㻝㻌㻛㻌㻢㻤㻝
Wichtige Sicherheitsvorschriften Aufstellung Stromversorgung Handhabung Wartung und Überprüfung Verbrauchsmaterial Inbetriebnahme des Geräts Überprüfen des mitgelieferten Zubehörs Entfernen des Verpackungsmaterials Vorbereiten von Tonerpatronen Einlegen von Papier Anbringen der Hörerablage und Anschluss des Hörers (optional) (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Anschließen des Netzkabels Einschalten des Geräts und Konfiguration der Anfangseinstellungen Anschließen an einen Computer Herstellen einer Wirele
Speichern von Daten im Adressbuch (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Speichern von Empfängern im Adressbuch Speichern von Empfängern als Favoriten Speichern mehrerer Empfänger für die Gruppenwahl Einstellen der Lautstärke Wechseln in den Schlafmodus Einstellen der Zeit bis zum automatischen Abschalten (nur MF8540Cdn / MF8230Cn) Kopieren Grundlegende Kopierfunktionen Auswählen von Kopierpapier Abbrechen des Kopierens Verschiedene Kopiereinstellungen Vergrößern oder Verkleinern Auswählen von D
Überprüfen von Status und Log für gesendete und empfangene Dokumente Senden von Faxen vom Computer aus (PC-Fax) Senden von PC-Faxen Hinzufügen von Deckblättern zu PC-Faxen Verwenden des Adressbuchs Speichern von Empfängern Verwenden von gespeicherten Empfängern Importieren/Exportieren von Adressbuchdaten Verwenden des Geräts als Drucker Drucken von einem Computer Drucken von Dokumenten Abbrechen des Druckens Anzeigen des Druckstatus und des Logs Verschiedene Druckeinstellungen Vergrößern oder Verkleinern We
Scannen mithilfe einer Anwendung Konfigurieren von Scaneinstellungen in ScanGear MF Konfigurieren von Scaneinstellungen im einfachen Modus Konfigurieren von Scaneinstellungen im erweiterten Modus Praktisches Scannen mit einem gerätbasierten Vorgang Direktes Speichern gescannter Dokumente auf einem USB-Speicher Direktes Versenden von Dokumenten als E-Mails über das Gerät (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Direktes Speichern von Dokumenten in einem gemeinsamen Ordner (nur MF8580Cdw / MF8550Cdn / MF8540Cd
gemeinsamen Ordnern (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Konfigurieren des Geräts für das Senden gescannter Dokumente per E-Mail Konfigurieren grundlegender E-Mail-Einstellungen Konfigurieren erweiterter E-Mail-Einstellungen Konfigurieren des Geräts für das Speichern gescannter Dokumente in gemeinsamen Ordnern Festlegen eines gemeinsamen Ordners als Speicherort Konfigurieren des Geräts für die Netzwerkumgebung Konfigurieren von Etherneteinstellungen Ändern der maximalen Übertragungseinheit Einstellen ein
Remote UI-Bildschirme Verwalten von Dokumenten und Anzeigen des Gerätestatus Einstellen von Menüoptionen über Remote UI Speichern/Laden gespeicherter Daten Speichern/Laden von Adressbuchdaten (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Speichern/Laden von Einstellungen Speichern des Adressbuchs über Remote UI (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Liste der Menüeinstellungen Netzwerkeinstellungen Präferenzen Timereinstellungen Allgemeine Einstellungen Kopiereinstellungen Faxeinstellungen
Justieren der Werte für die Textfarbenreproduzierbarkeit in Farbdokumenten Drucken von Berichten und Listen SE Ergebnisbericht (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Bericht Kommunikationsverwaltung (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) EM Ergebnisbericht (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Bericht Verwaltung Abteilungs-ID Adressbuchliste (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Anwenderdatenliste/Datenliste Systemmanager Liste IPSec Richtlinie Fontliste PCL (nur MF8580
0CC5-000 Wichtige Sicherheitsvorschriften In diesem Kapitel wird beschrieben, wie Sie Sachschäden und Verletzungen bei den Benutzern des Geräts und anderen Personen vermeiden können. Lesen Sie dieses Kapitel vor der Inbetriebnahme des Geräts durch, und befolgen Sie die Anweisungen für die ordnungsgemäße Verwendung. Bedienen und verwenden Sie das Gerät ausschließlich wie in dieser Anleitung beschrieben.
0CC5-001 Aufstellung Lesen Sie die folgenden Sicherheitshinweise sorgfältig durch, und stellen Sie das Gerät an einem geeigneten Ort auf, sodass Sie es sicher und komfortabel verwenden können.
Schlecht belüftete Aufstellorte vermeiden Das Gerät erzeugt im normalen Betrieb eine geringe Menge Ozon u. Ä. Die Menge ist nicht gesundheitsschädlich, doch einige Menschen reagieren unter Umständen empfindlich auf Ozon u. Ä. Bei längerem Gebrauch oder langen Produktionszyklen können Ozon u. Ä. verstärkt bemerkbar werden, insbesondere in schlecht belüfteten Räumen. Der Raum, in dem das Gerät betrieben wird, sollte ausreichend gelüftet werden, um für ein angenehmes Arbeitsumfeld zu sorgen.
0CC5-002 Stromversorgung Das Gerät ist mit einer Spannung von 220 bis 240 V und einer Netzfrequenz von 50/60 Hz kompatibel. Schließen Sie das Gerät ausschließlich an einen Netzanschluss mit der angegebenen Netzspannung an. Andernfalls besteht Feuergefahr oder die Gefahr eines elektrischen Schlags. Verwenden Sie ausschließlich das mitgelieferte Netzkabel. Andernfalls besteht Feuergefahr oder die Gefahr eines elektrischen Schlags.
0CC5-003 Handhabung Trennen Sie umgehend den Netzstecker von der Netzsteckdose, und wenden Sie sich an einen autorisierten Canon Händler, wenn von dem Gerät ungewöhnliche Geräusche oder Gerüche ausgehen oder es zu Rauch- oder übermäßiger Wärmeentwicklung kommt. Bei fortgesetztem Betrieb kann es zu Feuer oder einem elektrischen Schlag kommen. Zerlegen und modifizieren Sie das Gerät nicht.
Dieses Gerät ist als Laserprodukt der Klasse 1 gemäß IEC 60825-1:2007 (EN60825-1:2007) klassifiziert. Der Laserstrahl kann für Menschen schädlich sein. Da der Laserstrahl in der Lasereinheit durch eine Abdeckung vollständig verschlossen ist, kann die Laserstrahlung während des normalen Gerätebetriebs nicht nach außen dringen. Lesen Sie die folgenden Bemerkungen und Sicherheitshinweise. Öffnen Sie nur die Abdeckungen, die Sie laut diesem Handbuch öffnen dürfen.
0CC5-004 Wartung und Überprüfung Reinigen Sie das Gerät regelmäßig. Wenn sich Staub ansammelt, funktioniert das Gerät möglicherweise nicht ordnungsgemäß. Beachten Fehlerbehebung Sie beim Reinigen die folgenden Anweisungen. Wenn während des Betriebs ein Problem auftritt, schlagen Sie in nach. Wenn Sie das Problem nicht beheben können oder der Meinung sind, dass eine Überprüfung erforderlich ist, schlagen Sie in Wenn sich ein Problem nicht beheben lässt nach.
0CC5-005 Verbrauchsmaterial Entsorgen Sie gebrauchte Tonerpatronen nicht durch Verbrennen. Lagern Sie Tonerpatronen oder Papier nicht in der Nähe offener Flammen. Ansonsten können sich Toner oder Papier entzünden, und es besteht Verbrennungs- oder Feuergefahr. Wischen Sie versehentlich verschütteten Toner mit einem feuchten, weichen Tuch auf. Vermeiden Sie es, den Tonerstaub einzuatmen.
Lagern Sie Patronen unter folgenden Umgebungsbedingungen, um einen sicheren Gebrauch und hohe Qualität sicherzustellen. Temperatur bei Lagerung: 0 bis 35°C Luftfeuchtigkeit bei Lagerung: 35 bis 85 % relative Luftfeuchtigkeit (nicht kondensierend) * Öffnen Sie die Schutzhülle erst, wenn Sie die Tonerpatrone benötigen.
0CC5-006 Inbetriebnahme des Geräts Führen Sie zur Inbetriebnahme des Geräts die unten beschriebenen Schritte 1 bis 9 aus. Wenn Sie weitere Informationen zu einem Schritt wünschen, klicken Sie auf den Link, um den entsprechenden Abschnitt aufzurufen.
Schritt 9 Konfigurieren der Anfangseinstellungen für Faxfunktionen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) 㻝㻥㻌㻛㻌㻢㻤㻝
0CC5-007 Überprüfen des mitgelieferten Zubehörs Sollten Teile fehlen oder beschädigt sein, wenden Sie sich an eine autorisierte Canon Servicestelle oder den Canon Kundendienst.
User Software CD-ROM Multi-lingual User Manual CD HINWEIS Je nach Land oder Region werden unter Umständen unterschiedliche Teile mitgeliefert. Das Gerät wird ohne USB-Kabel, LAN-Kabel und Router geliefert. Halten Sie diese Teile bei Bedarf bereit. Vergewissern Sie sich, dass das USB-Kabel mit der folgenden Markierung versehen ist. Mitgelieferte Tonerpatronen Die durchschnittliche Kapazität der mit dem Gerät gelieferten Tonerpatronen geht aus den Tabellen unten hervor.
Hinweise zur User Software CD-ROM Die User Software CD-ROM enthält verschiedene Treiber, Tools und weitere nützliche Software. Installieren Sie diese nach Bedarf. MF-Treiber Dazu gehören die Druckertreiber, der Faxtreiber (nur MF8580Cdw / MF8550Cdn / MF8280Cw) und der Scannertreiber sowie die MF Network Scan Utility zum Scannen von Dokumenten über ein Netzwerk.
0CC5-008 Entfernen des Verpackungsmaterials Lesen Sie die Sicherheitshinweise in Aufstellung und Handhabung, tragen Sie das Gerät an den Aufstellort, und entfernen Sie orangefarbenes Klebeband und Verpackungsmaterial. Form und Lage des hier beschriebenen Verpackungsmaterials können sich von denen bei Ihrem Gerät unterscheiden, da Teile des Verpackungsmaterials möglicherweise ohne Ankündigung verändert, ergänzt oder weggelassen werden.
MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn 3 Öffnen Sie die hintere Abdeckung vollständig. MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn 4 Entfernen Sie das Klebeband und das Verpackungsmaterial.
5 6 Schließen Sie die hintere Abdeckung. Öffnen Sie die Zufuhr. 7 Entfernen Sie das Klebeband und das Verpackungsmaterial. 8 Schließen Sie die Zufuhr vorsichtig. HINWEIS Stellen Sie sicher, dass das gesamte Verpackungsmaterial vom Gerät entfernt wurde.
0CC5-009 Vorbereiten von Tonerpatronen Das Gerät wird mit eingesetzten Tonerpatronen geliefert. Sie müssen die Schutzstreifen vor dem Gebrauch aus den Patronen ziehen. Wartung und Überprüfung und Verbrauchsmaterial. Lesen Sie vor dem Vorbereiten der Tonerpatronen die Sicherheitshinweise in 1 Öffnen Sie die vordere Abdeckung. 2 Ziehen Sie das Patronenfach heraus.
5 Schließen Sie die vordere Abdeckung. HINWEIS Vergewissern Sie sich, dass alle vier Schutzstreifen aus dem Gerät entfernt wurden.
0CC5-00A Einlegen von Papier In diesem Abschnitt wird beschrieben, wie Sie A4-Papier in die Papierkassette einlegen. Lesen Sie vor dem Einlegen von Papier die Wartung und Überprüfung. Sicherheitshinweise in WICHTIG Wenn Sie Papier in einem anderen Formats als A4 einlegen Der Bildschirm mit den Anfangseinstellungen erscheint beim erstmaligen Einschalten des Geräts. Legen Sie das Papier nach den Bildschirmanweisungen ein.
4 Richten Sie die Papierführungen an den Kanten des Papiers aus. Drücken Sie den Entriegelungshebel, und schieben Sie die Papierführungen nach innen, bis sie eng an den Kanten des Papiers anliegen. WICHTIG: Papierführungen an den Kanten des Papiers ausrichten Zu eng oder nicht eng genug anliegende Papierführungen können Fehleinzüge oder Papierstaus verursachen. 5 » Setzen Sie die Papierkassette in das Gerät ein.
0CC5-00C Anbringen der Hörerablage und Anschluss des Hörers (optional) (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Bringen Sie die optionale Hörerablage am Gerät an, und schließen Sie den Hörer an. Legen Sie vorab alle mitgelieferten Teile bereit. 1 Entfernen Sie die beiden Abdeckungen. 2 Stecken Sie die Dübel mit Stiften in die Bohrungen der Hörerablage. HINWEIS: Drücken Sie die Stifte zu diesem Zeitpunkt noch nicht ganz in die Dübel.
6 Schließen Sie das Modularkabel des Hörers an die Buchse für Hörer an. 7 Bringen Sie die vier Klemmen für das Hörerkabel an. 8 Führen Sie das Hörerkabel durch die Klemmen, und schließen Sie sie.
0CC5-00E Anschließen des Netzkabels Schließen Sie das Netzkabel an das Gerät an. Lesen Sie vor dem Anschließen des Netzkabels die Sicherheitshinweise in Stromversorgung. HINWEIS Schließen Sie das USB-Kabel noch nicht an. Warten Sie, bis Sie die Software installiert haben, um das USB-Kabel anzuschließen. 1 Vergewissern Sie sich, dass das Gerät ausgeschaltet ist. 2 Schließen Sie das weibliche Ende des Netzkabels an den Netzeingang an der Rückseite des Geräts an.
0CC5-00F Einschalten des Geräts und Konfiguration der Anfangseinstellungen Schalten Sie das Gerät EIN, und konfigurieren Sie die Anfangseinstellungen nach den Bildschirmanweisungen. 1 Schalten Sie das Gerät EIN. 2 Wählen Sie mit / die Anzeigesprache, und drücken Sie 3 Wählen Sie mit / das Land bzw. die Region, und drücken Sie 4 Lesen Sie die angezeigten Hinweismeldungen, und drücken Sie , um fortzufahren. . .
7 Wählen Sie mit / , ob die Farbkorrektur durchgeführt werden soll, und drücken Sie dann . Wenn die Farbkorrektur durchgeführt wird, können Sie Kopien und Ausdrucke erstellen, die stärker die Farben und die Dichte des Originaldokuments reproduzieren. Die Farbkorrektur nimmt ungefähr 2 bis 4 Minuten in Anspruch. Die Farbkorrektur kann später durchgeführt werden. Durchführen der Farbkorrektur 1 Vergewissern Sie sich, dass Papier des im Display angezeigten Formats und Typs in das Gerät eingelegt .
Rückseite des Geräts weisend aufgelegt? Ist ein Papierstau aufgetreten? Beheben von Dokumenten- und Papierstaus Wenn Sie die Farbkorrektur erneut vornehmen möchten Befolgen Sie die Anweisungen auf dem Bildschirm, bis der rechts von Schritt 8 dargestellte Bildschirm angezeigt wird, und führen Sie die Farbkorrektur dann erneut durch. Kopiertes Bild justieren 8 » » Vergewissern Sie sich, dass einer der hier dargestellten Bildschirme angezeigt wird.
0CC5-00H Anschließen an einen Computer Beim Anschließen des Geräts an einen Computer können Sie zwischen einer Wireless LAN-, Wired LAN- oder USB-Verbindung auswählen. Wählen Sie die Verbindungsmethode je nach der Umgebung und den verwendeten Geräten aus. Herstellen einer Wireless LAN-Verbindung (nur MF8580Cdw / MF8280Cw) Ein LAN-Kabel ist nicht erforderlich, da die Kommunikation zwischen Gerät und Router drahtlos über Funk erfolgt.
Wenn der unten dargestellte Bildschirm angezeigt wird, fahren Sie mit Herstellen einer USB-Verbindung fort. HINWEIS Das Gerät wird ohne LAN-Kabel und Router geliefert. Halten Sie diese Teile bei Bedarf bereit. Wenn Sie nicht sicher wissen, ob der verwendete Router Wireless LAN- oder verkabelte LAN-Verbindungen unterstützt, schlagen Sie in der mit dem Router gelieferten Anleitung nach, oder wenden Sie sich an die Hersteller.
0CC5-00J Herstellen einer Wireless LAN-Verbindung (nur MF8580Cdw / MF8280Cw) Die Verbindung zwischen Gerät und Computer wird über einen Wireless LAN-Router hergestellt. Ein LAN-Kabel ist nicht erforderlich, da die Kommunikation zwischen Gerät und Router drahtlos über Funk erfolgt. HINWEIS Das Gerät wird ohne Wireless LAN-Router geliefert. Halten Sie dieses Teil bei Bedarf bereit. Der Wireless LAN-Router muss IEEE 802.11b/g/n entsprechen und das 2,4-GHz-Frequenzband für die Kommunikation verwenden können.
HINWEIS: Wenn der Remote UI-Bildschirm nicht angezeigt wird Stellen Sie sicher, dass das Gerät über ein Wireless LAN ordnungsgemäß mit dem Computer verbunden ist. Probleme mit Installation/Einstellungen 5 Installieren Sie die Software. Installieren Sie die MF-Treiber, die MF Toolbox und die übrige mitgelieferte Software. Weitere Informationen finden Sie im Installationshandbuch für den MF-Treiber.
0CC5-00K Herstellen einer Wired LAN-Verbindung Die Verbindung zwischen Gerät und Computer wird über einen Wired LAN-Router hergestellt. Schließen Sie das Gerät mit einem LANKabel an den Router an. HINWEIS Das Gerät wird ohne LAN-Kabel und Router geliefert. Halten Sie diese Teile bei Bedarf bereit. Verwenden Sie für den LANAnschluss ein Twisted-Pair-Kabel der Kategorie 5 oder höher. Vergewissern Sie sich, dass am Router Anschlüsse für das Gerät und den Computer zur Verfügung stehen.
HINWEIS: Wenn der Remote UI-Bildschirm nicht angezeigt wird Stellen Sie sicher, dass das Gerät, der Computer und Router ordnungsgemäß über LAN-Kabel verbunden sind und Probleme mit Installation/Einstellungen die IP-Adresse korrekt eingerichtet ist. 5 Installieren Sie die Software. Installieren Sie die MF-Treiber, die MF Toolbox und die übrige mitgelieferte Software. Weitere Informationen finden Sie im Installationshandbuch für den MF-Treiber.
0CC5-00L Herstellen einer USB-Verbindung Installieren Sie die Software, und schließen Sie dann das Gerät mit einem USB-Kabel an den Computer an. Das Gerät wird ohne USBKabel geliefert. Halten Sie das Kabel bei Bedarf bereit. 1 Installieren Sie die Software. Installieren Sie die MF-Treiber, die MF Toolbox und die übrige mitgelieferte Software. Weitere Informationen finden Sie im Installationshandbuch für den MF-Treiber. 2 Nehmen Sie die Schutzkappe vom USB-Anschluss an der Rückseite des Geräts ab.
0CC5-00R Konfigurieren der Anfangseinstellungen für Faxfunktionen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Führen Sie zur Konfiguration der Faxeinstellungen die unten beschriebenen Schritte 1 bis 4 aus. Ermitteln Sie zunächst den für Ihre Zwecke geeigneten Empfangsmodus, und konfigurieren Sie dann die Einstellungen nach den Bildschirmanweisungen. Wenn Sie nähere Informationen zu einem Schritt wünschen, klicken Sie auf den Link, um den entsprechenden Abschnitt aufzurufen.
0CC5-00S Ermitteln des geeigneten Faxempfangsmodus Ermitteln Sie vor der Konfiguration der Faxeinstellungen den für Ihre Zwecke geeigneten Empfangsmodus. Zweck Empfangsmodus Nur Faxen/Telefon wird nie benutzt Verwenden Sie diese Einstellung, wenn Sie mit dem Gerät ausschließlich Faxe empfangen und das Telefon bzw. den optionalen Hörer gar nicht verwenden. Überwiegend Telefonieren/Fax wird fast nie benutzt Faxen und Telefonieren Schließen Sie Ihr Telefon an das Gerät an.
0CC5-00U Speichern der Faxnummer und des Gerätenamens Speichern Sie die Faxnummer und den Gerätenamen Ihres Geräts. Diese Informationen werden oben auf jeder vom Gerät gesendeten Seite gedruckt. 1 2 Drücken Sie Wählen Sie mit . / die Option , und drücken Sie . HINWEIS: Wenn Sie wählen, wird der Empfangsmodus auf eingestellt.
» Weiter mit Auswählen des Empfangsmodus LINKS Senden von Faxen 㻠㻢㻌㻛㻌㻢㻤㻝
0CC5-00W Auswählen des Empfangsmodus Ermitteln Sie vorab den für Ihre Zwecke geeigneten Empfangsmodus ( Ermitteln des geeigneten Faxempfangsmodus). HINWEIS Wenn Sie auf dem Bildschirm für die Faxeinrichtung zuvor ausgewählt haben ( Speichern der Faxnummer den Bildschirm für die und des Gerätenamens), blenden Sie mit Faxeinrichtung ein. 1 Drücken Sie .
» Weiter mit Anschließen an die Telefonleitung LINKS Empfangen von Faxen 㻠㻤㻌㻛㻌㻢㻤㻝
0CC5-00X Anschließen an die Telefonleitung Schließen Sie das Gerät an die Telefonleitung an. HINWEIS Wenn Sie auf dem Bildschirm für die Faxeinrichtung zuvor ausgewählt haben ( Speichern der Faxnummer den Bildschirm für die und des Gerätenamens), blenden Sie mit Faxeinrichtung ein. 1 Drücken Sie . Einer der hier abgebildeten Bildschirme wird angezeigt, nachdem der Empfangsmodus eingestellt wurde ( Empfangsmodus).
HINWEIS: Wenn Sie ein externes Telefon mit Faxfunktionen anschließen, konfigurieren Sie am Telefon den manuellen Faxempfang. 3 4 Drücken Sie , nachdem Sie das Gerät an die Telefonleitung angeschlossen haben. Wählen Sie mit / die Option , und drücken Sie 5 Drücken Sie 6 Starten Sie das Gerät neu. . . Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Beim Neustart des Geräts wird der Telefonleitungstyp automatisch eingestellt.
Empfangen von Faxen 㻡㻝㻌㻛㻌㻢㻤㻝
0CC5-00Y Grundfunktionen In diesem Kapitel werden die häufig ausgeführten Grundfunktionen wie beispielsweise die Verwendung des Bedienfelds oder das Einlegen von Papier und Dokumenten beschrieben. Teile und ihre Funktionen In diesem Abschnitt werden die äußeren und inneren Bauteile des Geräts und ihre Funktionen sowie die Tasten auf dem Bedienfeld und Teile und ihre Funktionen die Anzeigen im Display erläutert.
Speichern von Daten im Adressbuch In diesem Abschnitt wird beschrieben, wie Sie Empfänger für das Senden von Faxen oder gescannten Dokumenten speichern. Speichern von Daten im Adressbuch (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Einstellen der Lautstärke In diesem Abschnitt wird beschrieben, wie Sie die Lautstärke für verschiedene Signaltöne des Geräts, beispielsweise am Ende des Einstellen der Lautstärke Sendens von Faxen oder bei Fehlern, einstellen.
0CC5-010 Teile und ihre Funktionen In diesem Abschnitt werden die Teile des Geräts (außen an der Vorder- und Rückseite sowie innen) und ihre Funktionsweise beschrieben. Neben den bei Grundfunktionen wie dem Einlegen von Dokumenten und Papier und dem Austauschen der Tonerpatronen wichtigen Teilen werden dabei auch die Tasten auf dem Bedienfeld und die Anzeigen im Display erläutert. Außerdem finden Sie in diesem Abschnitt Tipps zum ordnungsgemäßen Gebrauch des Geräts.
0CC5-011 Vorderseite MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Zufuhr Führt dem Gerät automatisch Dokumente für das Scannen zu. Wenn zwei oder mehr Blätter in die Zufuhr eingelegt werden, können die Dokumente fortlaufend gescannt werden. Einlegen von Dokumenten Bedienfeld Das Bedienfeld enthält Tasten wie die Zahlentasten und die Taste [Start], ein Display und Statusanzeigen. Sie können über das Bedienfeld alle Funktionen ausführen und Einstellungen vornehmen.
Ausgabefach Bedrucktes Papier wird am Ausgabefach ausgegeben. Transportführung für die manuelle Zufuhr Senken Sie bei einem Papierstau in der manuellen Zufuhr die Transportführung für die manuelle Zufuhr, um das gestaute Papier zu entfernen. Beheben von Dokumenten- und Papierstaus Vorlagenglas Legen Sie zu scannende Dokumente auf das Vorlagenglas. Legen Sie auch dicke oder gebundene Dokumente wie Bücher, die nicht in die Zufuhr eingelegt werden können, auf das Vorlagenglas.
0CC5-012 Rückseite MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Buchse für Hörer (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Schließen Sie hier den optionalen Hörer an. MF8580Cdw / MF8550Cdn / MF8280Cw) Anbringen der Hörerablage und Anschluss des Hörers (optional) (nur USB-Anschluss Schließen Sie hier ein USB-Kabel an, wenn Sie das Gerät mit einem Computer verbinden.
0CC5-013 Innen MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Tonerpatronenfach Setzen Sie die Tonerpatronen Y (Gelb), M (Magenta), C (Cyan) und K (Schwarz) der Reihe nach von hinten nach vorne in die Vertiefungen ein.
0CC5-014 Manuelle Zufuhr MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Papierführungen Stellen Sie die Papierführungen genau auf die Breite des eingelegten Papiers ein, damit das Papier gerade in das Gerät eingezogen wird. Papierfach (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Ziehen Sie beim Einlegen von Papier das Papierfach heraus. Fachverlängerung (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Öffnen Sie beim Einlegen von Papier die Fachverlängerung.
0CC5-015 Papierkassette MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn Papierführungen Stellen Sie die Papierführungen genau auf das Format des eingelegten Papiers ein, damit das Papier gerade in das Gerät eingezogen wird. Drücken Sie dazu die in den Abbildungen mit einem Pfeil markierten Entriegelungshebel, um die Sperre aufzuheben, und verschieben Sie die Papierführungen.
0CC5-016 Bedienfeld HINWEIS Die Abbildung oben zeigt das Bedienfeld des MF8580Cdw. Welche Tasten oder Funktionen zur Verfügung stehen, hängt vom Modell ab. Funktionsauswahltasten Mit diesen Tasten aktivieren Sie die Kopier-, Fax-, Scan- bzw. USB-Druckfunktion. Die Faxfunktion steht nur beim MF8580Cdw / MF8550Cdn / MF8280Cw zur Verfügung. Display Taste [Rückstell] Mit dieser Taste können Sie Einstellungen verwerfen und die zuvor festgelegten Einstellungen wiederherstellen.
Wenn Sie Einstellwerte ändern, erhöhen Sie mit dieser Taste den Wert. Taste [ ] Wenn Sie Einstellungen vornehmen, gelangen Sie mit dieser Taste zum nächsten Bildschirm. Beim Eingeben von Text verschieben Sie mit dieser Taste den Cursor nach rechts. Mit dieser Taste erhöhen Sie außerdem die Signaltonlautstärke oder einen Einstellwert, wie beispielsweise die Dichte beim Scannen, Kopieren usw.
Mit dieser Taste löschen Sie eingegebene Zahlen und Text. Taste [Stopp] Mit dieser Taste brechen Sie das Kopieren, Faxen und andere Funktionen ab. Taste [#] Mit dieser Taste geben Sie Sonderzeichen wie "@" oder "/" ein. Taste [Start] (Farbe) Mit dieser Taste scannen oder kopieren Sie Dokumente in Farbe. Außerdem werden die Ausdrucke farbig gedruckt, wenn Sie das Drucken von Bildern von einem USB-Speichergerät mit dieser Taste starten.
0CC5-017 Schnelltasten Mit den Schnelltasten auf der rechten Seite des Bedienfelds können Sie Funktionen einfacher und effizienter ausführen. Mithilfe der Schnelltasten können Sie gescannte Bilder auf einem Computer speichern oder beim Kopieren den Papierverbrauch verringern. Taste [Scannen > PC1]/[Scannen > PC2] Diese Tasten vereinfachen das Scannen erheblich.
0CC5-018 Display Das Display enthält die Bildschirme für das Kopieren, Scannen und andere Funktionen sowie Bildschirme zum Vornehmen von Einstellungen für diese Funktionen. Außerdem können Sie Informationen wie Fehlermeldungen und den Kommunikationsstatus im Display anzeigen. Hauptbildschirm Wenn Sie , , oder drücken, wird der Hauptbildschirm für die ausgewählte Funktion angezeigt. Im Folgenden sehen Sie als Beispiel den Hauptbildschirm für das Kopieren.
