Operation Manual
4
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <OK>.
5
Conrm the pr
ocedure, and select <Start>.
➠ An adjustment image is printed.
6
Open the feeder or the platen glass cover after the screen displayed during printing
disappears.
7
Place the adjustment image on the platen glass.
● Place the adjustment image with the print side facing do
wn and the black stripe toward the back side of the
machine.
8
Gently close the feeder or the platen glass cover.
9
Select <Start Scanning>.
➠ The adjustment image is scanned and adjustment starts.
10
When a message appears notifying that adjustment is complete, open the feeder or
the platen glass co
ver, and remove the adjustment image.
11
Gently close the feeder or the platen glass cover.
If the <Could not perform correction.> message is displayed
● Did you load the paper displayed in step 4 into the paper sour
ce?
● Did you place the adjustment image with the print side face down, with the black stripe toward the back side
of the machine?
● Has a paper jam occurred?
Clearing Paper Jams(P. 673)
● Is the amount r
emaining in toner cartridge sucient? If the amount remaining in the toner cartridge is low,
it is recommended that you replace the toner cartridge.
Checking the Remaining Amount of
Consumables(P
. 594)
Maintenance
601