Facsimile Guide
Adjusting the TX REPORT Setting
6-5
Reports and Lists
6
Adjusting the TX REPORT Setting
The machine can print a TX (transmission) report (TX REPORT or ERROR TX
REPORT) after sending a document. You can set it to print every time it sends a
document, or only when an error occurs. Alternatively, you can disable printing the
report. By default, the machine is set to print a TX report only when an error occurs.
NOTE
•
The recipient's fax/telephone number (RECIPIENT ADDRESS) is not shown for the
manually sent faxes.
•
The machine does not print a TX report when faxing the documents from your computer.
*******************
*******************
*** ***
TX REPORT
TRANSMISSION OK
TX/RX NO 0004
RECIPIENT ADDRESS 1 432 2060
DESTINATION ID
ST. TIME 12/31 17:52
TIME USE 00'11
PAGES SENT 1
RESULT OK
12/31/2005 17:52 FAX 1234567 CANON 001
TX REPORT
************************
************************
*** ***
ERROR TX REPORT
12/31/2005 17:21 FAX 1234567 CANON 001
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0005
RECIPIENT ADDRESS 20 545 8545
DESTINATION ID
ST. TIME 12/31 17:21
TIME USE 00'00
PAGES SENT 0
RESULT NG # 0018 BUSY/NO SIGNAL
OK: Transmission successful
NG: Some or no pages sent
Error code
Number of pages sent
Transmission duration
Transmission time
ERROR TX REPORT