Liste der Menüeinstellungen Bildschirm Wenn Sie (Bericht) drücken, wird der Bildschirm angezeigt. Auf diesem Bildschirm können Sie Berichte wie die Sende- und Empfangsergebnisse für Faxe oder die Adressbuchliste drucken. Außerdem können Sie angeben, ob Berichte automatisch gedruckt werden sollen.
Kopier/Druckauftrag>. Diese Option zeigt die Netzwerkeinstellungen, wie die IP-Adresse des Geräts, und den Status, wie den Zustand der Wireless LANKommunikation. Anzeigen von Netzwerkeinstellungen Wenn eine Meldung angezeigt wird Meldungen werden oben im Bildschirm angezeigt, wenn beispielsweise das Papier ausgeht oder der Toner zur Neige geht. Im Display werden abwechselnd der normale Bildschirm und die Meldung angezeigt.
0CC5-019 Anmelden am Gerät Wenn die Verwaltung per Abteilungs-ID aktiviert ist, müssen Sie sich vor dem Gebrauch des Geräts anmelden. Wenn der Anmeldebildschirm angezeigt wird, befolgen Sie zum Eingeben von Abteilungs-ID und PIN die folgenden Schritte. Das Anmeldeverfahren kann auch für die Systemmanager-ID erforderlich sein. 1 Geben Sie die ID ein. 1 Wählen Sie mit 2 Geben Sie mit den Zahlentasten eine maximal 7-stellige Zahl ein, und drücken Sie . / die Option (bzw.
0CC5-01A Einlegen von Dokumenten Legen Sie Dokumente auf das Vorlagenglas und in die Zufuhr. Verwenden Sie zum Scannen dicker oder gebundener Dokumente wie Bücher das Vorlagenglas. Sie können zwei oder mehr Blätter in die Zufuhr einlegen, damit sie fortlaufend gescannt werden können. Weitere Informationen zu den Dokumententypen, die auf das Vorlagenglas oder in die Zufuhr gelegt werden können, sowie Informationen Dokumententypen oder Scanbereich.
2 Legen Sie das Dokument mit der bedruckten Seite nach unten auf das Vorlagenglas. Richten Sie die Ecke des Dokuments an der linken oberen Ecke des Vorlagenglases aus. HINWEIS: Um transparente Dokumente zu scannen (zum Beispiel Transparentpapier oder Folien), bedecken Sie sie mit normalem weißen Papier. 3 Schließen Sie die Zufuhr vorsichtig. Das Gerät ist damit zum Scannen des Dokuments bereit. Wenn das Scannen abgeschlossen ist, nehmen Sie das Dokument vom Vorlagenglas herunter.
Sie können bis zu 50 Blätter auf einmal einlegen. Wenn 51 oder mehr Blätter eingelegt werden, stoppt der Scanvorgang möglicherweise, oder es kann zu einem Papierstau kommen. 4 Richten Sie die Dokumentenführungen an den Kanten des Dokuments aus. Schieben Sie die Dokumentenführungen nach innen, bis sie eng an den Kanten des Dokuments anliegen. Das Gerät ist damit zum Scannen des Dokuments bereit.
0CC5-01C Einlegen von Papier Sie können Papier in die Papierkassette oder die manuelle Zufuhr einlegen. Legen Sie das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Die Papierkassette ist praktisch für große Papiermengen. Verwenden Sie die manuelle Zufuhr, wenn Sie vorübergehend Papier eines anderen Formats oder Typs als in der Papierkassette verwenden. Informationen zu den verfügbaren Papier.
Papiertyp Papiereinstellung am Gerät Papiergewicht 60 bis 74 g/m² *1 70 bis 84 g/m² *1 75 bis 90 g/m² *2 Recyclingpapier 60 bis 74 g/m² Farbiges Papier 60 bis 74 g/m² 85 bis 120 g/m² 121 bis 163 g/m² Normalpapier *2 Schweres Papier Briefumschlag 100 bis 110 g/m² 111 bis 130 g/m² 131 bis 160 g/m² 161 bis 220 g/m² Beschichtetes
starken Schwankungen der Temperatur oder Luftfeuchtigkeit ausgesetzt ist. HINWEIS Beim Bedrucken von feuchtem Papier Aus dem Papierausgabebereich kann Wasserdampf austreten, und auf der Rückseite des Bedienfelds oder um den Papierausgabebereich können sich Wassertröpfchen bilden. Diese Phänomene sind normal und treten besonders bei niedriger Raumtemperatur auf, wenn die beim Fixieren des Toners auf dem Papier erzeugte Wärme zum Verdunsten der Feuchtigkeit im Papier führt.
0CC5-01E Einlegen von Papier in die Papierkassette Legen Sie das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Wenn Sie auf Papier drucken wollen, das nicht in der Einlegen von Papier in die manuelle Zufuhr Papierkassette eingelegt ist, legen Sie das Papier in die manuelle Zufuhr. WICHTIG Papier unbedingt hochkant einlegen Sie können Papier nicht im Querformat einlegen. Legen Sie das Papier unbedingt im Hochformat ein.
3 Legen Sie das Papier so ein, dass der Papierstapel an der Rückwand der Papierkassette anliegt. Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten auszurichten. WICHTIG: Nicht über die Füllhöhenmarkierung hinaus Papier einlegen Achten Sie darauf, dass der Papierstapel nicht über die Füllhöhenmarkierung ( kann es zu Papierstaus kommen. ) hinausragt.
LINKS Papier 㻣㻣㻌㻛㻌㻢㻤㻝
0CC5-01F Einlegen von Papier in die manuelle Zufuhr Wenn Sie auf Papier drucken wollen, das nicht in der Papierkassette eingelegt ist, legen Sie das Papier in die manuelle Zufuhr. Legen Sie Einlegen von Papier in die Papierkassette das Papier, das Sie in der Regel verwenden, in die Papierkassette ein. Beim MF8580Cdw / MF8550Cdn / MF8540Cdn Beim MF8280Cw / MF8230Cn WICHTIG Papier unbedingt hochkant einlegen Sie können Papier nicht quer einlegen.
4 Schieben Sie das Papier bis zum Anschlag in die manuelle Zufuhr ein. Legen Sie das Papier hochkant (mit der kurzen Seite zum Gerät hin) und mit der zu bedruckenden Seite nach oben weisend ein. Sie können Papier nicht quer einlegen. Fächern Sie den Papierstapel gut auf, und klopfen Sie damit leicht auf eine ebene Fläche, um die Kanten auszurichten.
2 Legen Sie das Papier ein, und richten Sie die Papierführungen an der Breite des Papiers aus. Legen Sie das Papier hochkant (mit der kurzen Seite zur Zufuhr hin) und mit der zu bedruckenden Seite nach oben weisend ein. Sie können Papier nicht quer einlegen. Schieben Sie das Papier 10 bis 20 mm in die manuelle Zufuhr hinein, und schieben Sie die Papierführungen nach innen, bis sie eng an den Kanten des Papiers anliegen.
0CC5-01H Einlegen von Briefumschlägen Achten Sie darauf, Briefumschläge vor dem Einlegen gegebenenfalls flachzudrücken. Beachten Sie außerdem die Ausrichtung der Briefumschläge und die nach oben weisende Seite. Vorbereitungen für das Einlegen von Briefumschlägen In der Papierkassette In der manuellen Zufuhr HINWEIS In diesem Abschnitt wird beschrieben, wie Sie Briefumschläge in der gewünschten Ausrichtung einlegen und welche Schritte Sie vor dem Einlegen von Briefumschlägen ausführen müssen.
In der Papierkassette Legen Sie die Briefumschläge Monarch (nur MF8280Cw / MF8230Cn), COM10, DL oder ISO-C5 hochkant (mit den langen Seiten an der Seite) und mit der klebstofffreien Seite (Vorderseite) nach oben weisend ein. Sie können die Rückseite von Briefumschlägen nicht bedrucken. HINWEIS Briefumschläge im Format Monarch können Sie am MF8580Cdw / MF8550Cdn / MF8540Cdn nicht in die Papierkassette einlegen. Legen Sie sie in die manuelle Zufuhr ein.
0CC5-01J Einlegen von bereits bedrucktem Papier Wenn Sie Papier verwenden, das bereits mit einem Logo bedruckt wurde, achten Sie auf die Ausrichtung des Papiers, wenn Sie es einlegen. Legen Sie das Papier ordnungsgemäß ein, sodass der Druck auf der richtigen Seite des Papiers mit Logo erfolgt.
Drucken auf querformatigem Papier mit Logos HINWEIS Die Einstellung (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Wenn Sie auf bereits bedrucktes Papier drucken, müssen Sie bei jedem Wechsel zwischen einseitigem und doppelseitigem Ausdruck beachten, mit welcher Seite nach oben das Papier eingelegt werden muss.
0CC5-01K Angeben von Papierformat und -typ Sie müssen die Einstellungen für Papierformat und Papiertyp entsprechend dem eingelegten Papier vornehmen. Achten Sie darauf, die Papiereinstellungen zu ändern, wenn Sie Papier einlegen, das sich vom zuvor eingelegten Papier unterscheidet. WICHTIG Wenn die Einstellung nicht mit dem Format und dem Typ des eingelegten Papiers übereinstimmt, kann es zu einem Papierstau oder Druckfehler kommen.
0CC5-01L Angeben von Format und Typ des Papiers in der Papierkassette 1 Drücken Sie (Papier/Einstellungen auswählen). Wenn der Bildschirm unten erscheint, wählen Sie mit . Sie 2 Wählen Sie oder , und drücken Sie / die Option , und drücken . wird nur angezeigt, wenn die optionale Papierkassette (Kassette 2) installiert ist (nur MF8580Cdw / MF8550Cdn / MF8540Cdn).
0CC5-01R Angeben von Format und Typ des Papiers in der manuellen Zufuhr Der hier abgebildete Bildschirm wird angezeigt, wenn Papier in die manuelle Zufuhr eingelegt wird. Nehmen Sie die Einstellungen nach den Bildschirmanweisungen und entsprechend dem Format und Typ des eingelegten Papiers vor.
2 Wählen Sie den Papiertyp, und drücken Sie .
0CC5-01S Speichern von Standardpapiereinstellungen für die manuelle Zufuhr Sie können Standardpapiereinstellungen für die manuelle Zufuhr speichern. Wenn Sie Standardeinstellungen speichern, brauchen Sie die Einstellungen nicht jedes Mal vorzunehmen, wenn Sie das gleiche Papier in die manuelle Zufuhr einlegen.
2 Geben Sie die Länge der (kürzeren) -Achse der Seite an. Wählen Sie , und drücken Sie . Geben Sie die Länge der -Achse der Seite mit . 3 / oder mit den Zahlentasten ein, und drücken Sie Geben Sie die Länge der (längeren) -Achse der Seite an. Wählen Sie , und drücken Sie . Geben Sie die Länge der -Achse der Seite ein, und drücken Sie . 4 5 Drücken Sie . Wählen Sie den Papiertyp, und drücken Sie .
0CC5-01U Speichern eines anwenderdefinierten Papierformats Sie können bis zu drei häufig verwendete anwenderdefinierte Papierformate speichern. 1 Drücken Sie (Papier/Einstellungen auswählen). Wenn der Bildschirm unten erscheint, wählen Sie mit . Sie / die Option , und drücken 2 Wählen Sie , und drücken Sie 3 Wählen Sie , und drücken Sie . .
4 Geben Sie das Papierformat an. 1 Geben Sie die Länge der (kürzeren) -Achse der Seite an. Wählen Sie , und drücken Sie . Geben Sie die Länge der -Achse der Seite mit . 2 / oder mit den Zahlentasten ein, und drücken Sie Geben Sie die Länge der (längeren) -Achse der Seite an. Wählen Sie , und drücken Sie . Geben Sie die Länge der -Achse der Seite ein, und drücken Sie . 3 5 Drücken Sie . Wählen Sie den Papiertyp, und drücken Sie .
HINWEIS: Die gespeicherten Papierformate werden angezeigt, wenn Sie die Standardpapiereinstellungen für die manuelle Zufuhr festlegen. Sie können auf dem Bildschirm eins der angezeigten Formate als Standardpapierformat für die manuelle Zufuhr auswählen.
0CC5-01W Verwenden des Bedienfelds Legen Sie über die unten dargestellten Tasten die Einstellungen und Einstellwerte fest. Verwenden von / Bildlauf auf dem Bildschirm Wenn nicht alle Informationen auf einen Bildschirm passen, wird auf der rechten Seite des Bildschirms eine Bildlaufleiste angezeigt. / einen Bildlauf nach oben bzw. unten aus. Der Text und die Hintergrundfarben einer Option Führen Sie in diesem Fall mit werden umgekehrt, wenn es ausgewählt ist.
Verwenden von Drücken Sie zum Anwenden einer Einstellung . Verwenden der Multifunktionstasten (links/rechts) In manchen Fällen erscheinen wie auf dem folgenden Bildschirm zu sehen Optionen wie und unten am Bildschirm. Drücken Sie zum Auswählen einer dieser Optionen die entsprechende Multifunktionstaste (links/rechts).
0CC5-01X Eingeben von Text In diesem Abschnitt wird das Eingeben von Text und Zahlen beschrieben. Wechseln des Zeichentyps Drücken Sie , um den Zeichentyp für die Eingabe zu wechseln. Der zurzeit ausgewählte Zeichentyp wird durch "A", "a" oder "12" oben rechts neben dem Texteingabefeld angezeigt. HINWEIS: Sie können auch drücken, um den Zeichentyp zu wechseln.
Beispiel: "Canon-1" 1 Drücken Sie (oder 2 Drücken Sie 3 Drücken Sie (oder 4 Drücken Sie so oft, bis der Buchstabe "a" ausgewählt ist. 5 Drücken Sie so oft, bis der Buchstabe "n" ausgewählt ist. 6 Drücken Sie so oft, bis der Buchstabe "o" ausgewählt ist. 7 Drücken Sie so oft, bis der Buchstabe "n" ausgewählt ist. 8 Drücken Sie so oft, bis das Sonderzeichen "-" ausgewählt ist. 9 Drücken Sie (oder 10 11 Drücken Sie ) so oft, bis ausgewählt ist.
0CC5-01Y Speichern von Daten im Adressbuch (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Sie können häufig verwendete Empfänger im Adressbuch speichern und bei Bedarf mühelos auswählen. Sie können bis zu 200 Empfänger im Adressbuch speichern. Sie können die Empfänger alphabetisch in Listen im Adressbuch suchen, oder Sie können eine dreistellige Nummer (Nummer für kodierte Wahl) eingeben. Außerdem können Sie die Empfänger mit den folgenden Funktionen besonders schnell angeben.
0CC5-020 Speichern von Empfängern im Adressbuch Die Empfänger können bearbeitet oder gelöscht werden, nachdem sie registriert wurden. Sie können bis zu 200 Empfänger im Adressbuch registrieren. 1 2 3 Drücken Sie oder Drücken Sie . . Drücken Sie . Wenn ein Bildschirm erscheint, in dem Sie zum Eingeben einer PIN aufgefordert werden, geben Sie mit den Zahlentasten die .
Bearbeiten der Angaben für gespeicherte Empfänger Nach dem Speichern von Empfängern können Sie die Angaben für die Empfänger wie Nummer, Name, Typ und Nummer für die kodierte Wahl ändern. 1 2 3 4 5 Drücken Sie oder Drücken Sie . . Wählen Sie mit / die Registerkarte mit dem zu bearbeitenden Empfänger. Wählen Sie mit / den zu bearbeitenden Empfänger, und drücken Sie . Drücken Sie .
0CC5-021 Speichern von Empfängern als Favoriten Sie können die am häufigsten verwendeten Empfänger als Favoriten im Adressbuch speichern. Nach dem Speichern können Empfänger bearbeitet oder gelöscht werden. Sie können bis zu 19 Empfänger als Favoriten speichern. HINWEIS Favoriten wird keine dreistellige Nummer zugewiesen. 1 2 3 Drücken Sie oder Drücken Sie . . Drücken Sie .
Bearbeiten der Angaben für als Favoriten gespeicherte Empfänger Nach dem Speichern von Empfängern können Sie die Angaben für die Empfänger wie Nummer, Name und Typ ändern. 1 2 3 4 5 Drücken Sie oder Drücken Sie . . Wählen Sie mit / die Option < >. Wählen Sie mit / den zu bearbeitenden Empfänger, und drücken Sie . Drücken Sie . Wenn ein Bildschirm erscheint, in dem Sie zum Eingeben einer PIN aufgefordert werden, geben Sie mit den Zahlentasten die .
0CC5-022 Speichern mehrerer Empfänger für die Gruppenwahl Sie können mehrere Empfänger in Gruppen zusammenfassen. Wenn Sie eine Gruppe gespeichert haben, können Sie Empfänger hinzufügen oder löschen. 1 2 3 Drücken Sie oder Drücken Sie . . Drücken Sie . Wenn ein Bildschirm erscheint, in dem Sie zum Eingeben einer PIN aufgefordert werden, geben Sie mit den Zahlentasten die .
Bearbeiten der Angaben für gespeicherte Gruppen Nach dem Speichern von Empfängern können Sie die Angaben für die Gruppen wie Name, Empfänger und Nummer für die kodierte Wahl ändern. 1 2 3 4 5 Drücken Sie oder Drücken Sie . . Wählen Sie mit / die Option < >. Wählen Sie mit / den zu bearbeitenden Empfänger, und drücken Sie . Drücken Sie . Wenn ein Bildschirm erscheint, in dem Sie zum Eingeben einer PIN aufgefordert werden, geben Sie mit den Zahlentasten die .
0CC5-023 Einstellen der Lautstärke Das Gerät gibt in einer Vielzahl von Situationen Signaltöne aus, beispielsweise am Ende des Sendens von Faxen oder bei einem Papierstau oder Fehler. Sie können die Lautstärke der einzelnen Signaltöne getrennt einstellen. 1 2 3 4 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie Wählen Sie , und drücken Sie Wählen Sie eine Einstellung, und drücken Sie Einstellung . . .
0CC5-024 Wechseln in den Schlafmodus Im Schlafmodus wird der Energieverbrauch des Geräts gesenkt, indem die Stromversorgung des Bedienfelds deaktiviert wird. Wenn am Gerät längere Zeit keine Funktionen ausgeführt werden, beispielsweise während der Mittagspause, können Sie Strom sparen, indem Sie auf dem Bedienfeld drücken.
Hörer abnehmen.
0CC5-025 Einstellen der Zeit bis zum automatischen Abschalten (nur MF8540Cdn / MF8230Cn) Sie können das Gerät so einstellen, dass es sich nach einer bestimmten Zeit automatisch ausschaltet. Das Gerät schaltet sich automatisch AUS, wenn nach dem Wechsel in den Schlafmodus die angegebene Zeit lang keine Funktion ausgeführt wurde. Wenn Sie vergessen haben, das Gerät auszuschalten, wird auf diese Weise über Nacht oder an arbeitsfreien Tagen der Stromverbrauch gestoppt.
0CC5-026 Kopieren In diesem Kapitel werden die grundlegenden Kopierfunktionen sowie weitere nützliche Funktionen wie das doppelseitige Kopieren und das Kopieren beider Seiten einer Ausweiskarte auf eine Seite beschrieben.
0CC5-027 Grundlegende Kopierfunktionen 1 2 3 Legen Sie das Dokument oder die Dokumente ein. Drücken Sie Einlegen von Dokumenten . Geben Sie mit den Zahlentasten die Anzahl an Kopien ein. Geben Sie eine Menge zwischen 1 und 99 ein. Drücken Sie 4 , wenn Sie die eingegebene Menge löschen möchten. Legen Sie die gewünschten Kopiereinstellungen fest. Wählen Sie mit 5 Drücken Sie / die Einstellungen. Verschiedene Kopiereinstellungen . Das Kopieren beginnt.
2 Wählen Sie die Papierquelle, die das gewünschte Papier enthält, und drücken Sie . Wenn kein Bildschirm angezeigt wird, fahren Sie mit Schritt 3 fort. 3 Legen Sie das nächste Dokument auf das Vorlagenglas, und drücken Sie . Wiederholen Sie diesen Schritt, bis alle gewünschten Dokumente gescannt wurden. 4 Drücken Sie . HINWEIS: Wenn die Meldung oder im Display angezeigt wird.
0CC5-028 Auswählen von Kopierpapier Geben Sie die Papierquelle an, die das gewünschte Papier enthält, das zum Drucken der Kopien verwendet werden soll. HINWEIS Sie müssen zunächst Format und Typ des in die Papierquelle eingelegten Papiers angeben. Angeben von Papierformat und -typ Einlegen von Papier Wählen Sie die Papierquelle , , MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn < > Wählt das in die manuelle Zufuhr eingelegte Papier.
0CC5-029 Abbrechen des Kopierens Wenn Sie das Kopieren unmittelbar nach dem Drücken der Taste abbrechen möchten, wählen Sie auf dem Bildschirm die Option . Sie können auch zunächst den Kopierstatus prüfen und dann das , oder drücken Sie auf dem Bedienfeld die Taste Kopieren abbrechen.
LINKS Grundlegende Kopierfunktionen 㻝㻝㻠㻌㻛㻌㻢㻤㻝
0CC5-02A Verschiedene Kopiereinstellungen Sie können ganz nach Bedarf eine Vielzahl von Einstellungen auswählen, mit denen Sie beispielsweise Papier sparen oder die Dokumente besser lesbar machen können.
0CC5-02C Vergrößern oder Verkleinern Sie können zum Vergrößern oder Verkleinern von Kopien einen voreingestellten Kopierfaktor wie A4> auswählen oder in Schritten von 1 % einen anwenderdefinierten Kopierfaktor einstellen. Wählen Sie den Kopierfaktor Geben Sie mit / oder den Zahlentasten den Kopierfaktor ein, und drücken Sie . Sie können in Schritten von 1 % einen Kopierfaktor zwischen 25 % und 400 % einstellen.
0CC5-02E Auswählen von Dokumententypen Sie können die optische Bildqualität für die Kopie abhängig vom Dokumententyp auswählen, wie zum Beispiel Nur-Text-Dokumente, Dokumente mit Diagrammen und Grafiken oder Zeitschriftenfotos. Wählen Sie den Dokumententyp Geeignet für das Kopieren von Dokumenten mit Text und Fotos oder Dokumenten, die detaillierte Zeichnungen enthalten, wie Karten.
0CC5-02F Justieren der Dichte Sie können die Dichte der Kopie justieren, wenn Text oder Bilder in einem Dokument zu hell oder zu dunkel sind. Sie können auch den Hintergrund anpassen, wenn Sie bei Dokumenten mit heller oder gelblicher Hintergrundfarbe die Hintergrundfarbe entfernen möchten. HINWEIS Justieren Sie beim Kopieren von auf dünnem Papier gedruckten Dokumenten wie Zeitungen die Dichte und den Hintergrund, damit Text und Bilder der Rückseite in der Kopie nicht sichtbar sind.
LINKS Grundlegende Kopierfunktionen Justieren der Farbabstimmung Justieren der Schärfe 㻝㻝㻥㻌㻛㻌㻢㻤㻝
0CC5-02H Justieren der Farbabstimmung Justiert den Gelb-, Magenta-, Cyan- und Schwarzpegel. Wählen Sie die Farbe Justieren Sie den Farbpegel <–> Macht die ausgewählte Farbe heller. <+> Macht die ausgewählte Farbe dunkler.
0CC5-02J Justieren der Schärfe Sie können die Schärfe des kopierten Bildes anpassen. Erhöhen Sie die Schärfe, um verschwommenen Text und Linien schärfer darzustellen, oder senken Sie die Schärfe, um die Darstellung von Zeitschriftenfotos zu verbessern. Justieren Sie die Schärfe <–> Verringert die Schärfe und schwächt die Kontraste im Bild ab. Beispiel: Wenn Sie das Erscheinungsbild von Fotos aus Magazinen verbessern möchten <+> Erhöht die Bildschärfe.
0CC5-02L Doppelseitiges Kopieren (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Sie können zwei Seiten eines Dokuments auf beide Seiten des Papiers kopieren. Sie können auch ein zweiseitiges Dokument auf beide Seiten des Papiers oder auf zwei getrennte Seiten kopieren. HINWEIS steht bei manchen Papierformaten und -typen möglicherweise nicht zur Verfügung. Papier steht bei Verwendung von oder nicht zur Verfügung.
2->2 Wenn Sie Kopien mit einer anderen Bindung als das Original erstellen möchten Wählen Sie die Ausrichtung des Originals Wählen Sie den Bindungstyp des Wählen Sie für die fertige Kopie einen anderen Bindungstyp als den des Originals Originals 2->1 Mit dieser Einstellung können Sie die Richtung des ausgegebenen Papiers ausrichten. Bei hochformatigen doppelseitigen Dokumenten des Kalendertyps (Bindung an kurzer Seite)
0CC5-02R Kopieren mehrerer Dokumente auf ein Blatt (2 auf 1/4 auf 1) Sie können zwei bis vier Dokumente verkleinert auf ein einziges Blatt kopieren. Dadurch verringert sich die Anzahl der Seiten, und Sie können Papier sparen. HINWEIS Mit <2 auf 1>/<4 auf 1> wird automatisch der Kopierfaktor reduziert (der Kopierfaktor wird im Bildschirm angezeigt).
0CC5-02K Verwenden der Taste [Copy mit Papier sparen] Mit <2 auf 1>/<4 auf 1> können Sie mehrere Dokumente auf ein einziges Blatt kopieren, und mit bietet eine können Sie ein Dokument auf beide Seiten eines Blatts kopieren. Kombination dieser Funktionen und erleichtert das Papiersparen, da Sie nicht beide Funktionen getrennt auswählen müssen.
0CC5-02S Kopieren beider Seiten einer Ausweiskarte auf eine Seite Mit können Sie die Vorder- und Rückseite einer Karte auf eine Seite kopieren. Diese Funktion ist beim Kopieren von Führerscheinen oder Ausweisen hilfreich. HINWEIS steht bei Papier des Formats A4/Letter oder größer zur Verfügung. wird automatisch auf <100%> gesetzt.
0CC5-02U Löschen dunkler Ränder und Rahmenlinien (Rahmenlöschung) Wenn Sie Dokumente kopieren, die kleiner als das Ausgabepapierformat sind, werden möglicherweise an den Rändern des kopierten Bildes Rahmenlinien angezeigt. Wenn Sie gegenüberliegende Seiten eines dicken Buchs kopieren, können dunkle Kanten angezeigt werden. Mit können Sie diese Rahmenlinien und dunklen Kanten löschen. HINWEIS Die Breite des zu löschenden Rahmens vergrößert bzw.
0CC5-02W Sortieren von Kopien nach Seitenreihenfolge Setzen Sie auf , um beim Erstellen mehrerer Kopien mehrseitiger Dokumente die Kopien in Seitenreihenfolge zu sortieren. Diese Funktion ist nützlich, wenn Sie Handzettel für Besprechungen oder Präsentationen vorbereiten. Die Kopien werden seitenweise gruppiert und nicht sortiert.
0CC5-02X Anpassen der Kopiereinstellungen je nach Anforderungen Die Standardeinstellungen sind die Einstellungen, die immer dann angezeigt werden, wenn Sie das Gerät einschalten oder wenn Sie drücken. Wenn Sie Ihre häufig verwendeten Einstellungen als Standardeinstellungen registrieren, müssen Sie nicht jedes Mal die gleichen Einstellungen konfigurieren, wenn Sie Kopien erstellen. Außerdem können Sie Kombinationen mehrerer Kopiereinstellungen registrieren und bei Bedarf verwenden.
0CC5-02Y Ändern von Standardeinstellungen Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Kopieren nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen. Sie den Standardwert der ausgewählten Option Einstellungen Wählen Sie die Option, die Sie einstellen wollen, und ändern Sie den Standardwert.
0CC5-030 Registrieren häufig verwendeter Kopiereinstellungen Sie können bis zu vier häufig verwendete Kombinationen der Kopiereinstellungen registrieren. Indem Sie eine registrierte Einstellungskombination bei Bedarf ganz einfach auswählen, müssen Sie nicht jedes Mal beim Erstellen von Kopien die gleichen Einstellungen konfigurieren, zum Beispiel wenn Sie häufig die Anzahl der Kopien auf 5 setzen, auf einstellen und die Schärfe beim Kopieren erhöhen.
0CC5-031 Faxen Dieses Kapitel beschreibt grundlegende Faxbedienvorgänge und verschiedene andere praktische Funktionen für Ihren Bedarf, wie zum Beispiel das PC-Fax, um Dokumente direkt vom Computer zu senden, das Adressbuch, um ganz einfach Empfänger festzulegen, und die Weiterleitung, um Faxe auch dann zu erhalten, wenn Sie nicht im Büro sind. HINWEIS Faxfunktionen stehen nur beim MF8580Cdw / MF8550Cdn / MF8280Cw zur Verfügung. Sie müssen einige Schritte ausführen, bevor Sie Faxfunktionen nutzen können.
