis auf dem Bildschirm angegeben ist, und klicken Sie auf [Scannen]. So können Sie die grundlegenden Reihenfolge, die von Einstellungen konfigurieren und dann scannen.
Wenn Sie das Dokument in die Zufuhr einlegen [Dokument (Farbe/Einzug)] Das Dokument wird als Farbbild gescannt. [Dokument (Graustufen/Einzug)] Das Dokument wird als Graustufenbild gescannt. [Zweck auswählen] Wählen Sie die Einstellung je nach dem beabsichtigten Verwendungszweck des gescannten Bilds. [Drucken (300 dpi)] Wählen Sie diese Option, wenn Sie das gescannte Bild drucken. [Bildanzeige (150 dpi)] Wählen Sie diese Einstellung, wenn Sie das gescannte Bild auf einem Computer anzeigen wollen.
0W5F-05H Konfigurieren von Scaneinstellungen im erweiterten Modus Wenn Sie auf die Registerkarte [Erweiterter Modus] des Bildschirms ScanGear MF klicken, können Sie umfangreichere Einstellungen der Bildqualität als im einfachen Modus vornehmen. Sie können auch erweiterte Einstellungen als "Bevorzugte Einstellungen" registrieren. neben dem Thema klicken.
(Bild verschieben) Mit dieser Option ziehen Sie das Bild, um den sichtbaren Teil des Bildes zu verschieben, wenn ein Vorschaubild vergrößert ist. (Zoom) Diese Option vergrößert das gesamte Vorschaubild. Klicken Sie mit der linken Maustaste auf das Bild, um es zu vergrößern. Klicken Sie mit der rechten Maustaste auf das vergrößerte Bild, um es zu verkleinern. Um einen Teil des Bildes zur Überprüfung der Details zu vergrößern, verwenden Sie [Zoom] ( ).
Wenn Dokumente in die Zufuhr eingelegt werden, legen Sie die Ausrichtung der Dokumente unter [Ausrichtung] fest. Sie können auch [Bindung] festlegen, wenn doppelseitige Dokumente in die Zufuhr eingelegt werden. [Farbmodus] Wählen Sie die Bildart, um Dokumente zu scannen. [Schwarzweiß] Das Dokument wird als Schwarzweißbild (nur schwarzweiß ohne graue Zwischenstufen) gescannt.
Wählen Sie [Flexibel], um das Ausgabeformat und das Verhältnis von Breite zu Höhe zu ändern. Ziehen Sie den zu scannenden Bereich im Vorschaubild oder geben Sie Werte für Breite und Höhe ein. Wenn Sie das Vergrößerungsverhältnis im Eingabefeld [%] auf der rechten Seite der Eingabefelder für Breite und Höhe eingeben, wird das Dokument für den Scanvorgang vergrößert oder verkleinert.
Konfigurieren Sie die Farbeinstellungen, wie Helligkeit, Kontrast und Farbton. Die angezeigten Optionen variieren abhängig von den für [Farbmodus] ausgewählten Einstellungen ( Festlegen der Einstellungen für Dokumente und den Farbmodus). Wenn [Textverbesserung] ausgewählt ist, können Sie diese Einstellungen nicht konfigurieren. (Helligkeit/Kontrast) Diese Option passt die Helligkeit und den Kontrast (den Unterschied zwischen den hellen und dunklen Teilen) des Bildes an.
(Graubalance-Pipette) Klicken Sie auf den Bereich des Vorschaubildes (oder des Schnittrahmens), den Sie als achromatische Farbe rendern möchten, also Schwarz, Grau oder Weiß ist, die jeweils keine Farbtiefe haben. Der Farbton des übrigen Bilds wird angepasst, wobei der angeklickte Bildbereich der Durchschnitt ist. Wenn zum Beispiel der Schnee in einem Foto bläulich ist, klicken Sie auf diesen Teil, da Sie diesen Teil im Endeffekt weiß darstellen möchten.
Registrieren oder Abrufen von Einstellungen Rufen Sie registrierte Helligkeits- oder Farbeinstellungen für Einstellungen bis und ab. Speichern häufig verwendeter Festlegen anderer Einstellungen Klicken Sie auf [Voreinstellungen], um verschiedene Einstellungen zu konfigurieren, darunter auch den Vorgang beim Scannen. Registerkarte [Vorschau] Konfigurieren Sie die Schritte für die Vorschau und das automatische Beschneiden.
[Scannen ohne ScanGear-Fenster] Wenn Sie die Dokumente mit einer OCR-Software oder einer anderen Anwendung scannen, wird der ScanGear MFBildschirm möglicherweise nicht angezeigt. In solch einem Fall wird das Dokument mit der Einstellung der verwendeten Anwendung gescannt. Wenn die Anwendung aber nicht über die folgenden Einstellungen verfügt, sollten Sie sie hier aktivieren, sodass diese Einstellungen auf den Scanvorgang angewendet werden.
[Speicherordner für temporäre Dateien wählen] Klicken Sie auf [Suche], um den Ordner zu ändern, in dem ein Bild vorübergehend gespeichert wird. [Audioeinstellungen] Sie können Musik oder Signaltöne einstellen, die während des Scannens oder beim Abschluss des Scannens wiedergegeben werden. Klicken Sie auf [Suche], um eine wiederzugebende Datei auszuwählen. Die folgenden Dateiformate werden unterstützt: MIDI-Dateien (.mid/.rmi/.midi) Audiodateien (.wav/.aif/.aiff) MP3-Dateien (.
3 Wählen Sie unter [Bevorzugte Einstellungen] die Option [Hinzufügen/Löschen]. Der Bildschirm [Bevorzugte Einstellungen hinzufügen/löschen] wird angezeigt. [Hinzufügen/Löschen] ist verfügbar, wenn das Vorschaubild angezeigt wird. 4 Geben Sie unter [Einstellungsname] einen Namen ein, und klicken Sie auf [Hinzufügen] [Speichern]. Geben Sie einen Namen für die zu registrierenden Einstellungen ein. Verwenden Sie einen Namen, der in der Dropdown-Liste leicht zu finden ist.
befolgen Sie die unten aufgeführten Schritte. 1 2 Legen Sie das Dokument oder die Dokumente ein, und klicken Sie auf [Vorschau]. Passen Sie die Helligkeit oder Farbe an. Anpassen der Helligkeit und Farbe Wählen Sie nach Bedarf die zur registrierenden Einstellungen. 3 Wählen Sie in der Dropdown-Liste die Option [Hinzufügen/Löschen]. Der Bildschirm [Farbtonkurveneinstellungen hinzufügen/löschen] oder [Grenzwerteinstellungen hinzufügen/löschen] wird angezeigt.
0W5F-05J Praktisches Scannen mit einem gerätbasierten Vorgang Das Gerät kann Originaldokumente ohne Computer in elektronische Dateiformate wie PDF umwandeln. Das Digitalisieren von Dokumenten hat viele Vorteile. Ihnen stehen zahlreiche praktische Einstellungen zur Verfügung, die Sie Ihren Vorstellungen entsprechend anpassen können.
0W5F-05K Direktes Speichern gescannter Dokumente auf einem USB-Speicher In diesem Abschnitt wird beschrieben, wie Dokumente gescannt und direkt auf einem USB-Speichergerät gespeichert werden, das an das Gerät angeschlossen ist. Sie können gescannte Dokumente als JPEG-Bilder, PDF-Dateien oder in anderen digitalen Dateiformaten speichern. Geeignete USB-Speichergeräte Sie können USB-Speichergeräte mit den folgenden Formatierungsarten verwenden.
5 Legen Sie die gewünschten Scaneinstellungen fest. Wählen Sie die Einstellungen aus. 6 Drücken Sie Festlegen detaillierter Einstellungen . Das Scannen beginnt. Wenn Sie das Scannen abbrechen wollen, tippen Sie auf . Wenn Sie in Schritt 2 Dokumente in die Zufuhr einlegen Wenn das Scannen abgeschlossen ist, werden die gescannten Daten auf dem USB-Speichergerät gespeichert.
3 4 Tippen Sie auf . Warten Sie, bis die Meldung angezeigt wird. 5 Trennen Sie das USB-Speichergerät vom Gerät.
0W5F-05L Direktes Versenden von Dokumenten als E-Mails über das Gerät Sie können wie beim Senden normaler E-Mails mehrere Empfänger festlegen, einschließlich CC-/BCC-Empfängern. 1 Legen Sie das Dokument oder die Dokumente ein. 2 Drücken Sie Einlegen von Dokumenten , und tippen Sie auf . Wenn der Anmeldebildschirm angezeigt wird, geben Sie mit den Zahlentasten den Benutzernamen und das Passwort ein. Wählen . Anmelden für Autorisiertes Senden.
6 Legen Sie die gewünschten Scaneinstellungen fest. Tippen Sie auf die Einstellungen. Festlegen detaillierter Einstellungen Der Dateiname eines gescannten Dokuments wird automatisch auf Grundlage des folgenden Formats zugewiesen: Kommunikationsverwaltungsnummer (vierstellig)_Datum und Uhrzeit des Sendevorgangs_Dokumentnummer (dreistellig).Dateierweiterung. Beispiel für einen Dateinamen: Wenn ein einseitiges Dokument in eine PDF-Datei umgewandelt und am 17. Oktober 2015 um 19:00:05 gesendet wird.
4 Tippen Sie auf . 5 Geben Sie mit den Zahlentasten den Nachrichtentext ein, und tippen Sie auf . Durch Tippen auf schalten Sie zwischen den Eingabemodi um. 6 Tippen Sie auf . So geben Sie eine Antwortadresse an 1 Tippen Sie auf . 2 Tippen Sie auf . 3 Wählen Sie eine Antwortadresse aus dem Adressbuch aus.
8 1 Tippen Sie auf . 2 Wählen Sie eine Prioritätsstufe aus. Drücken Sie , um das Senden zu starten. Das Scannen beginnt. Wenn der SMTP-Authentisierungsbildschirm angezeigt wird, geben Sie mit den Zahlentasten den Benutzernamen und das Passwort ein, und tippen Sie dann auf . Wenn Sie das Senden abbrechen wollen, tippen Sie auf . Wenn Sie in Schritt 1 Dokumente in die Zufuhr einlegen Die E-Mail wird gesendet, wenn das Scannen abgeschlossen ist.
3 Klicken Sie auf [Netzwerkeinstellungen] 4 Klicken Sie in [Mailbox löschen] auf [Löschen]. 5 Lesen Sie die angezeigte Meldung, und klicken Sie auf [OK]. [Einstellungen E-Mail/I-Fax]. Die E-Mail wird aus der Mailbox gelöscht. Wenn der Inhalt der Mailbox gelöscht wird Sobald im Meldungsfenster auf [OK] geklickt wird, werden alle E-Mails in der Servermailbox gelöscht.
behalten werden müssen.
0W5F-05R Direktes Speichern von Dokumenten in einem gemeinsamen Ordner/FTPServer Wenn Sie einen gemeinsamen Ordner als Empfänger auswählen wollen, können Sie nur im Adressbuch gespeicherte Empfänger auswählen. Wenn keine Empfänger gespeichert sind, speichern Sie Empfänger im Adressbuch, bevor Sie Dokumente für das Speichern in gemeinsamen Ordnern scannen. Festlegen eines gemeinsamen Ordners als Speicherort Speichern des Adressbuchs über Remote UI 1 Legen Sie das Dokument oder die Dokumente ein.
Der Dateiname eines gescannten Dokuments wird automatisch auf Grundlage des folgenden Formats zugewiesen: Kommunikationsverwaltungsnummer (vierstellig)_Datum und Uhrzeit des Sendevorgangs_Dokumentnummer (dreistellig).Dateierweiterungsname. Beispiel für einen Dateinamen: Wenn ein einseitiges Dokument in eine PDF-Datei umgewandelt und am 17. Oktober 2015 um 19:00:05 gesendet wird. 0045_151010191005_001.pdf Sie können die Dateinamen nicht selbst festlegen. 6 Drücken Sie , um das Scannen zu starten.
0W5F-05S Abbrechen des Sendevorgangs von Dokumenten (E-Mail/I-Fax/Gemeinsamer Ordner/FTP-Server) Wenn Sie das Senden eines Dokuments sofort nach Drücken von abbrechen möchten, tippen Sie auf dem Display auf , . Sie können das Senden von Dokumenten auch nach der Überprüfung des Sendestatus abbrechen.
LINKS Direktes Versenden von Dokumenten als E-Mails über das Gerät Senden von I-Faxen Direktes Speichern von Dokumenten in einem gemeinsamen Ordner/FTP-Server 㻞㻤㻝㻌㻛㻌㻣㻠㻠
0W5F-05U Festlegen detaillierter Einstellungen Dieser Abschnitt beschreibt die beim Scannen von Dokumenten verfügbaren Einstellungen. Diese Einstellungen umfassen das Festlegen des Dateiformats, in das die Dokumente umgewandelt werden, und das Anpassen der Dichte, um die Darstellung gescannter Dokumente so gut wie möglich zu verbessern, sowie die grundlegenden Einstellungen, wie das Festlegen der Dokumentausrichtung oder des Dokumentformats.
0W5F-05W Angeben eines Scanformats Sie können das Scanformat für die Dokumente angeben. Tippen Sie auf oder //, um Empfänger anzugeben.
0W5F-05X Auswählen eines Dateiformats Sie können das Dateiformat auswählen, in dem die gescannten Dokumente gespeichert werden. Sie können zwischen PDF/JPEG/TIFF wählen. Bei PDF können Sie zwischen PDF Kompakt mit einer geringeren Datengröße und PDF OCR (optische Zeichenerkennung) für das Durchsuchen von Text wählen. Mit können Sie die Sicherheit von PDF-Dateien erhöhen.
Generieren Sie eine PDF-Datei, die mit Adobe Acrobat/Adobe Reader/Adobe Acrobat Reader 7.0 oder höher kompatibel ist. Generieren Sie eine PDF-Datei, die mit Adobe Acrobat/Adobe Reader/Adobe Acrobat Reader 9.0 oder höher kompatibel ist. Generieren Sie eine PDF-Datei, die mit Adobe Acrobat/Adobe Reader/Adobe Acrobat Reader 10 oder höher kompatibel ist.
Die Datengröße ist stark komprimiert und reduziert, aber die Bildqualität ist niedrig. Das Komprimierungsverhältnis und die Bildqualität werden auf eine ausgewogene Einstellung zwischen und eingestellt. Die Bildqualität ist besser, aber das Datenkomprimierungsverhältnis sinkt und die Datengröße ist höher.
0W5F-05Y Justieren der Dichte Sie können die Dichte beim Scannen justieren, wenn Text oder Bilder in einem Dokument zu hell oder zu dunkel sind. Tippen Sie auf oder //, um Empfänger anzugeben. Justieren Sie die Dichte <-> Verringert die Dichte. <+> Erhöht die Dichte.
0W5F-060 Einstellen der Ausrichtung des Dokuments Sie können Hoch- oder Querformat einstellen. Tippen Sie auf oder /, um Empfänger anzugeben. Sie den Dokumententyp Wählen Sie diese Einstellung für Dokumente im Hochformat. Wählen Sie diese Einstellung für Dokumente im Querformat.
0W5F-061 Auswählen von Dokumententypen Sie können die Bildqualität für den Scan abhängig vom Dokumententyp auswählen, wie zum Beispiel NurText-Dokumente, Dokumente mit Diagrammen und Grafiken oder Zeitschriftenfotos. Tippen Sie auf oder //, um Empfänger anzugeben. Wählen Sie den Dokumententyp Geeignet für das Scannen von reinen Textdokumenten. Geeignet für das Scannen von Dokumenten mit Text und Fotos.
0W5F-062 Scannen doppelseitiger Dokumente Das Gerät kann automatisch die Vorder- und Rückseite von Dokumenten in der Zufuhr scannen. Wenn die Dokumente auf das Vorlagenglas gelegt werden, können nicht beide Seiten automatisch gescannt werden. Tippen Sie auf oder //, um Empfänger anzugeben.
0W5F-063 Justieren der Schärfe Sie können die Schärfe des Bildes vor dem Senden anpassen. Erhöhen Sie die Schärfe, um verschwommenen Text und Linien schärfer darzustellen, oder senken Sie die Schärfe, um die Darstellung von Zeitschriftenfotos zu verbessern. Tippen Sie auf oder //, um Empfänger anzugeben. Justieren Sie die Schärfe <-> Verringert die Schärfe und schwächt die Kontraste im Bild ab.
0W5F-064 Einstellen der Balance zwischen Dateigröße und Bildqualität Die gescannten Dokumente werden in die angegebenen Dateiformate umgewandelt. Zu diesem Zeitpunkt können Sie das Dateikomprimierungsverhältnis festlegen. erreicht ein höheres Komprimierungsverhältnis als normal, um kleinere Dateien mit niedrigerer Bildqualität zu erstellen.
0W5F-065 Einstellen von Gammawerten Die gescannten Dokumente werden in die angegebenen Dateiformate umgewandelt. Zu diesem Zeitpunkt können Sie die Gammawerte festlegen, die auf die Dokumente angewendet werden sollen. Sie können den gleichen Gammawert wie bei dem Monitor festlegen, der für die Anzeige der umgewandelten Dateien verwendet wird, sodass die Dateien mit der Helligkeit der Originaldokumente angezeigt werden.
0W5F-066 Senden unter Verwendung von gespeicherten Empfängern (E-Mail/IFax/Gemeinsamer Ordner/FTP-Server) Sie können Empfänger über die Zahlentasten festlegen oder indem Sie sie aus dem Adressbuch auswählen. Zur Verwendung des Adressbuchs müssen Sie die Empfänger zuvor im Adressbuch registrieren. Sie können auch zuvor verwendete Empfänger angeben. Wenn in Ihrem Büro ein LDAP-Server installiert ist, können Sie auch Empfänger auf dem Server angeben.
0W5F-067 Angeben aus dem Adressbuch Im Adressbuch können Sie einen Empfänger aus der Liste der gespeicherten Empfänger auswählen oder unter den Empfängern, für die ein Name gespeichert ist, nach einem Namen suchen. Sie müssen Empfänger im Adressbuch speichern, bevor Sie diese Funktionen nutzen können. Speichern von Daten im Adressbuch Festlegen eines gemeinsamen Ordners als Speicherort Speichern des Adressbuchs über Remote UI 1 Drücken Sie , und tippen Sie auf .
< > Zeigt Empfänger für Faxe an. Informationen zum Angeben von Empfängern mit dieser Registerkarte finden Sie in aus dem Adressbuch (Fax). Angeben > < Zeigt Empfänger für E-Mails an. > < Zeigt Empfänger für I-Faxe an. > < Zeigt gemeinsame Ordner/FTP-Server als Empfänger an. > < Zeigt eine Liste der für die Gruppenwahl gespeicherten Empfänger an. Diese Funktion steht beim Speichern gescannter Dokumente in gemeinsamen Ordnern/FTP-Servern nicht zur Verfügung. 5 Wählen Sie einen Empfänger aus.
Bevor Sie in Schritt 1 auswählen, können Sie durch Tippen auf / zwischen den angegebenen Empfängern umschalten. Zeigen Sie den Empfänger an, den Sie löschen möchten, und drücken .
0W5F-068 Direktauswahl von Empfängern durch Eingabe von Nummern für die kodierte Wahl Wenn Ihnen die 3-stellige Nummer (Nummer für die kodierte Wahl) bekannt ist, die dem Empfänger zugeordnet wurde, können Sie den Empfänger durch direkte Eingabe dieser Nummer angeben. Zur Verwendung der kodierten Wahl muss der Empfänger vorab im Adressbuch gespeichert werden.
1 Tippen Sie auf 2 Wählen Sie einen zu löschenden Empfänger aus. 3 Tippen Sie auf . . Wenn Sie in Schritt 2 für die Gruppenwahl gespeicherte Empfänger angegeben haben, wird auf dem Bildschirm angezeigt. Wählen Sie diese Option, um Einzelheiten zu den für die Gruppenwahl gespeicherten Empfängern anzuzeigen. 4 Tippen Sie auf .
0W5F-069 Angeben von zuvor verwendeten Empfängern Sie können einen Empfänger aus den drei zuletzt verwendeten Empfängern auswählen. Wenn Sie einen zuvor verwendeten Empfänger angeben, gelten dieselben Scaneinstellungen, wie die Dichte, die beim letzten Senden von Dokumenten an diesen Empfänger eingestellt waren. Wenn auf gesetzt ist, können Sie diese Funktion nicht verwenden.
0W5F-06A Angeben von auf einem LDAP-Server gespeicherten Empfängern (E-Mail/IFax) Wenn im Büro ein LDAP-Server installiert ist, können Sie auf dem Server gespeicherte Empfänger verwenden. Greifen Sie dazu über das Gerät auf den LDAP-Server zu, und suchen Sie den Empfänger. Sie müssen vorab die Einstellungen für die Verbindung zu dem LDAP-Server vornehmen. 1 Drücken Sie Speichern von LDAP-Servern , und tippen Sie auf .
Durch Tippen auf schalten Sie zwischen den Eingabemodi um (außer beim Suchen nach Faxnummern). Wenn Sie mehrere Suchkriterien angeben wollen, wiederholen Sie Schritt 4 und 5. 6 Tippen Sie auf . 7 Geben Sie das Suchverfahren an. Sucht die Empfänger, die allen in Schritt 4 und 5 angegebenen Suchkriterien entsprechen, und zeigt diese an.
1 Tippen Sie auf 2 Wählen Sie einen zu löschenden Empfänger aus. 3 Tippen Sie auf . 4 Tippen Sie auf . . Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 auswählen, können Sie durch Tippen auf / zwischen den angegebenen Empfängern umschalten. Zeigen Sie den Empfänger an, den Sie löschen möchten, und drücken .
0W5F-06C Anpassen der Scaneinstellungen je nach Anforderungen Die Standardeinstellungen sind die Einstellungen, die immer dann angezeigt werden, wenn Sie das Gerät einschalten oder wenn Sie drücken. Wenn Sie Ihre häufig verwendeten Scaneinstellungen als Standardeinstellungen speichern, müssen Sie nicht jedes Mal die gleichen Einstellungen konfigurieren, wenn Sie einen Scan erstellen.
0W5F-06E Ändern von Standardeinstellungen Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Scannen nicht jedes Mal die gewünschten Einstellungen erneut zu konfigurieren.
Einstellungen Wählen Sie die Option, die Sie einstellen wollen, und ändern Sie den Standardwert. Dateieinstellungen Ändern Sie den Standardwert der ausgewählten Option Einstellungen Wählen Sie die Option, die Sie einstellen wollen, und ändern Sie den Standardwert.
0W5F-06F Speichern häufig verwendeter Scaneinstellungen (E-Mail/IFax/Gemeinsamer Ordner/FTP-Server) Sie können bis zu 18 häufig verwendete Kombinationen der Scaneinstellungen speichern. Da gespeicherte Einstellungen nach Bedarf angezeigt werden können, sind nicht jedes Mal komplizierte Verfahren (z. B. die Einstellung des Dokumententyps, die Angabe von PDF (Kompakt) als Dateiformat und das Senden der Datei an alle internen Mitarbeiter) nötig.
6 7 Wählen Sie aus, wo die Einstellungen gespeichert werden sollen. Überprüfen Sie die Details der zu speichernden Einstellungen, und tippen Sie auf . Festlegen detaillierter Einstellungen Zum Ändern des Wertes einer zu speichernden Einstellung tippen Sie auf die Einstellung. Wenn Sie den Speicherempfänger umbenennen wollen, tippen Sie auf . 8 Eingeben von Text Wählen Sie aus, ob die Einstellungen als Schnellschaltfläche gespeichert werden sollen.
Empfänger können nach dem Speichern der Einstellungen nicht geändert werden. Wenn Sie einen Empfänger ändern wollen, löschen Sie die Einstellungen, und speichern Sie sie dann erneut. Wenn Sie einen Empfänger gespeichert haben, der aus dem Adressbuch angegeben wurde, und dann den Empfängereintrag im Adressbuch löschen, wird der Empfänger auch aus den bevorzugten Scaneinstellungen gelöscht.
0W5F-06H Überprüfen des Logs auf gesendete Dokumente (E-Mail/I-Fax/Gemeinsamer Ordner/FTP-Server) Das Log für gescannte Dokumente, die direkt vom Gerät gesendet wurden, kann im Listenformat überprüft werden. Wenn auf gesetzt ist, können Sie die Logs für gesendete Dokumente nicht anzeigen. Auftragslog anzeigen 1 2 3 Drücken Sie . Tippen Sie auf . Tippen Sie auf . Eine Liste der gesendeten Dokumente wird angezeigt.
0W5F-06J Kann bequem mit einem Mobilgerät verwendet werden Wenn Sie das Gerät in Kombination mit einem Mobilgerät wie einem Smartphone oder Tablet verwenden, können Sie ganz einfach drucken oder scannen. Das Gerät unterstützt AirPrint, sodass Sie direkt von einem iPhone/iPad drucken können, und Google Cloud Print™, sodass Sie unterwegs drucken können. Mithilfe dieser und verschiedener anderer Funktionen können Sie das Gerät für vielfältige Zwecke nutzen.
㻟㻝㻞㻌㻛㻌㻣㻠㻠
0W5F-06K Drucken/Scannen mit der Canon Mobilanwendung und dem Plug-in Sie können die Daten, die auf einem mit diesem Gerät verbundenen Smartphone/Tablet gespeichert sind, drucken und die mit dem Gerät gescannten Dokumente an das verbundene Smartphone/Tablet senden. Informationen zu kompatiblen Betriebssystemen, zur detaillierten Vorgehensweise bei der Einstellung und zur Vorgehensweise bei der Bedienung finden Sie auf der Canon Website unter: http://www.canon.com/.
0W5F-06L Drucken durch Halten eines Mobilgeräts an das Gerät (NFC) Dieses Gerät unterstützt die Standards von NFC (Nahfeldkommunikation). Wenn Sie ein NFC-kompatibles Mobilgerät an die NFCMarkierung am Bedienfeld des Geräts halten, können Sie die auf diesem Mobilgerät gespeicherten Fotos und Dokumente drucken. Informationen zu der Stelle, an die Sie das Mobilgerät halten, finden Sie unter Bedienfeld. Einstellen des Mobilgeräts Stellen Sie das Gerät so ein, dass seine NFC-Funktion aktiviert ist.
0W5F-06R Herstellen einer einfachen drahtlosen Verbindung über die direkte Verbindung (Access Point-Modus) Auch in einer Umgebung ohne Access Points oder Wireless LAN-Router können Sie über Ihr Mobilgerät eine direkte Verbindung zum Gerät herstellen. Auf diese Weise können Sie ohne komplizierte Verbindungseinstellungen und wann immer Sie wollen über Ihr Mobilgerät drucken. Verwenden des Geräts mit direkter Verbindung (im Access Point-Modus) Sie können dieses Gerät als Access Point verwenden.
Drucken durch Halten eines Mobilgeräts an das Gerät (NFC) (MF729Cx) 㻟㻝㻢㻌㻛㻌㻣㻠㻠
0W5F-06S Verwenden von Remote UI über ein Mobilgerät Sie können Remote UI über einen auf Ihrem Mobilgerät installierten Webbrowser verwenden. Auf diese Weise können Sie den Status des Geräts überprüfen und Einstellungen des Geräts über Ihr Mobilgerät angeben. Unterstützte Browser Die folgenden Browser sind mit Remote UI für Mobilgeräte kompatibel.
0W5F-06U Verwenden von AirPrint Sie können ohne Treiber drucken, scannen oder faxen, indem Sie Druckdaten von Apple-Geräten übertragen.
4 Klicken Sie auf [Bearbeiten]. 5 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK]. [AirPrint verwenden] Aktivieren Sie das Kontrollkästchen, um AirPrint zu aktivieren. Zum Deaktivieren von AirPrint deaktivieren Sie das Kontrollkästchen. [Druckername]/[Ort]/[Breitengrad]/[Längengrad] Geben Sie als Informationen, mit denen Sie dieses Gerät beim Bedienen des Apple-Geräts identifizieren können, den Namen und den Aufstellort ein.
Rufen Sie den Bildschirm für AirPrint auf, auf dem Sie nicht nur auf die AirPrint-Einstellungen zugreifen, sondern auch Informationen zu Verbrauchsmaterial wie Papier und Tonerpatronen anzeigen können. Darüber hinaus können Sie die Einstellungen der Sicherheitsfunktion konfigurieren ( Konfigurieren der IEEE 802.1X-Authentisierung). 1 2 3 4 Klicken Sie auf dem Desktop im Dock auf [Systemeinstellungen] [Drucker & Scanner]. Wählen Sie den Drucker, und klicken Sie auf [Optionen & Füllstände].
0W5F-06W Drucken mit AirPrint Zum Drucken von E-Mails, Fotos, Webseiten und anderen Dokumenten benötigen Sie nicht unbedingt einen Computer. Mit AirPrint können Sie direkt von Apple-Geräten wie iPad, iPhone und iPod touch drucken. Drucken von einem iPad, iPhone oder iPod touch Drucken über Mac Systemanforderungen Für das Drucken mit AirPrint benötigen Sie eines der folgenden Apple-Geräte. iPad (alle Modelle) iPhone (3GS oder höher) iPod touch (3. Generation oder höher) Mac (Mac OS X 10.
6 Tippen Sie auf [Drucken]. Das Drucken beginnt. Überprüfen des Druckstatus Drücken Sie während des Druckvorgangs zweimal die Home-Taste des Apple-Geräts tippen Sie auf [Drucken]. Drucken über Mac 1 Vergewissern Sie sich, dass das Gerät eingeschaltet und mit dem Mac verbunden ist. Informationen zur Überprüfung der Verbindung finden Sie im Handbuch "Erste Schritte". 2 Fügen Sie das Gerät über [Systemeinstellungen] Dem Gerät beiliegende Dokumente [Drucker & Scanner] dem Mac hinzu.
