Operation Manual
Cleaning the Fixing Assembly
1W2X-09J
If the xing assembly is dirty
, the printout may get smudged. To clean the xing assembly, perform the following
procedure. Note that you cannot clean the xing assembly when the machine has documents waiting to be printed. To
clean the xing assembly, you need plain A4 or Letter size paper. Set the paper in the paper drawer or multi-purpose
tray before performing the following procedure.
Loading Paper(P. 140)
MF735Cx / MF734Cdw / MF732Cdw(P. 586)
MF635Cx / MF633Cdw / MF631Cn(P. 587)
● Prior to performing cleaning, mak
e sure that there remains a sucient amount remaining in the toner
cartridges.
Checking the Remaining Amount of Consumables(P. 594)
MF735Cx / MF734Cdw / MF732Cdw
Ther
e are two ways of cleaning, from which you should choose one depending on how the paper is smudged. To clean
the xing assembly, rst perform <Clean Fixing Assembly (Reduce Paper Back Side Stain)>. If this results in no effect,
then try <Clean Fixing Assembly>.
◼ Clean Fixing Assembly (Reduce Paper Back Side Stain)
● Cleaning will be mor
e effective if it is performed about one hour after completion of the previous printing
session.
1
Select <Menu> in the Home screen.
Home Screen(P. 123)
2
Select <Adjustment/Maintenance> <Maintenance>.
3
Select <Clean Fixing Assembly (Reduce Paper Back Side Stain)>.
4
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <OK>.
5
Select <Start>.
➠ Cleaning starts. When a message appears notifying that cleaning is complete, pr
ess
to return to the
Home scr
een.
● When <Clean Fixing Assembly (Reduce Paper Back Side Stain)> is complete, a sheet of blank paper is
ejected. If the symptom does not improve, then also perform <Clean Fixing Assembly>.
Maintenance
586