Senden von Faxen nach einem Sprachanruf (manuelles Senden) Senden von Faxen an mehrere Empfänger gleichzeitig (Rundsendung) Weiterleiten von empfangenen Faxen Empfangen von Faxinformationsdiensten Senden von Faxen direkt vom Computer aus Senden von Faxen vom Computer aus (PC-Fax) 㻝㻟㻟㻌㻛㻌㻢㻤㻝 Faxempfang im Speicher (Speicherempfang)
0CC5-032 Senden von Faxen HINWEIS Sie müssen einige Schritte ausführen, bevor Sie Faxfunktionen nutzen können. Faxfunktionen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) 1 2 3 Legen Sie das Dokument oder die Dokumente ein. Drücken Sie Konfigurieren der Anfangseinstellungen für Einlegen von Dokumenten . Geben Sie mit den Zahlentasten den Empfänger ein, und drücken Sie .
3 Geben Sie die Landeskennzahl, die Ortsvorwahl und die Faxnummer ein. 4 Wählen Sie , um am Ende der Faxnummer erforderlichenfalls eine Pause einzufügen, und . drücken Sie Die hier eingefügte Wartezeit beträgt 10 Sekunden. Dieser Wert kann nicht geändert werden. 5 4 Drücken Sie . Legen Sie die gewünschten Scaneinstellungen fest. Wählen Sie mit 5 Drücken Sie / die Einstellungen. Verschiedene Faxeinstellungen (Schwarzweiß), um das Senden zu starten. Das Scannen beginnt.
Die Faxe werden gesendet.
0CC5-033 Abbrechen des Sendens von Faxen Wenn Sie das Senden eines Faxes sofort nach der Betätigung von (Schwarzweiß) abbrechen möchten, drücken Sie Sie können das Versenden von Faxen auch nach der Überprüfung des Faxstatus abbrechen. im Bedienfeld. Abbrechen mit Wenn nach dem Drücken von auf dem Bildschirm eine Liste von Dokumenten angezeigt wird Die Dokumente wurden gescannt und sind zur Verarbeitung bereit. Wählen Sie mit abgebrochen werden soll.
0CC5-034 Verschiedene Faxeinstellungen Es sind zahlreiche Einstellungen nach Ihren Wünschen verfügbar, zum Beispiel, wenn Sie die Dichte oder die Deutlichkeit eines Bildes anpassen möchten.
0CC5-035 Einstellen der Auflösung Sie können die für den jeweiligen Dokumententyp geeignete Auflösung wählen. Bei einer höheren Auflösung wird das Bild klarer, aber das Senden dauert länger. Wählen Sie die Auflösung <200 x 100 dpi (Normal)> Geeignet für reine Textdokumente. <200 x 200 dpi (Fein)> Geeignet für Dokumente mit fein gedrucktem Text. <200 x 200 dpi (Foto)> Geeignet für Dokumente mit Fotos. <200 x 400 dpi (Superfein)> Erzielt eine noch feinere Auflösung als die Einstellung Fein.
0CC5-036 Justieren der Dichte Sie können die Dichte des Faxes justieren, wenn Text oder Bilder in einem Dokument zu hell oder zu dunkel sind. Justieren Sie die Dichte <–> Verringert die Dichte. <+> Erhöht die Dichte.
0CC5-037 Justieren der Schärfe Sie können die Schärfe des Bildes vor dem Senden anpassen. Erhöhen Sie die Schärfe, um verschwommenen Text und Linien schärfer darzustellen, oder senken Sie die Schärfe, um die Darstellung von Zeitschriftenfotos zu verbessern. Justieren Sie die Schärfe <–> Verringert die Schärfe und schwächt die Kontraste im Bild ab. Beispiel: Wenn Sie das Erscheinungsbild von Fotos aus Magazinen verbessern möchten <+> Erhöht die Bildschärfe.
0CC5-038 Scannen doppelseitiger Dokumente (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Das Gerät kann automatisch die Vorder- und Rückseite von Dokumenten in der Zufuhr scannen. WICHTIG Legen Sie die Dokumente in die Zufuhr ein. Wenn die Dokumente auf das Vorlagenglas gelegt werden oder wenn das manuelle Senden eingestellt ist, können nicht beide Seiten automatisch gescannt werden.
0CC5-039 Angeben von Empfängern für Faxe Sie können Empfänger über die Zahlentasten festlegen oder indem Sie sie aus dem Adressbuch auswählen. Zur Verwendung des Adressbuchs müssen Sie die Ziele zuvor im Adressbuch registrieren. Sie können auch zuvor verwendete Empfänger angeben. Wenn in Ihrem Büro ein LDAP-Server installiert ist, können Sie auch Empfänger auf dem Server angeben.
0CC5-03A Angeben mit Zahlentasten (Fax) Geben Sie Empfänger mit den Zahlentasten auf dem Bedienfeld an. WICHTIG Wenn auf gesetzt ist, können Sie mit den Zahlentasten keine Empfänger angeben. Einschränken der verfügbaren Empfänger 1 2 Drücken Sie . Geben Sie mit den Zahlentasten den Empfänger ein, und drücken Sie . Wenn Sie bei der Eingabe einen Fehler gemacht haben, drücken Sie .
HINWEIS Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 wählen, können Sie mit / zwischen den angegebenen Empfängern umschalten. Rufen Sie den Empfänger auf, den Sie löschen möchten, und drücken Sie .
0CC5-03C Angeben aus dem Adressbuch (Fax) Im Adressbuch können Sie einen Empfänger aus der Liste der gespeicherten Empfänger auswählen oder unter den Empfängern, für die ein Name gespeichert ist, nach einem Namen suchen. Außerdem können Sie einen Empfänger direkt über die dem Empfänger zugewiesene dreistellige Nummer (Nummer für die kodierte Wahl) angeben.
4 HINWEIS: Wenn Sie mehrere Empfänger angeben möchten Wiederholen Sie Schritt 2 bis 4. Sie können bis zu 200 Empfänger angeben. Wählen Sie mit / die Option , und drücken Sie weitere Empfänger angeben möchten. , wenn Sie mit den Zahlentasten So löschen Sie Empfänger Wenn Sie mehrere Empfänger angegeben haben, können Sie sie nötigenfalls auch wieder löschen.
Sie können auch mit 3 / auf dem Bildschirm die Option <Über Kodierte Wahl definieren> wählen und dann drücken. Geben Sie mit den Zahlentasten eine dreistellige Nummer (001 bis 181) ein. Wenn Sie bei der Eingabe einen Fehler gemacht haben, drücken Sie . (Drücken Sie die Taste einmal, um je ein Zeichen zu löschen, und halten Sie sie gedrückt, um alle eingegebenen Zeichen auf einmal zu löschen.
Bevor Sie in Schritt 1 wählen, können Sie mit / zwischen den angegebenen Empfängern umschalten. Rufen Sie den Empfänger auf, den Sie löschen möchten, und drücken Sie .
0CC5-03E Angeben von zuvor verwendeten Empfängern (Fax) Sie können einen Empfänger aus den drei zuletzt verwendeten Empfängern auswählen. Wenn Sie einen zuvor verwendeten Empfänger angeben, gelten dieselben Faxeinstellungen, wie die Dichte, die beim letzten Senden von Dokumenten an diesen Empfänger eingestellt waren. WICHTIG Wenn auf gesetzt ist, können Sie diese Funktion nicht verwenden.
0CC5-03F Angeben von auf einem LDAP-Server gespeicherten Empfängern (Fax) Wenn im Büro ein LDAP-Server installiert ist, können Sie auf dem Server gespeicherte Empfänger verwenden. Greifen Sie dazu über das Gerät auf den LDAP-Server zu, und suchen Sie den Empfänger. HINWEIS Sie müssen vorab die Einstellungen für die Verbindung zu dem LDAP-Server vornehmen. Speichern von LDAP-Servern (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) 1 2 Drücken Sie Wählen Sie mit .
7 Geben Sie das Suchverfahren an, und drücken Sie . Sucht die Empfänger, die allen in Schritt 4 und 5 angegebenen Suchkriterien entsprechen, und zeigt diese an. Alle Empfänger, die einem der in Schritt 4 und 5 angegebenen Suchkriterien entsprechen, werden als Suchergebnis angezeigt. 8 Drücken Sie . Die Empfänger, die den Suchkriterien entsprechen, werden angezeigt.
3 Drücken Sie , wählen Sie , und drücken Sie . HINWEIS Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 wählen, können Sie mit / zwischen den angegebenen Empfängern umschalten. Rufen Sie den Empfänger auf, den Sie löschen möchten, und drücken Sie .
0CC5-03H Ändern von Standardeinstellungen Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Senden von Faxen nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen.
0CC5-03J Empfangen von Faxen In diesem Abschnitt werden die Methoden zum Empfangen von Faxen und die Konfiguration des Geräts für den Empfang von Faxen beschrieben. Sie müssen einige Schritte für die Verwendung der Faxfunktionen ausführen, bevor Sie die Empfangseinstellungen festlegen. Konfigurieren der Anfangseinstellungen für Faxfunktionen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) HINWEIS Das Gerät kann empfangene Faxdokumente auf Papier im A4- oder Letter-Format drucken.
empfangen werden. Wenn Sie den Hörer abnehmen und ein Faxerkennungston zu hören ist, handelt es sich um einen Faxanruf. Sie können das Fax empfangen, indem Sie über das Telefon einfach eine bestimmte ID-Nummer eingeben. Empfangen von Faxen über ein Telefon (Fernempfang) Konfiguration des Geräts für den Faxempfang 1 2 3 Drücken Sie Wählen Sie mit . / die Option , und drücken Sie Wählen Sie die Empfangsmethode, und drücken Sie . .
1 2 Nehmen Sie den Hörer des Telefons ab, wenn das Telefon klingelt. Wenn Sie einen Faxerkennungston hören, geben Sie über das Telefon die ID-Nummer für den Fernempfang ein. Die ID-Nummer ist standardmäßig auf 25 eingestellt. Sie können diese Nummer gegebenenfalls ändern. 3 Legen Sie den Hörer auf.
0CC5-03K Senden und Empfangen von Faxen je nach Verwendungszweck Zusätzlich zu den grundlegenden Sende- und Empfangsmethoden steht eine Vielzahl weiterer Möglichkeiten zur Verfügung, die Sie je nach Verwendungszweck nutzen können.
0CC5-03L Senden von Faxen nach einem Sprachanruf (manuelles Senden) Sie können nach einem Sprachanruf manuell Faxe senden. Wenn Sie einen Faxerkennungston hören, versucht (Schwarzweiß), um die Faxe zu senden. der Empfänger, den Faxempfang zu starten. Drücken Sie HINWEIS Sie müssen vorab ein Telefon oder den optionalen Hörer an das Gerät anschließen. 1 Legen Sie das Dokument oder die Dokumente ein.
0CC5-03R Senden von Faxen an mehrere Empfänger gleichzeitig (Rundsendung) Sie können Faxe an bis zu 210 Empfänger gleichzeitig senden. Wählen Sie mit den Zahlentasten * oder über das Adressbuch mehrere Empfänger aus. Wenn im Büro ein LDAP-Server * installiert ist, können Sie auch über das Gerät auf den Server zugreifen und dort bis zu 10 Empfänger angeben. * Die maximale Anzahl der Ziele, die Sie festlegen können, wenn Sie einen LDAP-Server oder die Zahlentasten verwenden, ist jeweils 10.
0CC5-03S Faxempfang im Speicher (Speicherempfang) Sie können Faxe beim Empfang im Gerät speichern, ohne sie zu drucken. Die gespeicherten Dokumente können später jederzeit gedruckt werden, und Sie können vor dem Drucken nicht benötigte Dokumente wie Werbesendungen löschen und so Papier sparen. Diese Funktion ist auch beim Drucken vertraulicher Dokumente nützlich, da Sie so vermeiden können, dass unbefugte Personen die Dokumente versehentlich einsehen.
automatisch gedruckt. Speicherempfang>
LINKS Empfangen von Faxen Überprüfen von Status und Log für gesendete und empfangene Dokumente 㻝㻢㻟㻌㻛㻌㻢㻤㻝
0CC5-03U Weiterleiten von empfangenen Faxen Sie können empfangene Dokumente an andere Empfänger weiterleiten. Sie können ein Dokument aus den gespeicherten Dokumenten auswählen und nur dieses weiterleiten oder das Gerät so einstellen, dass alle empfangenen Dokumente an die angegebenen Empfänger weitergeleitet werden. Als Empfänger für die Weiterleitung können Sie Faxnummern ebenso wie E-Mail-Adressen und gemeinsame Ordner angeben.
0CC5-03W Auswählen eines weiterzuleitenden Dokuments Das Gerät leitet das Dokument weiter, das Sie aus allen gespeicherten Dokumenten auswählen. Wenn Sie diese Funktion nutzen Faxempfang im Speicher (Speicherempfang) möchten, aktivieren Sie zunächst den Speicherempfang. HINWEIS Solange Sie den Speicherempfang nicht deaktivieren, werden die gespeicherten Dokumente nach der Weiterleitung nicht gelöscht. Sie können dieselben Dokumente also mehrmals weiterleiten.
0CC5-03X Automatisches Weiterleiten aller empfangenen Dokumente Das Gerät kann alle empfangenen Dokumente an die angegebenen Empfänger weiterleiten. So können Sie jederzeit überall Faxe erhalten, auch wenn Sie nicht im Büro sind.
Speichern von Dokumenten, die nicht weitergeleitet werden konnten speichern> Drucken/Neusenden/Löschen von gespeicherten Dokumenten 1 2 3 Drücken Sie Wählen Sie mit (Status Monitor). / die Option , und drücken Sie Wählen Sie das Dokument, das Sie prüfen wollen, und drücken Sie So drucken Sie das geprüfte Dokument 1 Drücken Sie .
So senden Sie das geprüfte Dokument neu 1 Drücken Sie . 2 Wählen Sie , und drücken Sie 3 Wählen Sie den Empfänger für die Weiterleitung aus dem Adressbuch, und drücken Sie . Anweisungen zum Verwenden des Adressbuchs finden Sie in Angeben aus dem Adressbuch (Fax). So löschen Sie das geprüfte Dokument 1 Drücken Sie . 2 Wählen Sie , und drücken Sie .
0CC5-03Y Empfangen von Faxinformationsdiensten Über Faxinformationsdienste stellen Unternehmen und Organisationen eine Vielzahl von hilfreichen Informationen zu Arbeit und Freizeit zur Verfügung. In diesem Abschnitt wird das übliche Verfahren zum Empfangen solcher Dienste beschrieben. HINWEIS Je nach Dienst kann sich das Vorgehen von dem hier beschriebenen unterscheiden. Führen Sie die für den jeweiligen Dienst nötigen Schritte aus. 1 2 Drücken Sie . Drücken Sie .
LINKS Empfangen von Faxen 㻝㻣㻜㻌㻛㻌㻢㻤㻝
0CC5-040 Überprüfen von Status und Log für gesendete und empfangene Dokumente Die Statusinformationen und Kommunikationslogs für gesendete und empfangene Faxdokumente können getrennt angezeigt werden. Sie können detaillierte Informationen zu den Dokumenten anzeigen, einschließlich der Empfänger und der Anzahl der Seiten, und nicht benötigte Dokumente löschen. WICHTIG Wenn auf gesetzt ist, können Sie die Kommunikationslogs nicht anzeigen.
2 Wählen Sie das Dokument, dessen Log Sie anzeigen wollen, und drücken Sie . / Zeigt eine Liste der Dokumente an, die gesendet und empfangen wurden. wird angezeigt, wenn ein Dokument erfolgreich gesendet oder empfangen wurde, wird angezeigt, wenn ein Dokument aufgrund eines Abbruchs oder Fehlers nicht gesendet oder empfangen wurde. Zeigt detaillierte Informationen zum in der Liste ausgewählten Dokument an.
0CC5-041 Senden von Faxen vom Computer aus (PC-Fax) Sie können in einer Computeranwendung erstellte Faxdokumente direkt vom Computer aus senden. So brauchen Sie Dokumente für das Faxen nicht mehr auszudrucken und können Papier sparen.
0CC5-042 Senden von PC-Faxen WICHTIG Wenn auf gesetzt ist, können Sie keine Faxe vom Computer aus senden. Unterbinden von PC-Faxen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Sie müssen im verwendeten Faxtreiber die Verwaltung per Abteilungs-IDs aktivieren, wenn die Verwaltung per Abteilungs-IDs am Gerät aktiviert ist. Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Faxtreiberbildschirm auf [Hilfe].
die Option [Geben Sie die Faxnummer erneut ein, bevor Sie ein Ziel zur "Zielliste" hinzufügen] gewählt haben, wird ein Dialogfeld für die erneute Eingabe der Faxnummer angezeigt, sobald Sie auf [Zu Zielliste hinzufügen] klicken. Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Faxtreiberbildschirm auf [Hilfe]. 4 5 Fügen Sie bei Bedarf ein Deckblatt zum Dokument hinzu. Klicken Sie auf [OK], um das Dokument zu senden.
0CC5-043 Hinzufügen von Deckblättern zu PC-Faxen Sie können zu dem Dokument, das Sie senden, ein Deckblatt hinzufügen. Wählen Sie eins der drei im Faxtreiber vordefinierten Deckblätter, oder erstellen Sie eigene Deckblätter. Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Faxtreiberbildschirm auf [Hilfe]. 1 Öffnen Sie in einer Anwendung ein Dokument, und rufen Sie das Druckdialogfeld auf. Wie Sie das Druckdialogfeld aufrufen, hängt von der jeweiligen Anwendung ab.
Registerkarte [Absender] Wählen Sie aus, welche Informationen zum Absender eingefügt werden sollen, und geben Sie die Informationen ein. Registerkarte [Ziel] Wählen Sie die Empfänger, die Sie aufnehmen möchten, und geben Sie die Informationen ein. Empfängernamen, Firmennamen, Abteilungsnamen und Faxnummern, die Sie auf der Registerkarte [Einstellungen für das Senden] angegeben haben ( Senden von PC-Faxen), werden in das Deckblatt eingefügt.
[Anzahl der zu sendenden Blätter einfügen] Aktivieren Sie dieses Kontrollkästchen, wenn die Anzahl der zu sendenden Blätter auf dem Deckblatt enthalten sein soll, und geben Sie die Anzahl der Blätter in [Anzahl der zu sendenden Blätter] an. Die Anzahl der zu sendenden Blätter wird nicht automatisch ermittelt. In das Deckblatt wird der Wert, den Sie hier eingeben, eingefügt.
0CC5-044 Verwenden des Adressbuchs Nachdem Sie häufig verwendete Empfänger für PC-Faxe im Adressbuch gespeichert haben, können Sie sie beim Senden von PC-Faxen mühelos auswählen. Außerdem können Sie mit Anwendungen wie Microsoft Excel erstellte Adressbuchdaten im CSV-Format in das Gerät importieren oder die Adressbuchdaten in eine Datei exportieren und dann für ein anderes Faxgerät oder in anderen Anwendungen verwenden.
0CC5-045 Speichern von Empfängern In diesem Abschnitt wird beschrieben, wie Sie Empfänger im Adressbuch für PC-Faxe speichern. Sie können einzelne Empfänger aus den im Adressbuch gespeicherten Empfängern auswählen und zu einer Empfängergruppe zusammenfassen (Gruppenwahl) und dann ganz komfortabel Faxe an mehrere Empfänger auf einmal senden. Speichern von Empfängern Speichern mehrerer Empfänger als Empfängergruppe (Gruppenwahl) HINWEIS Insgesamt können 6.000 Empfänger gespeichert werden: 3.
klicken Sie auf [Bearbeiten] oder [Löschen]. 4 Stellen Sie die einzelnen Einstellungen ein, und klicken Sie auf [OK]. Adresse Geben Sie den Empfängernamen, den Firmennamen und den Abteilungsnamen ein. [Faxnummer] Geben Sie eine Faxnummer oder mehrere Faxnummern ein. Falls erforderlich, können Sie zwischen die Ziffern Bindestriche einfügen. Wenn Sie Erläuterungen wie "Privat" oder "Geschäftlich" zu den Faxnummern hinzufügen möchten, geben Sie diese Angaben in [Beschreibung] ein.
HINWEIS: Wenn Sie gespeicherte Empfänger bearbeiten oder löschen wollen, wählen Sie den Empfänger aus dem [Adressbuch] aus, und klicken Sie auf [Bearbeiten] oder [Löschen]. 4 Stellen Sie die einzelnen Einstellungen ein, und klicken Sie auf [OK]. [Gruppenname] Geben Sie einen Gruppennamen wie "Vertriebsabteilung 1" ein. [Anzeigen] Wählen Sie aus, welcher Typ von Empfängern in der Liste [Verfügbare Ziele] angezeigt werden soll, aus der Sie die für die Gruppenwahl zu speichernden Empfänger auswählen können.
0CC5-046 Verwenden von gespeicherten Empfängern In diesem Abschnitt wird beschrieben, wie Sie im Adressbuch gespeicherte Empfänger angeben. Speichern von Empfängern HINWEIS Sie können das Adressbuch nicht verwenden, wenn Sie keine Berechtigung für den Zugriff auf den Ordner haben, in dem das Adressbuch gespeichert ist. Melden Sie sich als ein Benutzer an, der über die Berechtigung für den Zugriff auf den Ordner verfügt, oder ändern Sie den Speicherort für das Adressbuch.
Wenn Sie mehrere Empfänger angeben wollen, wiederholen Sie Schritt 3 und 4.
0CC5-047 Importieren/Exportieren von Adressbuchdaten Sie können mit Anwendungen wie Microsoft Excel erstellte Adressbuchdaten im CSV-Format in das Gerät importieren oder die Adressbuchdaten in eine Datei exportieren und dann für ein anderes Faxgerät oder in anderen Anwendungen verwenden. Das Gerät unterstützt zwei Dateiformate: CSV-Dateien (*.csv) und Canon Adressbuchdateien (*.abk).
Geben Sie bei einer CSV-Datei die in der Datei verwendeten Trennzeichen an. Die aus der Datei importierten Empfänger werden im [Adressbuch] angezeigt. Exportieren von Adressbuchdaten 1 2 3 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners Klicken Sie mit der rechten Maustaste auf das Faxsymbol, und klicken Sie dann auf [Druckeinstellungen]. Klicken Sie auf die Registerkarte [Adressbuch bearbeiten] 㻝㻤㻢㻌㻛㻌㻢㻤㻝 [Exportieren].
HINWEIS: Wenn Sie in dem Dialogfeld, das angezeigt wird, wenn Sie auf der Registerkarte [Spezial] auf [Sicherheitseinstellungen] klicken, die Option [Beim Exportieren von Adressliste durch Passwort schützen] gewählt haben, wird ein Dialogfeld für die Eingabe eines Passworts angezeigt, sobald Sie auf [Exportieren] klicken. Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Faxtreiberbildschirm auf [Hilfe].
3 Klicken Sie auf die Registerkarte [Adressbuch bearbeiten] 4 Geben Sie den Speicherort für die Adressbuchdaten an, und klicken Sie auf [OK]. [Einen Ordner definieren]. HINWEIS: Speichern Sie die Adressbuchdaten in einem Ordner wie [Eigene Dokumente], für den Sie über Schreibberechtigung verfügen. 5 Klicken Sie auf [Neu], wenn Sie ein neues Adressbuch erstellen möchten, oder auf [Kopieren], um ein vorhandenes Adressbuch in den angegebenen Ordner zu kopieren.
㻝㻤㻥㻌㻛㻌㻢㻤㻝
0CC5-048 Verwenden des Geräts als Drucker Sie haben verschiedene Möglichkeiten, das Gerät als Drucker zu verwenden. Sie können mithilfe des Druckertreibers Dokumente auf dem Computer, Bilddateien von einem USB-Speichergerät oder mithilfe von Google Cloud Print oder AirPrint™ von tragbaren Geräten drucken. Nutzen Sie die vielen Druckfunktionen ganz nach Bedarf. Drucken von einem Computer Sie können mithilfe des Druckertreibers ein auf dem Computer erstelltes Dokument ausdrucken.
0CC5-049 Drucken von einem Computer Sie können mit einer Anwendung auf dem Computer erstellte Dokumente mithilfe des Druckertreibers drucken. Der Druckertreiber verfügt über nützliche Einstellungen wie Vergrößern/Verkleinern und doppelseitigen Druck, sodass Sie Ihre Dokumente auf unterschiedlichste Art ausdrucken können. Bevor Sie diese Funktion nutzen können, müssen Sie jedoch einige Schritte ausführen, beispielsweise den Druckertreiber auf dem Computer installieren.
㻝㻥㻞㻌㻛㻌㻢㻤㻝
0CC5-04C Drucken von Dokumenten In diesem Abschnitt wird beschrieben, wie Sie mithilfe des Druckertreibers Dokumente auf dem Computer ausdrucken. 1 Öffnen Sie in einer Anwendung ein Dokument, und rufen Sie das Druckdialogfeld auf. Wie Sie das Druckdialogfeld aufrufen, hängt von der jeweiligen Anwendung ab. Weitere Informationen dazu finden Sie im Handbuch zur verwendeten Anwendung. 2 Wählen Sie den Druckertreiber für das Gerät, und klicken Sie auf [Einstellungen] (bzw. [Eigenschaften]).
4 Klicken Sie auf [Drucken] (oder [OK]). Der Druckvorgang startet. Bei einigen Anwendungen wird ein Bildschirm wie der unten dargestellte angezeigt. Um den Druckvorgang abzubrechen, klicken Sie auf [Abbrechen], wenn der oben dargestellte Bildschirm angezeigt wird. Nachdem der Bildschirm ausgeblendet wurde oder wenn der Bildschirm nicht angezeigt wird, können Sie den Druckvorgang auf Abbrechen des Druckens andere Arten abbrechen.
0CC5-04E Abbrechen des Druckens Sie können das Drucken vom Computer aus oder auf dem Bedienfeld des Geräts abbrechen. Am Computer Auf dem Bedienfeld Am Computer Sie können den Druckvorgang über das Druckersymbol abbrechen, das in der Taskleiste auf dem Desktop angezeigt wird. 1 Doppelklicken Sie auf das Druckersymbol.
Auf dem Bedienfeld Brechen Sie das Drucken mit oder (Status Monitor) ab. Abbrechen mit Wenn nach dem Drücken von Wählen Sie mit Abbrechen mit / auf dem Bildschirm eine Liste von Dokumenten angezeigt wird das Dokument, bei dem der Vorgang abgebrochen werden soll. (Status Monitor) (Status Monitor) Kopier/Druckauftrag> das Dokument HINWEIS Nach dem Druckabbruch werden möglicherweise einige Seiten ausgegeben.
0CC5-04F Anzeigen des Druckstatus und des Logs Sie können den aktuellen Druckstatus und die Logs für gedruckte Dokumente anzeigen. Nützlich in folgenden Situationen Wenn Ihre Dokumente lange nicht gedruckt werden, können Sie die Warteschlange der zu druckenden Dokumente anzeigen. Wenn Sie vermeintlich gedruckte Ausdrucke nicht finden können, sehen Sie nach, ob ein Fehler aufgetreten ist. 1 2 3 Drücken Sie (Status Monitor). Wählen Sie mit / die Option , und drücken Sie .
Zeigt eine Liste der Dokumente an, die gedruckt wurden. wird angezeigt, wenn ein Dokument erfolgreich gedruckt wurde, wird angezeigt, wenn ein Dokument aufgrund eines Abbruchs oder Fehlers nicht gedruckt wurde. Zeigt detaillierte Informationen zum in der Liste ausgewählten Dokument an. Der angezeigte Dokumenten- oder Benutzername entspricht möglicherweise nicht dem tatsächlichen Dokumenten- oder Anwendername.
0CC5-04H Verschiedene Druckeinstellungen Es gibt eine Vielzahl von Einstellungen für Ihre Anforderungen, beispielsweise Vergrößern/Verkleinern und doppelseitigen Druck.
0CC5-04J Vergrößern oder Verkleinern Sie können zum Erstellen vergrößerter oder verkleinerter Ausdrucke einen voreingestellten Druckfaktor wie A5 bis A4 auswählen oder in Schritten von 1 % einen anwenderdefinierten Druckfaktor einstellen. Einstellen des Druckfaktors durch Angabe von Originaldokumenten- und Papierformat (voreingestellter Faktor) Der Druckfaktor wird auf der Grundlage des Dokumenten- und des Papierformats, die Sie eingestellt haben, automatisch eingestellt.
LINKS Drucken von Dokumenten 㻞㻜㻝㻌㻛㻌㻢㻤㻝
0CC5-04K Wechseln zwischen einseitigem und doppelseitigem Druck (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Beim MF8580Cdw / MF8550Cdn / MF8540Cdn können Sie ein- und doppelseitige Ausdrucke erstellen. Die Standardeinstellung ist [Doppelseitiger Druck]. Ändern Sie die Einstellung nach Bedarf. HINWEIS Das doppelseitige Drucken steht bei manchen Papierformaten und -typen möglicherweise nicht zur Verfügung.
