Operation Manual
● Check whether the LAN cable is connected corr
ectly.
Connecting to a Wired LAN(P. 17)
#755
Scanned data could not be sent as e-mail or I-Fax nor stored in the shared folder or FTP server because
T
CP/IP was not working correctly.
● Check <TCP/IP Settings>, and set correctly.
<Network>(P. 451)
An IP addr
ess is not set.
● Set the IP address correctly.
Setting IP Addresses(P. 31)
The machine cannot communicate with de
vices on a network immediately after the machine starts up
because the waiting time for the start of the communication is set.
● The machine cannot start communicating immediately after it is turned ON. Wait until the set time for
<Wait Time for Conn. at Startup> passes after turning ON the machine, and send again.
Setting a Wait Time for Connecting to a Network(P. 55)
#766
The certicate has e
xpired.
● Update the certicate or use a certicate that has not expired.
● Check that the <Current Date/Time Settings> are correct.
Setting the Date/Time(P. 12)
#801
When communicating with an SMTP server to send an e-mail/I-Fax, a timeout error occurred from the
server.
● Check whether SMTP is running on the network corr
ectly.
● Check whether the machine is properly installed and correctly connected to the network.
Installation/Settings Problems(P. 621)
When communicating with the SMTP server, an err
or returned from the server.
● Check whether the SMTP server is set correctly.
A destination is not set correctly.
● Check whether the destination is set correctly.
When storing a scanned original into the shared folder, an error occurred from the folder.
● Check whether the shared folder and the computer that has the shared folder are running correctly.
The incorrect folder name or password was specied when storing to the shared folder.
● Check the destination settings.
Troubleshooting
667