Printing Guide
Font Parameters
3-4
Bar Code Symbols and Formats
3
p Parameter
The p parameter, <Esc>(s#p, controls whether a human readable text caption is printed with
bar codes, and the method used to print it.
■ 1D Bar Codes
The numbers below represent the values that are used to define the commands in the
escape sequence.
Example: If 24p is entered as the 1D bar code using the p parameter, the text for the
French postal bar code is placed under the code.
NOTE
•
Add 10 to print the UPC/EAN/JAN checksum in the middle left, rather than the bottom left of the bar
code.
•
Add 10 to print the start and end characters for the 39 bar code text.
•
Add 20 to format text for the French or German postal bar codes.
•
Add 100 to print the checksum character with the text.
■ Australia Post 4 State Bar Code
0: Uses the default value.
1: Does not print human readable text.
2: Prints embedded human readable text.
3: Prints human readable text that is half-embedded.
4: Prints human readable text under the code.
5: Prints human readable text above the code.
0: Uses the N symbol set (numeric digits only) for customer information.
1: Uses the C symbol set (alphanumeric characters) for customer information.