0W5F-06X Scannen mit AirPrint Sie können mit AirPrint die vom Gerät gescannten Daten direkt an einen Mac übertragen. Systemanforderungen Für das Scannen mit AirPrint benötigen Sie einen Mac, auf dem Mac OS X 10.9 oder höher installiert ist. Netzwerkumgebung Sie benötigen eine der folgenden Umgebungen. Der Mac und das Gerät sind mit demselben LAN verbunden. Der Mac und das Gerät sind über USB miteinander verbunden. Bei Verwendung einer USB-Verbindung Setzen Sie auf .
Der Scanvorgang wird gestartet, und die gescannten Daten werden angezeigt. Wenn auf gesetzt ist, schalten Sie das Gerät zunächst online, indem Sie auf dem Bildschirm in der genauen Reihenfolge auf tippen, und starten Sie dann den Einstellungen Remote UI Scanvorgang. Sie können nicht scannen, während Einstellungen für das Drucken, Kopieren oder Faxen vorgenommen werden oder das Gerät einen anderen Vorgang durchführt.
0W5F-06Y Faxen mit AirPrint Mit AirPrint können Sie Faxe über einen Mac fast auf dieselbe Weise senden als wenn Sie über einen Mac drucken. Systemanforderungen Für das Senden von Faxen mit AirPrint benötigen Sie einen Mac, auf dem Mac OS X 10.9 oder höher installiert ist. Netzwerkumgebung Sie benötigen eine der folgenden Umgebungen. Der Mac und das Gerät sind mit demselben LAN verbunden. Der Mac und das Gerät sind über USB miteinander verbunden.
0W5F-070 Wenn AirPrint nicht verwendet werden kann Wenn AirPrint nicht verwendet werden kann, probieren Sie die folgenden Lösungsansätze. Vergewissern Sie sich, dass das Gerät eingeschaltet ist. Wenn das Gerät eingeschaltet ist, schalten Sie es zunächst aus, warten Sie anschließend mindestens 10 Sekunden lang, und schalten Sie es dann wieder ein, um zu prüfen, ob das Problem damit behoben ist. Vergewissern Sie sich, dass auf dem Gerät keine Fehlermeldungen angezeigt werden.
0W5F-071 Verwenden von Google Cloud Print Mit dem Dienst Google Cloud Print kann ein Benutzer mit einem Google-Konto mithilfe eines mit dem Internet verbundenen Smartphones, Tablets oder Computers von Anwendungen wie Google Docs™ oder Gmail™ aus drucken. Anders als beim herkömmlichen Drucken von einem Computer aus können Sie mit der neuen Google Cloud Print-Technologie drucken, indem Sie einen Drucker direkt mit dem Internet verbinden.
0W5F-072 Drucken mit Google Cloud Print Wenn Sie mit Google Cloud Print drucken wollen, registrieren Sie das Gerät bei Google Cloud Print. Überprüfen der Geräteeinstellungen Ändern von Google Cloud Print-Einstellungen Registrieren des Geräts bei Google Cloud Print Wenn Sie Google Cloud Print nutzen wollen, ist ein Google-Konto erforderlich. Wenn Sie keins haben, rufen Sie zum Erstellen eines Kontos die Google-Website auf.
3 Klicken Sie auf [Netzwerkeinstellungen] 4 Klicken Sie in [Registrierungsstatus] auf [Registrieren]. [Einstellungen Google Cloud Print]. Wenn [Registrieren] nicht verfügbar ist Sie müssen Google Cloud Print aktivieren. Klicken Sie auf [Bearbeiten], aktivieren Sie das Kontrollkästchen [Google Cloud Print verwenden], und klicken Sie auf [OK]. So registrieren Sie das Gerät erneut So registrieren Sie das Gerät erneut, wenn sich der Besitzer des Geräts geändert hat oder aus anderen Gründen.
6 7 Registrieren Sie das Gerät nach den Bildschirmanweisungen. Für den Druckvorgang starten Sie eine mit Google Cloud Print kompatible Anwendung wie Google Chrome™, Gmail oder Google Docs auf einem Informationsterminalgerät wie einem Computer oder Smartphone. Auf der Google Cloud Print-Website finden Sie Informationen zu den neuesten Anwendungen, die Google Cloud Print unterstützen.
0W5F-073 Netzwerk Das Gerät wurde für den flexiblen Einsatz in verschiedensten Umgebungen entwickelt und bietet zusätzlich zu den grundlegenden Netzwerkfunktionen modernste Technologien. Für die Konfiguration müssen Sie aber kein Netzwerkexperte sein, denn das Gerät ist ganz auf komfortable Bedienung und Anwenderfreundlichkeit ausgelegt. Nehmen Sie die Netzwerkkonfiguration wie beschrieben einfach Schritt für Schritt vor.
0W5F-074 Anschließen an ein Netzwerk Wenn Sie das Gerät an ein Wired LAN oder ein Wireless LAN anschließen, müssen Sie eine für das ausgewählte Netzwerk eindeutige IPAdresse einstellen. Wählen Sie "Wired" oder "Wireless" je nach Kommunikationsumgebung und Netzwerkgeräten aus. Informationen zu spezifischen IP-Adresseinstellungen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator.
Herstellen einer Verbindung zu einem Wired LAN Herstellen einer Verbindung zu einem WLAN (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw) Stellen Sie bei Bedarf die IP-Adresse ein. Werkseitig ist das Gerät so eingestellt, dass eine IP-Adresse automatisch abgerufen wird. Ändern Sie diese Einstellung, wenn Sie eine bestimmte IP-Adresse verwenden wollen.
0W5F-075 Auswählen von verkabeltem LAN oder WLAN Nachdem Sie festgelegt haben, ob das Gerät über ein Wired LAN oder Wireless LAN mit dem Computer verbunden wird, wählen Sie über das Bedienfeld die Einstellung für Wired LAN oder Wireless LAN. Beachten Sie, dass Sie die auf dem Computer installierten MF-Treiber deinstallieren und erneut installieren müssen, wenn Sie die Einstellung in ändern oder umgekehrt. Details finden Sie im Installationshandbuch für den MF-Treiber.
0W5F-076 Herstellen einer Verbindung zu einem Wired LAN Verbinden Sie das Gerät über einen Router mit einem Computer. Schließen Sie das Gerät mit einem LAN-Kabel an den Router an. 1 Schließen Sie ein LAN-Kabel an. Schließen Sie das Gerät über ein LAN-Kabel an einen Router an. Schieben Sie den Stecker in die Buchse, bis er mit einem Klicken einrastet. 2 Warten Sie etwa 2 Minuten. Währenddessen wird die IP-Adresse automatisch eingestellt. Sie können die IP-Adresse manuell einstellen.
0W5F-077 Herstellen einer Verbindung zu einem WLAN Ein Wireless LAN-Router (oder Access Point) stellt die Verbindung zwischen dem Gerät und dem Computer über Funk her. Sofern der Wireless LAN-Router mit WPS (Wi-Fi Protected Setup) ausgestattet ist, können Sie das Netzwerk ganz einfach automatisch konfigurieren.
Konfiguration der Verbindung über die Eingabe des WPS-PIN-Codes Wenn der Wireless LAN-Router auf die Verwendung der WEP-Authentisierung eingestellt ist, können Sie die Verbindung unter Umständen nicht mit WPS konfigurieren. Manuelles Konfigurieren der Verbindung Wenn Sie eine Wireless LAN-Verbindung manuell konfigurieren, können Sie einen Wireless LAN-Router auswählen oder die benötigten Informationen manuell eingeben.
0W5F-078 Konfiguration der Verbindung über die WPS-Taste Wenn der Wireless LAN-Router die Konfiguration über die WPS-Taste unterstützt, können Sie die Verbindung ganz einfach mit einem Tastendruck konfigurieren. Die Bedienung des Wireless LAN-Routers kann sich je nach Gerät unterscheiden. Näheres dazu finden Sie in den Anleitungen zum verwendeten Netzwerkgerät. 1 2 Tippen Sie auf dem Bildschirm auf . Tippen Sie auf .
Nach Abschluss der Konfiguration wird der unten abgebildete Bildschirm angezeigt, und etwa 2 Sekunden später leuchtet die WiFi-Anzeige auf. Warten Sie etwa 2 Minuten, bis die IP-Adresseinstellung des Geräts abgeschlossen ist. Signalstärke Wenn mehr als ein Wireless LAN-Router vorhanden ist, mit dem eine Verbindung hergestellt werden kann, stellt dieses Gerät die Verbindung mit dem Router mit dem stärksten Signal her. Die Signalstärke wird mittels RSSI (Received Signal Strength Indication) gemessen.
0W5F-079 Konfiguration der Verbindung über die Eingabe des WPS-PIN-Codes Wenn der Wireless LAN-Router die Konfiguration über die Eingabe des WPS-PIN-Codes unterstützt, generieren Sie mit dem Gerät einen PIN-Code, und speichern Sie diesen im Netzwerkgerät. Die Bedienung des Wireless LAN-Routers kann sich je nach Gerät unterscheiden. Näheres dazu finden Sie in den Anleitungen zum verwendeten Netzwerkgerät.
Auf dem Bedienfeld 9 Überprüfen Sie, ob die Wi-Fi-Anzeige auf dem Bedienfeld blinkt. Die Wi-Fi-Anzeige blinkt, wenn ein Wireless LAN-Router erkannt wird. Nach Abschluss der Konfiguration wird der unten abgebildete Bildschirm angezeigt, und etwa 2 Sekunden später leuchtet die WiFi-Anzeige auf. Warten Sie etwa 2 Minuten, bis die IP-Adresseinstellung des Geräts abgeschlossen ist.
0W5F-07A Konfiguration der Verbindung durch Auswahl eines Wireless LAN-Routers Sie können die Wireless LAN-Router (oder Access Points) suchen, mit denen eine Verbindung hergestellt werden kann, und einen im Display des Geräts auswählen. Geben Sie als Netzwerkschlüssel einen WEP- oder TKIP-Schlüssel ein.
Tippen Sie auf , und wählen Sie den Wireless LAN-Router aus. Wenn Sie zum ursprünglichen Bildschirm zurückkehren . möchten, tippen Sie zweimal auf , und drücken Sie dann Wenn der gewünschte Wireless LAN-Router nicht gefunden wird Prüfen Sie, ob das Gerät ordnungsgemäß installiert und für eine Verbindung mit dem Netzwerk bereit ist. Installation/Einstellungen 8 Probleme mit Geben Sie den zuvor notierten Netzwerkschlüssel ein.
Reduzieren des Stromverbrauchs Sie können das Gerät so einstellen, dass es je nach den vom Wireless LAN-Router ausgegebenen Signalen in den Modus Energiesparmodus wechselt. Wenn sich die IP-Adresse des Geräts geändert hat In einer DHCP-Umgebung ändert sich die IP-Adresse des Geräts möglicherweise automatisch. In diesem Fall wird die Verbindung aufrechterhalten, solange das Gerät und der Computer zu demselben Subnet gehören.
0W5F-07C Konfiguration der Verbindung durch Festlegen detaillierter Einstellungen Wenn Sie detaillierte Sicherheitseinstellungen festlegen möchten oder die Wireless LAN-Verbindung anhand der anderen Verfahren nicht herstellen können, geben Sie alle für die Wireless LAN-Verbindung benötigten Informationen manuell ein.
Verbindung herzustellen. 3 Tippen Sie auf . 4 Wählen Sie den WEP-Schlüssel (1 bis 4), den Sie bearbeiten wollen. Bis zu vier WEP-Schlüssel können gespeichert werden. 5 Geben Sie den zuvor notierten Netzwerkschlüssel ein. Geben Sie mit den Zahlentasten den Netzwerkschlüssel ein, und tippen Sie auf . Text 6 Tippen Sie auf . 7 Tippen Sie auf den WEP-Schlüssel, den Sie bearbeitet haben.
8 Tippen Sie auf . Wenn während der Konfiguration eine Fehlermeldung angezeigt wird Tippen Sie auf , überprüfen Sie, ob die angegebenen Einstellungen korrekt sind, und fangen Sie wieder mit Schritt 5 an. 9 Überprüfen Sie, ob die Wi-Fi-Anzeige auf dem Bedienfeld blinkt. Die Wi-Fi-Anzeige blinkt, wenn ein Wireless LAN-Router erkannt wird. Nach Abschluss der Konfiguration wird der unten abgebildete Bildschirm angezeigt, und etwa 2 Sekunden später leuchtet die WiFi-Anzeige auf.
0W5F-07E Überprüfen von SSID und Netzwerkschlüssel Bei der manuellen Konfiguration einer Wireless LAN-Verbindung müssen Sie die SSID und den Netzwerkschlüssel des Wireless LANRouters eingeben. Die SSID und der Netzwerkschlüssel sind unter Umständen auf den verwendeten Netzwerkgeräten angegeben. Überprüfen Sie die Geräte, und notieren Sie die benötigten Informationen, bevor Sie die Verbindung konfigurieren.
4 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Yes], wenn Sie dieser zustimmen. 5 Überprüfen Sie die für den Wireless LAN-Router angezeigten Informationen. Notieren Sie die benötigten Informationen. Wenn Sie nicht wissen, welche Informationen Sie benötigen, notieren Sie alle angezeigten Informationen. Wenn keine Wireless LAN-Router gefunden werden Klicken Sie auf [Refresh].
0W5F-07F Einstellen von IP-Adressen Wenn Sie das Gerät mit einem Netzwerk verbinden, ist eine eindeutige IP-Adresse im Netzwerk erforderlich. Zwei Versionen von IPAdressen stehen zur Verfügung: IPv4 und IPv6. Konfigurieren Sie diese Einstellungen je nach Netzwerkumgebung. Wenn Sie IPv6Adressen verwenden möchten, müssen Sie die IPv4-Adresseinstellungen richtig konfigurieren.
0W5F-07H Einstellen der IPv4-Adresse Die IPv4-Adresse des Geräts kann über ein Protokoll für die dynamische IP-Adressierung, beispielsweise DHCP, automatisch zugewiesen oder manuell eingegeben werden. Wenn Sie das Gerät an ein verkabeltes LAN anschließen, vergewissern Sie sich, dass die Stecker des LAN-Kabels fest in den Anschlüssen sitzen ( Herstellen einer Verbindung zu einem Wired LAN). Falls erforderlich, können Sie die Netzwerkverbindung testen.
3 Überprüfen Sie, ob auf gesetzt ist. Wenn ausgewählt ist, ändern Sie die Einstellung in . 4 Tippen Sie auf . Über DHCP zugewiesene IP-Adressen haben Vorrang vor den mit Auto IP abgerufenen Adressen. Manuelles Eingeben einer IP-Adresse 1 Überprüfen Sie, ob auf gesetzt ist. Wenn angezeigt wird, tippen Sie auf , und setzen Sie und auf . 2 Tippen Sie auf .
Wenn die Verbindung ordnungsgemäß hergestellt wurde, wird das Ergebnis wie oben abgebildet angezeigt.
0W5F-07J Einstellen von IPv6-Adressen Die IPv6-Adressen des Geräts können Sie über Remote UI konfigurieren. Überprüfen Sie die IPv4Adresseinstellungen ( Anzeigen von IPv4-Einstellungen), bevor Sie IPv6-Adressen einstellen. Sie müssen die richtigen IPv4-Einstellungen festlegen, wenn Sie IPv6-Adressen verwenden wollen. Beachten Sie, dass die Scanfunktion, die den Scannertreiber oder MF Scan Utility nutzt, in einer IPv6-Umgebung nicht zur Verfügung steht.
5 Aktivieren Sie das Kontrollkästchen [IPv6 verwenden], und konfigurieren Sie die erforderlichen Einstellungen. [IPv6 verwenden] Aktivieren Sie das Kontrollkästchen, um IPv6 am Gerät zu aktivieren. Wenn Sie IPv6 nicht verwenden, deaktivieren Sie das Kontrollkästchen. [Zustandslose Adresse] Aktivieren Sie das Kontrollkästchen, wenn Sie eine zustandslose Adresse verwenden. Wenn Sie keine zustandslose Adresse verwenden, deaktivieren Sie das Kontrollkästchen.
Überprüfen der Einstellungen Vergewissern Sie sich, dass am Computer der Remote UI-Bildschirm angezeigt werden kann, indem Sie die IPv6-Adresse des Starten von Remote UI Geräts verwenden. Auswählen von Einstellungen über das Bedienfeld Sie können auch über auf dem Bildschirm auf die IPv6-Einstellungen zugreifen.
0W5F-07K Anzeigen von Netzwerkeinstellungen Anzeigen von IPv4-Einstellungen Anzeigen von IPv6-Einstellungen Anzeigen der MAC-Adresse für WLAN Anzeigen der MAC-Adresse und der Informationen für WLAN (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw) Wenn "0.0.0.0" als IP-Adresse angezeigt wird, ist sie nicht korrekt konfiguriert. Wenn Sie das Gerät an einen Switching-Hub oder eine Bridge anschließen, kann es auch bei einer korrekt konfigurierten IPAdresse zu einem Kommunikationsfehler kommen.
3 Tippen Sie auf . Anzeigen der MAC-Adresse und der Informationen für WLAN (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw) 1 2 Tippen Sie auf dem Bildschirm auf . Tippen Sie auf . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und die richtige PIN ein, und drücken Sie . Anmelden am Gerät dann 3 Tippen Sie auf .
Konfigurieren von DNS 㻟㻡㻥㻌㻛㻌㻣㻠㻠
0W5F-07L Konfigurieren der Einstellungen für die direkte Verbindung (Access PointModus) Verbinden Sie ein Mobilgerät drahtlos und direkt ohne Routing über einen Wireless LAN-Router (oder Access Point) mit dem Gerät. Herstellen einer einfachen drahtlosen Verbindung über die Informationen zum Druck über die direkte Verbindung finden Sie unter direkte Verbindung (Access Point-Modus) (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw).
0W5F-07R Konfigurieren des Geräts für das Drucken oder Faxen von einem Computer aus Wenn Sie das Gerät als Netzwerkdrucker oder zum Senden von Faxen vom PC aus verwenden, können Sie die Protokolle und Ports für das Drucken konfigurieren und einen Druckserver für das Gerät erstellen. Bevor Sie das Gerät für das Drucken oder Faxen von einem Computer aus konfigurieren können, müssen Sie die grundlegenden Konfigurationsschritte ausführen.
0W5F-07S Konfigurieren von Druckprotokollen und WSD-Funktionen Konfigurieren Sie die Protokolle für das Drucken von Dokumenten von einen Computer im Netzwerk aus. Das Gerät unterstützt unter anderem die Protokolle LPD, RAW und WSD (Web Services on Devices). Informationen zum Ändern der Portnummern eines Protokolls finden Sie in 1 2 Ändern von Portnummern. Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung].
[LPD-Druck verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie über LPD drucken wollen. Wenn Sie das Drucken über LPD nicht verwenden, deaktivieren Sie das Kontrollkästchen. [RAW-Druck verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie über RAW drucken wollen. Wenn Sie das Drucken über RAW nicht verwenden, deaktivieren Sie das Kontrollkästchen. [EM-Timeout] Legen Sie einen Wert zwischen 1 und 60 (Minuten) als Neustartwartezeit für den Datenempfang fest.
[Multicast Discovery verwenden] Aktivieren Sie das Kontrollkästchen, wenn das Gerät auf Multicast-Discovery-Nachrichten reagieren soll. Wenn Sie das Kontrollkästchen deaktivieren, bleibt das Gerät auch dann im Schlafmodus, wenn Multicast-Discovery-Nachrichten im Netzwerk vorhanden sind. 3 5 Klicken Sie auf [OK]. Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
0W5F-07U Konfigurieren von Druckerports Es kann zu Fehlern beim Drucken kommen, wenn sich die IP-Adresse des Geräts geändert hat oder wenn über den WindowsDruckerordner ein Drucker hinzugefügt wurde. Diese Fehler sind normalerweise auf fehlerhafte Druckerporteinstellungen zurückzuführen. Eventuell wurde eine falsche Portnummer oder ein falscher Porttyp angegeben. In solchen Fällen schlägt das Drucken fehl, weil die Dokumentendaten nicht an das Gerät übertragen werden können.
3 Klicken Sie auf [Automatische Erkennung], wählen Sie das Gerät aus, sobald es erkannt wurde, und klicken Sie auf [Weiter]. Wenn das Gerät nicht erkannt wird Klicken Sie auf [Aktualisieren]. Wenn das Problem erneut auftritt, klicken Sie auf [IP-Adresse] oder [MACAdresse], geben Sie die IP- oder MAC-Adresse des Geräts ein Anzeigen von Netzwerkeinstellungen, und klicken Sie dann auf [Weiter]. 4 Klicken Sie auf [Hinzufügen] 5 Klicken Sie auf [Schließen]. [Endverarbeitung].
LINKS Konfigurieren eines Druckservers 㻟㻢㻣㻌㻛㻌㻣㻠㻠
0W5F-07W Konfigurieren eines Druckservers Mit einem Druckserver können Sie die Arbeitslast auf dem zum Drucken verwendeten Computer verringern. Außerdem können die einzelnen Computer mit dem Druckserver die MF-Treiber über das Netzwerk installieren, sodass Sie sie nicht einzeln mit der mitgelieferten DVD-ROM auf jedem Computer installieren müssen. Wenn Sie einen Computer im Netzwerk als Druckserver einrichten möchten, konfigurieren Sie die Einstellungen für den freigegebenen Drucker.
Wenn [Freigabeoptionen ändern] angezeigt wird Klicken Sie auf [Freigabeoptionen ändern]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird, klicken Sie auf [Ja] oder [Fortsetzen]. 4 Installieren Sie bei Bedarf weitere Treiber. Dieser Schritt ist erforderlich, wenn Sie MF-Treiber über den Druckserver auf anderen Computern mit einer anderen Systemarchitektur installieren möchten. 1 Klicken Sie auf [Zusätzliche Treiber].
Installieren von MF-Treibern auf einem Computer über den Druckserver 1 2 3 Suchen Sie den freigegebenen Drucker auf dem Druckserver. dem Druckserver Doppelklicken Sie auf den freigegebenen Drucker. Installieren Sie die Treiber nach den Bildschirmanweisungen.
0W5F-07X Konfigurieren von Scaneinstellungen (E-Mail/I-Faxe/Gemeinsame Ordner/FTP-Server) Wenn Sie gescannte Originale direkt per E-Mail oder I-Fax senden möchten oder sie in gemeinsamen Ordnern oder auf FTP-Servern speichern möchten, müssen Sie das Netzwerk konfigurieren. Das mit dem Gerät gelieferte Tool für die Einstellung der Sendefunktion unterstützt Sie bei der erforderlichen Konfiguration. Legen Sie die nötigen Konfigurationseinstellungen je nach Zweck und Netzwerkumgebung fest.
0W5F-07Y Konfigurieren von Scaneinstellungen (Senden von E-Mails, Senden & Empfangen von I-Faxen) Bevor Sie das Gerät so konfigurieren, dass Sie nach dem Scannen eine E-Mail senden können, prüfen Sie die folgenden Konfigurationsschritte. Vergewissern Sie sich, dass das Gerät und der Computer richtig angeschlossen sind.
0W5F-080 Konfigurieren grundlegender E-Mail-Einstellungen Das Tool für die Einstellung der Sendefunktion unterstützt Sie beim Konfigurieren der E-Mail-Einstellungen. Mit diesem Tool können Sie auch E-Mail-Adressen im Adressbuch speichern. Remote UI bietet detailliertere Einstellungen als das Tool für die Einstellung der Sendefunktion ( Konfigurieren von Einstellungen für die E-Mail-/I-Fax-Kommunikation).
Wenn der unten abgebildete Bildschirm angezeigt wird Klicken Sie auf [Ja]. 5 Wählen Sie das Gerät unter [Geräteliste] aus, und klicken Sie auf [Weiter]. Wenn das Gerät nicht unter [Geräteliste] angezeigt wird Klicken Sie auf [Erneut suchen]. Wenn das Problem erneut auftritt, klicken Sie auf [Durch IP-Adresse suchen], geben Sie die IP-Adresse des Geräts ein, und klicken Sie dann auf [OK]. 6 2 Überprüfen Sie die Einstellungen, und klicken Sie auf [OK]. Klicken Sie auf [Start].
Wenn ein Bildschirm erscheint, in dem Sie zur Eingabe der PIN für das Adressbuch aufgefordert werden, geben Sie die PIN für Festlegen einer PIN für das Adressbuch das Adressbuch ein, und klicken Sie auf [OK]. 4 Legen Sie die nötigen Einstellungen fest. [Registrierung] [Favoritennummer] Mit dem Tool für die Einstellung der Sendefunktion können Sie eine E-Mail-Adresse unter im Adressbuch speichern. Wählen Sie eine Nummer aus der Dropdown-Liste aus.
6 7 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Je nach dem verwendeten Netzwerk sind unter Umständen zusätzliche Einstellungen erforderlich. Weitere Informationen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator. Informationen zum Aktivieren von SSL für E-Mails finden Sie in Kommunikation.
0W5F-081 Konfigurieren von Einstellungen für die E-Mail-/I-Fax-Kommunikation Verwenden Sie vor dem Senden von E-Mails oder I-Faxen Remote UI, um die detaillierten Sende- und Empfangseinstellungen zu konfigurieren, wie die Einstellungen zur Verwendung des Geräts für das Senden und Empfangen von I-Faxen und die Einstellungen für die POP-Authentisierung und Verschlüsselung. Die erforderlichen Einstellungen erhalten Sie von Ihrem Anbieter oder Netzwerkadministrator.
[SMTP-Server] Geben Sie bis zu 48 alphanumerische Zeichen als SMTP-Servername (oder IP-Adresse) für das Senden von E-Mails und I-Faxen ein. [E-Mail-Adresse] Geben Sie bis zu 120 Zeichen für die E-Mail-Adresse ein, die für das Gerät verwendet werden soll. [POP-Server] Geben Sie bis zu 48 alphanumerische Zeichen als SMTP-Servername oder IP-Adresse für das Senden von E-Mails und I-Faxen ein.
[POP-Authentisierung vor Senden verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie den POP3-Server für die Authentisierung verwenden. [APOP-Authentisierung verwenden] Aktivieren Sie das Kontrollkästchen, wenn das Passwort während der Authentisierung mit APOP verschlüsselt werden soll. [SMTP-Authentisierung (SMTP AUTH) verwenden] Aktivieren Sie das Kontrollkästchen, und geben Sie bis zu 64 Zeichen in das Textfeld [Anwendername] ein, wenn Sie die Authentisierung über den SMTP-Server aktivieren.
0W5F-082 Konfigurieren des Geräts für das Speichern gescannter Dokumente in gemeinsamen Ordnern Bevor Sie das Gerät so konfigurieren, dass Sie nach dem Scannen die Daten in einem freigegebenen Ordner speichern können, prüfen Sie die folgenden Konfigurationsschritte. Vergewissern Sie sich, dass das Gerät und der Computer richtig angeschlossen sind.
0W5F-083 Festlegen eines gemeinsamen Ordners als Speicherort Das Speichern gescannter Dokumente in gemeinsamen Ordnern wird auch als "SMB-Scan" bezeichnet, da bei dieser Funktion die SMBTechnologie (Server Message Block) von Windows genutzt wird. SMB ist ein Protokoll für die Freigabe von Ressourcen wie Dateien und Druckern für mehr als ein Gerät in einem Netzwerk ( Konfigurieren von SMB ).
Wenn der unten abgebildete Bildschirm angezeigt wird Klicken Sie auf [Ja]. 5 Wählen Sie das Gerät unter [Geräteliste] aus, und klicken Sie auf [Weiter]. Wenn das Gerät nicht unter [Geräteliste] angezeigt wird Klicken Sie auf [Erneut suchen]. Wenn das Problem erneut auftritt, klicken Sie auf [Durch IP-Adresse suchen], geben Sie die IP-Adresse des Geräts ein, und klicken Sie dann auf [OK]. 6 2 Überprüfen Sie die Einstellungen, und klicken Sie auf [OK]. Klicken Sie auf [Start].
Wenn ein Bildschirm erscheint, in dem Sie zur Eingabe der PIN für das Adressbuch aufgefordert werden, geben Sie die PIN für Festlegen einer PIN für das Adressbuch das Adressbuch ein, und klicken Sie auf [OK]. 4 Legen Sie die nötigen Einstellungen fest. [Registrierung] [Favoritennummer] Mit dem Tool für die Einstellung der Sendefunktion können Sie einen gemeinsamen Ordner zum Speichern gescannter Dokumente unter im Adressbuch speichern. Wählen Sie eine Nummer aus der Dropdown-Liste aus.
[Beschränkungen für den gemeinsamen Ordner zulassen] Klicken Sie je nach den Zugriffseinschränkungen für den gemeinsamen Ordner auf das Optionsfeld [Nicht eingestellt] oder [Eingestellt]. Wenn Sie [Eingestellt] wählen, geben Sie den Anwendernamen in das Textfeld [Gespeicherter Anwendername] und das Passwort in das Textfeld [Zugangspasswort] ein. 5 6 7 Klicken Sie auf [Weiter]. Überprüfen Sie die Einstellungen, und klicken Sie auf [Registrieren]. Starten Sie das Gerät neu.
0W5F-084 Konfigurieren des Geräts für das Speichern gescannter Dokumente auf FTPServern Bevor Sie das Gerät so konfigurieren, dass Sie nach dem Scannen die Daten auf einem FTP-Server speichern können, prüfen Sie die folgenden Konfigurationsschritte. Vergewissern Sie sich, dass das Gerät und der Computer richtig angeschlossen sind.
0W5F-085 Konfigurieren des PASV-Modus für FTP PASV ist ein FTP-Kommunikationsmodus für die Dateiübertragung. Wenn Sie durch eine Firewall eine Verbindung zu einem FTP-Server herstellen wollen, müssen Sie den PASV-Modus verwenden. Überprüfen Sie zunächst, ob der PASV-Modus auf dem FTP-Server eingestellt ist. Ob der PASV-Modus für FTP verwendet wird, hängt von Ihrer Netzwerkumgebung und den Einstellungen auf dem FTP-Server ab, an den Daten gesendet werden.