LINKS Drucken von Dokumenten Drucken mehrerer Seiten auf ein Blatt Drucken einer Broschüre (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) 㻞㻜㻟㻌㻛㻌㻢㻤㻝
0CC5-04L Sortieren von Ausdrucken nach Seitenreihenfolge Wählen Sie [Sortieren], um beim Drucken mehrerer Kopien mehrseitiger Dokumente ganze Sätze in Seitenreihenfolge zu sortieren. Diese Funktion ist nützlich, wenn Sie Handzettel für Besprechungen oder Präsentationen vorbereiten.
0CC5-04R Drucken mehrerer Seiten auf ein Blatt Sie können mehrere Seiten auf ein Blatt drucken. Beispielsweise können Sie mit [4 auf 1] oder [9 auf 1] vier bzw. neun Seiten auf ein Blatt drucken. Diese Funktion ist nützlich, wenn Sie Papier sparen oder die Dokumente als Miniaturbilder drucken wollen. HINWEIS Sie können noch mehr Papier sparen, wenn Sie diese Einstellung mit dem doppelseitigen Druck kombinieren.
0CC5-04S Drucken von Postern Sie können eine Seite eines Dokuments auf mehreren Seiten verteilt ausdrucken. Wenn Sie beispielsweise ein aus einer Seite bestehendes Dokument im A4-Format um das Neunfache vergrößert drucken, erhalten Sie nach dem Drucken des Dokuments und Zusammenfügen der Ausdrucke ein Poster aus 3x3 Seiten im A4Format. Registerkarte [Grundeinstellungen] 2]]) [OK] Wählen Sie in [Seitenlayout] die gewünschte Größe des Posters (z. B.
0CC5-04U Drucken einer Broschüre (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Sie können zwei Seiten eines Dokuments auf jeder Seite des Papiers drucken und die gedruckte Seiten dann in der Mitte falten, um eine Broschüre zu erhalten. Der Druckertreiber steuert die Druckreihenfolge so, dass die Seitenzahlen richtig angeordnet sind. HINWEIS Der Broschürendruck ist bei einigen Papierformaten und -arten möglicherweise nicht verfügbar. Das Papier, das für den Papier.
Broschüre fest. Aktivieren Sie das Kontrollkästchen [Heftrand/Druckrand einstellen], und legen Sie in [Heftrand/Druckrand] die Randbreite fest.
0CC5-04W Drucken von Rahmen Sie können Rahmen wie unterbrochene Linien oder Doppellinien an den Rändern der Ausdrucke hinzufügen. Registerkarte [Seite einrichten] [OK] Klicken Sie auf [Seitenoptionen] [Rahmen] Wählen Sie den Rahmentyp. Vorschau Zeigt eine Vorschau mit dem ausgewählten Rahmen an.
0CC5-04X Drucken von Datumsangaben und Seitenzahlen Sie können die Informationen, wie Datumsangaben oder Seitenzahlen, drucken und festlegen, wo diese Informationen auf dem Dokument gedruckt werden sollen (oben links, unten rechts usw.). Registerkarte [Seite einrichten] Anwendername oder Seitenzahl Klicken Sie auf [Seitenoptionen] [OK] [OK] Wählen Sie die Druckposition von Druckdatum, [Datum drucken] Legen Sie die Position fest, an der das Druckdatum gedruckt werden soll.
0CC5-04Y Drucken von Wasserzeichen Sie können Wasserzeichen wie "KOPIE" und "VERTRAULICH" über das Dokument hinweg drucken. Dazu können Sie neue Wasserzeichen erstellen oder voreingestellte Wasserzeichen verwenden.
LINKS Drucken von Dokumenten Drucken von Rahmen Drucken von Datumsangaben und Seitenzahlen 㻞㻝㻞㻌㻛㻌㻢㻤㻝
0CC5-050 Einstellen des Farbmodus Sie können einen Farbmodus wählen (Farbe oder Schwarzweiß). Wenn ein Dokument Seiten in Farbe und in Schwarzweiß enthält und Sie die Automatik einstellen, werden Farbseiten farbig und Schwarzweißseiten automatisch schwarzweiß gedruckt. Registerkarte [Grundeinstellungen] Wählen Sie in [Farbmodus] den Farbmodus [OK] [Farbmodus] Wählen Sie [Schwarzweiß] oder [Farbe]. Wenn Sie [Auto [Farbe/S&W]] wählen, wird der Farbmodus Seite für Seite automatisch festgelegt.
HINWEIS Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Druckertreiberbildschirm auf [Hilfe].
0CC5-051 Angeben der Papierquelle Wenn Sie auf einem bestimmten Papier drucken wollen, geben Sie die Papierquelle an, in die das gewünschte Papier eingelegt ist. HINWEIS Geben Sie vor dem Drucken Format und Typ des in die Papierquelle eingelegten Papiers an.
Wenn Sie bestimmtes Papier für bestimmte Seiten verwenden möchten, wählen Sie, wie im oben beschriebenen Beispiel, [Papierzufuhr]. [Papierauswahl] Legen Sie fest, wie Papier festgelegt wird, wie zum Beispiel [Anderes Papier für Deckblätter und andere Seiten] * oder [Anderes Papier für erste, andere und letzte Seiten]. Legen Sie außerdem fest, welches Papier für die Deckblätter und die restlichen Seiten verwendet werden soll.
0CC5-052 Auswählen von Dokumententypen Sie können den Dokumententyp festlegen und so für eine optimale Druckqualität sorgen. Es gibt verschiedene Einstellungen für Fotodokumente, Dokumente mit Diagrammen oder Grafiken und Dokumente mit EntwurfZeichnungen mit feinen Linien. Registerkarte [Qualität] Wählen Sie in [Dokument] den Dokumententyp aus [OK] [Dokument] Wählen Sie eine Option, die für den Dokumententyp oder den Druckzweck geeignet ist.
0CC5-053 Sparen von Toner Sie können den Druckertreiber so einstellen, dass die Dokumente mit weniger Toner ausgedruckt werden. WICHTIG Wenn die Einstellung für das Tonersparen aktiviert ist, sind feine Linien und Bereiche mit geringerer Druckdichte möglicherweise verschwommen.
0CC5-054 Zusammenfassen und Drucken mehrerer Dokumente Mit Canon PageComposer können Sie mehrere Dokumente zu einem Druckauftrag zusammenfassen und diesen mit bestimmten Druckeinstellungen drucken. Mit dieser Funktion können Sie beispielsweise Dokumente, die mit unterschiedlichen Anwendungen erstellt wurden, zusammenfassen und alle Seiten im selben Papierformat drucken. 1 Öffnen Sie in einer Anwendung ein Dokument, und rufen Sie das Druckdialogfeld auf.
5 Gehen Sie für alle Dokumente, die Sie zusammenfassen wollen, wie in Schritt 1 bis 4 erläutert vor. Die Dokumente werden zu Canon PageComposer hinzugefügt. 6 Wählen Sie aus der Liste [Dokumentname] die zusammenzufassenden Dokumente aus, und klicken Sie auf . Zum Auswählen mehrerer Dokumente halten Sie Taste [UMSCHALT] oder die Taste [STRG] gedrückt, und klicken Sie auf die Dokumente. 7 Ändern Sie gegebenenfalls die Einstellungen, und klicken Sie auf [Kombinieren].
Wenn Sie weitere Informationen benötigen, klicken Sie auf dem Canon PageComposer-Bildschirm auf [Hilfe]. [Details] Ruft den Bildschirm mit den Druckeinstellungen des Druckertreibers auf. Es stehen weniger Einstellungen zur Verfügung als beim normalen Drucken. 8 Wählen Sie aus der Liste [Dokumentname] den Druckauftrag für das zu druckende zusammengefasste Dokument, und klicken Sie auf . Das Drucken beginnt.
0CC5-055 Konfigurieren von Druckereinstellungen am Gerät Beim Drucken eines Dokuments von einem Computer aus können Sie in der Anwendung, in der Sie das Dokument erstellt haben, oder im Druckertreiber viele Druckeinstellungen wie die Anzahl der Kopien oder den Farbmodus festlegen. Allerdings kann die unten beschriebene Einstellung nur am Gerät festgelegt werden.
0CC5-056 Drucken eines mit einer PIN geschützten Dokuments (Geschützter Druck) (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Wenn Sie von einem Computer aus drucken und für ein Dokument eine PIN definieren, bleibt das Dokument im Gerät gespeichert und wird erst gedruckt, wenn die richtige PIN am Bedienfeld des Geräts eingegeben wird. Diese Funktion wird als "Geschützter Druck" bezeichnet, das mit einer PIN gesicherte Dokument als "geschütztes Dokument.
0CC5-057 Vorbereitungen für den geschützten Druck Stellen Sie sicher, dass der geschützte Druck beim Druckertreiber aktiviert ist. WICHTIG Melden Sie sich für die folgenden Schritte als Benutzer mit Administratorrechten am Computer an. 1 2 3 Öffnen Sie den Druckerordner. Anzeigen des Druckerordners Klicken Sie mit der rechten Maustaste auf das Druckersymbol, und klicken Sie dann auf [Druckereigenschaften] (bzw. [Eigenschaften]).
0CC5-058 Drucken mit der Funktion für geschützten Druck In diesem Abschnitt wird beschrieben, wie Sie ein Dokument von einer Anwendung aus als geschütztes Dokument drucken. Im ersten Teil des Abschnitts wird dabei erläutert, wie Sie ein geschütztes Dokument an das Gerät senden, im zweiten Teil, wie Sie das geschützte Dokument am Gerät ausdrucken.
4 Legen Sie die Druckeinstellungen fest, und klicken Sie auf [OK]. Klicken Sie auf die Registerkarte [Grundeinstellungen], [Seite einrichten], [Endverarbeitung], [Papierzufuhr] oder [Qualität], um Verschiedene Druckeinstellungen gegebenenfalls die entsprechenden Druckeinstellungen vorzunehmen. 5 Klicken Sie auf [Drucken] (oder [OK]). 6 Überprüfen Sie den Dokumentennamen, den Benutzernamen und die PIN, und klicken Sie auf [OK].
Wenn Sie das geschützte Dokument an das Gerät gesendet haben, bleibt es bis zum Drucken im Gerät gespeichert. Ausdrucken geschützter Dokumente Wenn Sie das geschützte Dokument an das Gerät gesendet haben, drucken Sie es innerhalb von 30 Minuten. Danach wird das geschützte Dokument aus dem Speicher des Geräts gelöscht und kann nicht mehr gedruckt werden.
Werkseitig ist das Gerät so eingestellt, dass geschützte Dokumente 30 Minuten nach dem Empfang gelöscht werden, wenn sie noch nicht gedruckt wurden, Sie können diese Einstellung aber ändern. 1 2 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie .
0CC5-059 Anpassen der Druckeinstellungen je nach Anforderungen Sie können Einstellungskombinationen als "Profile" registrieren, die Ihren verschiedenen Druckansprüchen entsprechen. Außerdem können Sie häufig verwendete Einstellungen als Standardeinstellung registrieren. Wenn die Standardeinstellung festgelegt wurde, werden die registrierten Einstellungen automatisch im Druckertreiberbildschirm angezeigt, und Sie können den Vorgang zur Festlegung der Druckeinstellungen überspringen und sofort drucken.
0CC5-05A Speichern von Kombinationen häufig benutzter Druckeinstellungen Das Konfigurieren von Einstellungskombinationen wie "Einseitiger Druck im Querformat auf Papier im A4-Format" kann sehr zeitaufwendig sein. Wenn Sie solche häufig verwendeten Kombinationen von Druckeinstellungen als "Profile" speichern, können Sie die Druckeinstellungen vornehmen, indem Sie einfach eins der Profile aus der Liste auswählen. In diesem Abschnitt wird beschrieben, wie Sie Profile speichern und mit ihnen drucken.
HINWEIS Ändern der Einstellungen des ausgewählten Profils Sie können die Einstellungen eines ausgewählten Profils ändern. Darüber hinaus können Sie die geänderten Einstellungen als weiteres Profil speichern.
0CC5-05C Ändern von Standardeinstellungen Die Standardeinstellungen sind die Einstellungen, die beim Öffnen des Druckeinstellbildschirms des Druckertreibers zuerst angezeigt werden, aber Sie können sie ändern. Wenn Sie beispielsweise alle Dokumente, einschließlich farbiger Dokumente, in Schwarzweiß drucken wollen, können Sie die Standardeinstellung für den Farbmodus in [Schwarzweiß] ändern.
0CC5-05E Drucken vom USB-Speicher (USB-Druck) Sie können Bilddateien ausdrucken, die auf einem USB-Speichergerät gespeichert sind, indem Sie es direkt an das Gerät anschließen. Mit dieser Funktion können Sie Ausdrucke ohne einen Computer vornehmen. Verfügbare Dateiformate Sie können die folgenden Typen von Bilddateien drucken. JPEG (DCF/Exif 2.21 oder früher/JFIF) TIFF (JPEG-/MH-/MR-/MMR-Komprimierung) HINWEIS Die maximal druckbare Datengröße pro Datei *1 beträgt 50 MB*2.
2 3 Drücken Sie Wählen Sie mit (USB PRINT). / die Option , und drücken Sie . HINWEIS: Indexdruck Sie können Miniaturansichten der Bilddateien (nur JPEG) drucken, die auf einem USB-Speichergerät gespeichert sind. Um die Bilder als Miniaturansichten zu drucken, wählen Sie auf dem Bildschirm und fahren Sie mit dem nächsten Schritt fort. 4 Wählen Sie die zu druckende Datei, und drücken Sie . Sie können mehrere Dateien auswählen.
2 Wählen Sie , und drücken Sie 3 Wählen Sie die Anzeigemethode, und drücken Sie . . Zeigt Dateinamen und Datumsangaben an. HINWEIS: Sie können einstellen, ob abgekürzte Dateinamen angezeigt werden sollen. Anzeigeformat Dateiname Mit dieser Option wird die Vorschau angezeigt. Um eine Datei auszuwählen, drücken Sie Wechseln Sie mit / . zwischen den Vorschaubildern. Drücken Sie , um die Vorschau zu vergrößern. Drücken Sie der ursprünglichen Größe anzuzeigen.
HINWEIS: Wenn Sie oder wählen, werden die Dateien anhand von Änderungsdatum und -uhrzeit der Dateien sortiert. 5 Drücken Sie . 6 Legen Sie die gewünschten Druckeinstellungen fest. Wählen Sie mit / die Einstellungen aus, drücken Sie , und legen Sie jede Einstellung fest. Legen Sie die Anzahl der Kopien zwischen 1 und 99 fest. Geben Sie mit Menge ein, und drücken Sie .
1>, und drücken Sie . <2 auf 1> Druckt zwei Bilder auf ein einziges Blatt. <4 auf 1> Druckt vier Bilder auf ein einziges Blatt. HINWEIS: ist für den Druck von TIFF-Dateien nicht verfügbar. (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Sie können doppelseitige Ausdrucke erstellen. Wählen Sie mit / die Bindungsposition, und drücken Sie . Druckt die Dokumente so, dass die gedruckten Seiten nach dem Binden waagrecht geöffnet werden.
Sie können unter den einzelnen Bildern den Dateinamen drucken. Wählen Sie mit . Sie / die Option , und drücken HINWEIS: Auch wenn beim Indexdruck nicht zur Verfügung steht, wird der Dateiname automatisch unter den einzelnen Bildern gedruckt. Sie können den Originaltyp entsprechend dem zu druckendem Bild wählen. Wählen Sie mit .
Bilder mit feiner Gradation, wie Bilder von Digitalkameras, werden mit fließenden Übergängen gedruckt. Bilder mit kleinem Text oder feinen Linien werden deutlich gedruckt. 7 Drücken Sie . Das Drucken beginnt. Wenn Sie das Drucken abbrechen möchten, drücken Sie 8 . Trennen Sie das USB-Speichergerät vom USB-Speicheranschluss. 1 Drücken Sie 2 Drücken Sie 3 Wählen Sie mit 4 Wählen Sie , und drücken Sie . (Status Monitor).
0CC5-05F Ändern der Standardeinstellungen für den USB-Druck Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Drucken nicht jedes Mal die gewünschten Einstellungen erneut vorzunehmen.
0CC5-05H Verwenden von Google Cloud Print Mit dem Dienst Google Cloud Print kann ein Benutzer mit einem Google-Konto mithilfe eines mit dem Internet verbundenen Smartphones, Tablets oder Computers von Anwendungen wie Google Docs™ oder Gmail™ aus drucken. Anders als beim herkömmlichen Drucken von einem Computer aus können Sie mit der neuen Google Cloud Print-Technologie drucken, indem Sie einen Drucker direkt mit dem Internet verbinden.
0CC5-05J Vorbereitungen für Google Cloud Print Wenn Sie mit Google Cloud Print drucken wollen, registrieren Sie das Gerät bei Google Cloud Print. HINWEIS Wenn Sie Google Cloud Print nutzen wollen, ist ein Google-Konto erforderlich. Wenn Sie keins haben, rufen Sie zum Erstellen eines Kontos die Google-Website auf.
2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Klicken Sie auf [Netzwerkeinstellungen] 4 Klicken Sie in [Google Speicherstatus Cloud Druck] auf [Speichern...]. [Einstellungen Cloud Druck]. HINWEIS: Wenn [Speichern...] nicht zur Verfügung steht Sie müssen Google Cloud Print aktivieren. Klicken Sie auf [Bearbeiten...], aktivieren Sie das Kontrollkästchen [Cloud Druck verwenden], klicken Sie auf [OK], und starten Sie dann das Gerät neu.
6 Registrieren Sie das Gerät nach den Bildschirmanweisungen.
0CC5-05K Drucken mit Google Cloud Print Wenn Sie vom Computer oder Smartphone über Google Cloud Print Druckdaten senden, empfängt das Gerät die Druckdaten und druckt sie automatisch aus. 1 2 Vergewissern Sie sich, dass das Gerät eingeschaltet ist. Rufen Sie von einer Anwendung auf dem Computer oder Smartphone den Druckbildschirm auf.
0CC5-05L Verwenden von AirPrint Zum Drucken von Fotos, E-Mails, Webseiten und anderen Dokumenten benötigen Sie nicht unbedingt einen Computer. Mit AirPrint können Sie drahtlos von Apple-Geräten wie iPad, iPhone, iPod touch und Macintosh drucken, ohne den Druckertreiber zu verwenden.
Welche Einstellungen unter [Druckeroptionen] zur Verfügung stehen, hängt von der verwendeten Anwendung ab. Welche Papierformate zur Verfügung stehen, hängt von der verwendeten Anwendung ab. 6 Tippen Sie auf [Drucken]. Das Drucken beginnt.
Abbrechen mit einem Macintosh 1 2 3 Klicken Sie auf das Druckersymbol, das im Dock auf dem Desktop angezeigt wird. Klicken Sie auf das Dokument, bei dem das Drucken abgebrochen werden soll. Klicken Sie auf [Löschen]. Fehlerbehebung für AirPrint Sie können nicht mit AirPrint drucken. Vergewissern Sie sich, dass das Gerät eingeschaltet ist. Wenn das Gerät eingeschaltet ist, starten Sie es neu, und prüfen Sie, ob das Problem damit behoben ist.
4 Klicken Sie auf [Bearbeiten...]. 5 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK]. [AirPrint verwenden] Aktivieren Sie das Kontrollkästchen, um den Druck mit AirPrint zu aktivieren. Zum Deaktivieren von AirPrint deaktivieren Sie das Kontrollkästchen. [Druckername]/[Ort]/[Breitengrad]/[Längengrad] Geben Sie als Informationen, mit denen Sie dieses Gerät beim Bedienen des Apple-Geräts identifizieren können, den Namen und den Aufstellort ein.
Prüfen des Verbrauchsmaterials am Macintosh Rufen Sie den Bildschirm für AirPrint auf, auf dem Sie nicht nur auf die AirPrint-Einstellungen zugreifen, sondern auch Informationen zu Verbrauchsmaterial wie Papier und Toner anzeigen können. 1 2 3 4 Klicken Sie auf dem Desktop im Dock auf [Systemeinstellungen] [Drucken & Scannen]. Wählen Sie den Drucker, und klicken Sie auf [Optionen & Füllstände]. Klicken Sie auf [Druckerwebsite anzeigen]. Melden Sie sich bei Remote UI im Systemmanager-Modus an.
0CC5-05R Verwenden des Geräts als Scanner Sie können Originaldokumente über das Bedienfeld des Geräts oder eine Anwendung auf dem Computer scannen. Egal welches Verfahren Sie wählen, die gescannten Dokumente werden in elektronische Dateiformate wie PDFs umgewandelt. Verwenden Sie die Scanfunktion, um Papierdokumente mit vielen Seiten in Dateien umzuwandeln, sodass Sie sie einfacher organisieren können.
0CC5-05S Vorbereitungen zur Verwendung des Geräts als Scanner Stellen Sie sicher, dass das Gerät und der Computer miteinander verbunden sind und die gesamte Software installiert ist ( Anschließen an einen Computer). Um eine Verbindung über ein Wireless LAN oder verkabeltes LAN herzustellen, müssen Sie dieses Gerät bei der MF Network Scan Utility registrieren. Führen Sie zur Registrierung die unten aufgeführten Schritte aus.
0CC5-05X Scannen vom Gerät Die Abfolge "Scannen eines Dokuments und Speichern auf dem Computer" kann nur durchgeführt werden, wenn Sie über das Gerät scannen. Legen Sie beim Scanvorgang fest, auf welchem Computer die Dokumente gespeichert werden, ob die Dokumente in Farbe oder Schwarzweiß gespeichert werden sollen, ob die Dokumente als PDFs oder JPEGs gespeichert werden sollen sowie andere Einstellungen. 1 2 3 4 Legen Sie das Dokument oder die Dokumente ein.
So ändern Sie die Einstellungen Sie können die Einstellungen mit MF Toolbox ändern. 6 Drücken Sie Konfigurieren von Scaneinstellungen in der MF Toolbox . Das Scannen beginnt. Um den Vorgang abzubrechen, drücken Sie . WICHTIG: Sie können keinen Scanvorgang durchführen, während der MF ToolboxEinrichtungsbildschirm angezeigt wird. Schließen Sie den Bildschirm vor dem Scanvorgang.
Andere praktische Scanfunktionen Sie können gescannte Dokumente auf einem USB-Speichergerät speichern oder sie als E-Mail-Anhang senden. Die Dokumente können auch in gemeinsamen Ordnern gespeichert werden. Sie können diese Funktionen direkt über das Gerät nutzen.
0CC5-060 Scannen mit der Taste [Scan > PC] Legen Sie ein Dokument in das Gerät ein und drücken Sie oder , woraufhin der Scanvorgang sofort startet. Die Scanart (Farbe oder Schwarzweiß), das Speicherziel für das Dokument und andere Einstellungen können unter einer Taste registriert werden, und die Dokumente können mit diesen Einstellungen gescannt werden. Dieser Abschnitt beschreibt, wie Einstellungen unter einer Taste registriert werden und wie damit gescannt wird.
7 Wählen Sie den Scantyp, und drücken Sie Scantyp Farbe . Auflösung Dateiformat Farbe 300 dpi PDF (durchsuchbar) *1/Hohe Komprimierung Schwarzweiß*2 300 dpi TIFF Farbe 300 dpi JPEG/Exif Farbe 300 dpi PDF (durchsuchbar) *1/Standardkomprimierung *1 Ein PDF-Format, bei dem Zeichen im Dokument als Textdaten gescannt werden und der Text mit dem Computer durchsucht werden kann.
2 Drücken Sie oder . Informationen zum Überprüfen der unter der Taste registrierten Einstellungen finden Sie unter Einstellungen. Überprüfen der registrierten Das Scannen beginnt. Um den Vorgang abzubrechen, drücken Sie . WICHTIG: Sie können keinen Scanvorgang durchführen, während der MF ToolboxEinrichtungsbildschirm angezeigt wird. Schließen Sie den Bildschirm vor dem Scanvorgang.
LINKS Scannen vom Gerät 㻞㻡㻥㻌㻛㻌㻢㻤㻝
0CC5-0HK Scannen von einem Computer Es gibt zwei Arten, um über einen Computer zu scannen: die Verwendung von MF Toolbox und die Verwendung einer Anwendung, wie einer Bild- oder Textverarbeitungsanwendung. Scannen mithilfe der MF Toolbox MF Toolbox ist eine Anwendung, die im Lieferumfang des Geräts enthalten ist und mit der Sie Dokumente oder Bilder scannen und auf einem Computer speichern können. Sie können die gescannten Daten an eine bestimmte Anwendung weiterleiten oder sie an eine E-Mail anhängen.
0CC5-062 Scannen mithilfe der MF Toolbox Sie können gescannte Dokumente auf einem Computer speichern, sie zur Bearbeitung an eine bestimmte Anwendung weiterleiten oder sie an eine E-Mail anhängen. MF Toolbox bietet Voreinstellungen für jeden Zweck, darunter auch die Umwandlung in PDFs und den Farbscan. Sie können ganz einfach scannen, indem Sie eine Voreinstellung auswählen. Auf dem Bedienfeld 1 2 3 Legen Sie das Dokument oder die Dokumente ein. Drücken Sie Wählen Sie mit Einlegen von Dokumenten .
HINWEIS: So wechseln Sie den Scanner Wenn zwei oder mehr Geräte installiert sind und Sie zu einem anderen Gerät umschalten möchten, klicken Sie auf [Einstellungen] Konfigurieren der Einstellungen für MF Toolbox und den Scanner und wählen Sie das Gerät. 6 Konfigurieren Sie die gewünschten Scaneinstellungen. 7 Klicken Sie auf [Starten]. Konfigurieren von Scaneinstellungen in der MF Toolbox Das Scannen beginnt. Zum Abbrechen klicken Sie auf [Abbrechen].
Wenn die erwarteten Scanergebnisse nicht erzielt werden, weil zum Beispiel das Bild zu dunkel ist oder der Farbton vom Original abweicht, können Sie erweiterte Scaneinstellungen mit ScanGear MF konfigurieren. Legen Sie das Dokument erneut ein, aktivieren Sie auf dem Bildschirm von Schritt 6 das Kontrollkästchen [Scanner-Treiber anzeigen] und klicken Sie auf [Starten], um ScanGear MF zu starten.
HINWEIS: Hinzufügen von Kommentaren zu einer JPEG-Datei Wenn Sie [JPEG/Exif] wählen, können Sie beim Speichern Informationen wie das Datum oder Kommentare zu JPEG-Dateien hinzufügen. Wählen Sie das gescannte Bild, klicken Sie auf [Exif-Einstellungen], und geben Sie die Kommentare auf dem angezeigten Bildschirm ein. [Gescanntes Bild speichern unter] Legen Sie einen Speicherzielordner fest.
4 Das Scannen beginnt. Zum Abbrechen klicken Sie auf [Abbrechen]. Wenn Sie Dokumente in die Zufuhr einlegen Wenn der Scanvorgang abgeschlossen ist, wird das gescannte Dokument in einem Ordner auf dem Computer Konfigurieren von Einstellungen für das gespeichert oder an eine Anwendung weitergeleitet. Festlegen externer Anwendungen für das Weiterleiten gescannter Daten Speichern Wenn Sie Dokumente auf das Vorlagenglas legen Der unten dargestellte Bildschirm wird angezeigt.
LINKS Konfigurieren von Scaneinstellungen in der MF Toolbox 㻞㻢㻢㻌㻛㻌㻢㻤㻝
0CC5-063 Konfigurieren von Scaneinstellungen in der MF Toolbox Sie können die voreingestellten Einstellungen ändern, wie zum Beispiel die Scanart (Farbe oder Schwarzweiß), das Dateiformat und die Auflösung, und sie an Ihre Vorstellungen anpassen. Sie können auch ein Ziel festlegen, unter dem das gescannte Dokument gespeichert wird, eine Anwendung als Weiterleitungsziel und andere Einstellungen.
[Eingabemethode] (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Legen Sie fest, ob Sie ein ein- oder doppelseitiges in die Zufuhr eingelegtes Dokument scannen möchten. [Papierformat] Wählen Sie das Dokumentformat. Wenn Sie eine Option für ein benutzerdefiniertes Format wählen, wird der Bildschirm [Papierformateinst] geöffnet. Sie können dann ein benutzerdefiniertes Format eingeben. [Ausrichtung] Wenn Dokumente in die Zufuhr eingelegt werden, legen Sie die Ausrichtung der Dokumente fest.
Konfigurieren von Einstellungen für das Speichern Legen Sie Einstellungen wie Dateiname, Dateiformat (PDF, JPEG usw.) und Speicherziel für die gescannten Daten fest. [Dateiname] Geben Sie den Namen für die gescannte Datendatei ein. HINWEIS: Wenn am Speicherziel bereits eine Datei mit demselben Namen vorhanden ist, wird an den Namen der neuen Datei eine fortlaufende, eindeutige vierstellige Nummer (zum Beispiel "0001") angehängt. [Speichern als] Wählen Sie das Dateiformat.
