Facsimile Guide

Menu Descriptions
8-6
Machine Settings
8
(The factory default setting is in bold face.)
6. REMOTE RX Enables/disables remote receiving.
ON The machine enables remote receiving.
REMOTE RX ID You can dial code on the remote extension to start receiving a document.
A combination of two characters using 0 to 9, and # is possible. The
default character is 25.
OFF The machine disables remote receiving.
7. RX REDUCTION Receives images at a reduced size.
ON Image reduction is turned on.
1. RX REDUCTION AUTO SELECTION: Reducing size is set automatically.
FIXED REDUCTION: Reducing size is preset.
97%, 95%, 90%, 75%
2. SELECT REDUCE DIR VERTICAL ONLY: Reduction is performed in the vertical direction only.
HORIZ & VERTICAL: Reduction is performed in the horizontal and
vertical direction.
OFF Image reduction is turned off.
8. TONER SUPPLY LOW Allows you to set how the machine responds when the toner supply is
low.
RX TO MEMORY The machine receives all documents in the memory.
KEEP PRINTING The keep printing function is turned on. With this setting, the machine
will not store documents in the memory if the toner has run out. Re-set to
<RX TO MEMORY> after replacing the cartridge with a new one.
6. SYSTEM SETTINGS Sets the FAX DEFAULT function
1. FAX DEFAULT Sets the default for the fax functions.
1. SCAN DENSITY Sets the scan density.
STANDARD Suitable for standard documents.
DK Suitable for light documents.
LT Suitable for dark documents.
2. RESOLUTION Sets the fax resolution.
STANDARD Suitable for most text-only documents.
FINE Suitable for fine-print documents.
PHOTO Suitable for documents that contains photographs.
SUPER FINE Suitable for documents that contain fine print and images. (The
resolution is four times that of STANDARD)
ULTRA FINE Suitable for documents that contain fine print and images. (The
resolution is eight times that of STANDARD)
Name Descriptions