5 Aktivieren Sie das Kontrollkästchen [Modus FTP PASV verwenden], und klicken Sie auf [OK]. [Modus FTP PASV verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie den PASV-Modus verwenden wollen. Wenn Sie den PASV-Modus nicht verwenden, lassen Sie das Kontrollkästchen deaktiviert. 6 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
0W5F-086 Konfigurieren des Geräts für die Netzwerkumgebung Die Konfiguration eines Netzwerks hängt von seinem Verwendungszweck ab. Das Gerät ist auf Kompatibilität mit möglichst vielen Netzwerkkonfigurationen ausgelegt und mit einer Vielzahl von Technologien ausgestattet. Konfigurieren Sie das Gerät in Absprache mit Ihrem Netzwerkadministrator je nach Netzwerkkonfiguration.
0W5F-087 Konfigurieren von Etherneteinstellungen Ethernet ist ein Standard für die Übertragung von Daten in einem lokalen Netzwerk (LAN). Sie können den Kommunikationsmodus (Halb- oder Vollduplex) bzw. den Ethernettyp (10BASE-T/100BASE-TX) einstellen. Üblicherweise können Sie das Gerät ohne Änderungen an den Standardwerten ( Einstellungen Ethernettreiber) verwenden, Sie können die Einstellungen bei Bedarf aber auch an die Netzwerkumgebung anpassen.
Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
0W5F-088 Ändern der maximalen Übertragungseinheit In den meisten Ethernetnetzwerken können Pakete mit einer Größe von maximal 1.500 Byte gesendet werden. Ein Paket ist hierbei eine Dateneinheit, in die die Originaldaten vor dem Senden unterteilt werden. Die maximale Übertragungseinheit (MTU, Maximum Transmission Unit) kann je nach Netzwerk variieren. Ändern Sie die Einstellung am Gerät nach Bedarf. Weitere Informationen erhalten Sie bei Ihrem Netzwerkadministrator.
0W5F-089 Einstellen einer Wartezeit für die Netzwerkverbindung In einem Netzwerk, in dem dank mehrerer Switching-Hubs oder Bridges redundante Verbindungen genutzt werden können, wird ein Mechanismus benötigt, der Übertragungsschleifen beim Übermitteln von Paketen verhindert. Eine wirksame Lösung besteht darin, die Rolle jedes Switchports zu definieren.
0W5F-08A Konfigurieren von DNS DNS (Domain Name System) bietet einen Dienst für die Namensauflösung zur Zuordnung von Host- oder Domänennamen zu IPAdressen. Konfigurieren Sie die DNS-, mDNS- oder DHCP-Einstellungen nach Bedarf. Beachten Sie, dass sich das Vorgehen beim Konfigurieren von DNS bei IPv4 und IPv6 unterscheidet. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Klicken Sie auf [Einstellungen/Registrierung].
[DNS-Einstellungen] [Adresse primärer DNS-Server] Geben Sie die IP-Adresse eines DNS-Servers ein. [Adresse sekundärer DNS-Server] Geben Sie die IP-Adresse eines sekundären DNS-Servers ein, sofern vorhanden. [Hostname] Geben Sie bis zu 47 alphanumerische Zeichen für den Hostnamen des Geräts ein, der beim DNS-Server registriert werden soll. [Domänenname] Geben Sie bis zu 47 alphanumerische Zeichen für die Domäne ein, zu der das Gerät gehört, wie beispielsweise "beispiel.de".
Konfigurieren von DNS bei IPv6 1 Klicken Sie in [Einstellungen IPv6] auf [Bearbeiten]. 2 Konfigurieren Sie die IPv6-DNS-Einstellungen. Das Kontrollkästchen [IPv6 verwenden] muss aktiviert sein, damit Sie die Einstellungen konfigurieren können. Einstellen von IPv6-Adressen [DNS-Einstellungen] [Adresse primärer DNS-Server] Geben Sie die IP-Adresse eines DNS-Servers ein. Adressen, die mit "ff" anfangen (oder Multicast-Adressen), können Sie nicht eingeben.
[Einstellungen mDNS] [mDNS verwenden] Das von Bonjour implementierte mDNS (Multicast-DNS) ist ein Protokoll zur Zuordnung von Hostnamen zu IP-Adressen ohne DNS. Aktivieren Sie das Kontrollkästchen, wenn Sie mDNS aktivieren möchten. [Denselben mDNS-Namen wie IPv4 verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie denselben mDNS-Namen wie bei IPv4 verwenden möchten.
0W5F-08C Konfigurieren von SMB SMB (Server Message Block) ist ein Protokoll für die Freigabe von Ressourcen wie Dateien und Druckern für mehr als ein Gerät in einem Netzwerk. Das Gerät verwendet SMB zum Speichern gescannter Dokumente in einem gemeinsamen Ordner. Je nach Netzwerk müssen Sie eventuell den NetBIOS- und den WorkgroupNamen einstellen.
5 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK]. [Name NetBIOS] Geben Sie bis zu 15 alphanumerische Zeichen für den NetBIOS-Namen des Geräts ein. [Name Arbeitsgruppe] Geben Sie bis zu 15 alphanumerische Zeichen für den Namen der Workgroup ein, zu der das Gerät gehört. NetBIOS- oder Workgroup-Namen, die mit einem Stern (* ) anfangen, können bei einem WINS-Server nicht registriert werden. 6 Starten Sie das Gerät neu.
0W5F-08E Konfigurieren von WINS WINS (Windows Internet Name Service) ermöglicht als Dienst für die Namensauflösung die Zuordnung von NetBIOS-Namen (Computeroder Druckername in einem SMB-Netzwerk) zu IP-Adressen. Wenn Sie WINS aktivieren möchten, müssen Sie den WINS-Server angeben. Damit Sie WINS-Servereinstellungen angeben können, müssen der NetBIOS- und der Workgroup-Name eingestellt werden. Konfigurieren von SMB Diese Funktion steht in IPv6-Netzwerken nicht zur Verfügung.
[WINS-Auflösung] Aktivieren Sie das Kontrollkästchen, um WINS für die Namensauflösung zu verwenden. Wenn Sie WINS nicht verwenden, deaktivieren Sie das Kontrollkästchen. [WINS-Serveradresse] Geben Sie die IP-Adresse des WINS-Servers ein. Wenn die IP-Adresse des WINS-Servers von einem DHCP-Server abgerufen wird, hat die abgerufene IP-Adresse Vorrang vor der in das Textfeld [WINS-Serveradresse] eingegebenen IP-Adresse. 6 Starten Sie das Gerät neu.
0W5F-08F Speichern von LDAP-Servern Wenn im Netzwerk ein LDAP-Server implementiert ist, können Sie auf dem Server nach Faxnummern und EMail-Adressen suchen und diese als Empfänger angeben oder im Adressbuch speichern. Beachten Sie zudem, dass Sie bei aktivierter Authentisierungseinstellung der Sendefunktion ( LDAP-Serverauthentisierung ) den für die Authentisierung verwendeten Server speichern müssen. Sie können jeweils maximal fünf LDAPServer für die Suche und die Authentisierung im Gerät speichern.
So bearbeiten Sie gespeicherte Serverinformationen Klicken Sie auf einen Textlink unter [Servername], um den Bearbeitungsbildschirm anzuzeigen. So löschen Sie gespeicherte Serverinformationen Klicken Sie rechts neben dem Namen des zu löschenden Servers auf [Löschen] 5 klicken Sie auf [OK]. Speichern Sie den LDAP-Server. Speichern Sie den für die Suche zu verwendenden Server Speichern Sie den Server für die Suche nach Fax-, E-Mail-Empfängern usw.
[Portnummer] Geben Sie die für die Kommunikation mit dem LDAP-Server verwendete Portnummer ein. [Timeout Suche] Legen Sie fest, wie lange das Gerät sucht. Geben Sie einen Wert zwischen 30 und 300 Sekunden ein. [Login-Informationen] Wählen Sie [Nicht verwenden], [Verwenden] oder [Verwenden (Sicherheitsauth.)], je nach dem vom LDAP-Server implementierten Authentisierungstyp. Wenn Sie [Verwenden] oder [Verwenden (Sicherheitsauth.)] auswählen, müssen Sie den Anwendernamen und das Passwort angeben.
[Serveradresse] Geben Sie die IP-Adresse des LDAP-Servers ein, oder geben Sie bis zu 47 alphanumerische Zeichen für den Hostnamen des Servers ein (Beispiel: ldap.beispiel.de). [Serveradresse] und DNS Damit bei der Suche nach Empfängern keine Fehler auftreten, achten Sie auf Folgendes: Vergewissern Sie sich, dass im Netzwerk ein DNS-Server zur Verfügung steht, wenn Sie in [Serveradresse] den Hostnamen eingeben.
6 Klicken Sie auf [OK].
0W5F-08H Konfigurieren von SNTP SNTP (Simple Network Time Protocol) ermöglicht die Einstellung der Systemuhr über einen Zeitserver im Netzwerk. Das Protokoll wird üblicherweise zum Synchronisieren des Geräts mit einem Server verwendet, wenn beispielsweise das Gerät auf einen LDAP-Server mit aktivierter Sicherheitsauthentisierung zugreifen muss.
5 Aktivieren Sie das Kontrollkästchen [SNTP verwenden], und legen Sie die erforderlichen Einstellungen fest. [SNTP verwenden] Aktivieren Sie das Kontrollkästchen, um SNTP für die Synchronisation zu verwenden. Wenn Sie SNTP nicht verwenden, deaktivieren Sie das Kontrollkästchen. [NTP-Servername] Geben Sie die IP-Adresse des NTP- oder SNTP-Servers ein. Wenn im Netzwerk DNS zur Verfügung steht, können Sie stattdessen einen Hostnamen (oder FQDN) mit bis zu 255 alphanumerische Zeichen eingeben (Beispiel: ntp.
0W5F-08J Überwachen und Steuern des Geräts mit SNMP SNMP (Simple Network Management Protocol) ist ein Protokoll zum Überwachen und Steuern von Kommunikationsgeräten in einem Netzwerk über die MIB (Management Information Base). Das Gerät unterstützt SNMPv1 und das mit Sicherheitsmechanismen ausgestattete SNMPv3. Sie können den Status des Geräts von einem Computer aus anzeigen, wenn Sie Dokumente drucken oder Remote UI verwenden. Sie können SNMPv1 oder SNMPv3 oder beide Versionen gleichzeitig aktivieren.
4 Klicken Sie auf [Bearbeiten]. 5 Legen Sie die SNMPv1-Einstellungen fest. Wenn Sie die SNMPv1-Einstellungen nicht ändern müssen, fahren Sie mit dem nächsten Schritt fort. [SNMPv1 verwenden] Aktivieren Sie das Kontrollkästchen, um SNMPv1 zu aktivieren. Sie können die übrigen SNMPv1-Einstellungen nur festlegen, wenn das Kontrollkästchen aktiviert ist. [Name Arbeitsgruppe 1 verwenden]/[Name Arbeitsgruppe 2 verwenden] Aktivieren Sie das Kontrollkästchen, um einen Community-Namen festzulegen.
[Zugewiesene Arbeitsgruppe verwenden] Die vordefinierte Community "Zugewiesene Arbeitsgruppe" ist ausschließlich für Administratoren vorgesehen, die Canon Software wie iW Management Console verwenden. Aktivieren Sie das Kontrollkästchen, um die zugewiesene Arbeitsgruppe zu verwenden. Wenn Sie die zugewiesene Arbeitsgruppe nicht verwenden, deaktivieren Sie das Kontrollkästchen. 6 Legen Sie die SNMPv3-Einstellungen fest.
aktivieren. Wenn Sie die Überwachung der Druckerverwaltungsinformationen deaktivieren wollen, deaktivieren Sie das Kontrollkästchen. 8 9 Klicken Sie auf [OK]. Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Deaktivieren von SNMPv1 und SNMPv3 Wenn Sie beide SNMP-Versionen deaktivieren, stehen einige der Funktionen des Geräts nicht mehr zur Verfügung, so auch das Abrufen von Geräteinformationen über den Druckertreiber.
0W5F-08K Konfigurieren von Einstellungen für Geräteverwaltungssoftware Sie können die Erfassung und die Verwaltung verschiedener Informationen über vernetzte Geräte erleichtern, indem Sie Geräteverwaltungssoftware wie iW Management Console * im Netzwerk implementieren. Informationen wie Geräteeinstellungen, Adressbücher und Fehlerlogs werden abgerufen und über den Servercomputer verteilt.
4 Legen Sie die SLP-Einstellungen fest. Festlegen der Multicast-Geräte-Discovery 1 Klicken Sie in [Einstellungen Multicast Discovery] auf [Bearbeiten]. 2 Aktivieren Sie das Kontrollkästchen [Antwort an Discovery], und legen Sie die erforderlichen Einstellungen fest. [Antwort an Discovery] Aktivieren Sie das Kontrollkästchen, wenn das Gerät auf Multicast-Discovery-Pakete von Geräteverwaltungssoftware reagieren soll und die Überwachung mit Geräteverwaltungssoftware aktiviert werden soll.
1 Klicken Sie in [Benachrichtigungseinstellungen Schlafmodus] auf [Bearbeiten]. 2 Aktivieren Sie das Kontrollkästchen [Benachrichtigen], und legen Sie die erforderlichen Einstellungen fest. [Benachrichtigen] Aktivieren Sie das Kontrollkästchen, wenn eine Geräteverwaltungssoftware über den Stromversorgungsstatus des Geräts benachrichtigt werden soll.
3 Klicken Sie auf [Netzwerkeinstellungen] 4 Klicken Sie auf [Bearbeiten]. 5 Wählen Sie [Einstellungen für Verwaltung Geräte-Einstellungen verwenden] [Einstellungen für Verwaltung Geräte-Einstellungen]. LINKS Wechseln in den Schlafmodus 㻠㻝㻡㻌㻛㻌㻣㻠㻠 [OK].
0W5F-08L Sicherheit Mit informationstechnischen Geräten wie Computern und Druckern werden überall vertrauliche Informationen verarbeitet, und alle diese Geräte können das Ziel von böswilligen Angriffen werden. Angreifer können direkt unbefugten Zugriff auf die Geräte erlangen oder indirekt Nachlässigkeit oder eine unsachgemäße Handhabung ausnutzen. In jedem Fall kann die Preisgabe vertraulicher Informationen zu unerwarteten Verlusten führen.
0W5F-08R Schützen des Geräts vor unbefugtem Zugriff Sie können verhindern, dass unbefugte Dritte auf das Gerät zugreifen und es verwenden. Dazu stehen verschiedene Sicherheitsmaßnahmen zur Verfügung, wie das Verwalten der Zugriffsrechte der Anwender, die Verwendung von Firewalls und das Ändern von Portnummern.
0W5F-08S Verhindern von unbefugtem Zugriff In diesem Abschnitt werden die Sicherheitsmaßnahmen beschrieben, die ergriffen werden sollten, um einen unbefugten Zugriff über das externe Netzwerk zu verhindern. Dieser Abschnitt sollte von allen Benutzern und Administratoren vor der Verwendung dieses Geräts und anderer Drucker und Multifunktionsgeräte gelesen werden, die mit dem Netzwerk verbunden sind.
einschränken. Mit der in einem Canon Drucker oder Canon Multifunktionsgerät installierten Funktion können Sie die IP-Adressfilterung Angeben von IP-Adressen für Firewallregeln. einrichten.
0W5F-08U Festlegen von Zugriffsrechten Schützen Sie das Gerät vor unbefugtem Zugriff, indem Sie nur Benutzern mit entsprechenden Zugriffsrechten die Verwendung gestatten. Zugriffsrechte werden für Systemadministratoren, allgemeine Benutzer und für Remote UI einzeln erteilt. Wenn Zugriffsrechte erteilt wurden, muss der Benutzer zum Drucken oder zum Ändern von Einstellungen eine ID und eine PIN eingeben.
0W5F-08W Einstellen der Systemmanager-ID Diese PIN gilt für die Verwendung von Remote UI. Nur Benutzer, denen die PIN bekannt ist, können auf Remote UI zugreifen. Sie können auch eine PIN für die Systemmanager-ID festlegen. Wenn diese ID aktiviert ist, müssen Sie für den Zugriff auf und die Systemmanager-ID und die PIN korrekt eingeben.
Konfigurieren von Einstellungen über Remote UI Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Klicken Sie auf [Einstellungen/Registrierung] [Systemverwaltung] [Bearbeiten], und legen Sie die nötigen Einstellungen auf dem daraufhin angezeigten Bildschirm fest. Über Remote UI können Sie zusätzlich zu den über das Bedienfeld speicherbaren Einstellungen viele Informationen speichern, so auch Kontaktinformationen, Kommentare der Administratoren und den Aufstellort des Geräts.
0W5F-08X Einstellen der Verwaltung per Abteilungs-IDs Sie können den Zugriff auf das Gerät mithilfe verschiedener IDs für verschiedene Anwender oder Gruppen steuern. Wenn die Verwaltung per Abteilungs-ID aktiviert ist und ein Anwender versucht, das Gerät zu benutzen, wird ein Anmeldebildschirm angezeigt, und der Anwender muss eine korrekte Abteilungs-ID sowie die passende PIN eingeben, bevor er das Gerät verwenden kann.
1 2 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK]. [Abteilungs-ID] Geben Sie eine maximal 7-stellige Zahl für die Abteilungs-ID ein. [PIN einstellen] Aktivieren Sie das Kontrollkästchen, und geben Sie eine maximal 7-stellige Zahl in die Textfelder [PIN] und [Bestätigen] ein, wenn Sie eine PIN festlegen wollen. [Funktionen beschränken] Aktivieren Sie das Kontrollkästchen für die Funktion, die Sie für die Abteilungs-ID deaktivieren wollen.
Nachdem Sie die benötigten Abteilungs-IDs gespeichert haben, aktivieren Sie die Verwaltung per Abteilungs-IDs. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung]. 3 Klicken Sie auf [Verwaltung Abteilungs-ID] 4 Aktivieren Sie das Kontrollkästchen [Verwaltung Abteilungs-ID], und klicken Sie auf [OK]. [Bearbeiten].
Wenn die Verwaltung per Abteilungs-IDs aktiviert ist und Sie versuchen, das Gerät zu benutzen, wird der folgende Anmeldebildschirm angezeigt. Einstellen der Verwaltung per Abteilungs-IDs für das Drucken oder Faxen von einem Computer aus Wenn Sie die Verwaltung per Abteilungs-IDs für das Drucken oder Faxen von einem Computer aus aktivieren wollen, müssen Sie mit den bereits auf dem Computer installierten Treibern bestimmte Einstellungen festlegen. Geben Sie gegebenenfalls die Abteilungs-ID und PIN an.
2 Konfigurieren Sie gegebenenfalls die Einstellungen, und klicken Sie auf [OK]. [PIN-Festlegung zulassen] Aktivieren Sie das Kontrollkästchen, um die PIN-Einstellung zu aktivieren. [Abteilungs-ID] Geben Sie eine maximal 7-stellige Zahl für die Abteilungs-ID ein. [PIN] Geben Sie eine maximal 7-stellige Zahl für die PIN ein, wenn für die Abteilungs-ID eine PIN festgelegt ist. [Überprüfen] Klicken Sie hier, um zu überprüfen, ob die richtige ID und PIN eingegeben wurden.
3 Klicken Sie auf [Verwaltung Abteilungs-ID] 4 Deaktivieren Sie die Kontrollkästchen nach Bedarf, und klicken Sie auf [OK]. [Bearbeiten]. [Druckaufträge mit unbekannten IDs zulassen] Um von einem Computer zu drucken oder Faxdokumente zu senden, wenn die Verwaltung per Abteilungs-ID aktiviert ist, müssen Sie die richtige ID und PIN eingeben ( Einstellen der Verwaltung per Abteilungs-IDs für das Drucken oder Faxen von einem Computer aus).
0W5F-08Y Festlegen einer PIN für Remote UI Sie können eine PIN für den Zugriff auf Remote UI festlegen. Alle Benutzer verwenden eine gemeinsame PIN. Wenn die Verwaltung per Abteilungs-IDs aktiviert ist, ist die Einstellung hier nicht erforderlich. per Abteilungs-IDs 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung]. 3 Klicken Sie auf [Sicherheitseinstellungen] 4 Klicken Sie auf [Bearbeiten].
[PIN für den Zugriff auf die Remote UI verwenden] Wenn Sie dieses Kontrollkästchen aktivieren, müssen Sie eine PIN für den Zugriff auf Remote UI eingeben. [PIN einstellen/ändern] Aktivieren Sie das Kontrollkästchen, und geben Sie eine maximal 7-stellige Zahl in die Textfelder [PIN] und [Bestätigen] ein, wenn Sie eine PIN festlegen wollen. 6 Klicken Sie auf [OK]. Wenn die PIN vergessen wurde Legen Sie über das Bedienfeld im Einstellungsmenü eine neue Zugriffs-PIN für Remote UI fest.
0W5F-090 LDAP-Serverauthentisierung Wenn auf Ihrem System ein LDAP-Server installiert ist, können Sie sicherstellen, dass die LDAP-Serverauthentisierung bei Verwendung der Sendefunktion durchgeführt wird. Auf diese Weise können Sie eine unbefugte Verwendung durch Dritte und eine Offenlegung von Informationen verhindern.
[Authentisierungsanzeige bei Start des Sendevorgangs anzeigen] Aktivieren Sie dieses Kontrollkästchen, um den Anmeldebildschirm für das Autorisierte Senden anzuzeigen, wenn die Fax- oder Scanfunktion verwendet wird (LDAP-Serverauthentisierung). [Bestätigungsanzeige bei Logout anzeigen] Aktivieren Sie dieses Kontrollkästchen, um einen Bildschirm anzuzeigen, auf dem Sie sich selektiv abmelden können, wenn Sie sowohl bei Autorisiertes Senden als auch bei Verwaltung per Abteilungs-IDs angemeldet sind.
Aktivieren Sie dieses Kontrollkästchen, wenn die E-Mail-Adresse eines autorisierten Benutzers als Absender festgelegt wird. Die EMail-Adressen autorisierter Benutzer müssen auf dem LDAP-Server gespeichert werden. Wenn Sie dieses Kontrollkästchen deaktivieren, wird die in [Einstellungen E-Mail/I-Fax] festgelegte E-Mail-Adresse als Absender festgelegt. 7 Konfigurieren Sie die Dateiübertragungseinstellungen (für das Speichern in gemeinsamen Ordnern oder auf einem FTP-Server).
verwenden, die auch bei Start des Sendevorgangs verwendet werden] wurden. Bei Aktivierung des Kontrollkästchens [Authentisierungsanzeige bei Senden anzeigen] wird der Authentisierungsbildschirm beim Senden der Daten angezeigt, wobei diese Angaben für Anwendername und Passwort bereits eingegeben sind. [Authentisierungsanzeige ohne Authentisierungsinformationen anzeigen] Zeigt den Authentisierungsbildschirm mit leeren Feldern für Anwendername und Passwort an.
0W5F-091 Einschränken der Kommunikation mithilfe von Firewalls Ohne ausreichende Sicherheitsmaßnahmen können unbefugte Dritte auf Computer und andere Kommunikationsgeräte in einem Netzwerk zugreifen. Sie können unbefugte Zugriffe unterbinden, indem Sie Einstellungen für den Paketfilter festlegen, sodass die Kommunikation nur noch mit den Geräten möglich ist, die die angegebenen IP- oder MAC-Adressen aufweisen.
0W5F-092 Angeben von IP-Adressen für Firewallregeln Sie können die Kommunikation nur mit Geräten mit bestimmten IP-Adressen zulassen oder Geräte mit bestimmten IP-Adressen blockieren. Dazu können Sie eine einzelne IP-Adresse oder einen Bereich von IP-Adressen angeben. Bis zu 16 IP-Adressen (oder Bereiche von IP-Adressen) können für IPv4 und IPv6 angegeben werden. Die in diesem Abschnitt beschriebenen Paketfilter steuern die Kommunikation über TCP, UDP und ICMP.
Legen Sie fest, ob das Senden von Daten vom Gerät an einen Computer über die Angabe von IPv4-Adressen beschränkt werden soll. [IPv4-Adresse: Eingangsfilter] Legen Sie fest, ob das Empfangen von Daten von einem Computer am Gerät über die Angabe von IPv4-Adressen beschränkt werden soll. [IPv6-Adresse: Ausgangsfilter] Legen Sie fest, ob das Senden von Daten vom Gerät an einen Computer über die Angabe von IPv6-Adressen beschränkt werden soll.
Verwenden Sie Doppelpunkte als Trennzeichen für die alphanumerischen Zeichen. Angeben eines Adressbereichs Fügen Sie zwischen den Adressen einen Bindestrich ein. Angeben eines Adressbereichs mit einem Präfix Geben Sie die Adresse gefolgt von einem Schrägstrich und einer Zahl zur Angabe der Präfixlänge ein. fe80::10 192.168.0.10192.168.0.20 192.168.0.
0W5F-093 Angeben von MAC-Adressen für Firewallregeln Sie können die Kommunikation nur mit Geräten mit bestimmten MAC-Adressen zulassen oder Geräte mit bestimmten MAC-Adressen blockieren. Dazu können Sie bis zu 32 MAC-Adressen angeben. Diese Funktion steht nicht zur Verfügung, wenn das Gerät mit einem Wireless LAN verbunden ist. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung].
Legen Sie fest, ob das Empfangen von einem Computer am Gerät über die Angabe von MAC-Adressen beschränkt werden soll. 5 Legen Sie die Einstellungen für die Paketfilterung fest. Wählen Sie die Vorbedingung (Standardrichtlinie), um die Kommunikation von anderen Geräten mit diesem Gerät zuzulassen oder abzulehnen, und legen Sie dann MAC-Adressen für die Ausnahmen fest.
Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds Sie können die MAC-Adressfilterung auch über auf dem Bildschirm aktivieren oder deaktivieren.
0W5F-094 Ändern von Portnummern Ports fungieren als Endpunkte für die Kommunikation mit anderen Geräten. Üblicherweise werden für die wichtigsten Protokolle standardisierte Portnummern verwendet, aber Geräte, die diese Portnummern verwenden, sind anfällig für Angriffe, weil diese Portnummern allgemein bekannt sind. Zum Verbessern der Sicherheit kann Ihr Netzwerkadministrator die Portnummern ändern.
0W5F-095 Einstellen eines Proxyservers Ein Proxyserver (bzw. HTTP-Proxyserver) ist ein Computer oder eine Software, die die HTTP-Kommunikation für andere Geräte abwickelt, insbesondere bei der Kommunikation mit Ressourcen außerhalb des Netzwerks, also beispielsweise beim Browsen auf Websites. Die Clientgeräte stellen die Verbindung zum externen Netzwerk über den Proxyserver her und kommunizieren nicht direkt mit den externen Ressourcen.
[Proxy verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie den angegebenen Proxyserver bei der Kommunikation mit einem HTTP-Server verwenden wollen. [HTTP-Adresse Proxy-Server] Geben Sie die Adresse des Proxyservers ein. Geben Sie je nach Umgebung die IP-Adresse oder den Hostnamen an. [HTTP-Portnummer Proxy-Server] Ändern Sie nötigenfalls die Portnummer. Geben Sie eine Portnummer zwischen 1 und 65535 ein. [Proxy in gleicher Domäne verw.
0W5F-096 Einschränken der Gerätefunktionen Einige der Funktionen des Geräts werden unter Umständen kaum verwendet oder bieten sich für eine missbräuchliche Verwendung an. Die Funktionen des Geräts können daher aus Sicherheitsgründen teilweise oder komplett deaktiviert werden.
0W5F-097 Einschränken des Zugriffs auf das Adressbuch und die Sendefunktionen Bestimmte Formen der ungewollten Preisgabe von Informationen lassen sich verhindern, wenn Sie die verfügbaren Fax- und E-MailEmpfänger auf die im Adressbuch oder auf LDAP-Servern gespeicherten Empfänger einschränken oder für das Adressbuch eine PIN festlegen, sodass unbefugte Anwender Adressbucheinträge nicht hinzufügen oder bearbeiten können.
0W5F-098 Festlegen einer PIN für das Adressbuch Das Adressbuch können Sie so einstellen, dass Anwender zum Hinzufügen neuer oder zum Bearbeiten vorhandener Einträge eine PIN eingeben müssen. Durch das Festlegen einer PIN für das Adressbuch können Sie das Risiko verringern, dass Dokumente an unbeabsichtigte Empfänger gesendet werden, da Änderungen am Adressbuch dann nur von Anwendern vorgenommen werden können, die die PIN kennen. 1 2 Tippen Sie auf dem Bildschirm auf .
0W5F-099 Einschränken der verfügbaren Empfänger Indem Sie beim Senden von Dokumenten die auswählbaren Faxnummern auf Einträge einschränken, die bereits im Adressbuch gespeichert sind, bereits verwendet wurden oder auf den LDAP-Servern gesucht werden können, verringern Sie das Risiko, dass falsche Empfänger angegeben und Informationen so ungewollt preisgegeben werden.
0W5F-09A Unterbinden von PC-Faxen Sie können verhindern, dass Anwender die PC-Faxfunktion für das Senden von Faxen vom Computer aus nutzen. 1 2 3 Tippen Sie auf dem Bildschirm auf . Tippen Sie auf . Wählen Sie . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und die richtige PIN ein, und drücken Sie . Anmelden am Gerät dann 4 Tippen Sie auf .
0W5F-09C Deaktivieren der Verwendung von zuvor verwendeten Empfängern Unterbindet die Angabe von Empfängern aus den Übertragungsdatensätzen. Bei dieser Einschränkung können keine Empfänger aus den Übertragungsdatensätzen für das "Senden von Faxen", das "Scannen und Senden als E-Mail" und das "Scannen und Speichern in einem gemeinsamen Ordner oder auf einem FTP-Server" ausgewählt werden. 1 2 Tippen Sie auf dem Bildschirm auf . Tippen Sie auf .