[Farbscan] [S&W-Scan] [Ben. def. 1] * [Ben. def. 2] * * Nicht verfügbar, wenn [Scan-Modus] auf [Schwarzweiß] oder [Schwarzweiß (OCR)] gesetzt ist. Konfigurieren von Scaneinstellungen Wenn eine Meldung angezeigt wird, dass das Bildformat zu groß ist Reduzieren Sie den [Bildqualität]-Wert.
[Löschen] Wenn Sie das gescannte Dokument nicht an eine Anwendung weiterleiten möchten und es stattdessen zum Beispiel speichern möchten, klicken Sie auf diese Schaltfläche. [Einstellen] Klicken Sie auf diese Schaltfläche und wählen Sie eine Anwendung. Alternativ können Sie eine Anwendung festlegen, indem Sie ihr Symbol hierher ziehen, wenn es sich nicht um eine E-Mail-Anwendung handelt.
0CC5-061 Scannen mithilfe einer Anwendung Scannen Sie das Dokument mit einer Anwendung. Sie können Adobe Photoshop, Microsoft Office Word oder andere Bild- und Textverarbeitungsanwendungen verwenden. Das gescannte Bild wird direkt in die Anwendung geladen, sodass Sie es sofort bearbeiten oder verarbeiten können. Die folgenden Schritte variieren abhängig von der Anwendung. WICHTIG Die Anwendung muss mit TWAIN oder WIA * kompatibel sein.
LINKS Konfigurieren von Scaneinstellungen in ScanGear MF 㻞㻣㻟㻌㻛㻌㻢㻤㻝
0CC5-064 Konfigurieren von Scaneinstellungen in ScanGear MF ScanGear MF ist ein Scannertreiber im Lieferumfang des Geräts. Sie können ScanGear MF wie folgt nutzen. Starten über MF Toolbox Wenn Sie über MF Toolbox scannen, können Sie ScanGear MF aufrufen und erweiterte Scaneinstellungen konfigurieren. Aktivieren Sie Scannen das Kontrollkästchen [Scanner-Treiber anzeigen] und klicken Sie in MF Toolbox auf [Start], um ScanGear MF zu starten.
0CC5-0HL Konfigurieren von Scaneinstellungen im einfachen Modus Der einfache Modus ist eine Sammlung der grundlegenden Scaneinstellungen in ScanGear MF, der für eine einfache Bedienung konzipiert ist. Der einfache Modus ist, mit anderen Worten, eine Übersichtsversion von ScanGear MF. Konfigurieren Sie die Einstellungen in der bis auf dem Bildschirm angegeben ist, und klicken Sie auf [Scannen]. So können Sie die grundlegenden Reihenfolge, die von Einstellungen konfigurieren und dann scannen.
Wenn Sie das Dokument in die Zufuhr einlegen [Doku. (Farbe) ADF] Das Dokument wird als Farbbild gescannt. [Doku. (Graustufen) ADF] Das Dokument wird als Graustufenbild gescannt. [Zweck auswählen] Wählen Sie die Einstellung je nach dem beabsichtigten Verwendungszweck des gescannten Bilds. [Drucken (300 dpi)] Wählen Sie diese Option, wenn Sie das gescannte Bild drucken. [Bildanzeige (150 dpi)] Wählen Sie diese Einstellung, wenn Sie das gescannte Bild auf einem Computer anzeigen wollen.
0CC5-0HR Konfigurieren von Scaneinstellungen im erweiterten Modus Wenn Sie auf die Registerkarte [Erweiterter Modus] des Bildschirms ScanGear MF klicken, können Sie umfangreichere Einstellungen der Bildqualität als im einfachen Modus vornehmen. Sie können auch erweiterte Einstellungen als "Bevorzugte Einstellungen" registrieren. neben dem Thema klicken.
Mit dieser Option ziehen Sie das Bild, um den sichtbaren Teil des Bildes zu verschieben, wenn ein Vorschaubild vergrößert ist. (Zoom) Diese Option vergrößert das gesamte Vorschaubild. Klicken Sie mit der linken Maustaste auf das Bild, um es zu vergrößern. Klicken Sie mit der rechten Maustaste auf das vergrößerte Bild, um es zu verkleinern. Um einen Teil des Bildes zur Überprüfung der Details zu vergrößern, verwenden Sie [Zoom] ( ).
Wenn Dokumente in die Zufuhr eingelegt werden, legen Sie die Ausrichtung der Dokumente unter [Ausrichtung] fest. Sie können auch [Bindung] festlegen, wenn doppelseitige Dokumente in die Zufuhr eingelegt werden. [Farbmodus] Wählen Sie die Bildart, um Dokumente zu scannen. [Schwarzweiß] Das Dokument wird als Schwarzweißbild (nur schwarzweiß ohne graue Zwischenstufen) gescannt.
Wählen Sie [Flexibel], um das Ausgabeformat und das Verhältnis von Breite zu Höhe zu ändern. Ziehen Sie den zu scannenden Bereich im Vorschaubild oder geben Sie Werte für Breite und Höhe ein. Wenn Sie das Vergrößerungsverhältnis im Eingabefeld [%] auf der rechten Seite der Eingabefelder für Breite und Höhe eingeben, wird das Dokument für den Scanvorgang vergrößert oder verkleinert.
Konfigurieren Sie die Farbeinstellungen, wie Helligkeit, Kontrast und Farbton. Die angezeigten Optionen variieren abhängig von den für [Farbmodus] ausgewählten Einstellungen ( Festlegen der Einstellungen für Dokumente und den Farbmodus). Wenn [Textverbesserung] ausgewählt ist, können Sie diese Einstellungen nicht konfigurieren. (Helligkeit/Kontrast) Diese Option passt die Helligkeit und den Kontrast (den Unterschied zwischen den hellen und dunklen Teilen) des Bildes an.
(Graubalance-Pipette) Klicken Sie auf den Bereich des Vorschaubildes (oder des Schnittrahmens), den Sie als achromatische Farbe rendern möchten, also Schwarz, Grau oder Weiß ist, die jeweils keine Farbtiefe haben. Der Farbton des übrigen Bilds wird angepasst, wobei der angeklickte Bildbereich der Durchschnitt ist. Wenn zum Beispiel der Schnee in einem Foto bläulich ist, klicken Sie auf diesen Teil, da Sie diesen Teil im Endeffekt weiß darstellen möchten.
Registrieren oder Abrufen von Einstellungen Rufen Sie registrierte Helligkeits- oder Farbeinstellungen für verwendeter Einstellungen bis und ab. Registrieren häufig Festlegen anderer Einstellungen Klicken Sie auf [Voreinstellungen], um verschiedene Einstellungen zu konfigurieren, darunter auch den Vorgang beim Scannen. Registerkarte [Vorschau] Konfigurieren Sie die Schritte für die Vorschau und das automatische Beschneiden.
[Scannen ohne ScanGear-Fenster] Wenn Sie die Dokumente mit einer OCR-Software oder einer anderen Anwendung scannen, wird der ScanGear MFBildschirm möglicherweise nicht angezeigt. In solch einem Fall wird das Dokument mit der Einstellung der verwendeten Anwendung gescannt. Wenn die Anwendung aber nicht über die folgenden Einstellungen verfügt, sollten Sie sie hier aktivieren, sodass diese Einstellungen auf den Scanvorgang angewendet werden.
[Speicherordner für temporäre Dateien wählen] Klicken Sie auf [Suche], um den Ordner zu ändern, in dem ein Bild vorübergehend gespeichert wird. [Audioeinstellungen] Sie können Musik oder Signaltöne einstellen, die während des Scannens oder beim Abschluss des Scannens wiedergegeben werden. Klicken Sie auf [Suche], um eine wiederzugebende Datei auszuwählen. Die folgenden Dateiformate werden unterstützt: MIDI-Dateien (.mid/.rmi/.midi) Audiodateien (.wav/.aif/.aiff) MP3-Dateien (.
3 Wählen Sie unter [Bevorzugte Einstellungen] die Option [Hinzufügen/Löschen]. Der Bildschirm [Bevorzugte Einstellungen hinzufügen/löschen] wird angezeigt. [Hinzufügen/Löschen] ist verfügbar, wenn das Vorschaubild angezeigt wird. 4 Geben Sie unter [Einstellungsname] einen Namen ein, und klicken Sie auf [Hinzufügen] [Speichern]. Geben Sie einen Namen für die zu registrierenden Einstellungen ein. Verwenden Sie einen Namen, der in der Dropdown-Liste leicht zu finden ist.
befolgen Sie die unten aufgeführten Schritte. 1 2 Legen Sie das Dokument oder die Dokumente ein, und klicken Sie auf [Vorschau]. Passen Sie die Helligkeit oder Farbe an. Anpassen der Helligkeit und Farbe Wählen Sie nach Bedarf die zu registrierenden Einstellungen. 3 Wählen Sie in der Dropdown-Liste die Option [Hinzufügen/Löschen]. Der Bildschirm [Farbtonkurveneinstellungen hinzufügen/löschen] oder [Grenzwerteinstellungen hinzufügen/löschen] wird angezeigt.
0CC5-0HS Praktisches Scannen mit einem gerätbasierten Vorgang Das Gerät kann Originaldokumente ohne Computer in elektronische Dateiformate wie PDF umwandeln. Das Digitalisieren von Dokumenten hat viele Vorteile. Ihnen stehen zahlreiche praktische Einstellungen zur Verfügung, die Sie Ihren Vorstellungen entsprechend anpassen können.
0CC5-066 Direktes Speichern gescannter Dokumente auf einem USB-Speicher Dieser Abschnitt beschreibt, wie Dokumente gescannt und direkt auf einem USB-Speichergerät gespeichert werden, das an das Gerät angeschlossen ist. Sie können die gescannten Dokumente im Format PDF, JPEG oder TIFF speichern. Geeignete USB-Speichergeräte Sie können USB-Speichergeräte mit den folgenden Formatierungsarten verwenden.
Wenn Sie unter JPEG wählen und das Dokument auf das Vorlagenglas legen, können Sie nur eine Seite scannen. Wenn Sie mehrere Dokumente auf einmal scannen wollen, legen Sie sie in die Zufuhr ein. Die Dokumente werden gescannt und als getrennte Dateien gespeichert. Bei PDF- oder TIFF-Dateien können mehrere Dokumente gescannt und in einem Satz Dateien gespeichert werden, unabhängig davon, ob die Dokumente auf das Vorlagenglas oder in die Zufuhr gelegt werden. 6 Drücken Sie .
㻞㻥㻝㻌㻛㻌㻢㻤㻝
0CC5-06C Direktes Versenden von Dokumenten als E-Mails über das Gerät (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Sie können wie beim Senden normaler E-Mails mehrere Empfänger festlegen, einschließlich CC-/BCC-Empfängern. 1 2 3 4 Legen Sie das Dokument oder die Dokumente ein. Drücken Sie Wählen Sie mit Einlegen von Dokumenten . / die Option , und drücken Sie . Geben Sie mit den Zahlentasten den Empfänger ein, und drücken Sie . Mit schalten Sie zwischen den Eingabemodi um.
HINWEIS: Sie können als Dateiformat entweder oder auswählen. Der Dateiname eines gescannten Dokuments wird automatisch auf Grundlage des folgenden Formats zugewiesen: Kommunikationsverwaltungsnummer (vierstellig)_Datum und Uhrzeit des Sendevorgangs_Dokumentnummer (dreistellig).pdf. Beispiel für einen Dateinamen: Wenn ein einseitiges Dokument in eine PDF-Datei umgewandelt und am 17. Oktober 2013 um 19:00:05 gesendet wird. 0045_131017190005_001.
6 Drücken Sie . So geben Sie eine Antwortadresse an 1 Wählen Sie , und drücken Sie 2 Wählen Sie , und drücken Sie 3 Wählen Sie eine Antwortadresse aus dem Adressbuch, und drücken Sie . . Anweisungen zum Verwenden des Adressbuchs finden Sie in So legen Sie die Priorität fest 8 1 Wählen Sie , und drücken Sie 2 Wählen Sie eine Prioritätsstufe, und drücken Sie Drücken Sie . . , um das Senden zu starten. Das Scannen beginnt.
Wenn Sie in Schritt 1 Dokumente in die Zufuhr einlegen Die E-Mail wird gesendet, wenn das Scannen abgeschlossen ist. Wenn Sie in Schritt 1 Dokumente auf das Vorlagenglas legen Gehen Sie wie unten erläutert vor, wenn das Scannen abgeschlossen ist. 1 Wenn weitere Dokumentenseiten gescannt werden sollen, legen Sie die nächste Seite auf das . Vorlagenglas, und drücken Sie Wiederholen Sie diesen Schritt, bis alle gewünschten Seiten gescannt wurden.
0CC5-078 Direktes Speichern von Dokumenten in einem gemeinsamen Ordner (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) HINWEIS Wenn Sie einen gemeinsamen Ordner als Empfänger auswählen wollen, können Sie nur im Adressbuch gespeicherte Empfänger auswählen. Wenn keine Empfänger gespeichert sind, speichern Sie Empfänger im Adressbuch, bevor Sie Dokumente für das Speichern in gemeinsamen Ordnern scannen.
Beispiel für einen Dateinamen: Wenn ein einseitiges Dokument in eine PDF-Datei umgewandelt und am 17. Oktober 2013 um 19:00:05 gesendet wird. 0045_131017190005_001.pdf Sie können die Dateinamen nicht selbst festlegen. 6 Drücken Sie , um das Scannen zu starten. Das Scannen beginnt. Wenn Sie das Scannen abbrechen möchten, drücken Sie . Wenn Sie in Schritt 1 Dokumente in die Zufuhr einlegen Wenn das Scannen abgeschlossen ist, werden die gescannten Dokumente im gemeinsamen Ordner gespeichert.
0CC5-06E Abbrechen des Sendevorgangs von Dokumenten (E-Mail/Gemeinsamer Ordner) (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Wenn Sie das Senden direkt nach dem Drücken von Wenn nach dem Drücken von abbrechen möchten, drücken Sie auf dem Bedienfeld. auf dem Bildschirm eine Liste von Dokumenten angezeigt wird Die Dokumente wurden gescannt und sind zur Verarbeitung bereit. Wählen Sie mit abgebrochen werden soll.
0CC5-06F Festlegen detaillierter Einstellungen Dieser Abschnitt beschreibt die beim Scannen von Dokumenten verfügbaren Einstellungen. Diese Einstellungen umfassen das Festlegen des Dateiformats, in das die Dokumente umgewandelt werden, und das Anpassen der Dichte, um die Darstellung gescannter Dokumente so gut wie möglich zu verbessern, sowie die grundlegenden Einstellungen, wie das Festlegen der Dokumentausrichtung oder des Dokumentformats.
0CC5-06H Angeben eines Scanformats Sie können das Scanformat für die Dokumente angeben.
0CC5-06J Auswählen eines Dateiformats Sie können eins von vier Dateiformaten wählen, in das die Dokumente konvertiert werden: , , * und * . Die gescannten Dokumente werden in das hier angegebene Dateiformat konvertiert und an den angegebenen Empfänger gesendet.
LINKS Direktes Speichern gescannter Dokumente auf einem USB-Speicher Direktes Versenden von Dokumenten als E-Mails über das Gerät (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Direktes Speichern von Dokumenten in einem gemeinsamen Ordner (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) 㻟㻜㻞㻌㻛㻌㻢㻤㻝
0CC5-06K Justieren der Dichte Sie können die Dichte beim Scannen justieren, wenn Text oder Bilder in einem Dokument zu hell oder zu dunkel sind. Dichte Legen Sie das Speicherziel fest, oder schließen Sie ein USB-Speichergerät an Justieren Sie die <–> Verringert die Dichte. <+> Erhöht die Dichte.
0CC5-06L Einstellen der Ausrichtung des Dokuments Sie können Hoch- oder Querformat einstellen. Legen Sie das Speicherziel fest, oder schließen Sie ein USB-Speichergerät an Wählen Sie die Dokumentenausrichtung Wählen Sie diese Einstellung für Dokumente im Hochformat. Wählen Sie diese Einstellung für Dokumente im Querformat.
0CC5-06R Auswählen von Dokumententypen Sie können die Bildqualität für den Scan abhängig vom Dokumententyp auswählen, wie zum Beispiel NurText-Dokumente, Dokumente mit Diagrammen und Grafiken oder Zeitschriftenfotos. Legen Sie das Speicherziel fest, oder schließen Sie ein USB-Speichergerät an den Dokumententyp Wählen Sie Geeignet für das Scannen von reinen Textdokumenten. Geeignet für das Scannen von Dokumenten mit Text und Fotos.
0CC5-06S Scannen doppelseitiger Dokumente (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Das Gerät kann automatisch die Vorder- und Rückseite von Dokumenten in der Zufuhr scannen. WICHTIG Wenn die Dokumente auf das Vorlagenglas gelegt werden, können nicht beide Seiten automatisch gescannt werden.
0CC5-06U Justieren der Schärfe Sie können die Schärfe des Bildes vor dem Senden anpassen. Erhöhen Sie die Schärfe, um verschwommenen Text und Linien schärfer darzustellen, oder senken Sie die Schärfe, um die Darstellung von Zeitschriftenfotos zu verbessern. Legen Sie das Speicherziel fest, oder schließen Sie ein USB-Speichergerät an Schärfe Justieren Sie die <–> Verringert die Schärfe und schwächt die Kontraste im Bild ab.
0CC5-06W Einstellen der Balance zwischen Dateigröße und Bildqualität Die gescannten Dokumente werden in die angegebenen Dateiformate umgewandelt. Zu diesem Zeitpunkt können Sie das Dateikomprimierungsverhältnis festlegen. erreicht ein höheres Komprimierungsverhältnis als normal, um kleinere Dateien mit niedrigerer Bildqualität zu erstellen.
0CC5-06X Einstellen von Gammawerten Die gescannten Dokumente werden in die angegebenen Dateiformate umgewandelt. Zu diesem Zeitpunkt können Sie die Gammawerte festlegen, die auf die Dokumente angewendet werden sollen. Sie können den gleichen Gammawert wie bei dem Monitor festlegen, der für die Anzeige der umgewandelten Dateien verwendet wird, sodass die Dateien mit der Helligkeit der Originaldokumente angezeigt werden.
0CC5-06Y Festlegen der Empfänger (E-Mail/Gemeinsamer Ordner) (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Sie können Empfänger über die Zahlentasten festlegen oder indem Sie sie aus dem Adressbuch auswählen. Zur Verwendung des Adressbuchs müssen Sie die Empfänger zuvor im Adressbuch registrieren. Sie können auch zuvor verwendete Empfänger angeben. Wenn in Ihrem Büro ein LDAP-Server installiert ist, können Sie auch Empfänger auf dem Server angeben.
0CC5-070 Angeben mit Zahlentasten (E-Mail) Geben Sie Empfänger mit den Zahlentasten auf dem Bedienfeld an. WICHTIG Wenn auf gesetzt ist, können Sie mit den Zahlentasten keine Empfänger angeben. Einschränken der verfügbaren Empfänger HINWEIS Sie können mit den Zahlentasten nur den ersten Empfänger angeben. Wenn Sie weitere Empfänger angeben wollen, nutzen Sie das Adressbuch oder einen LDAP-Server. Zum Angeben von CC-/BCC-Empfängern müssen Sie das Adressbuch verwenden.
0CC5-071 Angeben aus dem Adressbuch Im Adressbuch können Sie einen Empfänger aus der Liste der gespeicherten Empfänger auswählen oder unter den Empfängern, für die ein Name gespeichert ist, nach einem Namen suchen. Außerdem können Sie einen Empfänger direkt über die dem Empfänger zugewiesene dreistellige Nummer (Nummer für die kodierte Wahl) angeben.
< > Zeigt Empfänger für Faxe an. Informationen zum Angeben von Empfängern mit dieser Registerkarte finden Sie in aus dem Adressbuch (Fax). Angeben > < Zeigt Empfänger für E-Mails an. > < Zeigt gemeinsame Ordner als Empfänger an. > < Zeigt eine Liste der für die Gruppenwahl gespeicherten Empfänger an. Diese Funktion steht beim Speichern gescannter Dokumente in gemeinsamen Ordnern nicht zur Verfügung. 5 Wählen Sie mit / einen Empfänger, und drücken Sie .
Direktauswahl von Empfängern durch Eingabe von Nummern für die kodierte Wahl 1 2 Drücken Sie . Drücken Sie (Kodierte Wahl). Sie können auch mit 3 / auf dem Bildschirm die Option <Über Kodierte Wahl definieren> wählen und dann drücken. Geben Sie mit den Zahlentasten eine dreistellige Nummer (001 bis 181) ein. Wenn Sie bei der Eingabe einen Fehler gemacht haben, drücken Sie .
HINWEIS Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 wählen, können Sie mit / zwischen den angegebenen Empfängern umschalten. Rufen Sie den Empfänger auf, den Sie löschen möchten, und drücken Sie .
0CC5-072 Angeben von zuvor verwendeten Empfängern Sie können einen Empfänger aus den drei zuletzt verwendeten Empfängern auswählen. Wenn Sie einen zuvor verwendeten Empfänger angeben, gelten dieselben Scaneinstellungen, wie die Dichte, die beim letzten Senden von Dokumenten an diesen Empfänger eingestellt waren. WICHTIG Wenn auf gesetzt ist, können Sie diese Funktion nicht verwenden.
0CC5-073 Angeben von auf einem LDAP-Server gespeicherten Empfängern (E-Mail) Wenn im Büro ein LDAP-Server installiert ist, können Sie auf dem Server gespeicherte Empfänger verwenden. Greifen Sie dazu über das Gerät auf den LDAP-Server zu, und suchen Sie den Empfänger. HINWEIS Sie müssen vorab die Einstellungen für die Verbindung zu dem LDAP-Server vornehmen. Speichern von LDAP-Servern (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) 1 2 Drücken Sie Wählen Sie mit .
7 Geben Sie das Suchverfahren an, und drücken Sie . Sucht die Empfänger, die allen in Schritt 4 und 5 angegebenen Suchkriterien entsprechen, und zeigt diese an. Alle Empfänger, die einem der in Schritt 4 und 5 angegebenen Suchkriterien entsprechen, werden als Suchergebnis angezeigt. 8 Drücken Sie . Die Empfänger, die den Suchkriterien entsprechen, werden angezeigt.
3 Drücken Sie , wählen Sie , und drücken Sie . HINWEIS Wenn Sie schnell und einfach Empfänger löschen möchten, ohne eine Liste der Empfänger anzuzeigen Bevor Sie in Schritt 1 wählen, können Sie mit / zwischen den angegebenen Empfängern umschalten. Rufen Sie den Empfänger auf, den Sie löschen möchten, und drücken Sie .
0CC5-068 Ändern von Standardeinstellungen Die Standardeinstellungen werden angezeigt, wenn Sie das Gerät einschalten oder drücken. Wenn Sie diese Standardeinstellungen gemäß Ihren Anforderungen ändern, brauchen Sie beim Scannen nicht jedes Mal die gewünschten Einstellungen erneut zu konfigurieren.
Einstellungen Wählen Sie die Option, die Sie einstellen wollen, und ändern Sie den Standardwert.
0CC5-075 Überprüfen des Logs auf gesendete Dokumente (E-Mail/Gemeinsamer Ordner) (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Die Logs für gesendete E-Mails oder in gemeinsamen Ordnern gespeicherte gescannte Dokumente können in einer Liste angezeigt werden. WICHTIG Wenn auf gesetzt ist, können Sie die Logs für gesendete Dokumente nicht anzeigen. Auftragslog anzeigen 1 2 3 Drücken Sie Wählen Sie mit (Status Monitor).
0CC5-07K Netzwerk Das Gerät wurde für den flexiblen Einsatz in verschiedensten Umgebungen entwickelt und bietet zusätzlich zu den grundlegenden Netzwerkfunktionen modernste Technologien. Für die Konfiguration müssen Sie aber kein Netzwerkexperte sein, denn das Gerät ist ganz auf komfortable Bedienung und Anwenderfreundlichkeit ausgelegt. Nehmen Sie die Netzwerkkonfiguration wie beschrieben einfach Schritt für Schritt vor.
0CC5-07L Anschließen an ein Netzwerk Wenn Sie das Gerät an ein Wired LAN oder ein Wireless LAN anschließen, müssen Sie eine für das ausgewählte Netzwerk eindeutige IPAdresse einstellen. Wählen Sie "Wired" oder "Wireless" je nach Kommunikationsumgebung und Netzwerkgeräten aus ( Anschließen an einen Computer). Informationen zu spezifischen IP-Adresseinstellungen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator.
Stellen Sie bei Bedarf die IP-Adresse ein. Dieser Schritt ist erforderlich, wenn Sie dem Gerät eine bestimmte IP-Adresse zuweisen oder eine andere als die standardmäßige dynamische IP-Adressierung mit DHCP verwenden möchten.
0CC5-07R Auswählen von Wired LAN oder Wireless LAN (nur MF8580Cdw / MF8280Cw) Nachdem Sie festgelegt haben, ob das Gerät über ein Wired LAN oder Wireless LAN mit dem Computer verbunden wird ( Anschließen an einen Computer), wählen Sie über das Bedienfeld die Einstellung für Wired LAN oder Wireless LAN.
0CC5-07S Herstellen einer Verbindung zu einem Wired LAN Verbinden Sie das Gerät über einen Router mit einem Computer. Schließen Sie das Gerät mit einem LAN-Kabel an den Router an. 1 Schließen Sie ein LAN-Kabel an. Schließen Sie das Gerät über ein LAN-Kabel an einen Router an. Schieben Sie den Stecker in die Buchse, bis er mit einem Klicken einrastet. 2 Warten Sie etwa 2 Minuten. Währenddessen wird die IP-Adresse automatisch eingestellt. HINWEIS: Sie können die IP-Adresse auch manuell einstellen.
0CC5-07U Herstellen einer Verbindung zu einem Wireless LAN (nur MF8580Cdw / MF8280Cw) Ein Wireless LAN-Router (oder Access Point) stellt die Verbindung zwischen dem Gerät und dem Computer über Funk her. Sofern der Wireless LAN-Router mit WPS (Wi-Fi Protected Setup) ausgestattet ist, können Sie das Netzwerk ganz einfach automatisch konfigurieren.
Einige WPS-Router unterstützen die Konfiguration über Tastendruck nicht. Wenn auf der Verpackung oder im Handbuch des Netzwerkgeräts die Eingabe des WPS-PIN-Codes erwähnt wird, richten Sie die Verbindung durch Eingabe des PIN-Codes ein. Konfiguration der Verbindung über die Eingabe des WPS-PIN-Codes HINWEIS Wenn der Wireless LAN-Router auf die Verwendung der WEP-Authentisierung eingestellt ist, können Sie die Verbindung unter Umständen nicht mit WPS konfigurieren.
0CC5-07W Konfiguration der Verbindung über die WPS-Taste Wenn der Wireless LAN-Router die Konfiguration über die WPS-Taste unterstützt, können Sie die Verbindung ganz einfach mit einem Tastendruck konfigurieren. WICHTIG Die Bedienung des Wireless LAN-Routers kann sich je nach Gerät unterscheiden. Näheres dazu finden Sie in den Anleitungen zum verwendeten Netzwerkgerät. 1 2 Drücken Sie Wählen Sie mit . / die Option , und drücken Sie .
Nach Abschluss der Konfiguration wird der unten abgebildete Bildschirm angezeigt, und etwa 2 Sekunden später leuchtet die WiFi-Anzeige auf. Warten Sie etwa 2 Minuten, bis die IP-Adresseinstellung des Geräts abgeschlossen ist. WICHTIG: Signalstärke Wenn mehr als ein Wireless LAN-Router vorhanden ist, mit dem eine Verbindung hergestellt werden kann, stellt dieses Gerät die Verbindung mit dem Router mit dem stärksten Signal her.
0CC5-07X Konfiguration der Verbindung über die Eingabe des WPS-PIN-Codes Wenn der Wireless LAN-Router die Konfiguration über die Eingabe des WPS-PIN-Codes unterstützt, generieren Sie mit dem Gerät einen PIN-Code, und speichern Sie diesen im Netzwerkgerät. WICHTIG Die Bedienung des Wireless LAN-Routers kann sich je nach Gerät unterscheiden. Näheres dazu finden Sie in den Anleitungen zum verwendeten Netzwerkgerät.
Auf dem Bedienfeld 9 Überprüfen Sie, ob die Wi-Fi-Anzeige auf dem Bedienfeld blinkt. Die Wi-Fi-Anzeige blinkt, wenn ein Wireless LAN-Router erkannt wird. Nach Abschluss der Konfiguration wird der unten abgebildete Bildschirm angezeigt, und etwa 2 Sekunden später leuchtet die WiFi-Anzeige auf. Warten Sie etwa 2 Minuten, bis die IP-Adresseinstellung des Geräts abgeschlossen ist.
