Operation Manual
● When <Mode 1> or <Mode 2> is specied, printed images may be blurry
.
Paper Curls
Are you using appropriate paper?
● Check
usable paper, and replace with appropriate paper. Also, specify the paper size and type settings
properly.
Available Paper(P. 705)
Loading Paper(P. 140)
Specifying Paper Size and Type(P. 159)
● Change
the setting of <Paper Curl Correction>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.
<Paper Curl Correction>(P. 472)
● Setting a gr
eater improvement effect may result in faded printouts or slower printing speed.
● Reload the paper by changing the side to print on (front side/back side).
● In
rare cases the symptom may become worse depending on the paper. If this occurs, change the side to
print on back to the previous side.
Ar
e you using paper that has absorbed moisture?
● Replace with appropriate paper.
Loading Paper(P. 140)
● Change
the setting of <Paper Type> to a setting for thinner paper. For example, if the current setting is
<Plain 1>, change it to <Plain L>.
Specifying Paper Size and Type(P. 159)
Available Paper(P. 705)
● Change
the setting of <Paper Curl Correction>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.
<Paper Curl Correction>(P. 472)
● Setting a gr
eater improvement effect may result in faded printouts or slower printing speed.
Troubleshooting
645