0W5F-09E Überprüfen von Empfängern vor dem Senden von Dokumenten Indem Sie die Faxnummer zweimal eingeben, können Sie das Risiko reduzieren, dass Dokumente aufgrund von Eingabefehlern an die falsche Nummer gefaxt werden. Verwenden Sie die in diesem Abschnitt beschriebenen Funktionen, wenn Sie vertrauliche Dokumente senden möchten.
Der Bildschirm mit den Details zu der eingegebenen Nummer für die kodierte Wahl wird nicht angezeigt. Der Bildschirm mit den Details zu der eingegebenen Nummer für die kodierte Wahl wird angezeigt.
0W5F-09F Unterbinden von Rundsendungen Bei Rundsendungen werden Faxe nacheinander an mehrere Empfänger gesendet. Diese Funktion kann bei Bedarf deaktiviert werden. 1 2 3 Tippen Sie auf dem Bildschirm auf . Tippen Sie auf . Tippen Sie auf . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und die richtige PIN ein, und drücken Sie .
0W5F-09H Einschränken von USB-Funktionen Per USB lassen sich Peripheriegeräte problemlos anschließen und Daten einfach speichern oder verschieben, aber ohne angemessene Verwaltung können über USB auch ungewollt Informationen preisgegeben werden. Seien Sie im Umgang mit USB-Speichergeräten besonders vorsichtig. Dieser Abschnitt beschreibt, wie die Verbindung über den USB-Anschluss des Geräts beschränkt wird und wie die Verwendung von USB-Speichergeräten verhindert wird.
3 4 Tippen Sie auf . Tippen Sie auf . Diese Option verhindert, dass Daten auf einem USB-Speichergerät gespeichert werden. Gescannte Daten können nicht auf dem USB-Speichergerät gespeichert werden. Erlaubt das Speichern von Daten auf einem USB-Speichergerät. 5 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
0W5F-09J Deaktivieren der HTTP-Kommunikation HTTP wird für die Kommunikation über das Netzwerk verwendet, also beispielsweise beim Zugriff auf das Gerät über Remote UI. Wenn Sie eine USB-Verbindung verwenden oder HTTP aus einem anderen Grund nicht verwenden, können Sie HTTP deaktivieren und so böswillige Angriffe Dritter über den nicht genutzten HTTP-Port blockieren.
0W5F-09K Deaktivieren von Remote UI Remote UI ist nützlich, wenn Sie die Geräteeinstellungen über einen Webbrowser auf einem Computer festlegen können. Das Gerät muss mit einem Computer im Netzwerk verbunden sein, damit Sie Remote UI verwenden können. Wenn das Gerät über USB mit einem Computer verbunden ist oder wenn Sie Remote UI nicht benötigen, können Sie Remote UI deaktivieren und so das Risiko verringern, dass ein böswilliger Dritter das Gerät über das Netzwerk fernsteuert.
0W5F-09L Implementieren robuster Sicherheitsfunktionen Böswillige Angriffe können bei autorisierten Anwendern zu unerwarteten Verlusten führen, wenn Daten bei der Übermittlung über ein Netzwerk per Sniffing oder Spoofing abgefangen und manipuliert werden. Das Gerät unterstützt die folgenden Funktionen, mit denen Sie für mehr Sicherheit sorgen und wertvolle Informationen vor solchen Angriffen schützen können.
0W5F-09R Aktivieren der Kommunikation mit SSL-Verschlüsselung für Remote UI Mit SSL (Secure Sockets Layer) können Sie die Kommunikation zwischen dem Gerät und einem Webbrowser auf dem Computer verschlüsseln. SSL ist ein Protokoll für die Verschlüsselung der über ein Netzwerk gesendeten oder empfangenen Daten. SSL muss aktiviert sein, wenn Sie über Remote UI die Einstellungen für IPSec (Methode Pre-Shared Key), die IEEE 802.1X-Authentisierung (TTLS/PEAP) oder SNMPv3 festlegen.
5 Anzeigen von Details zu Zertifikaten Sie können die Details zu dem Zertifikat anzeigen oder das Zertifikat verifizieren, indem Sie unter [Schlüsselname] auf den entsprechenden Textlink oder auf das Zertifikatsymbol klicken. Verifizieren von Schlüsselpaaren und digitalen Zertifikaten 6 Aktivieren Sie SSL für Remote UI. 1 Klicken Sie auf [Sicherheitseinstellungen] 2 Klicken Sie auf [Bearbeiten]. 3 Aktivieren Sie das Kontrollkästchen [SSL verwenden], und klicken Sie auf [OK].
7 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds Sie können die Kommunikation mit SSL-Verschlüsselung auch über auf dem Bildschirm aktivieren oder SSL verwenden deaktivieren. Starten von Remote UI mit SSL Wenn SSL aktiviert ist und Sie versuchen, Remote UI zu starten, wird möglicherweise eine Sicherheitswarnung zum Sicherheitszertifikat angezeigt.
0W5F-09S Konfigurieren von IPSec-Einstellungen Internet Protocol Security (IPSec oder IPsec) ist eine Protokollsuite für die Verschlüsselung der über Netzwerke und Internet-Netzwerke übermittelten Daten. Während SSL nur Daten verschlüsselt, die in einer bestimmten Anwendung wie einem Webbrowser oder einer EMail-Anwendung verwendet werden, verschlüsselt IPSec ganze IP-Pakete oder die Nutzdaten von IP-Paketen und stellt somit ein flexibleres Sicherheitssystem als SSL bereit.
Konfigurieren von IPSec-Einstellungen Bevor Sie IPSec für die verschlüsselte Kommunikation verwenden können, müssen Sie Sicherheitsrichtlinien speichern. Eine Sicherheitsrichtlinie besteht aus Gruppen von Einstellungen (siehe die Erläuterungen unten). Bis zu 10 Richtlinien können gespeichert werden. Geben Sie nach dem Speichern von Richtlinien an, in welcher Reihenfolge diese angewendet werden sollen.
4 Klicken Sie auf [Bearbeiten]. 5 Aktivieren Sie das Kontrollkästchen [IPSec verwenden], und klicken Sie auf [OK]. Wenn das Gerät nur Pakete empfangen soll, die einer der in den Schritten unten festgelegten Sicherheitsrichtlinien entsprechen, deaktivieren Sie das Kontrollkästchen [Empf. von Pak. ohne Richtlinie]. 6 Klicken Sie auf [Neue Richtlinie speichern]. 7 Legen Sie die Einstellungen für die Richtlinie fest.
[Lokale Adresse] Klicken Sie auf das Optionsfeld für den IP-Adresstyp dieses Geräts, auf den die Richtlinie angewendet werden soll. [Alle IPAdressen] Wählen Sie diese Einstellung, wenn IPSec für alle IP-Pakete verwendet werden soll. [IPv4-Adresse] Wählen Sie diese Einstellung, wenn IPSec für alle an die und von der IPv4-Adresse des Geräts gesendeten IP-Pakete verwendet werden soll.
Subnetmaske mit Punkten zur Trennung der Zahlen ein (Beispiel: "255.255.255.240"). [Präfixlänge] Bei der manuellen Angabe eines IPv6-Adressbereichs können Sie den Bereich auch mithilfe von Präfixen angeben. Geben Sie einen Bereich von 0 bis 128 als Präfixlänge ein. [Lokaler Port]/[Remote-Port] Wenn Sie für jedes Protokoll wie HTTP oder SMTP eine eigene Richtlinie erstellen wollen, geben Sie die Portnummer für das jeweilige Protokoll ein, um festzulegen, ob IPSec verwendet wird.
3 Legen Sie die Einstellungen für [Gültig für] und [Authentisierung]/[Verschlüss.]/[DH-Gruppe] fest. Verwenden eines Schlüsselpaars und vorinstallierter Zertifizierungsstellenzertifikate für die Authentisierung 1 Klicken Sie für [Authentisierungsmethode] auf das Optionsfeld [Methode digitale Signatur], und klicken Sie dann auf [Schlüssel und Zertifikat]. 2 Klicken Sie rechts neben einem zu verwendenden Schlüsselpaar auf [Standardschlüssel registrieren].
deaktivieren möchten. [Anschlussmodus] Der IPSec-Verbindungsmodus wird angezeigt. Das Gerät unterstützt den Transportmodus, bei dem die Nutzdaten von IP-Paketen verschlüsselt werden. Der Tunnelmodus, bei dem ganze IP-Pakete (Header und Nutzdaten) verschlüsselt werden, steht nicht zur Verfügung. 11 Klicken Sie auf [OK]. Wenn Sie eine weitere Sicherheitsrichtlinie speichern müssen, fangen Sie wieder mit Schritt 6 an.
0W5F-09U Konfigurieren der IEEE 802.1X-Authentisierung Das Gerät kann als Client mit einem 802.1X-Netzwerk verbunden werden. Ein 802.1X-Netzwerk besteht normalerweise aus einem RADIUS-Server (Authentisierungsserver), einem LAN-Switch (Authenticator) und Clientgeräten mit Authentisierungssoftware (Supplicants). Wenn ein Gerät versucht, eine Verbindung zu einem 802.
4 5 Klicken Sie auf [Bearbeiten]. Aktivieren Sie das Kontrollkästchen [IEEE 802.1X verwenden], geben Sie den Login-Namen in das Textfeld [Login-Name] ein, und legen Sie die erforderlichen Einstellungen fest. [IEEE 802.1X verwenden] Aktivieren Sie das Kontrollkästchen, um die IEEE 802.1X-Authentisierung zu aktivieren. [Login-Name] Geben Sie bis zu 24 alphanumerische Zeichen für den Namen (EAP-Identität) ein, der zum Identifizieren des Anwenders dient.
Anzeigen von Details zu Schlüsselpaaren oder Zertifikaten Sie können die Details zu dem Zertifikat anzeigen oder das Zertifikat verifizieren, indem Sie unter [Schlüsselname] auf den entsprechenden Textlink oder auf das Zertifikatsymbol klicken. Verifizieren von Schlüsselpaaren und digitalen Zertifikaten Einstellen von TTLS/PEAP 1 Aktivieren Sie das Kontrollkästchen [TTLS verwenden] oder [PEAP verwenden]. Internes Protokoll für TTLS Sie können MSCHAPv2 oder PAP wählen.
[Anwendername] Geben Sie bis zu 24 alphanumerische Zeichen für den Anwendernamen ein. [Passwort ändern] Zum Festlegen oder Ändern des Passworts aktivieren Sie das Kontrollkästchen, und geben Sie bis zu 24 alphanumerische Zeichen für das neue Passwort in die Textfelder [Passwort] und [Bestätigen] ein. 6 Klicken Sie auf [OK]. 7 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Verwenden des Bedienfelds Sie können die IEEE 802.
0W5F-09W Konfigurieren von Einstellungen für Schlüsselpaare und digitale Zertifikate Um die Kommunikation mit einem Remotegerät zu verschlüsseln, muss zuvor ein Verschlüsselungsschlüssel über ein ungesichertes Netzwerk gesendet und empfangen werden. Dieses Problem wird mit dem Public-Key-Verschlüsselungsverfahren behoben.
0W5F-09X Generieren von Schlüsselpaaren Sie können mit dem Gerät ein Schlüsselpaar generieren, wenn dies für die verschlüsselte Kommunikation über SSL (Secure Sockets Layer) erforderlich ist. Sie können SSL verwenden, wenn Sie über Remote UI auf das Gerät zugreifen. Bis zu vier Schlüsselpaare können für das Gerät generiert werden. Selbst signierte Zertifikate werden mit Schlüsselpaaren verwendet, die unter "Netzwerkkommunikation" generiert wurden.
Löschen von registrierten Schlüsselpaaren Klicken Sie rechts neben dem zu löschenden Schlüsselpaar auf [Löschen] klicken Sie auf [OK]. Ein Schlüsselpaar kann nicht gelöscht werden, wenn es gerade verwendet wird, wenn also beispielsweise "[SSL]" oder "[IEEE 802.1X]" unter [Verwendung Schlüssel] angezeigt wird. Deaktivieren Sie in diesem Fall die Funktion, oder ersetzen Sie das Schlüsselpaar, bevor Sie es löschen. 5 Wählen Sie [Netzwerkkommunikation], und klicken Sie auf [OK].
[Organisation]/[Organisationseinheit] Geben Sie bei Bedarf bis zu 24 alphanumerische Zeichen für den Namen des Unternehmens ein. [Allgemeiner Name] Geben Sie bis zu 48 alphanumerische Zeichen für den allgemeinen Namen des Zertifikats ein. Der allgemeine Name wird auch als "Common Name" oder "CN" bezeichnet. 7 Klicken Sie auf [OK]. Das Generieren von Schlüsseln für die Netzwerkkommunikation kann etwa 10 bis 15 Minuten dauern.
Klicken Sie rechts neben dem zu löschenden Schlüsselpaar auf [Löschen] klicken Sie auf [OK]. Ein Schlüsselpaar kann nicht gelöscht werden, wenn es gerade verwendet wird, wenn also beispielsweise "[SSL]" oder "[IEEE 802.1X]" unter [Verwendung Schlüssel] angezeigt wird. Deaktivieren Sie in diesem Fall die Funktion, oder ersetzen Sie das Schlüsselpaar, bevor Sie es löschen. 5 Wählen Sie [Schlüssel und Zertifikat-Signieranforderung (CSR)], und klicken Sie auf [OK].
8 Klicken Sie auf [In Datei speichern]. Ein Dialogfeld zum Speichern der Datei wird angezeigt. Wählen Sie aus, wo die Datei gespeichert werden soll, und klicken Sie auf [Speichern]. Die Datei der Schlüssel- und Zertifikatsregistrierungsanforderung (CSR) wird auf dem Computer gespeichert. 9 Hängen Sie die gespeicherte Datei an, und übergeben Sie die Anforderung an die Zertifizierungsstelle.
6 Klicken Sie auf [Durchsuchen], geben Sie die Datei für die Zertifikatsregistrierungsanforderung an, und klicken Sie auf [Registrieren].
0W5F-09Y Verwenden von Schlüsselpaaren und digitalen Zertifikaten, die von einer Zertifizierungsstelle ausgegeben wurden Schlüsselpaare und digitale Zertifikate für die Verwendung mit dem Gerät können Sie bei einer Zertifizierungsstelle erhalten. Sie können diese Dateien mit Remote UI speichern und im Gerät registrieren. Vergewissern Sie sich, dass Schlüsselpaare und digitale Zertifikate die Anforderungen des Geräts erfüllen ( Anforderungen für Schlüssel und Zertifikate).
Löschen von registrierten Schlüsselpaaren oder Zertifizierungsstellenzertifikaten Klicken Sie rechts neben dem zu löschenden Schlüsselpaar oder Zertifizierungsstellenzertifikat auf [Löschen] [OK]. Die vorinstallierten Zertifizierungsstellenzertifikate können Sie nicht löschen. klicken Sie auf Ein Schlüsselpaar kann nicht gelöscht werden, wenn es gerade verwendet wird, wenn also beispielsweise "[SSL]" oder "[IEEE 802.1X]" unter [Verwendung Schlüssel] angezeigt wird.
Geben Sie das Passwort des privaten Schlüsselsatzes für die zu registrierende Datei mit bis zu 24 alphanumerischen Zeichen ein. Registrieren von Zertifizierungsstellenzertifikaten Klicken Sie rechts neben dem zu registrierenden Zertifizierungsstellenzertifikat auf [Registrieren]. LINKS Generieren von Schlüsselpaaren Verifizieren von Schlüsselpaaren und digitalen Zertifikaten Aktivieren der Kommunikation mit SSL-Verschlüsselung für Remote UI Konfigurieren von IPSec-Einstellungen Konfigurieren der IEEE 802.
0W5F-0A0 Generieren eines Gerätesignaturschlüssels Sie können einen Gerätesignaturschlüssel und ein Zertifikat generieren, um zu zeigen, dass ein Dokument auf dem Gerät gescannt wurde. Das Zertifikat wird angehängt, wenn ein Original gescannt und in eine PDF-Datei konvertiert wird. Ein Gerätesignaturschlüssel wird nur einmal generiert und kann nicht gelöscht werden. Ein optionales Send PDF Security Feature Set ist erforderlich. Der Gerätesignaturschlüssel und das Zertifikat sind fünf Jahre lang gültig.
5 Aktivieren Sie das Kontrollkästchen [Gerätesignatur], und klicken Sie auf [OK]. Der Gerätesignaturschlüssel wird generiert. Erneuern des Gerätesignaturschlüssels 1 Klicken Sie rechts neben dem Gerätesignaturschlüssel auf [Aktualisieren]. 2 Klicken Sie auf [OK].
0W5F-0A1 Verifizieren von Schlüsselpaaren und digitalen Zertifikaten Nachdem Sie Schlüsselpaare und Zertifizierungsstellenzertifikate registriert haben, können Sie detaillierte Informationen dazu anzeigen oder ihre Gültigkeit und Signatur verifizieren. 1 2 3 4 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Klicken Sie auf [Einstellungen/Registrierung].
Das Ergebnis beim Verifizieren des Zertifikats wird wie unten abgebildet angezeigt.
0W5F-0A2 Verwenden von Remote UI Wenn Sie das Gerät über einen Webbrowser remote bedienen, können Sie die zu druckenden Dokumente oder den Status des Geräts überprüfen. Sie können auch einige Einstellungen vornehmen, wie die Registrierung des Adressbuchs. Das ist möglich, ohne dass Sie Ihren Schreibtisch verlassen, was die Systemverwaltung einfacher macht.
0W5F-0A3 Starten von Remote UI Für die Remotebedienung müssen Sie die IP-Adresse des Geräts in einen Webbrowser eingeben und Remote UI starten. Überprüfen Sie im Vorfeld die beim Gerät eingestellte IP-Adresse ( Anzeigen von Netzwerkeinstellungen). Wenn Sie Fragen haben, wenden Sie sich an Ihren Netzwerkadministrator. 1 2 Starten Sie den Webbrowser. Geben Sie in das Adressfeld "http://(IP-Adresse des Geräts)/" ein, und drücken Sie die Taste [EINGABE].
4 Klicken Sie auf [Login]. Die Portalseite (Hauptseite) wird angezeigt.
0W5F-0A4 Remote UI-Bildschirme In diesem Abschnitt werden die Hauptbildschirme von Remote UI beschrieben. Portalseite (Hauptseite) Seite [Status Monitor/Abbruch] Seite [Einstellungen/Speicherung] Seite [Adressbuch] Portalseite (Hauptseite) [Logout] Damit melden Sie sich bei Remote UI ab. Die Login-Seite wird angezeigt. [Mail an Systemmanager] Zeigt ein Fenster zum Erstellen einer E-Mail an den unter [Informationen Systemmanager] in [Systemverwaltung] angegebenen Systemmanager an.
Seite [Status Monitor/Abbruch] [An Portal] Die Portalseite (Hauptseite) wird wieder angezeigt. Menü Wenn Sie auf eine Option klicken, wird der Inhalt auf der rechten Seite angezeigt. des Gerätestatus Verwalten von Dokumenten und Anzeigen Brotkrümel (Breadcrumbs) Zeigt die Seiten an, die Sie bisher geöffnet haben, um zu der zurzeit angezeigten Seite zu gelangen. Sie können prüfen, welche Seite gerade angezeigt wird. Aktualisierungssymbol Aktualisiert die zurzeit angezeigte Seite.
Systemverwaltungseinstellungen [Einstellungen Systemverwaltung] können Sie nur festlegen, wenn Sie im Systemmanager-Modus angemeldet sind. Wenn Sie im Allgemeinen Benutzermodus angemeldet sind, wird nur [Systemverwaltung] angezeigt. Seite [Adressbuch] [An Portal] Die Portalseite (Hauptseite) erscheint. [Favoriten] Zeigt die Favoritenliste an. Speichern von Daten im Adressbuch [Kodierte Wahl] Zeigt die Liste der Nummern für die kodierte Wahl an.
0W5F-0A5 Verwalten von Dokumenten und Anzeigen des Gerätestatus Anzeigen des aktuellen Status von Druckdokumenten Überprüfen von Statistiken zu Dokumenten Überprüfen von Fehlerinformationen Überprüfen von Verbrauchsmaterial Anzeigen von technischen Daten des Geräts Anzeigen der Systemmanager-Informationen Anzeigen des Zählers für die Druckfunktion Der Dokumentdateiname wird nur mit 32 Zeichen angezeigt. Möglicherweise wird der Anwendungsname zum Dateinamen hinzugefügt.
Überprüfen von Fehlerinformationen Wenn ein Fehler auftritt, können Sie diese Seite aufrufen, indem Sie auf der Portalseite (Hauptseite) auf die Meldung unter [Fehlerinformationen] klicken. Portalseite (Hauptseite) Melden Sie sich bei Remote UI an ( Starten von Remote UI) [Statusmonitor/Abbruch] [Fehlerinformationen] Überprüfen von Verbrauchsmaterial Papierformat und Papiertyp für die Papierquelle, Tonerpatronen-Modellnummer usw. werden angezeigt.
Melden Sie sich bei Remote UI an ( Starten von Remote UI) [Statusmonitor/Abbruch] [Geräte-Eigenschaften] Anzeigen der Systemmanager-Informationen Informationen über das Gerät und den Systemmanager werden angezeigt. Diese Informationen legen Sie auf der Seite Einstellungen Systemverwaltung [Einstellungen/Registrierung] unter [Systemverwaltung] fest.
LINKS Remote UI-Bildschirme 㻠㻥㻢㻌㻛㻌㻣㻠㻠
0W5F-0A6 Einstellen von Menüoptionen über Remote UI Über Remote UI können Sie die verschiedenen Einstellungen für das Gerät ändern. Die meisten Einstellungen können auch am Gerät selbst festgelegt werden, aber manche Einstellungen stehen nur in Remote UI zur Verfügung. Bei einigen Einstellungen müssen Sie sich zunächst im Systemmanager-Modus anmelden, bevor Sie die Einstellungen ändern können. 1 2 3 Starten Sie Remote UI. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung].
Faxeinstellungen Faxeinstellungen (MF729Cx / MF728Cdw / MF628Cw) Scaneinstellungen Scaneinstellungen Druckeinstellungen Speichermedium Druckeinstellungen Speichermedium Druckereinstellungen Druckereinstellungen Einstellungen Ausgabebericht Drucken von Berichten und Listen Registrieren häufig verwendeter Kopiereinstellungen Favoriten-Einstellungen Speichern häufig verwendeter Faxeinstellungen Speichern häufig verwendeter Scaneinstellungen (E-Mail/I-Fax/Gemeinsamer Ordner/FTP-Server) Einstellungen
0W5F-0A7 Speichern/Laden gespeicherter Daten Im Gerät gespeicherte Adressbuchdaten oder Menüoptionen können Sie auf einem Computer speichern (exportieren). Außerdem können Sie auf dem Computer gespeicherte Daten auf das Gerät übertragen (importieren). Sie können die Empfänger im Adressbuch ganz einfach auf mehrere Geräte kopieren. * Diese Funktionen können Sie verwenden, wenn Sie im Systemmanager-Modus angemeldet sind.
0W5F-0A8 Speichern von Einstellungsdaten Sie können Daten wie die Adressbucheinträge und die Geräteeinstellungen exportieren und auf einem Computer speichern. Es wird empfohlen, wichtige Einstellungen regelmäßig zu sichern. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung]. 3 Klicken Sie auf [Import/Export] 4 Wählen Sie die zu exportierenden Einstellungen aus. [Export].
[Einstellungen/Registrierung] Aktivieren Sie dieses Kontrollkästchen, um die Geräteeinstellungen zu exportieren. [Passwort-Verschlüsselung] Geben Sie bis zu 32 alphanumerische Zeichen für ein Verschlüsselungspasswort ein. Geben Sie in [Bestätigen] dasselbe Passwort ein. Für den Export der Daten müssen Sie ein Verschlüsselungspasswort festlegen. Das Passwort wird beim Import der exportierten Daten benötigt. 5 6 Klicken Sie auf [Exportstart].
0W5F-0A9 Laden von Einstellungsdaten Laden (importieren) Sie die vom Gerät exportierten Daten. Sie können auch die Einstellungen von einem anderen Gerät importieren, wenn es sich um dasselbe Modell wie das Ihres Geräts handelt. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Registrierung]. 3 Klicken Sie auf [Import/Export] 4 Wählen Sie die zu importierenden Einstellungen aus. [Import].
[Einstellungen/Registrierung] Aktivieren Sie dieses Kontrollkästchen, um die Geräteeinstellungen zu importieren. 5 6 Klicken Sie auf [Importstart]. Klicken Sie auf [OK]. Die ausgewählten Einstellungsdaten werden in das Gerät geladen. 7 Klicken Sie auf [OK]. Wenn in Schritt 4 das Kontrollkästchen [Einstellungen/Registrierung] aktiviert wurde, wird das Gerät automatisch neu gestartet.
0W5F-0AA Speichern des Adressbuchs über Remote UI Über den Computer können Sie das Adressbuch des Geräts speichern oder bearbeiten. Legen Sie hier den gemeinsamen Ordner oder die Adresse des FTP-Servers fest. Sie können die Einstellungen nur ändern, wenn Sie im Systemmanager-Modus angemeldet sind. 1 2 Starten Sie Remote UI. Starten von Remote UI Klicken Sie auf [Adressbuch]. Wenn der Bildschirm zur Eingabe der PIN angezeigt wird Das Adressbuch ist durch eine PIN geschützt.
Wenn Sie einen gespeicherten Eintrag löschen möchten, klicken Sie auf die entsprechende Schaltfläche [Löschen]. 5 Wählen Sie [Empfängertyp für die Registrierung], und klicken Sie auf [OK]. Zum Speichern des gemeinsamen Ordners oder der Adresse des FTP-Servers wählen Sie [Datei] aus. 6 Legen Sie die nötigen Einstellungen fest. Speichern von Daten im Adressbuch So speichern Sie den gemeinsamen Ordner oder die Adresse des FTP-Servers [Name] Geben Sie den Namen für den Empfänger ein.
"\\swan.organization.company.com\share"). [Ordnerpfad] Geben Sie den Speicherort des Ordners ein, an den die Daten gesendet werden (bis zu 120 Zeichen). [Anwendername] Geben Sie den für den gemeinsamen Ordner oder den FTP-Server festgelegten Anwendernamen ein (bis zu 32 Zeichen). [Passwort einstellen] Zum Festlegen eines Passworts für den gemeinsamen Ordner oder den FTP-Server aktivieren Sie dieses Kontrollkästchen, und geben Sie ein [Passwort] mit bis zu 32 Zeichen ein.
0W5F-0AC Liste der Menüeinstellungen Bei diesem Gerät gibt es verschiedene Einstellungen. Sie können jede der Einstellungen ausführlich anpassen. Rufen Sie die Einstellungen über auf dem Bildschirm ab.
0W5F-0AE Netzwerkeinstellungen Zu allen Einstellungen zum Netzwerk ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF724Cdw / MF628Cw zur Verfügung. Mit "*2" markierte Einstellungen können nicht importiert oder exportiert werden.
Zugriffspunkt wählen Wireless LAN-Router, die auf das Gerät zugreifen können, werden automatisch lokalisiert, sodass Sie sie aus der Liste auswählen Konfiguration der können. Sie müssen manuell den Netzwerkschlüssel, wie einen WEP-Schlüssel oder einen PSK, eingeben. Verbindung durch Auswahl eines Wireless LAN-Routers Manuell eingeben Wählen Sie diese Einstellung, wenn Sie zur Konfiguration der Wireless LAN-Verbindung manuell eine SSID eingeben möchten.
Einstellungen TCP/IP Legen Sie die Einstellungen für die Verwendung des Geräts in einem TCP/IP-Netzwerk wie die IP-Adresseinstellungen fest. Einstellungen IPv4 Legen Sie die Einstellungen für die Verwendung des Geräts in einem IPv4-Netzwerk fest. Einstellungen IP-Adresse Konfigurieren Sie die IP-Adresse, die in einem TCP/IP-Netzwerk zum Identifizieren von Geräten wie Computern oder Druckern Einstellen der IPv4-Adresse dient. Auto erfassen Protokoll wählen Aus DHCP IP autom.
Ein WINS-Serveradresse erfassen Aus Ein SMTP-Serveradresse erfassen Aus Ein POP-Serveradresse erfassen Aus Ein Einstellungen IPv6 Legen Sie die Einstellungen für die Verwendung des Geräts in einem IPv6-Netzwerk fest. IPv6 verwenden Aktivieren oder deaktivieren Sie IPv6 beim Gerät. Sie können auch die aktuellen Einstellungen anzeigen.
Einstellungen mDNS Legen Sie die Einstellungen für die Verwendung von DNS-Funktionen ohne DNS-Server fest. Konfigurieren von DNS Aus Ein Dens. mDNS-Namen wie IPv4 ver. Aus Name mDNS Ein Einstellungen DHCP-Option Wenn DHCP aktiviert ist, wählen Sie mithilfe dieser Einstellungen aus, ob die optionalen DHCP-Funktionen verwendet werden Konfigurieren von DNS sollen, um die DNS-Serveradresse oder den Domänennamen abzurufen.
WSD-Scan verwenden Aus Ein Computer-Scan verwenden Aus Ein Multicast Discovery verwenden Aus Ein Modus FTP PASV verwenden Geben Sie an, ob der PASV-Modus für FTP verwendet werden soll. Wenn Sie durch eine Firewall eine Verbindung zu einem FTP-Server Konfigurieren des PASV-Modus für FTP herstellen, müssen Sie den PASV-Modus auswählen.
1 bis 80 bis 65535 Multicast Discovery 1 bis 427 bis 65535 POP3 1 bis 110 bis 65535 SMTP 1 bis 25 bis 65535 FTP 1 bis 21 bis 65535 SNMP 1 bis 161 bis 65535 MTU-Format Wählen Sie die maximale Größe der vom Gerät gesendeten oder empfangenen Pakete.
Aktivieren oder deaktivieren Sie das Überwachen der Druckerverwaltungsinformationen über einen Computer im Netzwerk, auf dem SNMP-kompatible Software ausgeführt wird. Aus Ein Wählen Sie oder Einstellungen zugewiesener Port Aktivieren oder deaktivieren Sie den dedizierten Port.
