Operation Manual

Setting Up Using the Setup Guide

1W2X-004

When the machine is turned on (

Turning ON the Machine(P. 117) ) for the rst time, the Setup Guide starts up to

assist you to congur

e the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the

setting screens are displayed in the following order.

Step 1 Setting the Display Language and the Country or Region

Set the language to be displayed on the operation panel screen or in reports, as well as the

country or r

egion where the machine will be used.

Select a language.

Select <Yes>.

Select a country or region.

Step 2 Setting the Date and Time

Adjust the machine's date/time.

Select a time zone.

What is UTC?

● Coor

dinated Universal Time (UTC) is the primary time standard by which the

world regulates clocks and time. The correct UTC time zone setting is required

for Internet communications.

Enter the date and time, and select <Apply>.

● Tap the entry eld, and enter the date and time.

Step 3 Setting the Access Security Measures

Set a PIN to access the Remote UI. Because the Remote UI can be used to change the machine

settings fr

om a computer, setting of a PIN is recommended.

Select <Yes>.

● If you select <No>, PIN is not set, and the Setup Guide proceeds to step 4.

● You can also set the access security measure of the Remote UI later.

Setting

a Remote UI PIN

(P. 359)

Enter a PIN, and then select <Apply>.

Enter the same PIN, and then select <Apply>.

Step 4 Performing the Color Adjustment

To achieve good copy quality, adjust the gradation.

Select <Yes>.

● If you select <No>, color adjustment is not performed, and the Setup Guide

oceeds to step 5.

Check that the size and type of paper displayed on the screen is loaded in the

machine, and select <OK>.

Setting Up