Operation Manual

When loading A5 size paper
● When setting the paper size, mak
e sure the current paper orientation.
Specifying Paper Size and Type in
the Multi-Purpose T
ray(P. 162)
Landscape orientation
Portrait orientation
1
Spread the paper guides apart.
● Slide the paper guides outwar
d.
2
Insert the paper and align the paper guides against the width of the paper.
● Load the paper with the print side face up.
● Insert the paper 10 to 20 mm into the manual feed slot, and then slide the paper guides inwar
d until they are
aligned securely against the edges of the paper.
Align the paper guides securely against the edges of the paper
● Paper guides that ar
e too loose or too tight can cause misfeeds or paper jams.
3
Insert the paper slowly into the manual feed slot until it reaches the back of the slot.
● The paper is pulled slightly into the machine after it r
eaches the back of the slot.
Basic Operations
152