Ein Einstellungen IEEE 802.1X *2 Aktivieren oder deaktivieren Sie die IEEE 802.1X-Authentisierung. Konfigurieren der IEEE 802.1X-Authentisierung Aus Ein Starten Sie das Gerät neu Wählen Sie oder Verwaltung Geräte-Einstellungen Ein/Aus Geben Sie an, ob Sie Geräteverwaltungssoftware wie iW Management Console zur Verwaltung der Gerätedaten wie Einstellungen und Empfänger im Adressbuch verwenden.
0W5F-0AF Präferenzen Zu allen Einstellungen zum Display und zum Layout der englischen Tastatur ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF628Cw zur Verfügung. Mit "*2" markierte Einstellungen können nicht importiert oder exportiert werden. Mit "*3" markierte Einstellungen haben je nach dem Land oder der Region, wo das Gerät gekauft wurde, andere Standardwerte.
Fünf Stufen einzustellen Tippen Sie auf / , um die Helligkeit Umgekehrte Bildschirmfarben Wählen Sie , um die Displayfarben umzukehren. Wählen Sie , wenn das Display auch nach Einstellung der Helligkeit in schwer abzulesen ist. Aus Ein oder Wählen Sie Umschalten Eingabe in Millimeter/Zoll Wählen Sie die Maßeinheit.
Langsam Standard Schnell Geschwindigkeit Wählen Sie die Typ der Cursorbewegung Konfigurieren Sie, wie der Cursor nach der Eingabe eines Zeichens auf dem Bildschirm verschoben wird. Wählen Sie , um den Cursor nach etwa 1 Sekunde automatisch rechts neben das eingegebene Zeichen zu stellen. Wählen Sie , um den Cursor manuell rechts neben das eingegebene Zeichen zu stellen.
Geben Sie das Layout einer eventuell an das Gerät angeschlossenen USB-Tastatur an.
0W5F-0AH Timereinstellungen Zu allen Einstellungen zum Timer ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen je nach dem Land oder der Region, wo das Gerät gekauft wurde, eventuell nicht zur Verfügung oder haben andere Standardwerte. Mit "*2" markierte Einstellungen können nicht importiert oder exportiert werden. Mit "*3" markierte Einstellungen stehen nur beim MF724Cdw / MF623Cn zur Verfügung.
Einstellungen aktuelle/s Datum/Zeit*2 Stellen Sie das Datum und die Uhrzeit ein. Durch Tippen auf Sie das Datum und die Uhrzeit ein und wählen /. / verschieben Sie den Cursor, und durch Tippen auf / geben Stellen Sie ein, bevor Sie das Datum und die Uhrzeit einstellen. Wenn Sie die Einstellung für ändern, ändern sich Datum und Uhrzeit entsprechend.
Ein Start: Monat, Woche, Tag Ende: Monat, Woche, Tag einen Monat und einen Tag Wählen Sie Zeit bis zur automatischen Rückstellung Wenn eine bestimmte Zeit lang keine Taste gedrückt wird, werden der Bildschirm und die Einstellungen auf den Standardbildschirm zurückgesetzt (automatische Rückstellung). Legen Sie das Intervall für die automatische Rückstellung fest.
Wenn das Gerät eine bestimmte Zeit lang nicht bedient wurde oder keine zu verarbeitenden Daten vorlagen, wechselt das Gerät in den Schlafmodus, um den Stromverbrauch zu reduzieren (automatischer Schlafmodus). Legen Sie die Zeit fest, nach der das Gerät automatisch in den Schlafmodus wechselt. Das Gerät wechselt nicht automatisch in den Schlafmodus, wenn das Einstellmenü angezeigt Wechseln in wird. Es empfiehlt sich, die werkseitigen Standardeinstellungen zu verwenden, da Sie damit am meisten Strom sparen.
0W5F-0AJ Allgemeine Einstellungen Zu allen Einstellungen zur Bedienung der Papierkassette und des Papiereinzugsverfahrens ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Mit "*2" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF628Cw zur Verfügung.
Mehrzweckfach Aus Ein Kassette 1 Aus Ein Kassette 2 *1 Aus Ein Wählen Sie die Papierzufuhr Wählen Sie oder Wählen Sie die Funktion Funktionen Wählen Sie die Funktion, für die Sie die automatische Papierkassettenauswahl konfigurieren möchten. Wählen Sie für Funktionen wie das Drucken von Berichten und Listen sowie das Drucken von Bildern von einem USB-Speichergerät.
Wählen Sie oder Papierquellen Wählen Sie die Papierquelle, für die Sie die Einstellung ändern möchten. Wenn Sie Papier verwenden, das mit einem Logo bedruckt wurde, müssen Sie die Ausrichtung ändern, wenn Sie 1und 2-seitiges Drucken ausführen. Es empfiehlt sich, zu wählen, wenn Sie sich über die zu bedruckende Seite keine Gedanken machen möchten.
0W5F-0AK Kopiereinstellungen Zu allen Einstellungen zum Kopieren ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF724Cdw zur Verfügung. Mit "*2" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist.
Schärfe Sieben Stufen Farbabstimmung Gelb: 17 Stufen Magenta: 17 Stufen Cyan: 17 Stufen Schwarz: 17 Stufen Fein justieren Gelb Hoch: 17 Stufen Mittel: 17 Stufen Niedrig: 17 Stufen Magenta Hoch: 17 Stufen Mittel: 17 Stufen Niedrig: 17 Stufen Cyan Hoch: 17 Stufen Mittel: 17 Stufen Niedrig: 17 Stufen Schwarz Hoch: 17 Stufen Mittel: 17 Stufen Niedrig: 17 Stufen Initialisieren von Standardeinstellungen Wählen Sie diese Option aus, um die Standardkopiereinstellungen wiederherzustellen.
0W5F-0AL Faxeinstellungen Zu allen Einstellungen zum Faxen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen je nach dem Land, in dem Sie das Gerät verwenden, eventuell nicht zur Verfügung, variieren oder haben einen anderen Standardwert. Mit "*2" markierte Einstellungen können nicht importiert oder exportiert werden. Mit "*3" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw zur Verfügung.
die Archivierung von gesendeten Dokumenten. SE-Startgeschwindigkeit Stellen Sie die Startgeschwindigkeit für die Kommunikation von "33600 bps" absteigend ein. Nehmen Sie diese Einstellung vor, wenn es aufgrund einer schlechten Telefonverbindung lange dauert, bis das Senden von Faxen beginnt.
Wählen Sie den verwendeten Nebenstellentyp. Wenn Sie wählen, speichern Sie den Präfixcode auf dem nächsten Bildschirm Geben Sie mit den Zahlentasten den Präfixcode ein, tippen Sie auf , und tippen Sie dann auf . Wenn Sie keine Pause einfügen, wird der Präfixcode nicht gespeichert.
Pausenzeit einstellen *1 Wenn Sie zum Beispiel einen Anruf tätigen, indem Sie "0 - (Pause) - (Telefonnummer)" wählen, wird 0 zuerst gewählt und ein paar Sekunden später die Telefonnummer. Wenn Sie Faxe ins Ausland senden, müssen Sie die Empfänger angeben, indem Sie "(internationale Vorwahl) - (Ländervorwahl) - (Vorwahl) - (Faxnummer)" wählen, aber fortlaufende Ziffern, die ohne Pausen eingegeben werden, werden möglicherweise nicht richtig erkannt.
Legen Sie Einstellungen zum Hinzufügen der Absenderinformationen, einschließlich der Faxnummer und des Gerätenamens, zur Faxkopfzeile fest. Der Empfänger kann anhand der hinzugefügten Informationen erkennen, von wem das Fax gesendet wurde.
Ein Rundsendung beschränken Legen Sie fest, ob Rundsendungen unterbunden werden sollen. Bei dieser Funktion werden Faxe nacheinander an mehrere Empfänger Unterbinden von Rundsendungen (MF729Cx / MF728Cdw / gesendet. Diese Funktion kann bei Bedarf deaktiviert werden. MF628Cw) Aus Rundsendung bestätigen Rundsendung zurückweisen Standardeinstellungen initialisieren Wählen Sie diese Option aus, um die Standardeinstellungen für die Faxübertragung wiederherzustellen.
1 bis 2 bis 99 (Mal) Wenn Sie diese Funktion im Modus verwenden, müssen Sie Ihr Telefon zuvor an das Gerät anschließen. fest, wie oft das Klingelzeichen zu hören ist Legen Sie Remote EM *1 Legen Sie die Einstellungen für das Empfangen von Faxen über ein an das Gerät angeschlossenes Telefon fest (Fernempfang).
Zeit Speicherempfang Aus Ein Startzeit Speicherempfang Endzeit Speicherempfang Einstellungen EM-Druck Legen Sie die Einstellungen für das Drucken von empfangenen Faxen fest. Doppelseitig drucken *3 Legen Sie die Einstellungen für das Drucken von empfangenen Faxen auf beiden Seiten des Papiers fest.
Fußzeile bei Empfang Legen Sie fest, ob Informationen wie Empfangsdatum und -uhrzeit und die Seitenzahlen unten auf die empfangenen Dokumente gedruckt werden sollen. Aus Ein Weiterdrucken, wenn Tonermenge niedrig ist Das Gerät setzt den Druckvorgang fort, auch wenn der in der Tonerpatrone verbliebene Toner zur Neige geht.
Legen Sie fest, ob Faxdokumente im Gerät gespeichert werden sollen, wenn sie nicht erfolgreich weitergeleitet wurden. Sie können Drucken/Neusenden/Löschen von Dokumenten, die nicht die Dokumente später bei Bedarf neu senden oder drucken.
0W5F-0AR Scaneinstellungen Zu allen Einstellungen zum Scannen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen werden nur aktiviert, wenn das optionale Send PDF Security Feature Set gespeichert wurde. Mit "*2" markierte Einstellungen sind abhängig von der Einstellung für die PDF-Verschlüsselung verfügbar.
Ausrichtung Original Hochformat Querformat Originaltyp Text Text/Foto Foto Doppelseitiges Original*3 Aus Buchtyp Kalendertyp Schärfe Sieben Stufen Datengröße Klein: Vorrang Speicher Standard Groß: Vorrang Bildqualität Standardeinstellungen initialisieren Wählen Sie diese Option aus, um die Standardeinstellungen für das Speichern von Daten auf einem USB-Speichergerät wiederherzustellen.
Neun Stufen Ausrichtung Original Hochformat Querformat Originaltyp Text Text/Foto Foto Doppelseitiges Original*3 Aus Buchtyp Kalendertyp Schärfe Sieben Stufen Datengröße Klein: Vorrang Speicher Standard Groß: Vorrang Bildqualität Thema/Nachricht Thema Attached Image Nachricht Antwort an Ohne Aus Adressbuch angeben Vorrang Niedrig Standard Hoch Standardeinstellungen initialisieren Wählen Sie diese Option aus, um die Standardeinstellungen für die E-Mail-Übertragung wiederherzustellen.
Text/Foto Foto Doppelseitiges Original*3 Aus Buchtyp Kalendertyp Schärfe Sieben Stufen Thema/Nachricht Thema Attached Image Nachricht Antwort an Ohne Aus Adressbuch angeben Kopfzeile Informationen wie Datum und Uhrzeit der Übertragung und die E-Mail-Adresse des Geräts (Absenderinformationen) können in übertragenen Dokumenten als Kopfzeile hinzugefügt werden. Anhand dieser Informationen sieht der Empfänger, wann und von wem das I-Fax gesendet wurde.
EM-Druckformat Geben Sie das für den Druck zu verwendende Papierformat an. A4 LGL LTR OFICIO Brazil-OFICIO Mexico-OFICIO Government-LTR Government-LGL FOOLSCAP AUS-FOOLSCAP India-LGL Wählen Sie das Papierformat Dateieinstellungen Sie können die Einstellungen ändern und speichern, die beim Speichern von Dokumenten in einem gemeinsamen Ordner oder auf einem FTP-Server verwendet werden.
Doppelseitiges Original*3 Aus Buchtyp Kalendertyp Schärfe Sieben Stufen Datengröße Klein: Vorrang Speicher Standard Groß: Vorrang Bildqualität Standardeinstellungen initialisieren Sie können die Einstellungen ändern und speichern, die beim Speichern von Dokumenten in einem gemeinsamen Ordner oder auf einem FTP-Server verwendet werden.
Normal Vorrang Bildqualität Bildlevel in Textmodus Vorrang Datengröße Normal Vorrang Bildqualität OCR-Einstellungen (durchsuchbarer Text) Zur Ausführung von OCR (optische Zeichenerkennung) für ein Textdokument zur Erstellung einer "durchsuchbaren PDF-Datei" geben Sie an, ob das Gerät die Textrichtung des Dokuments bestimmt und die Dokumentrichtung erkennt.
0W5F-0AS Druckeinstellungen Speichermedium Zu allen Einstellungen zum Speichermediendruck ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Mit "*2" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF724Cdw zur Verfügung.
Aus Auto Passwort, um Dokument zu öffnen Andere Halbtöne Fehlerstreuung: Aus /Ein Reinschwarzer Text Aus Ein Schwarz überdrucken Aus Ein RGB-Quellprofil sRGB Gamma 1,5 Gamma 1,8 Gamma 2,4 Ohne CMYK-Simulationsprofil JapanColor(Canon) U.S. Web Coated v1.00 (Canon) Euro Standard v1.
oder Wählen Sie Zeigt Dateinamen und Datumsangaben in Form einer Liste an. Zeigt Miniaturbilder als Vorschau an. Standardeinstellungen Dateisortierung Legen Sie fest, ob Dateien auf einem USB-Speichergerät in auf- oder absteigender Reihenfolge nach Dateiname oder Datum sortiert angezeigt werden sollen.
unterscheiden, werden Zahlen wie "~ 1" oder "~ 2" an das Ende des Dateinamens angehängt. Zeigt bis zu 20 Zeichen für die Dateinamen an. Bei der oben genannten Anzahl an Zeichen sind die Zeichen für die Dateierweiterung wie ".jpg" nicht inbegriffen. Standardeinstellungen initialisieren Setzt die Speichermediumdruck-Einstellungen auf die werkseitigen Standardwerte zurück.
0W5F-0AU Druckereinstellungen Zu allen Einstellungen zum Drucker ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Mit "*2" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF724Cdw zur Verfügung. Mit "*3" markierte Einstellungen stehen nur beim MF729Cx zur Verfügung.
Wählen Sie die Wählen Sie oder anzeigen> Kopien *2 Legen Sie die Anzahl der zu druckenden Kopien fest. 1 bis 99 (Kopien) Legen Sie die Anzahl der zu druckenden Kopien fest Doppelseitiger Druck *2 Legen Sie fest, ob der Ausdruck doppelseitig erfolgen soll.
LGL STMT EXEC Nr. 10 (COM10) Monarch DL ISO-C5 Standardpapiertyp Wählen Sie die Standardeinstellung für den Typ des zu bedruckenden Papiers. Normal 1 (60-74 g/m²) Normal 2 (70-84 g/m²) Normal 3 (75-90 g/m²) Recycling Farbig Schwer 1 (86-119 g/m²) Schwer 2 (120-128 g/m²) Schwer 3 (129-163 g/m²) Beschichtet 1 (100-110 g/m²) Beschichtet 2 (120-130 g/m²) Beschichtet 3 (155-165 g/m²) Beschichtet 4 (210-220 g/m²) Folien Etiketten Briefumschlag Wenn Sie in einen Briefumschlag (
Schwarz 17 Stufen Die für festgelegten Einstellungen werden deaktiviert, wenn Sie aktivieren. die Tonerdichte fest Wählen Sie die Tonerfarbe Legen Sie Dichte (Fein justieren) Justieren Sie die Tonerdichte für jede Tonerfarbe. Sie können die Dichte für dunklere (), mittlere () und hellere Bereiche () getrennt einstellen.
Wenn Sie diese Einstellung aktivieren, sind feine Linien und Bereiche mit geringerer Druckdichte möglicherweise verschwommen. Wählen Sie oder Gradation Wählen Sie die Datenverarbeitungsmethode zum Reproduzieren von Abstufungen. Wählen Sie , wenn Sie mit höherer Qualität als bei drucken möchten.
Glättet die Kanten von Objekten (Text, Linien, Grafiken und fotografische Bilder). Druckt Bilder und Halbtöne gleichmäßig. Glättet ganze Objekte. Wenn Sie auf setzen ( Halbtöne), haben , , und dieselbe Wirkung auf Ausdrucke wie . Zeilenkontrolle Wählen Sie die Datenverarbeitungsmethode zum Reproduzieren von Linien.
Lange Kante Kurze Kante Sie können nicht allein mit dieser Einstellung einen Rand für die Bindung erstellen. Verwenden Sie diese Einstellung zusammen mit , um den Rand für die Bindung an der gewünschten Position einzustellen. Kante> Wählen Sie oder ausgewählten Bindungsposition fest.
Wenn Sie die Versatzeinstellungen zusammen mit festlegen, werden die angegebenen Werte addiert. fest Legen Sie den Versatzwert Versatz lange Kante (Vorne) Legen Sie die Druckposition durch Angabe des Versatzwerts für die lange Kante an der Vorderseite des Papiers fest. Bei einem höheren Wert verschiebt sich die Druckposition nach unten. Bei einem niedrigeren Wert verschiebt sich die Druckposition nach oben.
Wert verschiebt sich die Druckposition nach unten. Bei einem niedrigeren Wert verschiebt sich die Druckposition nach oben. -50,0 bis ±0 bis +50,0 (mm) Wenn sich ein Teil der Druckdaten außerhalb des bedruckbaren Bereichs befindet, nachdem Sie diese Einstellung vorgenommen haben, werden die Teile außerhalb des bedruckbaren Bereichs nicht gedruckt.
Legen Sie die Dauer fest Modus *2 Mit dieser Einstellung kann das Gerät vom Host-Computer empfangene Daten im angegebenen Datenformat verarbeiten. Wenn Sie den Modus Personality auf setzen, bestimmt das Gerät den Typ der vom Host empfangenen Daten pro Auftrag. Wenn Sie über Anwendungen auf einem Computer drucken, wird die Verwendung der Option empfohlen.
Legen Sie die Gradationseinstellungen fest Ausgabe komprimiertes Bild *2 Legen Sie fest, was mit Druckdaten geschehen soll, für die die Speicherkapazität des Geräts nicht ausreicht. Sie können die Daten in niedrigerer Bildqualität drucken () oder das Drucken abbrechen und eine Fehlermeldung anzeigen lassen ().
Schriftnummer Legen Sie die gewünschte Schriftart fest, indem Sie eine ID-Nummer auswählen. Über das Bedienfeld können Sie die PCLFontliste PCL (MF729Cx / MF728Cdw / MF724Cdw) Schriftartenliste mit Beispielen für Schriftarten drucken. MF729Cx 0 bis 104 MF728Cdw / MF724Cdw 0 bis 54 Wählen Sie die Schriftartennummer Punktgröße Legen Sie die Schriftgröße in Schritten von 0,25 Punkten fest.
Zeichencode Wählen Sie den Zeichencode, der für den Computer, von dem Sie Druckdaten senden, am besten geeignet ist. Die Einstellung wird ignoriert, wenn der Zeichencode durch die in festgelegte Schriftart vorgegeben wird.
Wählen Sie oder Maßeinheit Wählen Sie die Maßeinheit für das Einstellen eines anwenderdefinierten Papierformats. Millimeter Zoll Wählen Sie oder X-Ausrichtung Legen Sie die Breite (kurze Kante) des anwenderdefinierten Papierformats fest.
Ja Nein Wählen Sie oder A4-Druckbreite vergrößern Legen Sie fest, ob die Breite des bedruckbaren Bereichs beim A4-Format im Hochformat auf die Breite des LTR-Formats vergrößert werden soll. Aus Ein Wählen Sie oder Halbtöne Legen Sie die Datenverarbeitungsmethode zum Reproduzieren von Halbtönen fest.
Kleiner Text und feine Linien werden deutlich gedruckt. Wenn Sie für diese Einstellung wählen, werden die für , und gewählten Einstellungen und deaktiviert. / Text und dünne Linien werden besonders deutlich gedruckt. Abstufungen in Grafiken und fotografischen Bildern werden mit fließenden Übergängen gedruckt.
Normal Foto Diese Einstellung steht nur zur Verfügung, wenn Sie für die Einstellung wählen. Wählen Sie oder Wählen Sie , oder Abgleichmethode Wählen Sie die Farbabgleichmethode für den Abgleich der Farben der Ausdrucke mit denen auf dem Computermonitor. Sie können die Einstellung für Text, Grafiken und Bilder getrennt festlegen.
Grauausgleich Legen Sie fest, ob Graudaten (Schwarzweiß) nur mit schwarzem Toner gedruckt werden sollen. Sie können die Einstellung für Text, Grafiken und Bilder getrennt festlegen. Text Aus Ein Grafiken Aus Ein Bild Aus Ein Wählen Sie oder Wählen Sie , oder Graudaten (Schwarzweiß) werden mit allen Tonerfarben (Gelb , Magenta, Cyan und Schwarz) gedruckt.
Text Gamma CMS Grafiken Gamma CMS Bild Gamma CMS Wählen Sie oder oder Wählen Sie , Gammakorrektur Legen Sie den Gammakorrekturwert fest, wenn die Helligkeit der Ausdrucke der Helligkeit der Originaldaten entsprechen soll. Wenn der Ausdruck dunkler oder heller als das Original wirkt, ändern Sie den Gammakorrekturwert. Je höher der Wert, desto dunkler der Ausdruck.
Auf Text anwenden Aus Ein Legen Sie die Glättungseinstellung fest BarDIMM*3 Mit dieser Einstellung können Sie Barcodes drucken, die vom Barcode Printing Kit unterstützt werden. Wenn ausgewählt wird, generiert das Gerät Barcodes, wenn es Barcodebefehle vom Host-Computer empfängt. Wenn ausgewählt wird, werden keine Barcodes generiert, auch wenn Barcodebefehle vom Host-Computer gesendet werden.
Wählen Sie einen Escape-Code PS *2 Legen Sie die Einstellungen für den PS-Druck wie das Seitenlayout und die Druckqualität fest. Timeout Auftrag Mit dieser Einstellung können Sie die Dauer bis zur Zeitüberschreitung des Geräts angeben. Wenn ein Auftrag innerhalb des angegebenen Zeitlimits nicht abgeschlossen wird, wird der Auftrag automatisch abgebrochen. 0 bis 3.
Wenn für die Option ausgewählt wird, werden sehr helle oder fein detaillierte Bilder möglicherweise nicht deutlich gedruckt. Wählen Sie oder Der schwarze Text wird mit den Tonern CMYK auf der Basis der ausgewählten Ausgabeprofileinstellung gedruckt. Für einige Aufträge sollte diese Option auf gesetzt werden.
den ausgesparten Bereich gedruckt. Wenn diese Einstellung zusammen mit verwendet wird, wird zunächst der farbige Hintergrund gedruckt und anschließend der schwarze Text in 100 % Schwarz über den Hintergrund gedruckt. RGB-Quellprofil Wählen Sie das Quellprofil für den Farbabgleich zum Drucken von RGB-Daten je nach dem verwendeten Monitor.
Wenn ausgewählt wird, sind Bereiche mit dunkler Farbe abhängig von den Daten möglicherweise fleckig. Simulationsprofil Wählen Sie das das CMYK- Diese Einstellung verwendet das Profil JapanColor. Mit dieser Einstellung erhalten Sie einen Ausdruck, der dem Druckstandard in Japan sehr ähnlich ist. Diese Einstellung verwendet das Profil U.S. Web Coated.
Mit dieser Einstellung können Sie das Profil definieren, das für die zu druckenden Daten geeignet ist. Es wird auf alle Daten im Druckauftrag angewendet. Achten Sie also darauf, dass das ausgewählte Profil für Ihren Auftrag das richtige ist.
Mit dieser Einstellung werden die besten Ergebnisse für fotografische Bilder und Bitmap-Bilder erzielt. Diese Einstellung eignet sich am besten für den Druck von Abbildungen und Diagrammen in Geschäftspräsentationen. Mit dieser Einstellung werden Ergebnisse erzielt, die mit dem RGB-Farbwert des Gerätedruckbereichs fast übereinstimmen.
Vorgang CMYK Reinschwarz Mit dieser Einstellung können Sie angeben, wie monochrome Daten (C=M=Y=0) gedruckt werden sollten, wenn die geräteabhängigen CMYK-Daten mit dem des Geräts verarbeitet werden. Aus Ein In Kombination mit bestimmten Einstellungen werden monochrome Daten (C=M=Y=0) möglicherweise nur mit dem schwarzen Toner (K) gedruckt, auch wenn ausgewählt wurde.
Kleiner Text und feine Linien werden deutlich gedruckt. Wenn Sie für diese Einstellung wählen, werden die für , und gewählten Einstellungen und deaktiviert. / Text und dünne Linien werden besonders deutlich gedruckt. Abstufungen in Grafiken und fotografischen Bildern werden mit fließenden Übergängen gedruckt.
Mit dieser Einstellung wird kein Überdrucken auf Schmuckfarben angewendet. Wenn für eine andere Einstellung als ausgewählt wird, wird kein Überdrucken angewendet. (Siehe CMYK-Simulationsprofil) Wählen Sie oder Erweiterte Glättung Legen Sie fest, wie gezackte Konturen bei Text und Grafiken geglättet werden. Sie können die Einstellung für Text und Grafiken getrennt anwenden.
Sie können beim Drucken von Farbdruckdaten unter verschiedenen Möglichkeiten zur Konvertierung von Farbwerten in einen Graustufenwert wählen. sRGB NTSC RGB einheitlich Diese Einstellung ist für Schwarz-Weiß-Daten ungültig. Graustufenkonversion fest Legen Sie die Sie können den Graustufenwert anhand der auf sRGB basierenden Farbkonvertierungsmethode berechnen.
0W5F-0AW Justage/Wartung Zu allen Einstellungen zur Justage und zur Wartung ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit (* ) markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Gradation automatisch justieren Einstellungen automatische Korrektur Farbabgleich f. Druck korrigieren Zeitpunkt für Benachr. zur Patronenvorbereitung anzeigen Verarb.
Legen Sie fest, ob die Funktion "Druck Farbabgleich korrigieren" automatisch nach dem Einschalten des Geräts ausgeführt werden soll. Sie können diese Korrektur auch manuell ausführen ( Korrektur von Druck-Farbverzerrungen). Aus Ein Wählen Sie oder Hauptstrom EINgesch. ist>
Einstellungen Rückseite Manuell (nur für Doppelseitig) Wenn Ausdrucke auf der Rückseite bedruckten Papiers zu hell sind, wählen Sie . Sie können diese Einstellung für jede Papierquelle getrennt festlegen.
Briefumschlag>
Reinigen Sie die Fixiereinheit nach dem Austauschen einer Tonerpatrone oder bei schwarzen Streifen im Ausdruck. ITB reinigen Reinigen Sie die Transferriemen im Gerät, damit die Druckqualität nicht sinkt. Transferriemen Zufuhr reinigen Reinigen Sie die Zufuhrrollen, wenn Dokumente beim Durchlaufen der Zufuhr verschmutzt werden.
0W5F-0AX Einstellungen Systemverwaltung Zu allen Einstellungen zu den Systemverwaltungseinstellungen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. Sterne (* ) Mit "*1" markierte Einstellungen können nicht importiert oder exportiert werden. Mit "*2" markierte Einstellungen stehen nur beim MF729Cx zur Verfügung. Mit "*3" markierte Einstellungen stehen nur beim MF729Cx / MF728Cdw / MF724Cdw zur Verfügung.
Sie das Gerät neu Wählen Sie oder Starten Einstellungen Informationen Systemmanager Legen Sie die ID oder PIN fest, die ausschließlich für Administratoren mit Zugriff auf und gilt. ID ist und PIN ist . Sie können auch den Namen eines Einstellen der Systemmanager-ID Administrators speichern.
oder Wählen Sie Sicherheitseinstellungen Aktivieren oder deaktivieren Sie Einstellungen für die verschlüsselte Kommunikation über SSL oder IPSec sowie die Einstellungen für die Paketfilterung mithilfe von IP- oder MAC-Adressen. SSL verwenden Legen Sie fest, ob die Kommunikation mit SSL-Verschlüsselung verwendet werden soll.
IPv6-Adressfilter Aktivieren oder deaktivieren Sie Einstellungen für die Filterung von Paketen, die an Geräte mit bestimmten IPv6-Adressen gesendet Angeben von IP-Adressen für Firewallregeln bzw. von diesen empfangen werden.
Region Wählen Sie ein Land oder eine Einstellungen Remote UI *1 Konfigurieren Sie Einstellungen für die Verwendung von Remote UI. Mit Remote UI können Sie Geräteeinstellungen über einen Webbrowser konfigurieren. Remote UI verwenden Wählen Sie aus, ob Remote UI verwendet werden soll. Mit Remote UI können Sie Geräteeinstellungen über einen Webbrowser Deaktivieren von Remote UI konfigurieren.
PIN Adressbuch Legen Sie eine PIN fest, die beim Hinzufügen neuer oder beim Bearbeiten vorhandener Adressbucheinträge eingegeben werden muss. Festlegen einer PIN für das Adressbuch Neue Empfänger beschränken Wählen Sie aus, ob nur die bereits im Adressbuch gespeicherten Faxnummern und E-Mail-/I-Faxadressen als Empfänger angegeben Einschränken der verfügbaren Empfänger werden können.
MF729Cx Aus Ein MF728Cdw / MF724Cdw / MF628Cw / MF623Cn Aus Ein Speichermedium Druck Ein/Aus Legen Sie fest, ob verhindert werden soll, dass auf einem an das Gerät angeschlossenen USB-Speichergerät gespeicherte Dokumente Einschränken der USB-Druckfunktion gedruckt werden. MF729Cx Aus Ein MF728Cdw / MF724Cdw / MF628Cw / MF623Cn Aus Ein Product Extended Survey Program aktivieren Aktivieren oder deaktivieren Sie das Product Extended Survey Program (ein Programm zur Erfassung der Gerätenutzung).