0CC5-07Y Konfiguration der Verbindung durch Auswahl eines Wireless LAN-Routers Sie können die Wireless LAN-Router (oder Access Points) suchen, mit denen eine Verbindung hergestellt werden kann, und einen im Display des Geräts auswählen. Geben Sie als Netzwerkschlüssel einen WEP- oder TKIP-Schlüssel ein.
Wenn der gewünschte Wireless LAN-Router nicht gefunden wird Prüfen Sie, ob das Gerät ordnungsgemäß installiert und für eine Verbindung mit dem Netzwerk bereit ist. Installation/Einstellungen 8 Probleme mit Geben Sie den zuvor notierten Netzwerkschlüssel ein. Geben Sie mit den Zahlentasten den Netzwerkschlüssel ein, und drücken Sie . Eingeben von Text WPA-PSK oder WPA2-PSK WEP 9 Wählen Sie , und drücken Sie .
Wenn sich die IP-Adresse des Geräts geändert hat In einer DHCP-Umgebung ändert sich die IP-Adresse des Geräts möglicherweise automatisch. In diesem Fall wird die Verbindung aufrechterhalten, solange das Gerät und der Computer zu demselben Subnet gehören.
0CC5-080 Konfiguration der Verbindung durch Festlegen detaillierter Einstellungen Wenn Sie detaillierte Sicherheitseinstellungen festlegen möchten oder die Wireless LAN-Verbindung anhand der anderen Verfahren nicht herstellen können, geben Sie alle für die Wireless LAN-Verbindung benötigten Informationen manuell ein.
3 Wählen Sie , und drücken Sie 4 Wählen Sie den WEP-Schlüssel (1 bis 4), den Sie bearbeiten wollen, und drücken Sie . . Bis zu vier WEP-Schlüssel können gespeichert werden. 5 Geben Sie den zuvor notierten Netzwerkschlüssel ein. Geben Sie mit den Zahlentasten den Netzwerkschlüssel ein, und drücken Sie . Text 6 Wählen Sie , und drücken Sie 7 Wählen Sie den WEP-Schlüssel, den Sie bearbeitet haben, und drücken Sie Eingeben von . .
HINWEIS: Wenn während der Konfiguration eine Fehlermeldung angezeigt wird Drücken Sie 9 , überprüfen Sie, ob die angegebenen Einstellungen korrekt sind, und fangen Sie wieder mit Schritt 5 an. Überprüfen Sie, ob die Wi-Fi-Anzeige auf dem Bedienfeld blinkt. Die Wi-Fi-Anzeige blinkt, wenn ein Wireless LAN-Router erkannt wird. Nach Abschluss der Konfiguration wird der unten abgebildete Bildschirm angezeigt, und etwa 2 Sekunden später leuchtet die WiFi-Anzeige auf.
0CC5-081 Überprüfen von SSID und Netzwerkschlüssel Bei der manuellen Konfiguration einer Wireless LAN-Verbindung müssen Sie die SSID und den Netzwerkschlüssel des Wireless LANRouters eingeben. Die SSID und der Netzwerkschlüssel sind unter Umständen auf den verwendeten Netzwerkgeräten angegeben. Überprüfen Sie die Geräte, und notieren Sie die benötigten Informationen, bevor Sie die Verbindung konfigurieren.
4 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Yes], wenn Sie dieser zustimmen. 5 Überprüfen Sie die für den Wireless LAN-Router angezeigten Informationen. Notieren Sie die benötigten Informationen. Wenn Sie nicht wissen, welche Informationen Sie benötigen, notieren Sie alle angezeigten Informationen. HINWEIS: Wenn keine Wireless LAN-Router gefunden werden Klicken Sie auf [Refresh].
0CC5-082 Einstellen von IP-Adressen Wenn Sie das Gerät mit einem Netzwerk verbinden, ist eine eindeutige IP-Adresse im Netzwerk erforderlich. Zwei Versionen von IPAdressen stehen zur Verfügung: IPv4 und IPv6. Konfigurieren Sie diese Einstellungen je nach Netzwerkumgebung. Wenn Sie IPv6Adressen verwenden möchten, müssen Sie die IPv4-Adresseinstellungen richtig konfigurieren.
0CC5-083 Einstellen der IPv4-Adresse Die IPv4-Adresse des Geräts kann über ein Protokoll für die dynamische IP-Adressierung, beispielsweise DHCP, automatisch zugewiesen oder manuell eingegeben werden. Wenn Sie das Gerät an ein verkabeltes LAN anschließen, vergewissern Sie sich, dass die Stecker des LAN-Kabels fest in den Anschlüssen sitzen ( Herstellen einer Verbindung zu einem Wired LAN). Falls erforderlich, können Sie die Netzwerkverbindung testen.
Wenn ausgewählt ist, ändern Sie die Einstellung in . 4 Drücken Sie . HINWEIS: Über DHCP/BOOTP/RARP zugewiesene IP-Adressen haben Vorrang vor den mit Auto IP abgerufenen Adressen. Manuelles Eingeben einer IP-Adresse 1 Überprüfen Sie, ob auf gesetzt ist. Wenn angezeigt wird, wählen Sie .
LINKS Einstellen von IPv6-Adressen Anzeigen von Netzwerkeinstellungen Konfigurieren von WINS 㻟㻠㻡㻌㻛㻌㻢㻤㻝
0CC5-084 Einstellen von IPv6-Adressen Die IPv6-Adressen des Geräts können Sie über Remote UI konfigurieren. Überprüfen Sie die IPv4Adresseinstellungen ( Anzeigen von IPv4-Einstellungen), bevor Sie IPv6-Adressen einstellen. Sie müssen die richtigen IPv4-Einstellungen festlegen, wenn Sie IPv6-Adressen verwenden wollen. Beachten Sie, dass die Scanfunktion, die den Scannertreiber oder die MF Toolbox nutzt, in einer IPv6-Umgebung nicht zur Verfügung steht.
5 Aktivieren Sie das Kontrollkästchen [IPv6 verwenden], und konfigurieren Sie die erforderlichen Einstellungen. [IPv6 verwenden] Aktivieren Sie das Kontrollkästchen, um IPv6 am Gerät zu aktivieren. Wenn Sie IPv6 nicht verwenden, deaktivieren Sie das Kontrollkästchen. [Zustandslose Adresse] Aktivieren Sie das Kontrollkästchen, wenn Sie eine zustandslose Adresse verwenden. Wenn Sie keine zustandslose Adresse verwenden, deaktivieren Sie das Kontrollkästchen.
7 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. HINWEIS Überprüfen der Einstellungen Vergewissern Sie sich, dass am Computer der Remote UI-Bildschirm angezeigt werden kann, indem Sie die IPv6-Adresse des Starten von Remote UI Geräts verwenden. Verwenden des Bedienfelds Sie können auch über auf die IPv6-Einstellungen zugreifen.
0CC5-085 Anzeigen von Netzwerkeinstellungen Anzeigen von IPv4-Einstellungen Anzeigen von IPv6-Einstellungen Anzeigen der MAC-Adresse Anzeigen von Wireless LAN-Einstellungen und -Informationen (nur MF8580Cdw / MF8280Cw) HINWEIS Wenn "0.0.0.0" als IP-Adresse angezeigt wird, ist sie nicht korrekt konfiguriert. Wenn Sie das Gerät an einen Switching-Hub oder eine Bridge anschließen, kann es auch bei einer korrekt konfigurierten IPAdresse zu einem Kommunikationsfehler kommen.
Anzeigen von Wireless LAN-Einstellungen und -Informationen (nur MF8580Cdw / MF8280Cw) 1 2 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und die richtige PIN ein, und drücken Sie . Anmelden am Gerät dann 3 Wählen Sie , und drücken Sie .
0CC5-086 Konfigurieren des Geräts für das Drucken oder Faxen von einem Computer aus Wenn Sie das Gerät als Netzwerkdrucker oder zum Senden von Faxen vom PC aus verwenden, können Sie die Protokolle und Ports für das Drucken konfigurieren und einen Druckserver für das Gerät erstellen.
0CC5-087 Konfigurieren von Druckprotokollen und WSD-Funktionen Konfigurieren Sie die Protokolle für das Drucken von Dokumenten von einen Computer im Netzwerk aus. Das Gerät unterstützt unter anderem die Protokolle LPD, RAW und WSD (Web Services on Devices). HINWEIS Informationen zum Ändern der Portnummern eines Protokolls finden Sie in 1 2 Ändern von Portnummern. Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Speicherung].
[LPD Druck verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie über LPD drucken wollen. Wenn Sie das Drucken über LPD nicht verwenden, deaktivieren Sie das Kontrollkästchen. [RAW Druck verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie über RAW drucken wollen. Wenn Sie das Drucken über RAW nicht verwenden, deaktivieren Sie das Kontrollkästchen. 3 Klicken Sie auf [OK]. Konfigurieren von WSD 1 Klicken Sie in [Einstellungen WSD] auf [Bearbeiten...].
Kontrollkästchen deaktivieren, bleibt das Gerät auch dann im Schlafmodus, wenn Multicast-Discovery-Nachrichten im Netzwerk vorhanden sind. 3 5 Klicken Sie auf [OK]. Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. HINWEIS Verwenden des Bedienfelds Sie können auch über auf die LPD-, RAW- und WSD-Einstellungen zugreifen.
0CC5-088 Konfigurieren von Druckerports Es kann zu Fehlern beim Drucken kommen, wenn sich die IP-Adresse des Geräts geändert hat oder wenn über den WindowsDruckerordner ein Drucker hinzugefügt wurde. Diese Fehler sind normalerweise auf fehlerhafte Druckerporteinstellungen zurückzuführen. Eventuell wurde eine falsche Portnummer oder ein falscher Porttyp angegeben. In solchen Fällen schlägt das Drucken fehl, weil die Dokumentendaten nicht an das Gerät übertragen werden können.
3 Klicken Sie auf [Automatische Erkennung], wählen Sie das Gerät aus, sobald es erkannt wurde, und klicken Sie auf [Weiter]. HINWEIS: Wenn das Gerät nicht erkannt wird Klicken Sie auf [Aktualisieren]. Wenn das Problem erneut auftritt, klicken Sie auf [IP-Adresse] oder [MACAnzeigen von Netzwerkeinstellungen, und Adresse], geben Sie die IP- oder MAC-Adresse des Geräts ein klicken Sie dann auf [Weiter]. 4 Klicken Sie auf [Hinzufügen] 5 Klicken Sie auf [Schließen]. [Fertig stellen].
4 Klicken Sie auf [Schließen].
0CC5-089 Konfigurieren eines Druckservers Mit einem Druckserver können Sie die Arbeitslast auf dem zum Drucken verwendeten Computer verringern. Außerdem können die einzelnen Computer mit dem Druckserver die MF-Treiber über das Netzwerk installieren, sodass Sie sie nicht einzeln mit der CD-ROM auf jedem Computer installieren müssen. Wenn Sie einen Computer im Netzwerk als Druckserver einrichten möchten, konfigurieren Sie die Einstellungen für den freigegebenen Drucker.
HINWEIS: Wenn [Freigabeoptionen ändern] angezeigt wird Klicken Sie auf [Freigabeoptionen ändern]. Wenn das Dialogfeld [Benutzerkontensteuerung] angezeigt wird, klicken Sie auf [Ja] (oder [Fortsetzen]). 4 Installieren Sie bei Bedarf weitere Treiber. Dieser Schritt ist erforderlich, wenn Sie MF-Treiber über den Druckserver auf anderen Computern mit einer anderen Systemarchitektur installieren möchten. 1 Klicken Sie auf [Zusätzliche Treiber].
1 2 3 Suchen Sie den freigegebenen Drucker auf dem Druckserver. dem Druckserver Doppelklicken Sie auf den freigegebenen Drucker. Installieren Sie die Treiber nach den Bildschirmanweisungen.
0CC5-08A Konfigurieren des Geräts für das Senden gescannter Dokumente per E-Mail oder das Speichern in gemeinsamen Ordnern (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Wenn Sie gescannte Dokumente direkt vom Gerät aus per E-Mail senden oder in einem gemeinsamen Ordner speichern wollen, müssen Sie das Gerät entsprechend konfigurieren. Das mit dem Gerät gelieferte Tool für die Einstellung der Sendefunktion unterstützt Sie bei der erforderlichen Konfiguration.
0CC5-08C Konfigurieren des Geräts für das Senden gescannter Dokumente per E-Mail Bevor Sie das Gerät so konfigurieren, dass Sie nach dem Scannen eine E-Mail senden können, prüfen Sie die folgenden Konfigurationsschritte. Vergewissern Sie sich, dass das Gerät und der Computer richtig angeschlossen sind.
0CC5-08E Konfigurieren grundlegender E-Mail-Einstellungen Das Tool für die Einstellung der Sendefunktion unterstützt Sie beim Konfigurieren der E-Mail-Einstellungen. Mit diesem Tool können Sie auch E-Mail-Adressen im Adressbuch speichern. HINWEIS Remote UI bietet detailliertere Einstellungen als das Tool für die Einstellung der Sendefunktion ( Konfigurieren erweiterter EMail-Einstellungen).
HINWEIS: Wenn der unten abgebildete Bildschirm angezeigt wird Klicken Sie auf [Ja]. 5 Wählen Sie das Gerät unter [Geräteliste] aus, und klicken Sie auf [Weiter]. HINWEIS: Wenn das Gerät nicht unter [Geräteliste] angezeigt wird Klicken Sie auf [Erneut suchen]. Wenn das Problem erneut auftritt, klicken Sie auf [Durch IP-Adresse suchen], geben Sie die IP-Adresse des Geräts ein, und klicken Sie dann auf [OK]. 6 2 Überprüfen Sie die Einstellungen, und klicken Sie auf [OK]. Klicken Sie auf [Start].
Wenn ein Bildschirm erscheint, in dem Sie zur Eingabe der PIN für das Adressbuch aufgefordert werden, geben Sie die PIN für Festlegen einer PIN für das Adressbuch das Adressbuch ein, und klicken Sie auf [OK]. 4 Legen Sie die nötigen Einstellungen fest. [Speicherung] [Favoritennummer] Mit dem Tool für die Einstellung der Sendefunktion können Sie eine E-Mail-Adresse unter im Adressbuch speichern. Wählen Sie eine Nummer aus der Dropdown-Liste aus.
7 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. WICHTIG Je nach dem verwendeten Netzwerk sind unter Umständen zusätzliche Einstellungen erforderlich. Weitere Informationen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator. Informationen zum Aktivieren von SSL für E-Mails finden Sie in Zum Ändern der Portnummern schlagen Sie unter Konfigurieren erweiterter E-Mail-Einstellungen.
0CC5-08F Konfigurieren erweiterter E-Mail-Einstellungen Verwenden Sie Remote UI zum Konfigurieren detaillierter E-Mail-Einstellungen wie der POP-vor-SMTP-Authentisierung und der SSLVerschlüsselung. Weitere Informationen zu den erforderlichen Einstellungen erhalten Sie bei Ihrem Internetdienstanbieter oder Netzwerkadministrator. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Klicken Sie auf [Einstellungen/Speicherung].
[SMTP Serveradresse] Geben Sie bis zu 48 Zeichen für den Namen bzw. die Adresse des SMTP-Servers ein. [E-Mail-Adresse] Geben Sie bis zu 120 Zeichen für die E-Mail-Adresse ein, die für das Gerät verwendet werden soll. Konfigurieren von POP vor SMTP und der verschlüsselten Kommunikation mit dem POP-Server Die POP-vor-SMTP-Authentisierung verhindert, dass Unbefugte E-Mails senden können, da der Anwender zunächst über den POPServer authentisiert wird.
[SMTP Authentisierung (SMTP AUTH) verwenden] Aktivieren Sie das Kontrollkästchen, und geben Sie bis zu 64 Zeichen in das Textfeld [Anwendername] ein, wenn Sie die Authentisierung über den SMTP-Server aktivieren wollen. [Passwort einstellen/ändern] Geben Sie bis zu 32 Zeichen in das Textfeld [Passwort] ein, wenn Sie das Passwort festlegen oder ändern wollen. [SSL verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie die Kommunikation mit dem SMTP-Server mit SSL verschlüsseln wollen.
0CC5-08H Konfigurieren des Geräts für das Speichern gescannter Dokumente in gemeinsamen Ordnern Bevor Sie das Gerät so konfigurieren, dass Sie nach dem Scannen die Daten in einem freigegebenen Ordner speichern können, prüfen Sie die folgenden Konfigurationsschritte. Vergewissern Sie sich, dass das Gerät und der Computer richtig angeschlossen sind.
0CC5-08J Festlegen eines gemeinsamen Ordners als Speicherort Das Speichern gescannter Dokumente in gemeinsamen Ordnern wird auch als "SMB-Scan" bezeichnet, da bei dieser Funktion die SMBTechnologie (Server Message Block) von Windows genutzt wird. SMB ist ein Protokoll für die Freigabe von Ressourcen wie Dateien und Druckern für mehr als ein Gerät in einem Netzwerk ( Konfigurieren von SMB).
HINWEIS: Wenn der unten abgebildete Bildschirm angezeigt wird Klicken Sie auf [Ja]. 5 Wählen Sie das Gerät unter [Geräteliste] aus, und klicken Sie auf [Weiter]. HINWEIS: Wenn das Gerät nicht unter [Geräteliste] angezeigt wird Klicken Sie auf [Erneut suchen]. Wenn das Problem erneut auftritt, klicken Sie auf [Durch IP-Adresse suchen], geben Sie die IP-Adresse des Geräts ein, und klicken Sie dann auf [OK]. 6 2 Überprüfen Sie die Einstellungen, und klicken Sie auf [OK]. Klicken Sie auf [Start].
Wenn ein Bildschirm erscheint, in dem Sie zur Eingabe der PIN für das Adressbuch aufgefordert werden, geben Sie die PIN für Festlegen einer PIN für das Adressbuch das Adressbuch ein, und klicken Sie auf [OK]. 4 Legen Sie die nötigen Einstellungen fest. [Speicherung] [Favoritennummer] Mit dem Tool für die Einstellung der Sendefunktion können Sie einen gemeinsamen Ordner zum Speichern gescannter Dokumente unter im Adressbuch speichern. Wählen Sie eine Nummer aus der Dropdown-Liste aus.
[Beschränkungen für den gemeinsamen Ordner zulassen] Klicken Sie je nach den Zugriffseinschränkungen für den gemeinsamen Ordner auf das Optionsfeld [Nicht eingestellt] oder [Eingestellt]. Wenn Sie [Eingestellt] wählen, geben Sie den Anwendernamen in das Textfeld [Gespeicherter Anwendername] und das Passwort in das Textfeld [Zugangspasswort] ein. 5 6 7 Klicken Sie auf [Weiter]. Überprüfen Sie die Einstellungen, und klicken Sie auf [Registrieren]. Starten Sie das Gerät neu.
0CC5-08K Konfigurieren des Geräts für die Netzwerkumgebung Die Konfiguration eines Netzwerks hängt von seinem Verwendungszweck ab. Das Gerät ist auf Kompatibilität mit möglichst vielen Netzwerkkonfigurationen ausgelegt und mit einer Vielzahl von Technologien ausgestattet. Konfigurieren Sie das Gerät in Absprache mit Ihrem Netzwerkadministrator je nach Netzwerkkonfiguration.
0CC5-08L Konfigurieren von Etherneteinstellungen Ethernet ist ein Standard für die Übertragung von Daten in einem lokalen Netzwerk (LAN). Sie können den Kommunikationsmodus (Halb- oder Vollduplex) bzw. den Ethernettyp (10BASE-T/100BASE-TX) einstellen. Üblicherweise können Sie das Gerät ohne Änderungen an den Standardwerten ( Einstellungen Ethernettreiber) verwenden, Sie können die Einstellungen bei Bedarf aber auch an die Netzwerkumgebung anpassen. 1 2 Drücken Sie Wählen Sie mit .
LINKS Ändern der maximalen Übertragungseinheit Einstellen einer Wartezeit für die Netzwerkverbindung 㻟㻣㻣㻌㻛㻌㻢㻤㻝
0CC5-08R Ändern der maximalen Übertragungseinheit In den meisten Ethernetnetzwerken können Pakete mit einer Größe von maximal 1.500 Byte gesendet werden. Ein Paket ist hierbei eine Dateneinheit, in die die Originaldaten vor dem Senden unterteilt werden. Die maximale Übertragungseinheit (MTU, Maximum Transmission Unit) kann je nach Netzwerk variieren. Ändern Sie die Einstellung am Gerät nach Bedarf. Weitere Informationen erhalten Sie bei Ihrem Netzwerkadministrator. 1 2 Drücken Sie Wählen Sie mit .
0CC5-08S Einstellen einer Wartezeit für die Netzwerkverbindung In einem Netzwerk, in dem dank mehrerer Switching-Hubs oder Bridges redundante Verbindungen genutzt werden können, wird ein Mechanismus benötigt, der Übertragungsschleifen beim Übermitteln von Paketen verhindert. Eine wirksame Lösung besteht darin, die Rolle jedes Switchports zu definieren.
0CC5-08U Konfigurieren von DNS DNS (Domain Name System) bietet einen Dienst für die Namensauflösung zur Zuordnung von Host- oder Domänennamen zu IPAdressen. Konfigurieren Sie die DNS-, mDNS- oder DHCP-Einstellungen nach Bedarf. Beachten Sie, dass sich das Vorgehen beim Konfigurieren von DNS bei IPv4 und IPv6 unterscheidet. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Klicken Sie auf [Einstellungen/Speicherung].
[Einstellungen DNS] [Adresse primärer DNS Server] Geben Sie die IP-Adresse eines DNS-Servers ein. [Adresse sekundärer DNS Server] Geben Sie die IP-Adresse eines sekundären DNS-Servers ein, sofern vorhanden. [Hostname] Geben Sie bis zu 47 alphanumerische Zeichen für den Hostnamen des Geräts ein, der beim DNS-Server registriert werden soll. [Domänname] Geben Sie bis zu 47 alphanumerische Zeichen für die Domäne ein, zu der das Gerät gehört, wie beispielsweise "beispiel.de.
2 Konfigurieren Sie die IPv6-DNS-Einstellungen. Das Kontrollkästchen [IPv6 verwenden] muss aktiviert sein, damit Sie die Einstellungen konfigurieren können. Einstellen von IPv6-Adressen [Einstellungen DNS] [Adresse primärer DNS Server] Geben Sie die IP-Adresse eines DNS-Servers ein. Adressen, die mit "ff" anfangen (oder Multicast-Adressen), können Sie nicht eingeben. [Adresse sekundärer DNS Server] Geben Sie die IP-Adresse eines sekundären DNS-Servers ein, sofern vorhanden.
5 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. HINWEIS Sie können auch über auf die DNS-Einstellungen zugreifen.
0CC5-08W Konfigurieren von SMB SMB (Server Message Block) ist ein Protokoll für die Freigabe von Ressourcen wie Dateien und Druckern für mehr als ein Gerät in einem Netzwerk. Das Gerät verwendet SMB zum Speichern gescannter Dokumente in einem gemeinsamen Ordner. Je nach Netzwerk müssen Sie eventuell den NetBIOS- und den WorkgroupNamen einstellen.
5 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK]. [Name NetBIOS] Geben Sie bis zu 15 alphanumerische Zeichen für den NetBIOS-Namen des Geräts ein. [Name Workgroup] Geben Sie bis zu 15 alphanumerische Zeichen für den Namen der Workgroup ein, zu der das Gerät gehört. WICHTIG: NetBIOS- oder Workgroup-Namen, die mit einem Stern (*) anfangen, können bei einem WINS-Server nicht registriert werden. 6 Starten Sie das Gerät neu.
0CC5-08X Konfigurieren von WINS WINS (Windows Internet Name Service) ermöglicht als Dienst für die Namensauflösung die Zuordnung von NetBIOS-Namen (Computeroder Druckername in einem SMB-Netzwerk) zu IP-Adressen. Wenn Sie WINS aktivieren möchten, müssen Sie den WINS-Server angeben. WICHTIG Damit Sie WINS-Servereinstellungen angeben können, müssen der NetBIOS- und der Workgroup-Name eingestellt werden. Konfigurieren von SMB Diese Funktion steht in IPv6-Netzwerken nicht zur Verfügung.
[WINS Auflösung] Aktivieren Sie das Kontrollkästchen, um WINS für die Namensauflösung zu verwenden. Wenn Sie WINS nicht verwenden, deaktivieren Sie das Kontrollkästchen. [WINS Serveradresse] Geben Sie die IP-Adresse des WINS-Servers ein. WICHTIG: Wenn die IP-Adresse des WINS-Servers von einem DHCP-Server abgerufen wird, hat die abgerufene IP-Adresse Vorrang vor der in das Textfeld [WINS Serveradresse] eingegebenen IP-Adresse.
0CC5-08Y Speichern von LDAP-Servern (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Wenn im Netzwerk ein LDAP-Server implementiert ist, können Sie auf dem Server nach Faxnummern und EMail-Adressen suchen und diese als Empfänger angeben oder im Adressbuch speichern. Sie können maximal fünf LDAP-Server im Gerät speichern. Verwenden Sie Remote UI zum Speichern von LDAP-Servern. HINWEIS Das Gerät unterstützt Windows Server 2003/Server 2008/Server 2012 Active Directory als LDAP-Server.
HINWEIS: So bearbeiten Sie gespeicherte Serverinformationen Klicken Sie auf einen Textlink unter [Servername], um den Bearbeitungsbildschirm anzuzeigen. So löschen Sie gespeicherte Serverinformationen Klicken Sie rechts neben dem Namen des zu löschenden Servers auf [Löschen] 5 klicken Sie auf [OK]. Legen Sie die nötigen Einstellungen fest. [Servername] Geben Sie bis zu 24 alphanumerische Zeichen zur Identifizierung des LDAP-Servers ein.
[Login Informationen] Wählen Sie [Nicht verwenden], [Verwenden] oder [Verwenden (Sicherheitsauthentisierung)], je nach dem vom LDAP-Server implementierten Authentisierungstyp. Wenn Sie [Verwenden] oder [Verwenden (Sicherheitsauthentisierung)] auswählen, müssen Sie den Anwendernamen und das Passwort angeben. [Nicht verwenden] Wählen Sie diese Einstellung, wenn das Gerät nicht anhand der Login-Informationen authentisiert werden soll.
0CC5-090 Konfigurieren von SNTP SNTP (Simple Network Time Protocol) ermöglicht die Einstellung der Systemuhr über einen Zeitserver im Netzwerk. Das Protokoll wird üblicherweise zum Synchronisieren des Geräts mit einem Server verwendet, wenn beispielsweise das Gerät auf einen LDAP-Server mit aktivierter Sicherheitsauthentisierung zugreifen muss.
[SNTP verwenden] Aktivieren Sie das Kontrollkästchen, um SNTP für die Synchronisation zu verwenden. Wenn Sie SNTP nicht verwenden, deaktivieren Sie das Kontrollkästchen. [NTP Servername] Geben Sie die IP-Adresse des NTP- oder SNTP-Servers ein. Wenn im Netzwerk DNS zur Verfügung steht, können Sie stattdessen einen Hostnamen (oder FQDN) mit bis zu 255 alphanumerische Zeichen eingeben (Beispiel: ntp.beispiel.de). [Abruf-Intervall] Legen Sie das Intervall zwischen den Synchronisationsvorgängen fest.
0CC5-091 Überwachen und Steuern des Geräts mit SNMP SNMP (Simple Network Management Protocol) ist ein Protokoll zum Überwachen und Steuern von Kommunikationsgeräten in einem Netzwerk über die MIB (Management Information Base). Das Gerät unterstützt SNMPv1 und das mit Sicherheitsmechanismen ausgestattete SNMPv3. Sie können den Status des Geräts von einem Computer aus anzeigen, wenn Sie Dokumente drucken oder Remote UI verwenden. Sie können SNMPv1 oder SNMPv3 oder beide Versionen gleichzeitig aktivieren.
4 Klicken Sie auf [Bearbeiten...]. 5 Legen Sie die SNMPv1-Einstellungen fest. Wenn Sie die SNMPv1-Einstellungen nicht ändern müssen, fahren Sie mit dem nächsten Schritt fort. [SNMPv1 verwenden] Aktivieren Sie das Kontrollkästchen, um SNMPv1 zu aktivieren. Sie können die übrigen SNMPv1-Einstellungen nur festlegen, wenn das Kontrollkästchen aktiviert ist. [Name Arbeitsgruppe 1 verwenden]/[Name Arbeitsgruppe 2 verwenden] Aktivieren Sie das Kontrollkästchen, um einen Community-Namen festzulegen.
