Facsimile Guide

CHAPTER
Setting the Receive Mode
5-1
5
Receiving Faxes
This chapter describes the different ways to receive faxes. It also explains how to set the
receive mode and to cancel the documents the machine is receiving.
Setting the Receive Mode
Follow this procedure to set the receive mode:
1 Press [Menu].
2 Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [Set].
3 Press [ (-)] or [ (+)] to select <RECEIVE MODE> ➞ press [Set].
4 Press [ (-)] or [ (+)] to select the receive mode ➞ press [Set].
You can select from the following:
- <FaxOnly> to automatically receive faxes, all calls will be answered as fax
transmission. Voice calls will then be disconnected.(See "Receiving Faxes
Automatically: FaxOnly Mode," on p. 5-2.)
- <FaxTel> to automatically switch between fax and voice calls. Faxes will be received
automatically, and the machine will ring for voice calls. (See "Receiving Both Faxes
and Voice Calls Automatically: FaxTel Mode," on p. 5-3.)
- <AnsMode> to receive faxes automatically and route voice calls to an answering
machine connected to the machine. (See "Receiving When an Answering Machine Is
Connected: AnsMode," on p. 5-4.)