Wählen Sie aus, um zu verhindern, dass eine Schaltfläche, über die auf Websites zum Erwerb von Tonerpatronen zugegriffen wird, in Remote UI angezeigt wird. Wenn Sie Toner Status nicht verwenden wollen, wählen Sie aus. Wenn Sie verhindern wollen, dass eine Schaltfläche, über die auf Websites zum Erwerb von Tonerpatronen zugegriffen wird, in Toner Status angezeigt wird, wählen Sie und dann aus.
Import/Export der Einstellungen *1 Sie können über ein USB-Speichergerät Adressbuchempfänger und andere Arten von Einstellungsdaten importieren und exportieren. Verwenden eines USB-Speichergeräts zum Exportieren/Importieren von gespeicherten Daten Import Export Einstellungen geschützter Druck *3 Aktivieren oder deaktivieren Sie den geschützten Druck. Drucken mit der Funktion für geschützten Druck Aus Ein Löschzeitpkt. geschützt. Druck 10 bis 30 bis 240 (Min.) OS für mit USB angeschl.
Wählen Sie eine Seitenbeschreibungssprache, damit das Gerät als ein mit dieser Sprache kompatibler Drucker erkannt wird, wenn Sie es über USB an einen Computer anschließen. FAX *4 UFRII LT UFRII LT (V4) PCL5 *3 PCL6 *3 PS*3 wird angezeigt, wenn auf gesetzt ist.
Geben Sie einen Lizenzschlüssel zur Aktivierung von Optionsfunktionen ein.
0W5F-0AY Fehlerbehebung Schlagen Sie in diesem Kapitel nach, wenn ein Problem auftritt, um möglicherweise eine Lösung zu finden, bevor Sie sich mit Canon in Kontakt setzen. Papierstau Bei einem Dokumenten- oder Papierstau lesen Sie bitte unter gestaute Papier entfernen.
0W5F-0C0 Beheben von Dokumenten- und Papierstaus Wenn es zu einem Papierstau kommt, wird auf dem Bildschirm angezeigt. Tippen Sie auf , um einfache Lösungen anzuzeigen. Wenn die Schritte im Display schwer zu verstehen sind, schlagen Sie unter den folgenden Abschnitten nach, um den Papierstau zu beheben. MF729Cx / MF728Cdw / MF724Cdw Dokumentenstaus in der Zufuhr (MF729Cx / MF728Cdw / MF724Cdw)
1 2 3 Nehmen Sie das gestaute Dokument aus der Abdeckung der Zufuhr. 1 Öffnen Sie die Zufuhrabdeckung. 2 Verschieben Sie zum Entriegeln den Hebel. 3 Ziehen Sie das Dokument behutsam heraus. Nehmen Sie das gestaute Dokument unter der internen Abdeckung in der Zufuhr heraus. 1 Halten Sie den grünen Knopf gedrückt, und öffnen Sie die interne Abdeckung. 2 Ziehen Sie das Dokument behutsam heraus. 3 Schließen Sie die interne Abdeckung.
1 Öffnen Sie die vordere Abdeckung. 2 Heben Sie das Bedienfeld an. 3 Ziehen Sie das Papier behutsam heraus. 4 Senken Sie das Bedienfeld, und schließen Sie die vordere Abdeckung. Papierstau in der manuellen Zufuhr (MF729Cx / MF728Cdw / MF724Cdw) Wenn Papier in die Kassette eingelegt ist, entfernen Sie es zuerst. Entfernen Sie gestautes Papier nicht gewaltsam aus dem Gerät. Wenn gestautes Papier nicht einfach entfernt werden kann, fahren Sie mit dem nächsten Schritt fort.
Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Halten Sie die grünen Knöpfe, und drücken Sie das in der Abbildung gezeigte Teil nach unten. 3 Ziehen Sie das Papier behutsam heraus. Berühren Sie nicht die Gummiauflage Andernfalls kann die Druckqualität beeinträchtigt werden.
Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Ziehen Sie das Papier behutsam heraus. Wenn die optionale Papierkassette (Kassette 2) angebracht ist, ziehen Sie das Papier vorsichtig auf die gleiche Art heraus. 3 4 Setzen Sie die Papierkassette ein. Wenn der unten dargestellte Bildschirm angezeigt wird, tippen Sie auf .
4 Halten Sie die grünen Knöpfe, und schließen Sie die Duplexeinheit fest ( 5 Ziehen Sie das Papier behutsam heraus. 6 Schließen Sie die hintere Abdeckung. ), bis sie hörbar einrastet. Dokumentenstaus in der Zufuhr (MF628Cw / MF623Cn) Wenn Dokumente in die Zufuhr eingelegt wurden, entfernen Sie diese zuerst. Befolgen Sie dann die unten aufgeführten Schritte. 1 Öffnen Sie die Abdeckung der Zufuhr. 2 Ziehen Sie das Dokument behutsam heraus. 3 Schließen Sie die Abdeckung der Zufuhr.
Papierstau an der Vorder- und der Rückseite 1 Heben Sie das Bedienfeld an. 2 Ziehen Sie das Papier behutsam heraus. 3 4 Senken Sie das Bedienfeld. Öffnen Sie die hintere Abdeckung. 5 Ziehen Sie das Papier behutsam heraus. 6 Schließen Sie die hintere Abdeckung. Papierstau in der manuellen Zufuhr (MF628Cw / MF623Cn) 1 Ziehen Sie die Papierkassette heraus. Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus.
2 3 Halten Sie die grünen Knöpfe, und drücken Sie das in der Abbildung gezeigte Teil nach unten. 4 Ziehen Sie das Papier behutsam heraus. 5 Halten Sie die grünen Knöpfe, bringen Sie das in der Abbildung gezeigte Teil wieder in die Ausgangsposition, und schließen Sie die Abdeckung. Bringen Sie das in der Abbildung gezeigte Teil wieder in die Ausgangsposition, bis es mit einem Klicken einrastet. 6 7 Setzen Sie die Papierkassette ein.
0W5F-0C1 Wenn eine Fehlermeldung erscheint Wenn Sie kein Fax senden können, der Speicher voll ist oder es zu Problemen beim Bedienen des Geräts kommt, erscheint eine Meldung im Display. Weitere Informationen zu Meldungen finden Sie in der folgenden Liste. Schwarzweiß-Kopieren ist beschränkt. Möchten Sie Farbkopien erstellen? Das Kopieren in Schwarzweiß wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert.
Zugriffspunkt kann nicht gefunden werden. Beim Versuch der automatischen Einstellung mit WPS konnte innerhalb einer festgelegten Dauer kein Wireless LAN-Router gefunden werden. Stellen Sie die Verbindung wieder her und beachten Sie das Zeitlimit. Konfiguration der Verbindung über die WPS-Taste Konfiguration der Verbindung über die Eingabe des WPS-PIN-Codes Die SSID oder der Netzwerkschlüssel eines Wireless LAN-Routers wurde manuell eingegeben, aber die Eingabe war falsch.
Angeben einer Gruppe nicht möglich. Nach dem Tippen auf wurde ein für die Gruppenwahl gespeicherter Empfänger angegeben. Sobald Sie auf tippen, können Sie keine für die Gruppenwahl gespeicherten Empfänger angeben. Tippen Sie auf dem Bildschirm auf die Taste , und geben Sie dann Empfänger an, um Faxdokumente zu senden, ohne auf zu tippen. Google Cloud Print unmögl. Server-Authent. fehlgeschl.
Authentisierungspasswort ändern. Das Passwort ist abgelaufen. Legen Sie ein neues Passwort fest. Auth.einstellungen prüfen. Die auf dem Gerät festgelegte Authentisierungsmethode stimmt nicht mit der auf dem RADIUS-Server festgelegten Authentisierungsmethode überein. Überprüfen Sie, ob auf diesem Gerät und dem RADIUS-Server dieselbe Authentisierungsmethode festgelegt wurde, und legen Sie die korrekte Authentisierungsmethode fest. Konfigurieren der IEEE 802.1X-Authentisierung Reinigung fehlgeschlagen.
Verbindung fehlgeschlagen. PSK-Einstellungen prüfen. Der Netzwerkschlüssel (PSK) eines Wireless LAN-Routers, zu dem eine Verbindung hergestellt werden soll, ist im Gerät nicht richtig konfiguriert. Prüfen Sie den Netzwerkschlüssel (PSK) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät.
Konfigurieren der Einstellungen für die direkte Verbindung (Access Point-Modus) (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw) Verbindung über WLAN nicht möglich. System AUS- und EINschalten, dann die Einstellungen erneut konfigurieren. Die Verbindung ist aufgrund eines Fehlers beim Einstellen der Wireless LAN-Verbindung fehlgeschlagen. Starten Sie das Gerät neu, und stellen Sie die Verbindung erneut ein.
. Anzeigen der MAC-Adresse für WLAN Authentisierung von gemeinsamem Schlüssel konnte nicht ausgeführt werden. WEP-Einstellungen prüfen. Der Netzwerkschlüssel (WEP-Schlüssel) eines Wireless LAN-Routers, zu dem eine Verbindung hergestellt werden soll, ist im Gerät nicht richtig konfiguriert. Prüfen Sie den Netzwerkschlüssel (WEP-Schlüssel) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät.
Die Tonerpatrone muss ausgetauscht werden. So tauschen Sie Tonerpatronen aus Speicher voll. Fehlerinfo über "Statusmonitor" prüfen. Der Speicher ist voll mit Druckdaten, die aufgrund von Fehlern nicht ausgedruckt werden konnten. MF729Cx / MF728Cdw / MF724Cdw Brechen Sie das Drucken der Dokumente mit Fehlern ab. Abbrechen des Druckens MF628Cw / MF623Cn Brechen Sie das Drucken der Dokumente mit Fehlern ab, oder drucken Sie die Dokumente durch Auswahl von .
Überprüfen Sie den Status der Netzwerkkabel und der Schalter. Keine Antwort vom Host. Das Gerät ist nicht richtig mit einem Netzwerk verbunden. Überprüfen Sie die Geräte- und Netzwerkeinstellungen, und versuchen Sie erneut, eine Verbindung herzustellen. Anschließen an ein Netzwerk Papier ist gestaut. Es liegt ein Papierstau vor. Entfernen Sie das gestaute Papier oder Dokument, und drucken Sie erneut. (Möglicherweise wird das Drucken auch automatisch fortgesetzt.
Tonerpatrone (Cyan) vorbereiten. Die in den Tonerpatronen verbliebene Tonermenge geht zur Neige. Halten Sie eine neue Tonerpatrone bereit. Verbrauchsmaterial Tonerpatrone (Magenta) vorbereiten. Die in den Tonerpatronen verbliebene Tonermenge geht zur Neige. Halten Sie eine neue Tonerpatrone bereit. Verbrauchsmaterial Gelbe Patrone vorbereiten. Die in den Tonerpatronen verbliebene Tonermenge geht zur Neige. Halten Sie eine neue Tonerpatrone bereit. Verbrauchsmaterial Drucken ist beschränkt.
So tauschen Sie Tonerpatronen aus Scannen ist beschränkt. Das Scannen wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert. Melden Sie sich mit einer Abteilungs-ID an, für die das Scannen nicht deaktiviert ist. Informationen zur Abteilungs-ID und PIN erhalten Sie bei Ihrem Administrator. Einstellen der Verwaltung per Abteilungs-IDs Richtige Auth.informationen einstellen.
Auf dem Drucker ist kein Zertifizierungsstellenzertifikat gespeichert, das mit dem Authentisierungsserverzertifikat kompatibel ist. Vergewissern Sie sich, dass auf dem Drucker ein Zertifizierungsstellenzertifikat gespeichert ist, das mit dem Authentisierungsserverzertifikat kompatibel ist. Konfigurieren der IEEE 802.1X-Authentisierung Der Computer ist beschränkt. Das Scannen über das Bedienfeld wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert.
Speicher voll. Einstellungen für Originaltyp erneut eingeben. Ein Dokument konnte nicht gescannt werden, da die Speicherkapazität beim Kopieren überschritten wurde. Setzen Sie auf , und kopieren Sie. Auswählen von Dokumententypen Speicher voll. Geschützte Druckaufträge ausführen. Der Speicher ist voll mit geschützten Dokumenten, die nicht ausgedruckt wurden. Drucken Sie die geschützten Dokumente im Speicher.
WEP-Schlüssel ist nicht korrekt festgelegt. WEP-Einstellungen prüfen. Der Netzwerkschlüssel (WEP-Schlüssel) eines Wireless LAN-Routers, zu dem eine Verbindung hergestellt werden soll, ist im Gerät nicht richtig konfiguriert. Prüfen Sie den Netzwerkschlüssel (WEP-Schlüssel) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät.
0W5F-0C2 Wenn ein Fehlercode erscheint Wenn das Drucken nicht funktioniert, Sie kein Fax oder gescanntes Dokument senden oder empfangen können oder ein anderer Fehler auftritt, wird dieser Fehler als dreistellige Zahl (Fehlercode) in einem Bericht gedruckt oder in einer Meldung auf dem Bildschirm angezeigt. Lesen Sie im Folgenden die möglichen Ursachen und Abhilfemaßnahmen zu den einzelnen Fehlercodes nach.
#018 Ein Fax konnte nicht gesendet werden, da das Gerät des Empfängers nicht antwortete, weil beispielsweise die Leitung belegt war. Wenn das Gerät des Empfängers ausgeschaltet oder die Leitung belegt ist, kann das Fax nicht gesendet werden. Bitten Sie den Empfänger, den Gerätestatus zu prüfen. Wenn Sie das Fax an eine Nummer im Ausland senden, fügen Sie Pausen in die Faxnummer ein. Senden von Faxen (MF729Cx / MF728Cdw / MF628Cw) #022 Das Senden von Faxen von einem Computer ist deaktiviert.
Löschen Sie nicht benötigte Daten, um Platz auf dem USB-Speichergerät freizugeben, oder schließen Sie ein anderes USB-Speichergerät an. Direktes Speichern gescannter Dokumente auf einem USB-Speicher #406 Aufgrund eines Fehlers konnte ein gescanntes Dokument nicht auf einem USB-Speichergerät gespeichert werden. Trennen Sie das USB-Speichergerät von diesem Gerät, und schließen Sie es wieder an.
Löschen Sie die Dokumente im Speicher. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. #751 Der Server wurde nicht gestartet, oder eine Netzwerkverbindung wurde getrennt. (Ein Fehlschlagen beim Herstellen der Verbindung zum Empfänger wird manchmal durch eine getrennte Verbindung auf dem Übertragungsweg verursacht.) Überprüfen Sie den Empfänger. Überprüfen Sie den Netzwerkstatus.
Netzwerkeinstellungen Es ist keine IP-Adresse eingestellt. Stellen Sie die IP-Adresse richtig ein. Einstellen von IP-Adressen Das Gerät kann nicht unmittelbar nach dem Einschalten mit Geräten in einem Netzwerk kommunizieren, weil eine Wartezeit für den Beginn der Kommunikation eingestellt ist. Das Gerät kann nicht unmittelbar nach dem Einschalten die Kommunikation starten.
#804 Es werden keine Zugriffsrechte für den gemeinsamen Ordner gewährt. Prüfen Sie, ob die Angaben für Anwendername und Passwort, die für den Empfänger gespeichert sind, mit dem für den gemeinsamen Ordner gespeicherten Anwenderkonto (Anwendername und Passwort) übereinstimmen. Weitere Informationen zu gemeinsamen Ordnern finden Sie im Handbuch der Sendeeinstellungen (auf der mitgelieferten DVDFestlegen eines ROM enthalten).
#813 Der Anmeldename für die POP-Authentisierung ist nicht richtig eingestellt. Geben Sie den Anmeldenamen für die POP-Authentisierung richtig ein. #818 Die empfangenen Daten weisen ein Dateiformat auf, das vom Gerät nicht gedruckt werden kann. Wenden Sie sich an den Absender, und bitten Sie ihn, die Daten in einem anderen Dateiformat erneut zu senden. #819 Die empfangenen Daten werden nicht unterstützt (falsche MIME-Informationen).
#827 Die empfangenen Daten werden nicht unterstützt (sie enthalten nicht unterstützte MIME-Informationen). Wenden Sie sich an den Absender, und bitten Sie ihn, die Einstellungen zu überprüfen und die Daten dann erneut zu senden. #829 Die empfangenen Daten sind mindestens 1.000 Seiten lang. Das Gerät löscht die Daten ab Seite 1.000 und druckt die ersten 999 Seiten oder behält sie im Speicher. Bitten Sie den Absender, die Daten ab Seite 1.000 erneut zu senden.
#846 Aufgrund eines POP-Authentisierungsfehlers konnte eine E-Mail nicht gesendet werden. Prüfen Sie die Einstellung, und versuchen Sie es erneut. Konfigurieren von Einstellungen für die E-Mail-/I-Fax-Kommunikation #852 Das Gerät schaltet sich aus irgendeinem Grund AUS. Prüfen Sie, ob der Netzstecker fest an eine Netzsteckdose angeschlossen ist. #853 Ein Dokument konnte nicht gedruckt werden, da die Verarbeitungskapazität des Geräts für die Datenmenge nicht ausreichte.
Drucken von Dokumenten Ein Dokument konnte aufgrund von beschädigten Daten nicht gedruckt werden. Prüfen Sie, ob die Dokumentdaten beschädigt sind. #863 Beim Drucken von einem Computer ist ein Fehler aufgetreten. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Versuchen Sie nach dem Neustart erneut zu drucken. #995 Ein Dokument in der Sendewarteschlange wurde verworfen. Senden Sie das Dokument gegebenenfalls erneut.
0W5F-0C3 Allgemeine Probleme Wenn beim Betrieb des Geräts Probleme auftreten, prüfen Sie die Punkte in diesem Abschnitt, bevor Sie uns kontaktieren. Wenn die Probleme bestehen bleiben, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support.
0W5F-0C4 Probleme mit Installation/Einstellungen Siehe auch Allgemeine Probleme. Symbole in der Beschreibung Problem mit der Wireless LAN-Verbindung Problem mit der Wired LAN-Verbindung Problem mit der USB-Verbindung Das Gerät kann nicht gleichzeitig über ein Wireless LAN, ein verkabeltes LAN und ein USB-Kabel mit einem Computer verbunden sein. Sie können nicht alle drei Verbindungstypen gleichzeitig verwenden.
* Ein Modus, der die automatische SSID-Erkennung anderer Geräte deaktiviert. Prüfen Sie, ob das Gerät ordnungsgemäß installiert und für eine Verbindung mit dem Netzwerk bereit ist. Wenn das Gerät keine Verbindung zum Wireless LAN herstellen kann Das Gerät wählt eine Verbindung zu einem nicht beabsichtigten Empfänger an (wenn das Netzwerk mit einem Dial-upRouter verbunden ist).
Wenn Sie die Verbindung manuell einrichten müssen Wenn der Wireless LAN-Router wie unten beschrieben konfiguriert ist, geben Sie manuell alle erforderlichen Informationen für die Wireless LAN-Verbindung ein ( Konfiguration der Verbindung durch Festlegen detaillierter Einstellungen). ANY-Verbindungsablehnung* ist aktiviert. Der WEP-Schlüssel, der automatisch generiert wurde (hexadezimal), ist ausgewählt.
0W5F-0C5 Probleme beim Kopieren Siehe auch Allgemeine Probleme. Die Druckergebnisse sind nicht zufriedenstellend. Das Papier wellt sich oder weist Falten auf.
0W5F-0C6 Probleme beim Drucken Siehe auch Allgemeine Probleme. Die Druckergebnisse sind nicht zufriedenstellend. Das Papier wellt sich oder weist Falten auf. Wenn Sie nicht ordnungsgemäß drucken können Sie können nicht drucken. Lesen Sie im Installationshandbuch für den MF-Treiber nach, und vergewissern Sie sich, dass der Druckertreiber auf dem Computer korrekt installiert wurde. Das Drucken scheint lange zu dauern. * Drucken oder löschen Sie Daten im Speicher.
0W5F-0C7 Probleme beim Faxen/Telefonieren Siehe auch Allgemeine Probleme. Probleme beim Senden Sie können ein Fax nicht senden. Ist die externe Telefonleitung belegt? Warten Sie, bis die Leitung frei ist. Ist ein Fehler aufgetreten? Drucken Sie einen Kommunikationsverwaltungsbericht, und prüfen Sie ihn.
0W5F-0C8 Wenn Sie nicht ordnungsgemäß drucken können Wenn die Druckergebnisse nicht zufriedenstellend sind oder sich das Papier wellt oder Falten aufweist, probieren Sie die folgenden Abhilfemaßnahmen aus. Wenn die Probleme bestehen bleiben, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support.
0W5F-0C9 Die Druckergebnisse sind nicht zufriedenstellend Verschmutzungen im Gerät können die Druckergebnisse beeinträchtigen. Pflegen und reinigen Sie zunächst das Gerät. Reinigen des Geräts Am unteren Rand von Ausdrucken erscheinen Flecken Verwenden Sie geeignetes Papier? Prüfen Sie, welche Papiertypen unterstützt werden, und tauschen Sie den verwendeten Papiertyp gegebenenfalls aus.
Tonerflecken und -spritzer Verwenden Sie geeignetes Papier? Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Papier Einlegen von Papier Sind die Tonerpatronen verbraucht? Prüfen Sie, wie viel Toner in den Tonerpatronen verblieben ist, und tauschen Sie die Tonerpatronen gegebenenfalls aus.
Dieses Symptom tritt auf, wenn im Druckertreiber kein Rand eingestellt ist. Ränder von 5 mm oder weniger an den Papierkanten bzw. von 10 mm oder weniger an Briefumschlagskanten können mit diesem Gerät nicht gedruckt werden. Vergewissern Sie sich, das Dokument mit Rändern zu drucken.
0W5F-0CA Das Papier weist Falten auf oder wellt sich Papier weist Falten auf Ist das Papier richtig eingelegt? Wenn das eingelegte Papier über die Füllhöhenmarkierung hinausragt oder schräg eingelegt ist, können sich Falten bilden. Einlegen von Papier Verwenden Sie feuchtes Papier? Tauschen Sie das Papier gegen geeignetes Papier aus. Einlegen von Papier Verwenden Sie geeignetes Papier? Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus.
0W5F-0CC Papier wird nicht richtig eingezogen Ausdrucke sind schräg Sind die Papierführungen an den Papierkanten ausgerichtet? Wenn die Papierführungen zu lose oder zu eng eingestellt sind, kommt es zu schrägen Ausdrucken. Einlegen von Papier Ist die manuelle Zufuhr die Papierzufuhr? Legen Sie das Papier in die Papierkassette ein. Einlegen von Papier in die Papierkassette Drucken Sie auf gewellte Briefumschläge? Glätten Sie die Briefumschläge, und drucken Sie erneut.
0W5F-0CE Wenn sich ein Problem nicht beheben lässt Wenn Sie ein Problem anhand der Informationen in diesem Kapitel nicht beheben können, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support. Zerlegen Sie das Gerät nicht, und reparieren Sie es nicht selbst Wenn Sie das Gerät zerlegen oder selbst reparieren, erlischt unter Umständen die Garantie.
0W5F-0CF Wartung In diesem Kapitel werden Wartung und Reinigung des Geräts sowie das Initialisieren von Einstellungen beschrieben. Grundlegende Reinigungsaufgaben Reinigen des Geräts Wenn das Gerät verschmutzt ist, lesen Sie unter Gehäuse nach. Wenn auf Originalen oder Ausdrucken Flecken zu sehen sind, lesen Sie unter nach. Wenn auf Ausdrucken Streifen zu sehen sind, lesen Sie unter Wenn die Druckqualität verringert ist, lesen Sie unter Vorlagenglas oder Zufuhr Fixiereinheit nach.
0W5F-0CH Reinigen des Geräts Reinigen Sie das Gerät regelmäßig, damit sich die Druckqualität nicht verschlechtert und damit Sie es sicher und problemlos verwenden Wartung und Überprüfung können. Lesen Sie die Sicherheitshinweise, bevor Sie mit dem Reinigen beginnen.
0W5F-0CJ Gehäuse Wischen Sie das Gehäuse des Geräts und insbesondere den Bereich um die Lüftungsschlitze regelmäßig ab, damit das Gerät in einwandfreiem Zustand bleibt. 1 Schalten Sie das Gerät AUS, und trennen Sie das Netzkabel von der Netzsteckdose. Wenn Sie das Gerät ausschalten, werden die Daten, die auf den Druck warten, gelöscht.
0W5F-0CK Vorlagenglas Reinigen Sie das Vorlagenglas und die Unterseite der Zufuhr regelmäßig von Staub, damit sich auf den Dokumenten und den Ausdrucken keine Flecken bilden. 1 Schalten Sie das Gerät AUS, und trennen Sie das Netzkabel von der Netzsteckdose. Wenn Sie das Gerät ausschalten, werden die Daten, die auf den Druck warten, gelöscht.
0W5F-0CL Zufuhr Grafitpulver oder Staub an der Rolle in der Zufuhr können Flecken auf den Ausdrucken verursachen. Reinigen Sie in diesem Fall die Zufuhr. Wenn auch nach der Reinigung der Zufuhr weiterhin Flecken auftreten, führen Sie die automatische Zufuhrreinigung durch. Reinigen der Zufuhr Automatische Zufuhrreinigung Reinigen der Zufuhr 1 Schalten Sie das Gerät aus, und trennen Sie es von der Netzsteckdose. Beim Ausschalten des Geräts werden alle Druckdaten in der Warteschlange gelöscht.
4 Tippen Sie auf . Die Reinigung beginnt. Wenn etwa 1 Minute später die Meldung angezeigt wird, schalten Sie mit zurück.
0W5F-0CR Fixiereinheit Schmutz kann an der Fixiereinheit im Gerät haften und schwarze Streifen auf Ausdrucken verursachen. Reinigen Sie die Fixiereinheit wie im Folgenden beschrieben. Beachten Sie, dass die Fixiereinheit nicht gereinigt werden kann, wenn sich Dokumente in der Druckwarteschlange befinden. Zum Reinigen der Fixiereinheit benötigen Sie normales A4- oder Letter-Papier.
0W5F-0CS Transferriemen Schmutz kann am Transferriemen im Gerät haften und eine Verschlechterung der Druckqualität verursachen. Reinigen Sie den Transferriemen wie im Folgenden beschrieben. Beachten Sie, dass der Transferriemen nicht gereinigt werden kann, wenn sich Dokumente in der Druckwarteschlange befinden. 1 2 3 4 Drücken Sie , und tippen Sie auf . Tippen Sie auf . Tippen Sie auf . Tippen Sie auf . Die Reinigung beginnt.
0W5F-0CU Austauschen von Tonerpatronen Am Gerät wird eine Meldung angezeigt, wenn der in der Tonerpatrone verbliebene Toner zur Neige geht. Beachten Sie, dass möglicherweise die Druckqualität leidet, wenn Sie den Druck fortsetzen, ohne dieses Problem zu beheben. Sie können die in den Tonerpatronen verbliebene Tonermenge auf dem Display überprüfen.
Sie können in Schwarzweiß drucken, auch wenn die Tonerpatrone für Gelb, Magenta oder Cyan das Ende der Lebensdauer erreicht hat. Wenn die Ausdrucke von schlechter Qualität sind Wenn auf den Ausdrucken folgende Probleme auftreten, ist eine der Tonerpatronen verbraucht. Tauschen Sie die fast leere Tonerpatrone aus, auch wenn keine Meldung angezeigt wird.
0W5F-0CW So tauschen Sie Tonerpatronen aus Lesen Sie vor dem Austauschen von Tonerpatronen die Sicherheitshinweise in Verbrauchsmaterial. 1 Öffnen Sie die vordere Abdeckung. 2 Ziehen Sie das Patronenfach heraus. MF729Cx / MF728Cdw / MF724Cdw MF628Cw / MF623Cn 3 Ziehen Sie die Tonerpatrone gerade nach oben aus dem Gerät. 4 Nehmen Sie die Ersatzpatrone aus der Schutzhülle.
Beim Herausziehen des Schutzstreifens Wenn der Schutzstreifen in der Tonerpatrone bleibt, kann sich die Ausdruckqualität verschlechtern, und zwar auch bei Faxen. Beachten Sie, dass der erneute Ausdruck eines Faxes nicht möglich ist, weil die Faxfunktion die Daten nach dem Ausdruck löscht. Ziehen Sie den Schutzstreifen nicht schräg oder zur Seite heraus. Wenn der Schutzstreifen reißt, können Sie ihn unter Umständen nicht vollständig herausziehen.
0W5F-0CX Transport des Geräts Das Gerät ist schwer. Befolgen Sie unbedingt die folgenden Anweisungen, um beim Transport des Geräts Verletzungen zu vermeiden, Wichtige Sicherheitsvorschriften und lesen Sie vorher unbedingt die Sicherheitshinweise. 1 Schalten Sie das Gerät und den Computer AUS. Wenn Sie das Gerät ausschalten, werden die Daten, die auf den Druck warten, gelöscht.
MF628Cw / MF623Cn 6 Stellen Sie das Gerät vorsichtig am neuen Aufstellort ab. Informationen zum Aufstellen des Geräts nach dem Transport finden Sie im Handbuch Erste Schritte.
0W5F-0CY Aufrechterhalten und Verbessern der Druckqualität Wenn die Druckergebnisse nicht zufriedenstellend sind und zum Beispiel die Bildqualität schlecht ist, eine schlechte Reproduzierbarkeit vorliegt oder die Farben nicht übereinstimmen, führen Sie zum Test die unten aufgeführten Anpassungen durch. Gradation automatisch justieren Wenn die Ausdrucke in Dichte und Helligkeit deutlich von den Originalen abweichen, führen Sie aus, um die Farbreproduktion zu verbessern.