[Nur Lesen (RO)] Erlaubt nur das Anzeigen der Werte von MIB-Objekten. [Zugewiesene Arbeitsgruppe verwenden] Die vordefinierte Community "Zugewiesene Arbeitsgruppe" ist ausschließlich für Administratoren vorgesehen, die Canon Software wie imageWARE Enterprise Management Console verwenden. Aktivieren Sie das Kontrollkästchen, um die zugewiesene Arbeitsgruppe zu verwenden. Wenn Sie die zugewiesene Arbeitsgruppe nicht verwenden, deaktivieren Sie das Kontrollkästchen.
1 Aktivieren Sie das Kontrollkästchen [SNMPv3 verwenden]. 2 Aktivieren Sie das Kontrollkästchen [Anwender aktivieren], und legen Sie die Einstellungen [Anwendername], [MIB Zugangserlaubnis] und [Sicherheitseinstellungen] fest. Bis zu drei Anwender können gespeichert werden. 3 Legen Sie die gewünschten Authentisierungs- und Verschlüsselungseinstellungen fest.
[Druckerverwaltungsinformationen vom Host erfassen] Aktivieren Sie das Kontrollkästchen, um die Überwachung der Druckerverwaltungsinformationen des Geräts über SNMP zu aktivieren. Wenn Sie die Überwachung der Druckerverwaltungsinformationen deaktivieren wollen, deaktivieren Sie das Kontrollkästchen. 8 9 Klicken Sie auf [OK]. Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
0CC5-092 Konfigurieren der SLP-Kommunikation mit imageWARE Sie können die Erfassung und die Verwaltung verschiedener Informationen über vernetzte Geräte erleichtern, indem Sie Geräteverwaltungssoftware wie imageWARE Enterprise Management Console * im Netzwerk implementieren. Informationen wie Geräteeinstellungen, Adressbücher und Fehlerlogs werden abgerufen und über den Servercomputer verteilt.
2 Aktivieren Sie das Kontrollkästchen [Antwort an Discovery], und legen Sie die erforderlichen Einstellungen fest. [Antwort an Discovery] Aktivieren Sie das Kontrollkästchen, wenn das Gerät auf Multicast-Discovery-Pakete von imageWARE reagieren soll und die Überwachung mit imageWARE aktiviert werden soll. [Name Scope] Geben Sie bis zu 32 Zeichen für den Scope-Namen ein, wenn das Gerät zu einem bestimmten Scope gehören soll. 3 Klicken Sie auf [OK].
[Benachrichtigen] Aktivieren Sie das Kontrollkästchen, wenn imageWARE über den Stromversorgungsstatus des Geräts benachrichtigt werden soll. Wenn Sie [Benachrichtigen] wählen, können Sie unnötige Kommunikationsversuche des Geräts während des Schlafmodus vermeiden und so den Stromverbrauch insgesamt senken. [Portnummer] Ändern Sie die Portnummer für diese Funktion je nach der Netzwerkumgebung.
0CC5-093 Sicherheit Mit informationstechnischen Geräten wie Computern und Druckern werden überall vertrauliche Informationen verarbeitet, und alle diese Geräte können das Ziel von böswilligen Angriffen werden. Angreifer können direkt unbefugten Zugriff auf die Geräte erlangen oder indirekt Nachlässigkeit oder eine unsachgemäße Handhabung ausnutzen. In jedem Fall kann die Preisgabe vertraulicher Informationen zu unerwarteten Verlusten führen.
0CC5-094 Schützen des Geräts vor unbefugtem Zugriff Sie können verhindern, dass unbefugte Dritte auf das Gerät zugreifen und es verwenden. Dazu stehen verschiedene Sicherheitsmaßnahmen zur Verfügung, wie das Verwalten der Zugriffsrechte der Anwender, die Verwendung von Firewalls und das Ändern von Portnummern.
0CC5-095 Festlegen von Zugriffsrechten Schützen Sie das Gerät vor unbefugtem Zugriff, indem Sie nur Anwendern mit entsprechenden Zugriffsrechten die Verwendung gestatten. Zugriffsrechte werden für jedes Konto bzw. jede "ID" einzeln erteilt. Sie können für jede ID eine PIN einstellen.
0CC5-096 Einstellen der Systemmanager-ID Speichern Sie die Systemmanager-ID, eine ausschließlich für Administratoren vorgesehene ID. Sie können auch eine PIN für die Systemmanager-ID festlegen. Wenn diese ID aktiviert ist, müssen Sie für den Zugriff auf und die Systemmanager-ID und die PIN korrekt eingeben.
Informationen Anmelden am Gerät Wenn nur die Systemmanager-ID aktiviert ist und Sie auf oder zugreifen, wird der folgende Anmeldebildschirm angezeigt.
0CC5-097 Einstellen der Verwaltung per Abteilungs-IDs Sie können den Zugriff auf das Gerät mithilfe verschiedener IDs für verschiedene Anwender oder Gruppen steuern. Wenn die Verwaltung per Abteilungs-ID aktiviert ist und ein Anwender versucht, das Gerät zu benutzen, wird ein Anmeldebildschirm angezeigt, und der Anwender muss eine korrekte Abteilungs-ID sowie die passende PIN eingeben, bevor er das Gerät verwenden kann.
2 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK]. [Abteilungs-ID] Geben Sie eine maximal 7-stellige Zahl für die Abteilungs-ID ein. [PIN einstellen] Aktivieren Sie das Kontrollkästchen, und geben Sie eine maximal 7-stellige Zahl in die Textfelder [PIN] und [Bestätigen] ein, wenn Sie eine PIN festlegen wollen. [Funktionen beschränken] Aktivieren Sie das Kontrollkästchen für die Funktion, die Sie für die Abteilungs-ID deaktivieren wollen.
1 2 Klicken Sie auf [Einstellungen/Speicherung]. 3 Klicken Sie auf [Verwaltung Abteilungs-ID] 4 Aktivieren Sie das Kontrollkästchen [Verwaltung Abteilungs-ID], und klicken Sie auf [OK]. [Bearbeiten...]. [Verwaltung Abteilungs-ID] Aktivieren Sie das Kontrollkästchen, um die Verwaltung per Abteilungs-IDs zu aktivieren. Wenn Sie die Verwaltung per AbteilungsIDs nicht verwenden, deaktivieren Sie das Kontrollkästchen.
Einstellen der Verwaltung per Abteilungs-IDs für das Drucken oder Faxen von einem Computer aus Wenn Sie die Verwaltung per Abteilungs-IDs für das Drucken oder Faxen von einem Computer aus aktivieren wollen, müssen Sie mit den bereits auf dem Computer installierten Treibern bestimmte Einstellungen festlegen. Geben Sie gegebenenfalls die Abteilungs-ID und PIN an. WICHTIG Melden Sie sich für die folgenden Schritte als Benutzer mit Administratorrechten am Computer an. 1 2 3 Öffnen Sie den Druckerordner.
[PIN-Festlegung zulassen] Aktivieren Sie das Kontrollkästchen, um die PIN-Einstellung zu aktivieren. [Abteilungs-ID] Geben Sie eine maximal 7-stellige Zahl für die Abteilungs-ID ein. [PIN] Geben Sie eine maximal 7-stellige Zahl für die PIN ein, wenn für die Abteilungs-ID eine PIN festgelegt ist. [Überprüfen] Klicken Sie hier, um zu überprüfen, ob die richtige ID und PIN eingegeben wurden.
3 Klicken Sie auf [Verwaltung Abteilungs-ID] 4 Deaktivieren Sie die Kontrollkästchen nach Bedarf, und klicken Sie auf [OK]. [Bearbeiten...]. [Druckaufträge mit unbekannten IDs zulassen] Um von einem Computer zu drucken, wenn die Verwaltung per Abteilungs-ID aktiviert ist, müssen Sie die richtige ID und PIN beim Druckertreiber eingeben ( Einstellen der Verwaltung per Abteilungs-IDs für das Drucken oder Faxen von einem Computer aus).
0CC5-098 Einschränken der Kommunikation mithilfe von Firewalls Ohne ausreichende Sicherheitsmaßnahmen können unbefugte Dritte auf Computer und andere Kommunikationsgeräte in einem Netzwerk zugreifen. Sie können unbefugte Zugriffe unterbinden, indem Sie Einstellungen für den Paketfilter festlegen, sodass die Kommunikation nur noch mit den Geräten möglich ist, die die angegebenen IP- oder MAC-Adressen aufweisen.
0CC5-099 Angeben von IP-Adressen für Firewallregeln Sie können die Kommunikation nur mit Geräten mit bestimmten IP-Adressen zulassen oder Geräte mit bestimmten IP-Adressen blockieren. Dazu können Sie eine einzelne IP-Adresse oder einen Bereich von IP-Adressen angeben. HINWEIS Bis zu 16 IP-Adressen (oder Bereiche von IP-Adressen) können für IPv4 und IPv6 angegeben werden. Die in diesem Abschnitt beschriebenen Paketfilter steuern die Kommunikation über TCP, UDP und ICMP.
[IPv4-Adresse: Eingangsfilter] Legen Sie fest, ob das Empfangen von Daten von einem Computer am Gerät über die Angabe von IPv4-Adressen beschränkt werden soll. [IPv6-Adresse: Ausgangsfilter] Legen Sie fest, ob das Senden von Daten vom Gerät an einen Computer über die Angabe von IPv6-Adressen beschränkt werden soll. [IPv6-Adresse: Eingangsfilter] Legen Sie fest, ob das Empfangen von Daten von einem Computer am Gerät über die Angabe von IPv6-Adressen beschränkt werden soll.
Adressbereichs Angeben eines Adressbereichs mit einem Präfix 192.168.0.20 Geben Sie die Adresse gefolgt von einem Schrägstrich und einer Zahl zur Angabe der Präfixlänge ein. 192.168.0.32/27 fe80::1234/64 Wenn Sie für einen Ausgangsfilter die Einstellung [Zurückweisen] gewählt haben Ausgehende Multicast- und Rundsendungspakete können nicht gefiltert werden. Löschen von IP-Adressen aus den Ausnahmen Wählen Sie eine IP-Adresse, und klicken Sie auf [Löschen]. 3 6 Klicken Sie auf [OK].
0CC5-09A Angeben von MAC-Adressen für Firewallregeln Sie können die Kommunikation nur mit Geräten mit bestimmten MAC-Adressen zulassen oder Geräte mit bestimmten MAC-Adressen blockieren. Dazu können Sie bis zu 32 MAC-Adressen angeben. WICHTIG Diese Funktion steht nicht zur Verfügung, wenn das Gerät mit einem Wireless LAN verbunden ist. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Speicherung].
Wählen Sie die Vorbedingung (Standardrichtlinie), um die Kommunikation von anderen Geräten mit diesem Gerät zuzulassen oder abzulehnen, und legen Sie dann MAC-Adressen für die Ausnahmen fest. 1 Aktivieren Sie das Kontrollkästchen [Filter verwenden], und klicken Sie auf das Optionsfeld [Zurückweisen] oder [Zulassen] für die [Standardrichtlinie]. [Filter verwenden] Aktivieren Sie das Kontrollkästchen, um die Kommunikation zu beschränken.
HINWEIS Sie können die Einstellungen für die IP-Adressfilterung über aktivieren oder deaktivieren.
0CC5-09C Ändern von Portnummern Ports fungieren als Endpunkte für die Kommunikation mit anderen Geräten. Üblicherweise werden für die wichtigsten Protokolle standardisierte Portnummern verwendet, aber Geräte, die diese Portnummern verwenden, sind anfällig für Angriffe, weil diese Portnummern allgemein bekannt sind. Zum Verbessern der Sicherheit kann Ihr Netzwerkadministrator die Portnummern ändern.
0CC5-09E Einstellen eines Proxyservers Ein Proxyserver (bzw. HTTP-Proxyserver) ist ein Computer oder eine Software, die die HTTP-Kommunikation für andere Geräte abwickelt, insbesondere bei der Kommunikation mit Ressourcen außerhalb des Netzwerks, also beispielsweise beim Browsen auf Websites. Die Clientgeräte stellen die Verbindung zum externen Netzwerk über den Proxyserver her und kommunizieren nicht direkt mit den externen Ressourcen.
[Proxy verwenden] Aktivieren Sie das Kontrollkästchen, wenn Sie den angegebenen Proxyserver bei der Kommunikation mit einem HTTP-Server verwenden wollen. [HTTP Adresse Proxy-Server] Geben Sie die Adresse des Proxyservers ein. Geben Sie je nach Umgebung die IP-Adresse oder den Hostnamen an. [HTTP Portnummer Proxy-Server] Ändern Sie nötigenfalls die Portnummer. Geben Sie eine Portnummer zwischen 1 und 65535 ein.
0CC5-09F Einschränken der Gerätefunktionen Einige der Funktionen des Geräts werden unter Umständen kaum verwendet oder bieten sich für eine missbräuchliche Verwendung an. Die Funktionen des Geräts können daher aus Sicherheitsgründen teilweise oder komplett deaktiviert werden.
0CC5-09H Einschränken des Zugriffs auf das Adressbuch und die Sendefunktionen (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Bestimmte Formen der ungewollten Preisgabe von Informationen lassen sich verhindern, wenn Sie die verfügbaren Fax- und E-MailEmpfänger auf die im Adressbuch oder auf LDAP-Servern gespeicherten Empfänger einschränken oder für das Adressbuch eine PIN festlegen, sodass unbefugte Anwender Adressbucheinträge nicht hinzufügen oder bearbeiten können.
0CC5-09J Festlegen einer PIN für das Adressbuch Das Adressbuch können Sie so einstellen, dass Anwender zum Hinzufügen neuer oder zum Bearbeiten vorhandener Einträge eine PIN eingeben müssen. Durch das Festlegen einer PIN für das Adressbuch können Sie das Risiko verringern, dass Dokumente an unbeabsichtigte Empfänger gesendet werden, da Änderungen am Adressbuch dann nur von Anwendern vorgenommen werden können, die die PIN kennen. 1 2 Drücken Sie .
0CC5-09K Einschränken der verfügbaren Empfänger Indem Sie beim Senden von Dokumenten die auswählbaren Faxnummern auf Einträge einschränken, die bereits im Adressbuch gespeichert sind, bereits verwendet wurden oder auf den LDAP-Servern gesucht werden können, verringern Sie das Risiko, dass falsche Empfänger angegeben und Informationen so ungewollt preisgegeben werden.
0CC5-09L Unterbinden von PC-Faxen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Sie können verhindern, dass Anwender die PC-Faxfunktion für das Senden von Faxen vom Computer aus nutzen. 1 2 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und die richtige PIN ein, und drücken Sie .
0CC5-09R Deaktivieren der Verwendung von zuvor verwendeten Empfängern Sie können die Auswahl zuvor verwendeter Empfänger und Einstellungen aus den Übertragungsdatensätzen zum Faxen oder zum Versenden gescannter Dokumente per E-Mail und das Speichern in einem gemeinsamen Ordner deaktivieren. 1 2 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie .
0CC5-09S Überprüfen von Empfängern vor dem Senden von Dokumenten Indem Sie die Faxnummer zweimal eingeben, können Sie das Risiko reduzieren, dass Dokumente aufgrund von Eingabefehlern an die falsche Nummer gefaxt werden. Verwenden Sie die in diesem Abschnitt beschriebenen Funktionen, wenn Sie vertrauliche Dokumente senden möchten.
Der Bildschirm mit den Details zu der eingegebenen Nummer für die kodierte Wahl wird nicht angezeigt. Der Bildschirm mit den Details zu der eingegebenen Nummer für die kodierte Wahl wird angezeigt. 5 Drücken Sie .
0CC5-09U Unterbinden von Rundsendungen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Bei Rundsendungen werden Faxe nacheinander an mehrere Empfänger gesendet. Diese Funktion kann bei Bedarf deaktiviert werden. 1 2 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie . Wenn der Anmeldebildschirm erscheint, geben Sie mit den Zahlentasten die richtige ID und die richtige PIN ein, und drücken Sie .
0CC5-09W Einschränken von USB-Funktionen Per USB lassen sich Peripheriegeräte problemlos anschließen und Daten einfach speichern oder verschieben, aber ohne angemessene Verwaltung können über USB auch ungewollt Informationen preisgegeben werden. Seien Sie im Umgang mit USB-Speichergeräten besonders vorsichtig. Dieser Abschnitt beschreibt, wie die Verbindung über den USB-Anschluss des Geräts beschränkt wird und wie die Verwendung von USB-Speichergeräten verhindert wird.
3 4 Wählen Sie , und drücken Sie Wählen Sie , und drücken Sie . . Diese Option verhindert, dass Daten auf einem USB-Speichergerät gespeichert werden. Gescannte Daten können nicht auf dem USB-Speichergerät gespeichert werden. Erlaubt das Speichern von Daten auf einem USB-Speichergerät. 5 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN.
0CC5-09X Deaktivieren der HTTP-Kommunikation HTTP wird für die Kommunikation über das Netzwerk verwendet, also beispielsweise beim Zugriff auf das Gerät über Remote UI. Wenn Sie eine USB-Verbindung verwenden oder HTTP aus einem anderen Grund nicht verwenden, können Sie HTTP deaktivieren und so böswillige Angriffe Dritter über den nicht genutzten HTTP-Port blockieren.
0CC5-09Y Deaktivieren von Remote UI Remote UI ist nützlich, wenn Sie die Geräteeinstellungen über einen Webbrowser auf einem Computer festlegen können. Das Gerät muss mit einem Computer im Netzwerk verbunden sein, damit Sie Remote UI verwenden können. Wenn das Gerät über USB mit einem Computer verbunden ist oder wenn Sie Remote UI nicht benötigen, können Sie Remote UI deaktivieren und so das Risiko verringern, dass ein böswilliger Dritter das Gerät über das Netzwerk fernsteuert.
0CC5-0A1 Implementieren robuster Sicherheitsfunktionen Böswillige Angriffe können bei autorisierten Anwendern zu unerwarteten Verlusten führen, wenn Daten bei der Übermittlung über ein Netzwerk per Sniffing oder Spoofing abgefangen und manipuliert werden. Das Gerät unterstützt die folgenden Funktionen, mit denen Sie für mehr Sicherheit sorgen und wertvolle Informationen vor solchen Angriffen schützen können.
0CC5-0A2 Aktivieren der Kommunikation mit SSL-Verschlüsselung für Remote UI Mit SSL (Secure Sockets Layer) können Sie die Kommunikation zwischen dem Gerät und einem Webbrowser auf dem Computer verschlüsseln. SSL ist ein Protokoll für die Verschlüsselung der über ein Netzwerk gesendeten oder empfangenen Daten. SSL muss aktiviert sein, wenn Sie über Remote UI die Einstellungen für IPSec (Methode Pre-gemeinsamer Schlüssel), die IEEE 802.1XAuthentisierung (TTLS/PEAP) oder SNMPv3 festlegen.
HINWEIS: Anzeigen von Details zu Zertifikaten Sie können die Details zu dem Zertifikat anzeigen oder das Zertifikat verifizieren, indem Sie unter [Schlüsselname] auf den Verifizieren von Schlüsselpaaren und digitalen Zertifikaten entsprechenden Textlink oder das Zertifikatsymbol klicken. 6 7 Aktivieren Sie SSL für Remote UI. 1 Klicken Sie auf [Sicherheitseinstellungen] 2 Klicken Sie auf [Bearbeiten...]. 3 Aktivieren Sie das Kontrollkästchen [SSL verwenden], und klicken Sie auf [OK].
Starten von Remote UI mit SSL Wenn SSL aktiviert ist und Sie versuchen, Remote UI zu starten, wird möglicherweise eine Sicherheitswarnung zum Sicherheitszertifikat angezeigt. Überprüfen Sie in diesem Fall, ob die richtige URL in das Adressfeld eingegeben ist, und fahren Sie Starten von Remote UI dann fort, um den Remote UI-Bildschirm aufzurufen.
0CC5-0A3 Konfigurieren von IPSec-Einstellungen Internet Protocol Security (IPSec oder IPsec) ist eine Protokollsuite für die Verschlüsselung der über Netzwerke und Internet-Netzwerke übermittelten Daten. Während SSL nur Daten verschlüsselt, die in einer bestimmten Anwendung wie einem Webbrowser oder einer EMail-Anwendung verwendet werden, verschlüsselt IPSec ganze IP-Pakete oder die Nutzdaten von IP-Paketen und stellt somit ein flexibleres Sicherheitssystem als SSL bereit.
Konfigurieren von IPSec-Einstellungen Bevor Sie IPSec für die verschlüsselte Kommunikation verwenden können, müssen Sie Sicherheitsrichtlinien speichern. Eine Sicherheitsrichtlinie besteht aus Gruppen von Einstellungen (siehe die Erläuterungen unten). Bis zu 10 Richtlinien können gespeichert werden. Geben Sie nach dem Speichern von Richtlinien an, in welcher Reihenfolge diese angewendet werden sollen.
5 Aktivieren Sie das Kontrollkästchen [IPSec verwenden], und klicken Sie auf [OK]. Wenn das Gerät nur Pakete empfangen soll, die einer der in den Schritten unten festgelegten Sicherheitsrichtlinien entsprechen, deaktivieren Sie das Kontrollkästchen [Empfang von Paketen ohne Richtlinie]. 6 Klicken Sie auf [Neue Richtlinie speichern...]. 7 Legen Sie die Einstellungen für die Richtlinie fest. 8 1 Geben Sie in das Textfeld [Name Richtlinie] bis zu 24 alphanumerische Zeichen für den Richtliniennamen ein.
[Lokale Adresse] Klicken Sie auf das Optionsfeld für den IP-Adresstyp dieses Geräts, auf den die Richtlinie angewendet werden soll. [Alle IPAdressen] Wählen Sie diese Einstellung, wenn IPSec für alle IP-Pakete verwendet werden soll. [IPv4-Adresse] Wählen Sie diese Einstellung, wenn IPSec für alle an die und von der IPv4-Adresse des Geräts gesendeten IP-Pakete verwendet werden soll.
Angeben eines Adressbereichs Fügen Sie zwischen den Adressen einen Bindestrich ein. 192.168.0.10192.168.0.20 Angeben eines Adressbereichs mit einem Präfix (nur IPv6) Geben Sie die Adresse gefolgt von einem Schrägstrich und einer Zahl zur Angabe der Präfixlänge ein. fe80::1234/64 [Einstellungen Subnet] Wenn Sie manuell IPv4-Adressen festlegen, können Sie den Bereich über die Subnetmaske ausdrücken. Geben Sie die Subnetmaske mit Punkten zur Trennung der Zahlen ein (Beispiel: "255.255.255.240").
3 Legen Sie die Einstellungen für [Gültig für] und [Authentisierung]/[Verschlüsselung]/[DH Gruppe] fest. Verwenden eines Schlüsselpaars und vorinstallierter Zertifizierungsstellenzertifikate für die Authentisierung 1 Klicken Sie für [Authentisierungsmethode] auf das Optionsfeld [Methode digitale Signatur], und klicken Sie dann auf [Schlüssel und Zertifikat...]. 2 Klicken Sie rechts neben einem zu verwendenden Schlüsselpaar auf [Standardschlüssel speichern].
[Algorithmus wählen] Aktivieren Sie je nach dem verwendeten IPSec-Header und Algorithmus die Kontrollkästchen [ESP], [ESP (AES-GCM)] und [AH (SHA1)]. AES-GCM ist ein Algorithmus für Authentisierung und Verschlüsselung. Wenn Sie [ESP] wählen, wählen Sie zusätzlich die Algorithmen für Authentisierung und Verschlüsselung aus den Dropdown-Listen [ESP Authentisierung] und [ESP Verschlüsselung] aus. [ESP Authentisierung] Wenn Sie die ESP-Authentisierung aktivieren wollen, wählen Sie [SHA1] als Hash-Algorithmus.
0CC5-0A4 Konfigurieren der IEEE 802.1X-Authentisierung Das Gerät kann als Client mit einem 802.1X-Netzwerk verbunden werden. Ein 802.1X-Netzwerk besteht normalerweise aus einem RADIUS-Server (Authentisierungsserver), einem LAN-Switch (Authenticator) und Clientgeräten mit Authentisierungssoftware (Supplicants). Wenn ein Gerät versucht, eine Verbindung zu einem 802.
4 5 Klicken Sie auf [Bearbeiten...]. Aktivieren Sie das Kontrollkästchen [IEEE 802.1X verwenden], geben Sie den Login-Namen in das Textfeld [Login-Name] ein, und legen Sie die erforderlichen Einstellungen fest. [IEEE 802.1X verwenden] Aktivieren Sie das Kontrollkästchen, um die IEEE 802.1X-Authentisierung zu aktivieren. [Login-Name] Geben Sie bis zu 24 alphanumerische Zeichen für den Namen (EAP-Identität) ein, der zum Identifizieren des Anwenders dient.
HINWEIS: Anzeigen von Details zu Schlüsselpaaren oder Zertifikaten Sie können die Details zu dem Zertifikat anzeigen oder das Zertifikat verifizieren, indem Sie unter [Schlüsselname] auf Verifizieren von Schlüsselpaaren und digitalen den entsprechenden Textlink oder auf das Zertifikatsymbol klicken. Zertifikaten Einstellen von TTLS/PEAP 1 Aktivieren Sie das Kontrollkästchen [TTLS verwenden] oder [PEAP verwenden]. HINWEIS: Internes Protokoll für TTLS Sie können MSCHAPv2 oder PAP wählen.
[Anwendername] Geben Sie bis zu 24 alphanumerische Zeichen für den Anwendernamen ein. [Passwort ändern] Zum Festlegen oder Ändern des Passworts aktivieren Sie das Kontrollkästchen, und geben Sie bis zu 24 alphanumerische Zeichen für das neue Passwort in die Textfelder [Passwort] und [Bestätigen] ein. 6 Klicken Sie auf [OK]. 7 Starten Sie das Gerät neu. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. HINWEIS Sie können die IEEE 802.
0CC5-0A5 Konfigurieren von Einstellungen für Schlüsselpaare und digitale Zertifikate Um die Kommunikation mit einem Remotegerät zu verschlüsseln, muss zuvor ein Verschlüsselungsschlüssel über ein ungesichertes Netzwerk gesendet und empfangen werden. Dieses Problem wird mit dem Public-Key-Verschlüsselungsverfahren behoben.
0CC5-0A6 Generieren von Schlüsselpaaren Sie können mit dem Gerät ein Schlüsselpaar generieren, wenn dies für die verschlüsselte Kommunikation über SSL (Secure Sockets Layer) erforderlich ist. Sie können SSL verwenden, wenn Sie über Remote UI auf das Gerät zugreifen. Bis zu fünf Schlüsselpaare können im Gerät registriert werden. 1 2 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Starten von Remote UI Klicken Sie auf [Einstellungen/Speicherung].
[Einstellungen Schlüssel] [Schlüsselname] Geben Sie bis zu 24 alphanumerische Zeichen als Namen für das Schlüsselpaar ein. Geben Sie einen Namen ein, den Sie später in einer Liste leicht wiederfinden können. [Signaturalgorithmus] Wählen Sie den Signaturalgorithmus aus der Dropdown-Liste aus. [Schlüsselalgorithmus] RSA wird zur Generierung eines Schlüsselpaars verwendet. Wählen Sie die Schlüssellänge aus der Dropdown-Liste aus. Je höher die Zahl der Schlüsselstärke, desto langsamer ist die Kommunikation.
0CC5-0A7 Verwenden von Schlüsselpaaren und digitalen Zertifikaten, die von einer Zertifizierungsstelle ausgegeben wurden Schlüsselpaare und digitale Zertifikate für die Verwendung mit dem Gerät können Sie bei einer Zertifizierungsstelle erhalten. Sie können diese Dateien mit Remote UI speichern und im Gerät registrieren. Vergewissern Sie sich, dass Schlüsselpaare und digitale Zertifikate die Anforderungen des Geräts erfüllen ( Anforderungen für Schlüssel und Zertifikate).
Schlüsselpaar, bevor Sie es löschen. Das vorinstallierte Zertifizierungsstellenzertifikat kann nicht gelöscht werden. Deaktivieren oder Aktivieren von vorinstallierten Zertifizierungsstellenzertifikaten Klicken Sie rechts neben dem vorinstallierten Zertifizierungsstellenzertifikat, das Sie deaktivieren wollen, auf [Deaktivieren]. Klicken Sie rechts neben dem Zertifikat auf [Aktivieren], um das Zertifikat wieder zu aktivieren. 5 Klicken Sie auf [Installieren...].
LINKS Generieren von Schlüsselpaaren Verifizieren von Schlüsselpaaren und digitalen Zertifikaten Aktivieren der Kommunikation mit SSL-Verschlüsselung für Remote UI Konfigurieren von IPSec-Einstellungen Konfigurieren der IEEE 802.
0CC5-0A8 Verifizieren von Schlüsselpaaren und digitalen Zertifikaten Nachdem Sie Schlüsselpaare und Zertifizierungsstellenzertifikate registriert haben, können Sie detaillierte Informationen dazu anzeigen oder ihre Gültigkeit und Signatur verifizieren. 1 2 3 4 Starten Sie Remote UI, und melden Sie sich im Systemmanager-Modus an. Klicken Sie auf [Einstellungen/Speicherung].
