Operation Manual

6
Open the feeder or the platen glass cover after the screen displayed during printing
disappears.
7
Place the adjustment image on the platen glass.
● Place the adjustment image with the print side facing do
wn and the black stripe toward the back side of the
machine.
8
Gently close the feeder or the platen glass cover.
9
Select <Start Scanning>.
➠ The placed adjustment image is scanned, and then the second adjustment image is printed.
10
Open the feeder or the platen glass cover, remove the rst adjustment image, and
then place the second adjustment image on the platen glass with the print side face
do
wn.
● In the same way as for the rst adjustment image, place the adjustment image with the print side facing
do
wn and the black stripe toward the back side of the machine.
11
Gently close the feeder or the platen glass cover.
12
Select <Start Scanning>.
➠ The adjustment image is scanned and adjustment starts.
13
When a message appears notifying that adjustment is complete, open the feeder or
the platen glass co
ver, and remove the adjustment image.
14
Gently close the feeder or the platen glass cover.
If the <Could not perform correction.> message is displayed
● Did you load the paper displayed in step 4 into the paper sour
ce?
Maintenance
599