0W5F-0E0 Korrektur der Gradation Als Gradation bezeichnet man die Abstufungen zwischen dunklen und hellen Tönen einer Farbe. Je mehr Farbabstufungen gedruckt werden, desto natürlicher erscheinen die Ausdrucke. Wenn die Farbreproduktion unzureichend ist und die Ausdrucke in Dichte und Helligkeit deutlich von den Originalen abweichen, führen Sie die geeignete Funktion zur automatischen Justage aus.
7 Legen Sie das Bild für die Justage mit der bedruckten Seite nach unten auf das Vorlagenglas. Legen Sie das Bild für die Justage so auf, dass der schwarze Streifen auf die Rückseite des Geräts weist. 8 9 Schließen Sie die Zufuhr vorsichtig. Drücken Sie (Farbe). Das Bild für die Justage wird gescannt, und die Justage beginnt. Nach etwa 30 Sekunden wird ein zweites Bild für die Justage gedruckt.
Transferriemen Schnell justieren Mit dieser Justagefunktion lässt sich der mit hergestellte optimierte Zustand aufrechterhalten. Beachten Sie, dass Sie diese Funktion nicht durchführen können, wenn gerade bestimmte andere Funktionen wie das Scannen und Drucken ausgeführt werden. Wenn das Ergebnis dieser Justagefunktion nicht zufriedenstellend ist, führen Sie aus. Diese Justagefunktion wird nach dem Austauschen einer Tonerpatrone unter Umständen automatisch ausgeführt.
5 Bestätigen Sie den Vorgang, und tippen Sie auf . Die Justage beginnt. Nach etwa 1 Minute wird ein Bild für die Justage gedruckt. 6 7 Öffnen Sie die Zufuhr, sobald der während des Druckens angezeigte Bildschirm ausgeblendet wird. Legen Sie das Bild für die Justage mit der bedruckten Seite nach unten auf das Vorlagenglas. Legen Sie das Bild für die Justage so auf, dass der schwarze Streifen auf die Rückseite des Geräts weist. 8 9 Schließen Sie die Zufuhr vorsichtig. Drücken Sie (Farbe).
0W5F-0E1 Korrektur von Druck-Farbverzerrungen Druck-Farbverzerrungen treten auf, wenn beim Drucken eines Bilds mit mehreren Tonerpatronen die Positionen der Farben nicht präzise aufeinander abgestimmt sind. In diesem Fall erscheinen die Ausdrucke verschwommen. Führen Sie die folgenden Schritte aus, wenn es zu Druck-Farbverzerrungen kommt. Diese Justagefunktion wird in bestimmten Fällen automatisch durchgeführt, unter anderem nach dem Austauschen von Tonerpatronen.
0W5F-0E2 Justieren der Werte für die Textfarbenreproduzierbarkeit in Farbdokumenten Wenn die Kopierergebnisse von schwarzem oder schwärzlichem Text nicht zufriedenstellend sind, können Sie die Farbreproduzierbarkeit mit dieser Anpassung verbessern. Dieser Anpassungswert kann für die Zufuhr und das Vorlagenglas getrennt eingestellt werden. Die Einstellungen werden auf Farbkopien angewendet, wenn auf oder gesetzt ist ( Auswählen von Dokumententypen).
0W5F-0E3 Drucken von Berichten und Listen Anhand gedruckter Berichte und Listen können Sie Faxergebnisse und die Geräteeinstellungen prüfen. SE Ergebnisbericht Sie können die Logs zu gesendeten Dokumenten drucken. SE Ergebnisbericht Bericht Kommunikationsverwaltung Sie können die Logs zu gesendeten und empfangenen Dokumenten drucken. Bericht Kommunikationsverwaltung EM Ergebnisbericht Sie können die Logs zu empfangenen Faxdokumenten drucken.
0W5F-0E4 SE Ergebnisbericht Sie können die Fax- oder E-Mail-/I-Fax-Logs für gesendete Dokumente sowie für nach dem Scannen in einem gemeinsamen Ordner oder auf einem FTP-Server gespeicherte Dokumente in einem SE-Ergebnisbericht drucken. Sie können den Bericht nach jeder Übertragung oder nur bei Sendefehlern drucken.
gedruckt. Um den Fehlercode zu überprüfen, drucken Sie einen Kommunikationsverwaltungsbericht ( Kommunikationsverwaltung ). Bericht So drucken Sie einen Teil des Faxdokuments im Bericht Wenn Sie oder auswählen, kann ein Teil des Faxdokuments in den Bericht eingefügt werden. Setzen Sie auf .
0W5F-0E5 Bericht Kommunikationsverwaltung Sie können die Fax- oder E-Mail-Logs für gesendete und empfangene Dokumente in einem Kommunikationsverwaltungsbericht drucken. Sie können den Bericht nach jeweils 40 Übertragungen oder manuell drucken.
0W5F-0E6 EM Ergebnisbericht Sie können die Logs für empfangene Fax- und I-Faxdokumente in einem EM-Ergebnisbericht drucken. Sie können den Bericht nach jeder Übertragung oder nur bei Empfangsfehlern drucken. Wählen Sie die Druckeinstellung Wählen Sie diese Einstellung, wenn keine EM-Ergebnisberichte gedruckt werden sollen.
0W5F-0E7 Bericht Verwaltung Abteilungs-ID Wenn die Verwaltung per Abteilungs-IDs aktiviert ist, können Sie die Gesamtzahl der Ausdrucke für jede in einem Bericht zur Verwaltung per Abteilungs-IDs drucken. Indem Sie die Gesamtzahl der Ausdrucke prüfen, können Sie die Papier- und Tonerpatronenvorräte besser verwalten.
0W5F-0E8 Adressbuchliste Sie können eine Liste der unter , und im Adressbuch gespeicherten Empfänger drucken.
0W5F-0E9 Anwenderdatenliste/Datenliste Systemmanager Sie können eine Liste der Einstellungen ( Liste der Menüeinstellungen) sowie die im Gerät gespeicherten Einstellungen in einer Anwender- oder Systemmanagerdatenliste drucken. Beide Listen enthalten das im Gerät gespeicherte Papierformat und den Papiertyp sowie die Druckeinstellungen von , und .
0W5F-0EA Liste IPSec Richtlinie Sie können eine Liste der Richtliniennamen und die im Gerät gespeicherten IPSec-Einstellungen in einer IPSec-Richtlinienliste drucken.
0W5F-0EC Statusbericht für Verbrauchsmaterial Sie können den Status des im Gerät installierten Verbrauchsmaterials überprüfen.
0W5F-0EE Fontliste PCL Sie können eine Liste zur Überprüfung der im PCL-Modus verfügbaren Schriftarten drucken.
0W5F-0EF Fontliste PS Sie können eine Liste zur Überprüfung der im PS-Modus verfügbaren Schriftarten drucken.
0W5F-0EH Anzeigen des Zählerwerts Sie können die Gesamtzahl der für Farb- bzw. Schwarzweißausdrucke verwendeten Seiten prüfen. In diesen Gesamtzahlen sind über Computer erstellte Kopien und Ausdrucke sowie Faxe, Berichte und Listen inbegriffen. MF729Cx ( ) Wählen Sie die zu überprüfende Option Überprüfen Sie die Anzahl der gedruckten Seiten Zähler Wählen Sie den Zähler zur Überprüfung des Zählerwertes aus.
0W5F-0EJ Verwenden eines USB-Speichergeräts zum Exportieren/Importieren von gespeicherten Daten Daten wie Adressbucheinträge und Geräteeinstellungen können exportiert und auf einem USB-Speichergerät gespeichert werden. Sie können die auf einem USB-Speichergerät gespeicherten Daten auch importieren. Da die vom Gerät exportierten Daten in andere Modelle importiert werden können, haben Sie die Möglichkeit, Daten wie Adressbucheinträge einfach auf mehrere Geräte zu kopieren * .
0W5F-0EK Exportieren von gespeicherten Daten auf ein USB-Speichergerät Daten wie die Adressbucheinträge und die Geräteeinstellungen können exportiert und auf einem USB-Speichergerät gespeichert werden. Es wird empfohlen, wichtige Einstellungen regelmäßig zu sichern. 1 Schließen Sie ein USB-Speichergerät an den USB-Anschluss (USB2.0) an. Der USB-Anschluss an der rechten Seite des Geräts in Richtung Rückseite steht nicht zur Verfügung.
7 Trennen Sie das USB-Speichergerät vom USB-Anschluss (USB2.0). 1 Drücken Sie . 2 Drücken Sie . 3 Tippen Sie auf . 4 Tippen Sie auf . Warten Sie, bis die Meldung angezeigt wird. 5 Trennen Sie das USB-Speichergerät vom Gerät.
0W5F-0EL Importieren von gespeicherten Daten von einem USB-Speichergerät Gehen Sie folgendermaßen vor, um die vom Gerät auf ein USB-Speichergerät exportierten Daten zu importieren. Wenn die Modelle identisch sind, können Sie die Einstellungen auch von einem anderen Gerät in dieses Gerät importieren. Beim Importieren der Adressbuchdaten werden die derzeit im Gerät gespeicherten Adressbucheinträge überschrieben. 1 Schließen Sie ein USB-Speichergerät an den USB-Anschluss (USB2.0) an.
7 Trennen Sie das USB-Speichergerät vom USB-Anschluss (USB2.0). 1 Drücken Sie . 2 Drücken Sie . 3 Tippen Sie auf . 4 Tippen Sie auf . Warten Sie, bis die Meldung angezeigt wird. 5 Trennen Sie das USB-Speichergerät vom Gerät.
0W5F-0ER Initialisieren von Einstellungen Sie können die folgenden Einstellungen zurücksetzen: Initialisieren des Menüs Initialisieren von Schlüsseln und Zertifikaten Initialisieren des Adressbuchs 㻢㻤㻟㻌㻛㻌㻣㻠㻠
0W5F-0ES Initialisieren des Menüs Sie können die Einstellungen des Geräts auf die werkseitigen Standardwerte zurücksetzen ( Liste der Menüeinstellungen). Abhängig von den ausgewählten Einstellungen müssen Sie das Gerät nach der Initialisierung möglicherweise neu starten. Starten Sie das Gerät ggf. neu Wählen Sie die zu initialisierende Option Optionen, die initialisiert werden können Wählen Sie die Einstellung, die Sie initialisieren wollen.
Sie können folgendermaßen vorgehen, um den Standardwert wiederherzustellen . Wählen Sie , und starten Sie dann das Gerät neu. Initialisiert alle Einstellungen im Gerät.
0W5F-0EU Initialisieren von Schlüsseln und Zertifikaten Sie können die Einstellungen für Schlüsselpaare und digitale Zertifikate auf die werkseitigen Standardwerte zurücksetzen. Beachten Sie, dass alle im Gerät registrierten Schlüsselpaare und Zertifikate (mit Ausnahme der vorinstallierten digitalen Zertifikate) beim Initialisieren gelöscht werden.
0W5F-0EW Initialisieren des Adressbuchs Sie können die Einstellungen für das Adressbuch auf die werkseitigen Standardwerte zurücksetzen. Beachten Sie, dass alle im Adressbuch gespeicherten Informationen beim Initialisieren gelöscht werden.
0W5F-0EX Anhang Dieses Kapitel enthält technische Daten dieses Geräts, Anweisungen zur Verwendung der e-Anleitung, Haftungsausschluss, CopyrightInformationen und andere wichtige Informationen für die Kunden.
0W5F-0EY Praktische Funktionen Probieren Sie die in diesem Abschnitt beschriebenen Funktionen einfach einmal aus. Die Funktionen sind unter vier Überschriften zusammengefasst: "Umweltfreundlich Geld sparen", "Effizienzfunktionen", "Digitalisieren" und "Weitere Funktionen.
0W5F-0F0 Umweltfreundlich Geld sparen Doppelseitiger Druck (MF729Cx / MF728Cdw / MF724Cdw) Den doppelseitigen Druck können Sie für Kopien, von einem Computer gesendete Druckaufträge und sogar eingehende Faxe verwenden. Da sich dabei der Papierverbrauch im Vergleich zum einseitigen Druck halbiert, sparen Sie die Hälfte der Papierkosten. Wenn Sie noch mehr Papier sparen wollen, kombinieren Sie den doppelseitigen Druck mit dem Druck N auf 1, bei dem mehrere Seiten auf einem Blatt Papier gedruckt werden.
Weitere Informationen über diese Funktion finden Sie in Wechseln in den Schlafmodus. Einsparen von Toner Sie möchten mehrseitige Dokumente oder Entwürfe drucken, für die keine optimale Qualität erforderlich ist? Es gibt eine Einstellung, bei der weniger Toner verwendet wird. Damit erzielen Sie eine ausreichende Qualität und sparen gleichzeitig Toner und Geld. Weitere Informationen über diese Funktion finden Sie in Sparen von Toner.
0W5F-0F1 Effizienzfunktionen Adressbuch Wenn Sie Fax- und E-Mail-Adressen in das Adressbuch eingeben, sparen Sie sich die Mühe, bei jedem Sendevorgang die Ziffern und Buchstaben einzeln einzugeben. Mit der Funktion können Sie häufig verwendete Adressen schnell anzeigen und Dokumente problemlos an die gewünschten Empfänger senden. Sie können die Adressbuchdaten auf einem Computer speichern und so eine Sicherungskopie wichtiger Kontaktdaten anlegen.
Wenn Sie einen USB-Stick an das Gerät anschließen, können Sie Bilder und Dokumente direkt ohne Computer drucken. Sie können sogar eine Vorschau von JPEG-Bildern und anderen Bildern vor dem Drucken anzeigen, sodass Sie kein Papier verschwenden müssen. Sie können auch handgeschriebene Memos usw. scannen und direkt auf einem USB-Stick speichern. So können Sie sie bequem bei sich tragen.
0W5F-0F2 Digitalisieren Scannen und Senden per E-Mail Senden Sie gescannte Dokumente per E-Mail, ohne den Computer überhaupt einzuschalten. Konvertieren Sie gescannte Dokumente einfach direkt am Gerät in E-Mail-Anhänge. Das ist die perfekte Funktion für alle, die keine Zeit mit dem Computer verschwenden möchten. Weitere Informationen über diese Funktion finden Sie in Gerät .
Bilder, die Sie mit diesem Gerät gescannt, gedruckt oder anderweitig reproduziert haben, verwenden dürfen, holen Sie vorab rechtlichen Rat ein. Weitere Informationen über diese Funktion finden Sie in Konfigurieren von Scaneinstellungen in ScanGear MF. Durchsuchbare PDFs Die Suche nach Text in einer PDF-Datei kann mithilfe einer "durchsuchbaren PDF-Datei" durchgeführt werden. Indem Sie ein Original mit Text und Bildern scannen, werden die Textteile von OCR in Textdaten konvertiert.
0W5F-0F3 Weitere Funktionen Verwenden eines Smartphones/Tablets Wenn Sie z. B. einmal schnell einen Vorschlag ausdrucken wollen, den Sie auf dem Weg zu einem Geschäftstermin auf einem Tablet fertiggestellt haben, oder das bei einer Besprechung ausgeteilte Material mit einem Smartphone scannen wollen, ist die Canon Mobilanwendung besonders hilfreich. Auch an Orten ohne Wireless LAN-Router können Sie mit einem Mobilgerät direkt und kabellos eine Verbindung zum Gerät herstellen.
Weitere Informationen über diese Funktion finden Sie in Drucken eines mit einer PIN geschützten Dokuments (Geschützter Druck) (MF729Cx / MF728Cdw / MF724Cdw). Drahtlose Verbindung (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw) Keine Kabel, einfache Installation, problemlose Wartung. Mit einem WPS-fähigen Wireless LAN-Router entfällt die Einstellung komplett, und das Gerät ist im Handumdrehen betriebsbereit.
Manche Dokumente erfordern mehr als nur eine Heftklammer oben links. Broschüren lassen sich wirklich einfach erstellen, denn der Druckertreiber sorgt für die richtige Positionierung auf der Seite. Sie brauchen nur noch die Seiten zu falten und in der Mitte zu heften. Weitere Informationen über diese Funktion finden Sie in MF724Cdw).
0W5F-0F4 Technische Daten Änderungen an den technischen Daten des Geräts aufgrund von Verbesserungen bleiben vorbehalten.
0W5F-0F5 Technische Daten des Geräts MF729Cx / MF728Cdw / MF724Cdw Typ Tischgerät Stromversorgung *1 220 bis 240 V, 50/60 Hz (Die Anforderungen bezüglich der Stromversorgung hängen von dem Land ab, in dem Sie das Gerät erworben haben.) Maximum 1.200 W oder weniger Durchschnitt im Standby-Modus ca. 25 W Leistungsaufnahme Durchschnitt im Schlafmodus ca. 1 W Durchschnitt im Schlafmodus (bei drahtlosen Verbindungen) ca.
MF628Cw / MF623Cn Typ Tischgerät Stromversorgung *1 220 bis 240 V, 50/60 Hz (Die Anforderungen bezüglich der Stromversorgung hängen von dem Land ab, in dem Sie das Gerät erworben haben.) Maximum 900 W oder weniger Durchschnitt im Standby-Modus ca. 20 W Leistungsaufnahme Durchschnitt im Schlafmodus ca. 1 W Durchschnitt im Schlafmodus (bei drahtlosen Verbindungen) ca.
*4 Nur beim Modell MF628Cw. *5 Gibt an, dass der Schalldruckpegel an jeder Bedienposition unter den absoluten Kriterien gemäß ISO 7779 für den Hintergrundgeräuschpegel liegt.
0W5F-0F6 Technische Daten des WLAN-Moduls Standard IEEE 802.11g, IEEE 802.11b, IEEE 802.11n Übertragungsverfahren DS-SS-System, OFDM-System Frequenzbereich 2.412 bis 2.
0W5F-0F7 Dokumententypen Unterstützte Dokumententypen Vorlagenglas Zufuhr Typ Normalpapier/Schweres Papier/Fotografien/Kleinformatige Dokumente (z. B. Karteikarten)/Spezialpapier (z. B. Transparentpapier, Folien usw.
0W5F-0F8 Scanbereich Die schattierten Bereiche in der Tabelle unten zeigen den Scanbereich des Dokuments. Stellen Sie sicher, dass Text und Bilder in Ihren Dokumenten in den schattierten Bereich passen. Der Scanbereich variiert abhängig von der verwendeten Funktion und wo die Dokumente platziert wurden (in der Zufuhr oder auf dem Vorlagenglas). Vorlagenglas Zufuhr Kopie Der Scanbereich für das Kopieren kann sich vom bedruckbaren Bereich unterscheiden.
0W5F-0F9 Papier Unterstützte Papierformate Im Folgenden sind die Papierformate aufgelistet, die in die Papierkassette, die manuelle Zufuhr und die optionalen Papierkassetten eingelegt werden können.
Government - Legal (203,2 x 330,2 mm) Foolscap (215,9 x 330,2 mm) AFLS (206 x 337 mm) ind-LGL (215 x 345 mm) Briefumschlag COM10 (104,7 x 241,3 mm) Briefumschlag Monarch (98,4 x 190,5 mm) Briefumschlag C5 (162 x 229 mm) Briefumschlag DL (110 x 220 mm) Karteikarte (76,2 x 127 mm) *2 Anwenderdefiniertes Papierformat *3 *1 Das Gerät kann empfangene Faxdokumente ausdrucken. *2 Sie können Karteikarten nur in die manuelle Zufuhr einlegen.
Papiertyp Papierkapazität der Papierkassette Papierkapazität der manuellen Zufuhr 60 bis 90 g/m² 150 Blatt 1 Blatt 85 bis 120 g/m² 120 Blatt 1 Blatt 121 bis 163 g/m² 100 Blatt 1 Blatt Recyclingpapier 60 bis 74 g/m² 150 Blatt 1 Blatt Farbiges Papier 60 bis 74 g/m² 150 Blatt 1 Blatt Normalpapier Schweres Papier 100 bis 110 g/m² 111 bis 130 g/m² Beschichtetes Papier 100 Blatt 1 Blatt 131 bis 160 g/m² 161 bis 220 g/m² Dünnes Papier 60 g/m² 150 Blatt 1 Blatt Folien *1 50 Blatt 1 Bla
0W5F-0FA Technische Daten der Kopierfunktion Text/Foto/Karte (Geschwindigkeit) (Farbe) 300 x 300 dpi Scanauflösung Text/Foto/Karte, Text/Foto/Karte (Geschwindigkeit) (SW) 300 x 600 dpi Text/Foto/Karte (Qualität), Druckbild, Text 600 x 600 dpi Ausgabeauflösung 600 x 600 dpi Kopierfaktor 100% 1:1, 400% Max, 200%, 141% A5->A4, 70% A4->A5, 50%, 25% Min.
0W5F-0FC Technische Daten der Faxfunktion Verwendete Leitung Festnetz (PSTN) *1 Kommunikationsmodus Super G3, G3 Komprimierungsmethode MH, MR, MMR, JBIG Modemgeschwindigkeit Super G3: 33,6 Kbit/s, G3: 14,4 Kbit/s Automatische Reduzierung Übertragungsgeschwindigkeit ca. 3 Sekunden pro Seite *2 (ECM-JBIG, Übertragung aus dem Speicher mit 33,6 Kbit/s) Senden aus Speicher/Empfang im Speicher maximal ca.
0W5F-0FE Technische Daten der Scanfunktion Typ Farbscanner Maximales Scanformat Vorlagenglas: maximal 216 x 297 mm Zufuhr: maximal 216 x 356 mm Scanauflösung Optische Auflösung Vorlagenglas: maximal 600 x 600 dpi Zufuhr: maximal 300 x 300 dpi Auflösung mit Softwareinterpolation 9.600 x 9.600 dpi Scangeschwindigkeit*1 (A4, 300 x 600 dpi) Treiber Farbe: 10 Blatt/Minute Schwarzweiß: 20 Blatt/Minute TWAIN WIA 2.0 (Windows Vista/7/8) ICA (Mac OS X 10.6.x oder höher) *1 Ohne Kommunikationsdauer.
0W5F-0FF Technische Daten der Druckfunktion Druckmethode Indirektes elektrostatisches System (Fixierung bei Bedarf) Papierkapazität MF729Cx / MF728Cdw / MF724Cdw Manuelle Zufuhr: ca. 50 Blatt (60 bis 90 g/m²) Papierkassette: ca. 250 Blatt (60 bis 90 g/m²) Kassetteneinheit V1 (optional): ca. 250 Blatt (60 bis 90 g/m²) MF628Cw / MF623Cn Manuelle Zufuhr: 1 Blatt Papierkassette: ca. 150 Blatt (60 bis 90 g/m²) Kapazität des Ausgabefachs *1 (frischer Stapel Papier des Formats A4) ca.
0W5F-0FH Technische Daten der E-Mail-Sendefunktion Kommunikationsprotokoll *1 SMTP Datenformat PDF, PDF (Kompakt), PDF (Kompakt/OCR), PDF (OCR), JPEG, TIFF Schwarzweiß JPEG: 300 dpi TIFF: 300 dpi (MMR-Komprimierung) PDF/PDF (OCR): 300 dpi (MMR-Komprimierung) PDF (Kompakt)/PDF (Kompakt/OCR): Text 300 dpi, Hintergrund 150 dpi Auflösung Farbe JPEG: 300 dpi TIFF: 300 dpi (JPEG-Komprimierung) PDF/PDF (OCR): 200 dpi (JPEG-Komprimierung) PDF (Kompakt)/PDF (Kompakt/OCR): Text 300 dpi, Hintergrund 150 dpi Sys
0W5F-0FJ Technische Daten des Scannens in gemeinsame Ordner Kommunikationsprotokoll SMB (TCP/IP) Datenformat PDF, PDF (Kompakt), PDF (Kompakt/OCR), PDF (OCR), JPEG, TIFF Schwarzweiß JPEG: 300 dpi TIFF: 300 dpi (MMR-Komprimierung) PDF/PDF (OCR): 300 dpi (MMR-Komprimierung) PDF (Kompakt)/PDF (Kompakt/OCR): Text 300 dpi, Hintergrund 150 dpi Auflösung Farbe JPEG: 300 dpi TIFF: 300 dpi (JPEG-Komprimierung) PDF/PDF (OCR): 200 dpi (JPEG-Komprimierung) PDF (Kompakt)/PDF (Kompakt/OCR): Text 300 dpi, Hintergrun
0W5F-0FK Verbrauchsmaterial Im Folgenden finden Sie eine Richtschnur für die geschätzte Zeit, nach der das in diesem Gerät verwendete Verbrauchsmaterial ausgetauscht werden sollte. Kaufen Sie das Verbrauchsmaterial bei Ihrem autorisierten Canon Händler vor Ort. Beachten Sie bei der Lagerung von und im Umgang mit Verbrauchsmaterial die Sicherheits- und Gesundheitshinweise ( Verbrauchsmaterial).
Wenn Sie Tonerpatronen austauschen wollen, lesen Sie unter So tauschen Sie Tonerpatronen aus nach.
0W5F-0FL Optionale Elemente Die Funktionalität des Geräts kann mit den unten beschriebenen optionalen Elementen voll genutzt werden. Optionale Elemente können über die Einzelhandelsverkaufsstelle, bei der Sie das Gerät erworben haben, oder über Ihren Canon Händler vor Ort erworben werden.
Ausleserichtung der Magnetkarte Schriftseite nach oben Speicherung/Wiedergabe Wiedergabe Abmessungen (H x B x T) 40 x 88 x 96 mm (ohne Befestigungskit und Kabel) Gewicht ca. 200 g (mit Befestigungskit und Kabel) Systemoptionen (MF729Cx) In diesem Abschnitt werden die systembezogenen optionalen Elemente und ihre Funktionen beschrieben. Barcode Printing Kit Mit dieser Option können Sie Barcodes in verschiedenen Formaten generieren.
5 Geben Sie mit den Zahlentasten den Lizenzschlüssel ein, und tippen Sie auf . Die Registrierung wird gestartet. Warten Sie, bis die Meldung angezeigt wird. Wenn die Meldung angezeigt wird, aktivieren Sie die Funktionen, die zur Aktivierung der Option erforderlich sind, und registrieren Sie den Lizenzschlüssel erneut. 6 Tippen Sie auf .
0W5F-0FR Dem Gerät beiliegende Dokumente Die unten genannten Dokumente werden mit dem Gerät geliefert. Schlagen Sie bei Bedarf darin nach. Erste Schritte Lesen Sie dieses Dokument als Erstes. Darin wird vom Entfernen des Verpackungsmaterials bis zur Konfiguration des Geräts das grundlegende Vorgehen zur Inbetriebnahme beschrieben. Handbuch der WLANEinstellungen (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw) In diesem Handbuch wird beschrieben, wie Sie das Gerät mit einem Wireless LANRouter verbinden.
0W5F-0FS Verwenden der e-Anleitung Die e-Anleitung ist ein Handbuch, das auf dem Computer angezeigt werden kann und alle Funktionen des Geräts beschreibt. Sie können nach der geplanten Verwendung suchen oder ein Schlüsselwort eingeben, um schnell die gesuchte Seite zu finden. Sie können die eAnleitung nutzen, indem Sie sie auf dem Computer installieren oder die e-Anleitung direkt von der mitgelieferten DVD-ROM starten.
0W5F-0FU Installieren der e-Anleitung Installieren Sie die e-Anleitung mithilfe der mit dem Gerät gelieferten DVD-ROM auf dem Computer. 1 Legen Sie die mitgelieferte DVD-ROM in das Laufwerk des Computers ein. Wählen Sie eine Sprache, und klicken Sie auf [OK], wenn Sie dazu aufgefordert werden. 2 Klicken Sie auf [Benutzerdefinierte Installation]. Wenn der Bildschirm oben nicht angezeigt wird, finden Sie Informationen in Softwareprogrammen/Handbüchern].
5 6 7 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Ja], wenn Sie dieser zustimmen. Wählen Sie eine Sprache aus, und klicken Sie auf [Weiter]. Wählen Sie den Installationsordner aus, und klicken Sie auf [Installieren]. Die Installation beginnt. Warten Sie eine Weile. Der Vorgang kann einige Zeit in Anspruch nehmen. 8 Klicken Sie auf [Beenden].
9 Klicken Sie auf [Weiter] [Beenden]. Anzeigen der e-Anleitung Doppelklicken Sie auf dem Desktop auf das Verknüpfungssymbol für die e-Anleitung. Wenn eine Sicherheitswarnung angezeigt wird Klicken Sie auf [Geblockte Inhalte zulassen]. TIPPS zum Anzeigen der e-Anleitung direkt von der mitgelieferten DVD-ROM 1 Legen Sie die mitgelieferte DVD-ROM in das Laufwerk des Computers ein. Wählen Sie eine Sprache, und klicken Sie auf [OK], wenn Sie dazu aufgefordert werden.
0W5F-0FW Deinstallieren der e-Anleitung Sie können die e-Anleitung vom Computer entfernen und so den Zustand vor der Installation der e-Anleitung wiederherstellen. 1 Legen Sie die mitgelieferte DVD-ROM in das Laufwerk des Computers ein. Wählen Sie eine Sprache, und klicken Sie auf [OK], wenn Sie dazu aufgefordert werden. 2 Klicken Sie auf [Softwareprogramme starten]. Wenn der Bildschirm oben nicht angezeigt wird, finden Sie Informationen in Softwareprogrammen/Handbüchern].
6 Klicken Sie auf [Zurück] [Beenden].
0W5F-0FX Bildschirmlayout der e-Anleitung Die e-Anleitung ist auf mehrere Bildschirme unterteilt und der Inhalt jedes Bildschirms variiert. Startseite Wird beim Starten der e-Anleitung angezeigt. Canon Klicken Sie hier, um zur Startseite zurückzukehren. Registerkarte [Inhalt]/Registerkarte [Suchen] Klicken Sie hier, um zwischen dem Inhaltsverzeichnis und der Suche umzuschalten. Inhalt Die Titel der Kapitel werden angezeigt ( ). Zeigen Sie mit dem Mauszeiger auf einen Titel.
Klicken Sie hier, um zur Startseite zurückzukehren. [Lageplan] Klicken Sie auf diese Option, um alle Themen in der e-Anleitung anzuzeigen. [Hilfe] Klicken Sie auf diese Option, um Informationen zur Anzeige der e-Anleitung anzuzeigen, wie eine Suche durchgeführt wird und andere Informationen. [Druck] Klicken Sie hier, um den angezeigten Inhalt zu drucken. Praktische Funktionen Bietet eine Vielzahl von praktischen Verwendungsbeispielen für das Gerät.
[Inhalt] Die Kapitelsymbole und Titel werden angezeigt. [Alles einblenden]/[Alles ausblenden] Klicken Sie auf [Alles einblenden], um die Unterabschnitte aller Themen anzuzeigen. Klicken Sie auf [Alles ausblenden], um die Unterabschnitte aller Themen zu schließen. Kapitelsymbole Klicken Sie auf ein Kapitelsymbol, um zum Anfang des entsprechenden Kapitels zu navigieren. Themenseite Zeigt die Themen des ausgewählten Kapitels an.
[Schlüsselwörter hier eingeben] Geben Sie ein Schlüsselwort oder mehrere Schlüsselwörter ein, und klicken Sie auf , um die Suchergebnisse in der Suchergebnisliste anzuzeigen ( ). Trennen Sie Schlüsselwörter durch ein Leerzeichen, und suchen Sie nach Seiten, die alle Schlüsselwörter enthalten. Schließen Sie ein Schlüsselwort oder mehrere Schlüsselwörter in Anführungszeichen ein, um nur nach Seiten mit exakten Übereinstimmungen zu suchen.
Kapitelsymbole Klicken Sie hier, um zu dem Thema des ausgewählten Kapitels zu springen. Titel (Thema) Zeigt die Titel und Themen an. Klicken Sie auf einen Titel oder ein Thema, um zu der Seite zu springen. Klicken Sie hier, um zum Seitenanfang zurückzukehren. / Klicken Sie hier, um zum vorherigen oder nächsten Kapitel zu springen.
0W5F-0FY Anzeigen der e-Anleitung Kennzeichnungen Vorsichtshinweise zu Sicherheit, Beschränkungen und Vorsichtshinweise zur Handhabung des Geräts, praktische Tipps und andere Informationen werden mit den unten dargestellten Kennzeichnungen gekennzeichnet. Wenn Sie eine so gekennzeichnete Warnung nicht beachten, können ernsthafte Verletzungen oder Tod die Folge sein. Bitte beachten Sie diese Warnungen unbedingt, um den sicheren Betrieb zu gewährleisten.
0W5F-0H0 Sonstiges In diesem Abschnitt werden grundlegende Windows-Funktionen beschrieben. Außerdem finden Sie hier weitere Informationen, beispielsweise zum Haftungsausschluss, und Copyright-Informationen.
0W5F-0H1 Grundfunktionen in Windows Anzeigen von [Computer] oder [Arbeitsplatz] Anzeigen des Druckerordners Anzeigen der freigegebenen Drucker auf dem Druckserver Anzeigen des Bildschirms [Installation von Softwareprogrammen/Handbüchern] Drucken einer Testseite in Windows Überprüfen der Systemarchitektur Anzeigen des Computernamens Anzeigen des LPR-/RAW-Druckerports Anzeigen von [Computer] oder [Arbeitsplatz] Windows Vista/7/Server 2008 [Start] wählen Sie [Computer].
Freigegebene Drucker werden angezeigt. 1 Anzeigen des Bildschirms [Installation von Softwareprogrammen/Handbüchern] Wenn nach dem Einlegen der mitgelieferten DVD-ROM der Bildschirm [Installation von Softwareprogrammen/Handbüchern] nicht automatisch angezeigt wird, gehen Sie wie unten erläutert vor. Der Name des DVD-ROM-Laufwerks lautet in dieser Anleitung "D:". Je nach dem verwendeten Computer weist das DVD-ROM-Laufwerk jedoch möglicherweise einen anderen Namen auf.
4 Klicken Sie auf der Registerkarte [Allgemein] auf [Testseite drucken]. Die Testseite wird gedruckt. Überprüfen der Systemarchitektur Wenn Sie nicht wissen, ob auf Ihrem Computer die 32- oder 64-Bit-Version von Windows ausgeführt wird, gehen Sie wie folgt vor. 1 Rufen Sie [Systemsteuerung] auf. Windows Vista/7/Server 2008 [Start] wählen Sie [Systemsteuerung]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm wählen Sie [Systemsteuerung]. Windows 8.
Anzeigen des Computernamens Windows Vista/7/8/Server 2008/Server 2012 1 Rufen Sie [Systemsteuerung] auf. Windows Vista/7/Server 2008 [Start] wählen Sie [Systemsteuerung]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm Windows 8.1/Server 2012 R2 Klicken Sie mit der rechten Maustaste auf [Start] 2 wählen Sie [Systemsteuerung]. wählen Sie [Systemsteuerung] Rufen Sie [System] auf.
3 Überprüfen Sie die Porteinstellungen. Klicken Sie auf die Registerkarte [Anschlüsse]. Vergewissern Sie sich, dass für den Drucker der richtige Port ausgewählt ist.
0W5F-0H2 Für Anwender von Mac OS Abhängig davon, wann Sie das Gerät erworben haben, befand sich im Lieferumfang des Geräts möglicherweise kein Treiber für Mac OS. Die Treiber werden auf die Canon Website hochgeladen, wenn sie benötigt werden. Überprüfen Sie das Betriebssystem Ihres Computers, und laden Sie den entsprechenden Treiber von der Canon Website herunter. Informationen zur Installation und Verwendung des Treibers finden Sie im Installationshandbuch für den MF-Treiber.
0W5F-0H3 Hinweise Dienste und Software von Drittanbietern Dienste von Dritten EMC-Anforderungen der EU-Richtlinie Dieses Gerät inklusive Ausstattung erfüllt die wesentlichen EMC-Anforderungen der EU-Richtlinie. Wir erklären hiermit, dass dieses Produkt mit den EMC-Anforderungen der EU-Richtlinie zu Stromversorgungsnetzen von 230V, 50 Hz genügt, obwohl die Nennlast des Produktes bei 220 bis 240V, 50/60 Hz liegt.
Nur für Europäische Union und EWR (Norwegen, Island und Liechtenstein) Diese Symbole weisen darauf hin, dass dieses Produkt gemäß WEEE-Richtlinie (2012/19/EU; Richtlinie über Elektro- und ElektronikAltgeräte), Batterien-Richtlinie (2006/66/EG) und nationalen Gesetzen zur Umsetzung dieser Richtlinien nicht über den Hausmüll entsorgt werden darf.
HAFTET NICHT FÜR DIREKTE UND BEILÄUFIG ENTSTANDENE SCHÄDEN ODER FOLGESCHÄDEN JEDWEDER ART SOWIE FÜR EINKOMMENSVERLUSTE, DIE AUS DER NUTZUNG DIESE MATERIALS ENTSTEHEN. Copyright Copyright CANON INC. 2015 Ohne die ausdrückliche schriftliche Genehmigung von Canon Inc. darf diese Anleitung weder als Ganzes noch in Teilen reproduziert, übertragen, umgeschrieben, in Datenerfassungssystemen gespeichert oder in andere Landes- bzw. Computersprachen übersetzt werden.
Ländern. Copyright © 2008 Adobe Systems Incorporated. All rights reserved. Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269; 7,272,628; 7,278,168; Patents pending in the U.S. and other countries. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated. The name PostScript also is used as a product trademark for Adobe Systems' implementation of the PostScript language interpreter.
0W5F-0H4 Kontakt CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 2F Jinbao Building No.
㻝㻌㻛㻌㻠㻣
Einleitung 3 Informationen zu den Treibern und zur Software 4 Unterstützte Betriebssysteme 5 Auswählen des zu installierenden Treibers 6 Installieren 7 Installieren von der mitgelieferten DVD-ROM 8 Installieren nach dem Herunterladen von der Canon-Website 22 Installieren zur Verwendung von WSD 29 Deinstallieren 34 Fehlerbehebung 37 Anhang 38 Verwenden der Installationsanleitung 39 Bildschirmkonfiguration der Installationsanleitung 40 Anzeigen der Installationsanleitung 43 Sonstiges 44 Grundfunktionen in Win
0W67-000 Einleitung In dieser Installationsanleitung wird hauptsächlich erläutert, wie die MF-Treiber und MF Scan Utility installiert und deinstalliert werden. Systemanforderungen für die Installation der MF-Treiber oder MF Scan Utility. Unterstützte Betriebssysteme Installieren In diesem Abschnitt wird erläutert, wie die MF-Treiber und MF Scan Utility installiert werden, sodass mit dem Gerät von einem Computer Installieren aus gedruckt werden kann.
0W67-001 Informationen zu den Treibern und zur Software Lesen Sie vor der Installation der MF-Treiber oder anderer Software unbedingt die folgenden Informationen durch. Die Installationsmethode variiert je nach Verbindungsmethode und Umgebung. MF-Treiber Druckertreiber Faxtreiber *1 Nachdem Sie den Druckertreiber auf dem Computer installiert haben, können Sie über eine Anwendung mit dem Gerät drucken.
0W67-002 Unterstützte Betriebssysteme Im Folgenden wird die Unterstützung der MF-Treiber und von MF Scan Utility für die einzelnen Betriebssysteme aufgeführt.
0W67-003 Auswählen des zu installierenden Treibers Geben Sie vor der Installation der MF-Treiber auf dem Gerät die Methode der Verbindung mit dem Computer und die zu verwendenden Treibertypen an. 1 Drücken Sie , und tippen Sie auf . Wenn der Anmeldebildschirm angezeigt wird, geben Sie mit den Zahlentasten die richtige ID und PIN ein, und drücken Sie dann . (Anmelden am Gerät: e-Anleitung) 2 3 4 5 Tippen Sie auf . Tippen Sie auf .
0W67-004 Installieren In diesem Abschnitt wird erläutert, wie die MF-Treiber und MF Scan Utility installiert werden, sodass mit dem Gerät von einem Computer aus gedruckt werden kann. Installieren von der mitgelieferten DVD-ROM Installieren Sie die MF-Treiber und MF Scan Utility von der DVD-ROM, die sich im Lieferumfang des Geräts befindet. Führen Sie das Installieren von der Installationsverfahren vom Anschließen des Geräts und des Computers bis zur Installation der Treiber durch.
0W67-005 Installieren von der mitgelieferten DVD-ROM Die Reihenfolge bei einer Einfachen Installation ist wie folgt: "Installieren der Treiber" "Installieren der auf der DVD-ROM enthaltenen Software" "Installieren der e-Anleitung". Weitere Informationen zum Anschließen des Geräts und eines Computers finden Sie im Handbuch "Erste Schritte", bevor Sie beginnen.
Möchten Sie die e-Anleitung auf Ihrem Computer nicht installieren oder möchten Sie die installierte Software anpassen, klicken Sie auf [Benutzerdefinierte Installation]. Wenn der oben abgebildete Bildschirm nicht angezeigt wird, schlagen Sie unter von Softwareprogrammen/Handbüchern] nach. Anzeigen des Bildschirms [Installation Wenn [Automatische Wiedergabe] angezeigt wird, klicken Sie auf [MInst.exe ausführen]. 5 Wählen Sie die Methode für die Verbindung mit dem Computer aus.
8 Klicken Sie auf [Weiter]. 9 Folgen Sie den Anweisungen auf dem Bildschirm, um die Treiber zu installieren. USB-Verbindung 1 Folgen Sie den Anweisungen auf dem Bildschirm, um das Gerät und einen Computer über USB-Kabel zu verbinden, und schalten Sie das Gerät ein. 2 Klicken Sie auf [Beenden].
Die Installation der Treiber ist abgeschlossen. Wenn Sie nicht bestätigen können, dass das Gerät und der Computer verbunden sind Der unten aufgeführte Bildschirm wird z. B. angezeigt, wenn die Verbindung des Geräts mit einem Computer über USB-Kabel einige Zeit gedauert hat. Schalten Sie das Gerät aus, schließen Sie das Kabel erneut an, und schalten Sie das Gerät dann wieder ein. Wired/Wireless LAN-Verbindung 1 Wenn der folgende Bildschirm angezeigt wird, klicken Sie auf [Ja].
Wenn in [Geräteliste] keine Geräte angezeigt werden Überprüfen Sie die Computer- und Geräteverbindung sowie die IP-Adresseinstellungen (Anzeigen von Netzwerkeinstellungen: e-Anleitung), und klicken Sie auf [Geräteliste aktualisieren]. Wenn das Gerät weiterhin nicht angezeigt wird, klicken Sie auf [Anhand IP-Adresse suchen] geben Sie die auf dem Gerät festgelegte IPAdresse ein [OK]. 3 Überprüfen Sie die Einstellungen, und klicken Sie auf [Starten]. Die Installation der Treiber ist abgeschlossen.
Wenn Sie [Akzeptieren] gewählt haben, wird das Product Extended Survey Program installiert. Beim Product Extended Survey Program handelt es sich um ein Programm, das grundlegende Informationen in Bezug auf die Installation und Nutzung des Druckers monatlich für die Dauer von 10 Jahren an Canon übermittelt. Es überträgt keine weiteren Informationen und keine persönlichen Daten. Sie können das Product Extended Survey Program jederzeit deinstallieren.
Möchten Sie die Standardsoftware und die e-Anleitung auf Ihrem Computer installieren, klicken Sie auf [Einfache Installation]. Wenn der oben abgebildete Bildschirm nicht angezeigt wird, schlagen Sie unter von Softwareprogrammen/Handbüchern] nach. Anzeigen des Bildschirms [Installation Wenn [Automatische Wiedergabe] angezeigt wird, klicken Sie auf [MInst.exe ausführen]. 5 Wählen Sie die Methode für die Verbindung mit dem Computer aus.
7 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Ja], wenn Sie dieser zustimmen. 8 Klicken Sie auf [Weiter]. 9 Folgen Sie den Anweisungen auf dem Bildschirm, um die Treiber zu installieren. USB-Verbindung 1 Folgen Sie den Anweisungen auf dem Bildschirm, um das Gerät und einen Computer über USB-Kabel zu verbinden, und schalten Sie das Gerät ein.
2 Klicken Sie auf [Beenden]. Die Installation der Treiber ist abgeschlossen. Wenn Sie nicht bestätigen können, dass das Gerät und der Computer verbunden sind Der unten aufgeführte Bildschirm wird z. B. angezeigt, wenn die Verbindung des Geräts mit einem Computer über USB-Kabel einige Zeit gedauert hat. Schalten Sie das Gerät aus, schließen Sie das Kabel erneut an, und schalten Sie das Gerät dann wieder ein.
2 Wählen Sie das Gerät aus, und klicken Sie auf [Weiter]. Wenn in [Geräteliste] keine Geräte angezeigt werden Überprüfen Sie die Computer- und Geräteverbindung sowie die IP-Adresseinstellungen (Anzeigen von Netzwerkeinstellungen: e-Anleitung), und klicken Sie auf [Geräteliste aktualisieren]. Wenn das Gerät weiterhin nicht angezeigt wird, klicken Sie auf [Anhand IP-Adresse suchen] geben Sie die auf dem Gerät festgelegte IPAdresse ein [OK].
5 Geben Sie Details zu den einzelnen Treibern an. [Druckername]/[Faxname] Ändern Sie den Namen nach Bedarf. [Drucker gemeinsam benutzen]/[Fax gemeinsam benutzen] Aktivieren Sie das Kontrollkästchen, wenn Sie das Gerät freigeben möchten (und den Computer, auf dem Sie die Installation vornehmen, als Druckserver verwenden). Konfigurieren eines Druckservers: e-Anleitung [Freigegebener Name] Ändern Sie den freigegebenen Namen nach Bedarf.
7 Konfigurieren Sie das normalerweise verwendete Gerät, und führen Sie einen Testdruck durch. Zur Konfiguration des Geräts als normalerweise verwendetes Gerät wählen Sie den Treiber aus, und klicken Sie auf [Weiter]. Zum Drucken einer Testseite überprüfen Sie den Treiber. 8 Klicken Sie auf [Beenden]. Unter Windows Server 2003/Server 2008/Server 2012 wird MF Scan Utility nicht installiert. Fahren Sie mit Schritt 11 fort. Die Installation der Treiber ist abgeschlossen.
Wenn Sie [Akzeptieren] gewählt haben, wird das Product Extended Survey Program installiert. Beim Product Extended Survey Program handelt es sich um ein Programm, das grundlegende Informationen in Bezug auf die Installation und Nutzung des Druckers monatlich für die Dauer von 10 Jahren an Canon übermittelt. Es überträgt keine weiteren Informationen und keine persönlichen Daten. Sie können das Product Extended Survey Program jederzeit deinstallieren.
Wenn der Scannertreiber korrekt installiert wurde, wird im Ordner [Scanner und Kameras] oder [Eigenschaften von Scanner und Kameras] ein Symbol für den installierten Scanner angezeigt. MF Scan Utility Wenn MF Scan Utility korrekt installiert wurde, wird im Menü [Start] im Ordner [Canon] unter dem Ordner [MF Scan Utility] ein Symbol für MF Scan Utility angezeigt.
0W67-006 Installieren nach dem Herunterladen von der Canon-Website Installieren Sie die MF-Treiber oder MF Scan Utility nach dem Herunterladen der aktuellsten Version von der Canon-Website. Installieren der MF-Treiber Installieren von MF Scan Utility Prüfen der Ergebnisse der Installation Wenn das Gerät über ein USB-Kabel mit einem Computer verbunden wird Folgen Sie für den Anschluss eines USB-Kabels den Anweisungen auf dem Bildschirm.
6 Folgen Sie den Anweisungen auf dem Bildschirm, um die Treiber zu installieren. USB-Verbindung 1 Wählen Sie [USB-Verbindung] aus, und klicken Sie auf [Weiter]. 2 Folgen Sie den Anweisungen auf dem Bildschirm, um das Gerät und einen Computer über USB-Kabel zu verbinden, und schalten Sie das Gerät ein. 3 Klicken Sie auf [Beenden].
Die Installation der Treiber ist abgeschlossen. Wenn Sie nicht bestätigen können, dass das Gerät und der Computer verbunden sind Der unten aufgeführte Bildschirm wird z. B. angezeigt, wenn die Verbindung des Geräts mit einem Computer über USB-Kabel einige Zeit gedauert hat. Schalten Sie das Gerät aus, schließen Sie das Kabel erneut an, und schalten Sie das Gerät dann wieder ein. Wired/Wireless LAN-Verbindung 1 Wählen Sie [Netzwerkverbindung] aus, und klicken Sie auf [Weiter].
Unter Server 2003/Server 2008/Server 2012 wird dieser Bildschirm nicht angezeigt. Fahren Sie folgendermaßen fort. 3 Wählen Sie das Gerät aus, und klicken Sie auf [Weiter]. Wenn in [Geräteliste] keine Geräte angezeigt werden Überprüfen Sie die Computer- und Geräteverbindung sowie die IP-Adresseinstellungen (Anzeigen von Netzwerkeinstellungen: e-Anleitung), und klicken Sie auf [Geräteliste aktualisieren].
6 Geben Sie Details zu den einzelnen Treibern an. [Druckername]/[Faxname] Ändern Sie den Namen nach Bedarf. [Drucker gemeinsam benutzen]/[Fax gemeinsam benutzen] Aktivieren Sie das Kontrollkästchen, wenn Sie das Gerät freigeben möchten (und den Computer, auf dem Sie die Installation vornehmen, als Druckserver verwenden). Konfigurieren eines Druckservers: e-Anleitung [Freigegebener Name] Ändern Sie den freigegebenen Namen nach Bedarf.
8 Konfigurieren Sie das normalerweise verwendete Gerät, und führen Sie einen Testdruck durch. Zur Konfiguration des Geräts als normalerweise verwendetes Gerät wählen Sie den Treiber aus, und klicken Sie auf [Weiter]. Zum Drucken einer Testseite überprüfen Sie den Treiber. 9 Klicken Sie auf [Beenden]. Die Installation der Treiber ist abgeschlossen. Installieren von MF Scan Utility 1 2 Melden Sie sich über ein Administratorkonto am Computer an.
Faxtreiber Wenn der Faxtreiber korrekt installiert wurde, wird im Druckerordner ein Symbol für das installierte Faxgerät angezeigt ( Anzeigen des Druckerordners). Scannertreiber (Netzwerkverbindung) Wenn der Scannertreiber korrekt installiert wurde, wird im Ordner [Scanner und Kameras] oder [Eigenschaften von Scanner und Kameras] ein Symbol für den installierten Scanner angezeigt.
0W67-007 Installieren zur Verwendung von WSD Wenn Sie Windows Vista/7/8/Server 2008/Server 2012 verwenden, kann das WSD-Protokoll (Web Services on Devices) zum Drucken verwendet werden. Soll WSD verwendet werden, installieren Sie zuerst den Druckertreiber und fügen Sie dann einen Netzwerkdrucker hinzu. Installieren der MF-Treiber Hinzufügen eines Netzwerkdruckers Installieren der MF-Treiber 1 2 3 4 5 Melden Sie sich über ein Administratorkonto am Computer an. Öffnen Sie den Druckerordner.
6 Klicken Sie auf [Datenträger]. 7 Klicken Sie auf [Durchsuchen]. 8 Geben Sie den Ordner an, in dem die Treiber gespeichert sind, wählen Sie die Inf-Datei aus, und klicken Sie dann auf [Öffnen]. Geben Sie den Ordner mit den Treibern entweder auf der DVD-ROM oder in der heruntergeladenen Datei wie folgt an. Welche Treiber Sie angeben können, hängt von Ihrem Modell ab. * Geben Sie den Ordner für Ihre Sprache in [xxxx] an. UFR II [intdrv] [UFRII] PS [intdrv] [PS] PCL5 [intdrv] Datei.
10 Wählen Sie Ihren Drucker, und klicken Sie auf [Weiter]. 11 Ändern Sie wie erforderlich den Druckernamen, und klicken Sie auf [Weiter]. 12 Wählen Sie [Drucker nicht freigeben], und klicken Sie auf [Weiter]. Wenn Sie den Drucker freigeben möchten, nehmen Sie die Freigabeeinstellungen für den Drucker vor, der mit eines Netzwerkdruckers hinzugefügt wurde. (Konfigurieren eines Druckservers: e-Anleitung) 13 Hinzufügen Klicken Sie auf [Fertig stellen].
Die Installation ist abgeschlossen, und ein Symbol für den installierten Drucker wird im Druckerordner angezeigt. Hinzufügen eines Netzwerkdruckers 1 Öffnen Sie den Netzwerkordner. Windows Vista/Server 2008 wählen Sie [Netzwerk]. [Start] Windows 7/Server 2008 R2 [Computer] wählen Sie [Netzwerk]. [Start] Windows 8/Server 2012 Rechtsklicken Sie unten links auf dem Bildschirm Windows 8.1/Server 2012 R2 Klicken Sie mit der rechten Maustaste auf [Start] 2 [Explorer] wählen Sie [Netzwerk].
Löschen von nicht benötigten Druckersymbolen Nachdem Sie den Netzwerkdrucker installiert haben, wird das in Schritt 13 von Installieren der MF-Treiber hinzugefügte Symbol nicht mehr benötigt. Um das Symbol zu löschen, klicken Sie es mit der rechten Maustaste an und wählen Sie dann [Gerät entfernen] oder [Löschen] klicken Sie auf [Ja].
0W67-008 Deinstallieren Wenn Sie die installierten MF-Treiber, MF Scan Utility, das Product Extended Survey Program oder Toner Status nicht mehr benötigen, können Sie diese deinstallieren, um sie von Ihrem Computer zu löschen. Deinstallieren der MF-Treiber Deinstallieren von MF Scan Utility Deinstallation des Programms zur erweiterten Produktumfrage Deinstallieren von Toner Status Deinstallieren der MF-Treiber 1 2 3 Melden Sie sich über ein Administratorkonto am Computer an.
4 Klicken Sie auf [Löschen]. 5 Klicken Sie auf [Ja]. Die Deinstallation wird gestartet. Deinstallieren von MF Scan Utility 1 2 3 Melden Sie sich über ein Administratorkonto am Computer an. Öffnen Sie [Programme und Funktionen] oder [Software]. Wählen Sie [Canon MF Scan Utility] aus, und klicken Sie auf [Deinstallieren/ändern] oder [Ändern/Entfernen]. Der Uninstaller startet. 4 Anzeigen von [Programme und Funktionen] oder [Software] Klicken Sie auf [Ja]. Klicken Sie auf [OK].
5 Deinstallation des Programms zur erweiterten Produktumfrage 1 2 3 Melden Sie sich über ein Administratorkonto am Computer an. Öffnen Sie [Programme und Funktionen] oder [Software]. Anzeigen von [Programme und Funktionen] oder [Software] Wählen Sie [Canon Laser Printer/Scanner/Fax Extended Survey Program], und klicken Sie dann auf [Deinstallieren] oder [Entfernen]. Der Uninstaller startet. 4 Klicken Sie auf [OK].
0W67-009 Fehlerbehebung Wenn Probleme während der Installation oder Deinstallation der MF-Treiber und von MF Scan Utility auftreten, lesen Sie die folgenden Abschnitte, bevor Sie sich an Canon wenden.
0W67-00A Anhang Der Anhang enthält Informationen, die Sie wissen sollten, wie beispielsweise die Verwendung der Installationsanleitung sowie Informationen zu Haftungsausschluss und Urheberrecht.
0W67-00C Verwenden der Installationsanleitung Die Installationsanleitung ist ein Leitfaden, den Sie auf Ihrem Computer ansehen können. Er bietet Informationen zur Installation von Treibern. Sie können die Seiten durch eine Suche nach dem, was Sie tun möchten, oder durch Eingabe von Schlüsselwörtern schnell auffinden. So suchen Sie nach Themen Sie können die gesuchte Seite anhand der folgenden drei Verfahren suchen.
0W67-00E Bildschirmkonfiguration der Installationsanleitung Die Installationsanleitung ist auf mehrere Bildschirme unterteilt und der Inhalt jedes Bildschirms variiert. Startseite Diese Seite wird beim Starten der Installationsanleitung angezeigt. Canon-Logo Klicken Sie darauf, um von anderen Seiten zur Startseite zurückzukehren. Registerkarte [Inhalt]/Registerkarte [Suchen] Klicken Sie darauf, um zwischen den Registerkarten [Inhalt] und [Suchen] zu wechseln. Inhalt Zeigt die Titel der Kapitel an ( ).
[Inhalt] Kapitelsymbole und Thementitel werden auf dieser Registerkarte angezeigt. [Alles einblenden]/[Alles ausblenden] Klicken Sie auf [Alles einblenden], um die Unterabschnitte aller Themen anzuzeigen. Klicken Sie auf [Alles ausblenden], um die Unterabschnitte aller Themen zu schließen. Kapitelsymbole Klicken Sie auf ein Kapitelsymbol, um zum Anfang des entsprechenden Kapitels zu navigieren. Themen Zeigt die Themen des ausgewählten Kapitels an.
[Schlüsselwörter hier eingeben] Geben Sie ein oder mehrere Schlüsselwörter ein, und klicken Sie auf , um die Suchergebnisse in einer Ergebnisliste anzuzeigen. Sie können eine Phrase eingeben, um Seiten zu finden, die alle Wörter in der Phrase enthalten. Um nach der genauen Phrase zu suchen, stellen Sie sie in doppelte Anführungszeichen. [Suchoptionen] Klicken Sie darauf, um Suchbedingungen anzugeben, wie den Suchbereich und die Beachtung der Groß-/Kleinschreibung.
0W67-00F Anzeigen der Installationsanleitung Kennzeichnungen Einschränkungen und Vorsichtshinweise zur Handhabung des Druckers, praktische Tipps und andere Informationen werden mit den unten dargestellten Kennzeichnungen markiert. So werden Warnungen zur Bedienung und Einschränkungen angezeigt. Bitte lesen Sie diese Hinweise unbedingt, damit Sie den Drucker richtig bedienen und Beschädigungen an dem Drucker oder der Umgebung vermeiden.
0W67-00H Sonstiges In diesem Abschnitt werden grundlegende Windows-Funktionen beschrieben. Außerdem finden Sie hier weitere Informationen, beispielsweise zum Haftungsausschluss, und Copyright-Informationen.
0W67-00J Grundfunktionen in Windows Anzeigen des Druckerordners Anzeigen des Bildschirms [Installation von Softwareprogrammen/Handbüchern] Überprüfen der Systemarchitektur Anzeigen von [Programme und Funktionen] oder [Software] Anzeigen des Druckerordners Windows Vista [Start] wählen Sie [Systemsteuerung] [Drucker]. Windows 7/Server 2008 R2 [Start] wählen Sie [Geräte und Drucker]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm anzeigen]. Windows 8.
Klicken Sie auf [System und Sicherheit] oder [System und Wartung] [System]. Windows Server 2008 Doppelklicken Sie auf [System]. 3 Überprüfen Sie die Bitarchitektur. 32-Bit-Betriebssysteme [32 Bit-Betriebssystem] wird angezeigt. 64-Bit-Betriebssysteme [64 Bit-Betriebssystem] wird angezeigt. Anzeigen von [Programme und Funktionen] oder [Software] Windows Vista/7/Server 2008 R2 [Start] [Systemsteuerung] wählen Sie [Programm deinstallieren].
0W67-00K Hinweise Haftungsausschluss Die Angaben in diesem Dokument können ohne vorherige Ankündigung geändert werden. CANON INC. GIBT BEZÜGLICH DIESES MATERIALS KEINE GEWÄHRLEISTUNGEN JEGLICHER ART, WEDER VERTRAGLICH NOCH GESETZLICH, AUSSER DEN HIER ANGEGEBENEN, EINSCHLIESSLICH, JEDOCH NICHT BESCHRÄNKT AUF, GEWÄHRLEISTUNGEN FÜR MARKTFÄHIGKEIT, HANDELSÜBLICHE QUALITÄT, EIGNUNG FÜR EINEN BESTIMMTEN ZWECK UND PATENTVERLETZUNG. CANON INC.