Das Ergebnis beim Verifizieren des Zertifikats wird wie unten abgebildet angezeigt.
0CC5-0A9 Verwenden von Remote UI Wenn Sie das Gerät über einen Webbrowser remote bedienen, können Sie die zu druckenden Dokumente oder den Status des Geräts überprüfen. Sie können auch einige Einstellungen vornehmen, wie die Registrierung des Adressbuchs. Das ist möglich, ohne dass Sie Ihren Schreibtisch verlassen, was die Systemverwaltung einfacher macht.
0CC5-0AA Starten von Remote UI Für die Remotebedienung müssen Sie die IP-Adresse des Geräts in einen Webbrowser eingeben und Remote UI starten. Überprüfen Sie im Vorfeld die beim Gerät eingestellte IP-Adresse ( Anzeigen von Netzwerkeinstellungen). Wenn Sie Fragen haben, wenden Sie sich an Ihren Netzwerkadministrator. 1 2 Starten Sie den Webbrowser. Geben Sie in das Adressfeld "http://(IP-Adresse des Geräts)/" ein, und drücken Sie die Taste [EINGABE].
㻠㻢㻜㻌㻛㻌㻢㻤㻝
0CC5-0AC Remote UI-Bildschirme In diesem Abschnitt werden die Hauptbildschirme von Remote UI beschrieben. Portalseite (Hauptseite) Seite [Status Monitor/Abbruch] Seite [Einstellungen/Speicherung] Seite [Adressbuch] (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Portalseite (Hauptseite) [Logout] Damit melden Sie sich bei Remote UI ab. Die Login-Seite wird angezeigt.
Seite [Status Monitor/Abbruch] [An Portal] Die Portalseite (Hauptseite) wird wieder angezeigt. Menü Wenn Sie auf eine Option klicken, wird der Inhalt auf der rechten Seite angezeigt. des Gerätestatus Verwalten von Dokumenten und Anzeigen Brotkrümel (Breadcrumbs) Zeigt die Seiten an, die Sie bisher geöffnet haben, um zu der zurzeit angezeigten Seite zu gelangen. Sie können prüfen, welche Seite gerade angezeigt wird. Aktualisierungssymbol Aktualisiert die zurzeit angezeigte Seite.
HINWEIS Systemverwaltungseinstellungen [Einstellungen Systemverwaltung] können Sie nur festlegen, wenn Sie im Systemmanager-Modus angemeldet sind. Wenn Sie im Endanwender-Modus angemeldet sind, wird nur [Systemverwaltung] angezeigt. Seite [Adressbuch] (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) [An Portal] Die Portalseite (Hauptseite) erscheint. [Favoriten] Zeigt die Favoritenliste an.
0CC5-0AE Verwalten von Dokumenten und Anzeigen des Gerätestatus Anzeigen des aktuellen Status von Druckdokumenten Überprüfen von Statistiken zu Dokumenten Überprüfen von Fehlerinformationen Anzeigen von technischen Daten des Geräts Anzeigen der Systemmanager-Informationen Anzeigen des Zählers für die Druckfunktion HINWEIS Der Dokumentdateiname wird nur mit 32 Zeichen angezeigt. Möglicherweise wird der Anwendungsname zum Dateinamen hinzugefügt.
Überprüfen von Fehlerinformationen Wenn ein Fehler auftritt, können Sie diese Seite aufrufen, indem Sie auf der Portalseite (Hauptseite) auf die Meldung unter [Fehlerinformationen] klicken. Portalseite (Hauptseite) Melden Sie sich bei Remote UI an ( Starten von Remote UI) [Status Monitor/Abbruch] [Fehlerinformationen] Anzeigen von technischen Daten des Geräts Die maximale Druckgeschwindigkeit und die Speicherkapazität für den geschützten Druck werden angezeigt.
Melden Sie sich bei Remote UI an ( Starten von Remote UI) [Status Monitor/Abbruch] [Geräteinformationen] Anzeigen des Zählers für die Druckfunktion Die Gesamtzahl der mit der Druck-, Kopier- und Faxfunktion gedruckten Seiten wird angezeigt.
0CC5-0AK Einstellen von Menüoptionen über Remote UI Über Remote UI können Sie die verschiedenen Einstellungen für das Gerät ändern. Die meisten Einstellungen können auch am Gerät selbst festgelegt werden, aber manche Einstellungen stehen nur in Remote UI zur Verfügung. HINWEIS Sie können die Einstellungen unter [Einstellungen Systemverwaltung] nur ändern, wenn Sie im Systemmanager-Modus angemeldet sind. 1 2 3 Starten Sie Remote UI. Starten von Remote UI Klicken Sie auf [Einstellungen/Speicherung].
Druckereinstellungen Druckereinstellungen Berichtseinstellungen Drucken von Berichten und Listen Systemverwaltungseinstellungen Systemverwaltung Einstellungen Systemverwaltung Verwaltung Abteilungs-ID Einstellen der Verwaltung per Abteilungs-IDs Netzwerkeinstellungen Netzwerk Sicherheitseinstellungen Sicherheit Einstellungen Kommunikationsverwaltung/Weiterleitungseinstellungen Einstellungen Systemverwaltung Importieren/Exportieren Speichern/Laden gespeicherter Daten Einstellungsinformationen
0CC5-0AF Speichern/Laden gespeicherter Daten Im Gerät gespeicherte Adressbuchdaten oder Menüoptionen können Sie auf einem Computer speichern (exportieren). Außerdem können Sie auf dem Computer gespeicherte Daten auf das Gerät übertragen (importieren). Sie können die Empfänger im Adressbuch ganz einfach auf mehrere Geräte kopieren. * Diese Funktionen können Sie verwenden, wenn Sie im Systemmanager-Modus angemeldet sind.
0CC5-0AH Speichern/Laden von Adressbuchdaten (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Sie können registrierte Adressbuchdaten auf dem Computer speichern oder gespeicherte Adressbuchdaten beim Gerät registrieren. Andere Geräte können die Registrierungsinhalte importieren, die von diesem Gerät exportiert wurden und umgekehrt * . * Abhängig vom Modell ist diese Möglichkeit nicht verfügbar.
5 Geben Sie den Speicherort des exportierten Adressbuchs nach den Bildschirmanweisungen an. Das Adressbuch wird gespeichert. WICHTIG Bedienen Sie das Gerät nicht, bis der Vorgang abgeschlossen ist. Der Bildschirm bleibt während des Exportvorgangs unverändert. Verwenden Sie Remote UI erst wieder, wenn die Meldung [Der Download von (Dateiname) wurde abgeschlossen.] unten am Bildschirm angezeigt wird.
Wenn ein Bildschirm erscheint, in dem Sie zur Eingabe der PIN für das Adressbuch aufgefordert werden, geben Sie die [PIN] ein, Festlegen einer PIN für das Adressbuch und klicken Sie auf [OK]. 4 Klicken Sie auf [Import]. 5 Wählen Sie die zu importierende Adressbuchdatei, und klicken Sie auf [Importstart]. Klicken Sie auf [Durchsuchen...], und wählen Sie die Datei, oder geben Sie den Pfad für die Datei (Dateinamen und Speicherort der Datei) in [Dateipfad] ein, um die zu importierende Datei anzugeben.
0CC5-0AJ Speichern/Laden von Einstellungen Sie können die Einstellungsdaten der Menüoptionen auf dem Computer speichern oder die gespeicherten Daten beim Gerät registrieren. Die exportierten Daten können importiert werden. Wenn Sie das gleiche Modell verwenden, können andere Geräte die von diesem Gerät exportierten Daten importieren und umgekehrt. Dieser Vorgang kann nur durchgeführt werden, wenn Sie im Systemmanager-Modus angemeldet sind.
3 Klicken Sie auf [Import/Export] 4 Klicken Sie auf [Exportstart]. 5 Geben Sie den Speicherort der exportierten Einstellungen nach den Bildschirmanweisungen an. [Menü]. Die Einstellungen werden gespeichert. WICHTIG Bedienen Sie das Gerät nicht, bis der Vorgang abgeschlossen ist. Der Bildschirm bleibt während des Exportvorgangs unverändert. Verwenden Sie Remote UI erst wieder, wenn die Meldung [Der Download von (Dateiname) wurde abgeschlossen.] unten am Bildschirm angezeigt wird.
3 Klicken Sie auf [Import/Export] 4 Klicken Sie auf [Import]. 5 Wählen Sie die zu importierende Datei mit Einstellungen, und klicken Sie auf [Importstart]. [Menü]. Klicken Sie auf [Durchsuchen...], und wählen Sie die Datei, oder geben Sie den Pfad für die Datei (Dateinamen und Speicherort der Datei) in [Dateipfad] ein, um die zu importierende Datei anzugeben. 6 Klicken Sie auf [OK]. Die angegebenen Einstellungen werden in das Gerät importiert. 7 Starten Sie das Gerät neu.
Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder ein.
0CC5-0AL Speichern des Adressbuchs über Remote UI (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Über den Computer können Sie das Adressbuch des Geräts speichern oder bearbeiten. HINWEIS Sie können die Einstellungen nur ändern, wenn Sie im Systemmanager-Modus angemeldet sind. 1 2 Starten Sie Remote UI. Starten von Remote UI Klicken Sie auf [Adressbuch]. HINWEIS: Wenn der Bildschirm zur Eingabe der PIN angezeigt wird Das Adressbuch ist durch eine PIN geschützt.
Wenn Sie einen gespeicherten Eintrag bearbeiten möchten, klicken Sie auf den entsprechenden Textlink unter [Nummer], [Typ] oder [Name]. Wenn Sie einen gespeicherten Eintrag löschen möchten, klicken Sie auf die entsprechende Schaltfläche [Löschen]. 5 Wählen Sie [Empfängertyp für die Speicherung], und klicken Sie auf [OK]. 6 Legen Sie die nötigen Einstellungen fest, und klicken Sie auf [OK].
0CC5-0AR Liste der Menüeinstellungen Bei diesem Gerät gibt es verschiedene Einstellungen. Sie können jede der Einstellungen ausführlich anpassen. Rufen Sie die Einstellungen drücken.
0CC5-0AS Netzwerkeinstellungen Zu allen Einstellungen zum Netzwerk ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF8580Cdw / MF8280Cw zur Verfügung. Mit "*2" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8540Cdn zur Verfügung.
Verbindung durch Auswahl eines Wireless LAN-Routers Manuell eingeben Wählen Sie diese Einstellung, wenn Sie zur Konfiguration der Wireless LAN-Verbindung manuell eine SSID eingeben möchten. Bei Konfiguration der dieser Methode können Sie detaillierte Authentisierungs- und Verschlüsselungseinstellungen angeben.
Manuell erfassen IP-Adresse: 0.0.0.0 Subnetmaske: 0.0.0.0 Gateway-Adresse: 0.0.0.0 Einstellungen prüfen Auto erfassen IP-Adresse Subnetmaske Gateway-Adresse PING Kommando Prüft, ob das Gerät über ein Netzwerk mit einem Computer verbunden ist. Testen der Netzwerkverbindung Einstellungen DNS Legen Sie die Einstellungen für DNS (Domain Name System) fest, womit ein Hostname für die IP-Adressauflösung bereitgestellt Konfigurieren von DNS wird. Einstellungen DNS Server Primärer DNS Server: 0.0.0.
Ein Einstellungen prüfen Zustandshafte Adresse Präfixlänge Einstellungen DNS Legen Sie die Einstellungen für DNS (Domain Name System) fest, womit ein Hostname für die IP-Adressauflösung bereitgestellt Konfigurieren von DNS wird. Einstellungen DNS Hostname/Domänname IPv4 Host/Domäne verwenden Aus Hostname Domänname Ein Einstellungen DNS Dynamisches Update Aus Ein Manuelle Adresse registrieren Aus Ein Zustandshafte Adr. registrieren Aus Ein Zustandslose Adr.
Aktivieren oder deaktivieren Sie die automatische Suche und das Abrufen von Informationen vom Drucker oder Scanner über das Konfigurieren von Druckprotokollen und WSD-Protokoll, das unter Windows Vista/7/8/Server 2008/Server 2012 verfügbar ist.
Einstellungen SNMPv1 Aktivieren oder deaktivieren Sie SNMPv1. Wenn Sie SNMPv1 aktivieren, legen Sie einen Communitynamen und Zugriffsberechtigungen für Management Information Base (MIB)-Objekte fest. Aus Ein Wählen Sie oder Starten Sie das Gerät neu Einstellungen SNMPv3 Aktivieren oder deaktivieren Sie SNMPv3. Legen Sie die detaillierten Einstellungen, die bei aktiviertem SNMPv3 zur Verfügung stehen, mit Remote UI fest.
Starten Sie das Gerät neu Wartezeit für Verbindung bei Startup Legen Sie eine Wartezeit für die Netzwerkverbindung fest. Wählen Sie die Einstellung je nach Netzwerkumgebung. Wartezeit für die Netzwerkverbindung Einstellen einer 0 bis 300 (Sek.) Einstellungen Ethernettreiber Wählen Sie den Ethernet-Kommunikationsmodus (Halb- oder Vollduplex) und den Ethernettyp (10BASE-T/100BASE-TX). Sie können auch die MAC-Adresse des Geräts anzeigen.
0CC5-0AU Präferenzen Zu allen Einstellungen zur Tonlautstärke und zum Display ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8280Cw zur Verfügung. Mit "*2" markierte Einstellungen haben je nach dem Land oder der Region, wo das Gerät gekauft wurde, andere Standardwerte.
Drei Stufen Nur bei Fehler Drei Stufen Scan-fertig-Ton *1 Legen Sie fest, ob nach dem Scannen von Faxdokumenten ein Signalton zu hören sein soll. Sie können auch die Lautstärke einstellen. Aus Ein Drei Stufen Nur bei Fehler Drei Stufen Eingabeton Legen Sie fest, ob beim Drücken von Tasten auf dem Bedienfeld ein Signalton zu hören sein soll.
Standardanzeige nach Start/Wiederherstellung Standardmäßig erscheint direkt nach dem Einschalten des Geräts oder nach der automatischen Rückstellung der Hauptkopierbildschirm. Ändern Sie die Einstellung, wenn Sie einen anderen Standardbildschirm verwenden möchten und der Hauptbildschirm einer anderen Funktion angezeigt werden soll.
Zeit Nachrichtenanzeige Legen Sie das Intervall fest, in dem zwei verschiedene Meldungen abwechselnd angezeigt werden. 1 bis 2 bis 5 (Sek.) eine Zahl für das Intervall ein Geben Sie Scrollgeschwindigkeit Stellen Sie die Geschwindigkeit des Bildlaufs auf eine von drei Stufen ein.
Sprache Remote UI *2 Wählen Sie die Anzeigesprache, die für Remote UI-Bildschirme verwendet wird.
0CC5-0AW Timereinstellungen Zu allen Einstellungen zum Timer ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen können nicht über Remote UI importiert oder exportiert werden. Mit "*2" markierte Einstellungen stehen je nach dem Land oder der Region, wo das Gerät gekauft wurde, eventuell nicht zur Verfügung oder haben andere Standardwerte.
Einstellungen aktuelle/s Datum/Zeit *1 Stellen Sie das Datum und die Uhrzeit ein. Mit Uhrzeit ein und wählen /. / verschieben Sie den Cursor, und mit / geben Sie das Datum und die WICHTIG Stellen Sie ein, bevor Sie das Datum und die Uhrzeit einstellen. Wenn Sie die Einstellung für ändern, ändern sich Datum und Uhrzeit entsprechend.
Ein Start: Monat, Woche, Tag Ende: Monat, Woche, Tag Wählen Sie den Monat und den Tag Zeit bis zur automatischen Rückstellung Wenn eine bestimmte Zeit lang keine Taste gedrückt wird, werden der Bildschirm und die Einstellungen auf den Standardbildschirm zurückgesetzt (automatische Rückstellung). Legen Sie das Intervall für die automatische Rückstellung fest.
Zeit bis zum automatischen Schlafmodus Wenn das Gerät eine bestimmte Zeit lang nicht bedient wurde oder keine zu verarbeitenden Daten vorlagen, wechselt das Gerät in den Schlafmodus, um den Stromverbrauch zu reduzieren (automatischer Schlafmodus). Legen Sie die Zeit fest, nach der das Gerät automatisch in den Schlafmodus wechselt. Das Gerät wechselt nicht automatisch in den Schlafmodus, wenn das Einstellmenü angezeigt Wechseln in wird.
0CC5-0AX Allgemeine Einstellungen Zu allen Einstellungen zur Bedienung der Papierkassette und des Papiereinzugsverfahrens ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Mit "*2" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8280Cw zur Verfügung.
Wählen Sie die Papierquelle Wählen Sie oder die Funktion Wählen Sie Funktionen Wählen Sie die Funktion, für die Sie die automatische Papierkassettenauswahl konfigurieren möchten. HINWEIS: Wählen Sie für Funktionen wie das Drucken von Berichten und Listen sowie das Drucken von Bildern von einem USB-Speichergerät. Papierquellen Wählen Sie die Papierquelle, für die Sie die Funktion aktivieren möchten.
Papierquellen Wählen Sie die Papierquelle, für die Sie die Einstellung ändern möchten. Wenn Sie Papier verwenden, das mit einem Logo bedruckt wurde, müssen Sie die Ausrichtung ändern, wenn Sie 1und 2-seitiges Drucken ausführen. HINWEIS: Es empfiehlt sich, zu wählen, wenn Sie sich über die zu bedruckende Seite keine Gedanken machen möchten.
0CC5-0AY Kopiereinstellungen Zu allen Einstellungen zum Kopieren ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8540Cdn zur Verfügung. Mit "*2" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Standardeinstellungen ändern Sie können die werkseitigen Standardeinstellungen zum Kopieren ändern.
Gelb: 17 Stufen Magenta: 17 Stufen Cyan: 17 Stufen Schwarz: 17 Stufen 㻡㻜㻜㻌㻛㻌㻢㻤㻝
0CC5-0C0 Faxeinstellungen (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Zu allen Einstellungen zum Faxen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen je nach dem Land, in dem Sie das Gerät verwenden, eventuell nicht zur Verfügung, variieren oder haben einen anderen Standardwert. Mit "*2" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8540Cdn zur Verfügung.
SE Funktionseinstellungen Legen Sie die Einstellungen für das Senden von Faxen fest. Standardeinstellungen ändern Legen Sie die beim Senden von Faxen verwendeten Einstellungen fest. Die ausgewählten Einstellungen werden als Ändern von Standardeinstellungen Standardeinstellungen für das Scannen von Dokumenten verwendet.
Sie die Dauer der Pause fest Legen Auto Wahlwiederholung *1 Legen Sie die Einstellungen für die automatische Wahlwiederholung fest. Bei dieser Funktion wird eine Faxnummer, die beim ersten Wählversuch aufgrund einer besetzten Leitung nicht erreicht wurde, nach mehreren Minuten automatisch erneut gewählt. Sie können die Anzahl an Wahlwiederholungen und das Intervall zwischen den Wahlwiederholungen festlegen.
Legt die Position fest, an der die Kopfzeile im gesendeten Fax gedruckt wird. Wählen Sie , wenn die Informationen im Bildbereich gedruckt werden sollen, oder , um die Informationen außerhalb des Bildbereichs zu drucken. Fügt die Markierung "FAX" oder "TEL" vor der im Gerät gespeicherten Faxnummer ein ( Speichern der Faxnummer und des Gerätenamens).
Eingehende Anrufe *1 Legen Sie die Einstellungen für ein Klingelzeichen zur Benachrichtigung bei eingehenden Faxen fest. Diese Funktion steht nur zur Verfügung, wenn Sie als Empfangsmodus oder gewählt haben. Legen Sie fest, wie oft das Klingelzeichen zu hören sein soll, wenn das Gerät einen Faxanruf empfängt. Sie können die Einstellungen auch deaktivieren, sodass bei eingehenden Anrufen kein Klingelzeichen zu hören ist.
Einstellungen EM Druck Legen Sie die Einstellungen für das Drucken von empfangenen Faxen fest. Doppelseitig drucken *2 Legen Sie die Einstellungen für das Drucken von empfangenen Faxen auf beiden Seiten des Papiers fest. Aus Ein EM-Format reduzieren Legen Sie die Einstellungen für die Verkleinerung des Bildformats eines empfangenen Dokuments fest.
Aus Ein Weiterdrucken, wenn Toner niedrig ist Wenn Sie Faxe empfangen und der Toner fast leer ist, speichert das Gerät sie im Speicher, statt sie auszudrucken. Wenn diese Funktion aktiviert ist, setzt das Gerät aber den Druck fort. Aus Ein WICHTIG Wenn Sie diese Funktion aktivieren, sind die Faxe möglicherweise blass oder verschwommen.
0CC5-0C1 Scaneinstellungen Zu allen Einstellungen zum Scannen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8540Cdn zur Verfügung. Mit "*2" markierte Einstellungen können nicht über Remote UI importiert oder exportiert werden.
Nachricht Antwort an Ohne Aus dem Adressbuch angeben Vorrang Niedrig Standard Hoch Windows (SMB) Scanformat A4 A5 Dateiformat PDF (Kompakt) PDF JPEG TIFF Dichte Neun Stufen Ausrichtung Original Hochformat Querformat Originaltyp Text Text/Foto Foto Doppelseitiges Original Aus Buchtyp Kalendertyp Schärfe Sieben Stufen Datengröße Klein: Vorrang Speicher Standard Groß: Vorrang Bildqualität Name der Einheit speichern (E-Mail) Speichern Sie den Absendernamen für E-Mails.
PDF (Kompakt) PDF JPEG TIFF Dichte Neun Stufen Ausrichtung Original Hochformat Querformat Originaltyp Text Text/Foto Foto Doppelseitiges Original*1 Aus Buchtyp Kalendertyp Schärfe Sieben Stufen Datengröße Klein: Vorrang Speicher Standard Groß: Vorrang Bildqualität Einstellungen Bild Ausgabedatei Legen Sie Einstellungen wie den Gammawert und den Dateikomprimierungsfaktor für das Konvertieren gescannter Dokumente in Dateien fest.
Aus USB-Verbindung Farbscan SW Scan Anwenderdefiniert Anwenderdefiniert Netzwerkverbindung Farbscan SW Scan Anwenderdefiniert Anwenderdefiniert Scan -> PC2 Aus USB-Verbindung Farbscan SW Scan Anwenderdefiniert Anwenderdefiniert Netzwerkverbindung Farbscan SW Scan Anwenderdefiniert Anwenderdefiniert 1 2 1 2 1 2 1 2 Empfänger bestätigen Scan -> PC1 Scan -> PC2 㻡㻝㻝㻌㻛㻌㻢㻤㻝
0CC5-0C2 Einstellungen Speichermedium Druck Zu allen Einstellungen zum Speichermediendruck ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist. Mit "*2" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8540Cdn zur Verfügung.
Details Bilder oder Wählen Sie Zeigt Dateinamen und Datumsangaben in Form einer Liste an. Zeigt Miniaturbilder als Vorschau an. Standardeinstellungen Dateisortierung Legen Sie fest, ob Dateien auf einem USB-Speichergerät in auf- oder absteigender Reihenfolge nach Dateiname oder Datum sortiert angezeigt werden sollen.
Bei dieser Option wird ein Dateiname auf bis zu acht Zeichen verkürzt. Um die Dateien mit ähnlichem Namen zu unterscheiden, werden Zahlen wie "~ 1" oder "~ 2" an das Ende des Dateinamens angehängt. Zeigt bis zu 20 Zeichen für die Dateinamen an. HINWEIS Bei der oben genannten Anzahl an Zeichen sind die Zeichen für die Dateierweiterung wie ".jpg" nicht inbegriffen.
0CC5-0C3 Druckereinstellungen Zu allen Einstellungen zum Drucker ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit einem Stern (* ) markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8540Cdn zur Verfügung. Priorität der Einstellungen Die in einer Anwendung oder im Druckertreiber vorgenommenen Einstellungen haben Vorrang vor den am Gerät vorgenommenen Einstellungen.
Ein Wählen Sie oder Standardpapier * Wählen Sie die Standardeinstellung für Format und Typ des zu bedruckenden Papiers. HINWEIS und können nicht separat festgelegt werden. Geben Sie das Papierformat auf dem Bildschirm und dann den Papiertyp auf dem Bildschirm an.
Papierformat nicht berücksichtigen Legen Sie fest, ob beim Drucken zwischen Papier des Formats A4 und LTR gewechselt werden soll, wenn nur Papier eines Formats Konfigurieren von Druckereinstellungen am Gerät eingelegt ist. Aus Ein Druckqualität * Legen Sie die Druckqualität wie die Tonerdichte und die Bilddatenverarbeitungsmethoden fest. Dichte Legen Sie die Druckdichte für jede Tonerfarbe fest. Je höher der Wert, desto höher die Dichte.
Schwarz Hoch 17 Stufen Mittel 17 Stufen Niedrig 17 Stufen HINWEIS Die für festgelegten Einstellungen werden deaktiviert, wenn Sie aktivieren. Wählen Sie die Tonerfarbe Wählen Sie , oder Legen Sie die Drücken Sie so oft, bis angezeigt wird.
Wählen Sie einen Glättungsmodus, wenn Sie Dokumente mit fließenden Übergängen drucken möchten. Wenn die Ergebnisse beim Drucken mit der Standardeinstellung nicht zufriedenstellend sind, probieren Sie eine der anderen Einstellungen aus. Modus Modus Modus Modus Modus Modus 1 2 3 4 5 6 den Glättungsmodus Wählen Sie Glättet die Kanten von Text, Linien und Grafiken in dunklen Farben.
Layout * Legen Sie die Einstellungen für das Seitenlayout wie die Bindungsposition und die Ränder fest. Bindungsort Wählen Sie die Bindungsposition des Papiers (lange oder kurze Kante). Beim doppelseitigen Druck wird die Bildausrichtung dargestellt. automatisch an das richtige Layout angepasst.
Versatz kurze Kante (Vorne) Legen Sie die Druckposition durch Angabe des Versatzwerts für die kurze Kante an der Vorderseite des Papiers fest. Bei einem höheren Wert verschiebt sich die Druckposition nach rechts. Bei einem niedrigeren Wert verschiebt sich die Druckposition nach links.
WICHTIG Wenn sich ein Teil der Druckdaten außerhalb des bedruckbaren Bereichs befindet, nachdem Sie diese Einstellung vorgenommen haben, werden die Teile außerhalb des bedruckbaren Bereichs nicht gedruckt. den Versatzwert fest Legen Sie Versatz lange Kante (Hinten) Legen Sie die Druckposition durch Angabe des Versatzwerts für die lange Kante an der Rückseite des Papiers fest.
Timeout * Legen Sie die Zeit fest, nach der das Gerät unvollständige Druckdaten aus dem Speicher löscht. Das Gerät löscht unvollständige Druckdaten, da diese eventuell Fehler enthalten und unter Umständen das Drucken des nächsten Dokuments verhindern. 5 bis 15 bis 300 (Sek.) HINWEIS Wählen Sie einen ausreichend langen Zeitraum, damit das Gerät alle Druckdaten vom Computer empfangen kann, insbesondere beim Drucken großer Datenmengen.
Legen Sie die Gradationseinstellungen fest Ausgabe komprimiertes Bild * Legen Sie fest, was mit Druckdaten geschehen soll, für die die Speicherkapazität des Geräts nicht ausreicht. Sie können die Daten in niedrigerer Bildqualität drucken () oder das Drucken abbrechen und eine Fehlermeldung anzeigen lassen ().
Fontnummer Legen Sie die gewünschte Schriftart fest, indem Sie eine ID-Nummer zwischen 0 und 54 auswählen. Über das Bedienfeld können Sie Fontliste PCL (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) die PCL-Schriftartenliste mit Beispielen für Schriftarten drucken. 0 bis 54 Schriftartennummer Wählen Sie die Punktgröße Legen Sie die Schriftgröße in Schritten von 0,25 Punkten fest.
Zeichencode Wählen Sie den Zeichencode, der für den Computer, von dem Sie Druckdaten senden, am besten geeignet ist. Die Einstellung wird ignoriert, wenn der Zeichencode durch die in festgelegte Schriftart vorgegeben wird.
Legen Sie die Breite (kurze Kante) des anwenderdefinierten Papierformats fest. 77 bis 215 (mm) Legen Sie den Wert fest Y-Ausrichtung Legen Sie die Länge (lange Kante) des anwenderdefinierten Papierformats fest.
oder Wählen Sie Halbtöne Legen Sie die Datenverarbeitungsmethode zum Reproduzieren von Halbtönen fest. Sie können angeben, ob verwendet wird, und außerdem oder für Text, Grafiken und Bilder getrennt auswählen.
Bild sRGB Gamma 1.5 Gamma 1.8 Gamma 2.4 HINWEIS Diese Einstellung steht nur zur Verfügung, wenn Sie für die Einstellung wählen. oder Wählen Sie das Quellprofil Wählen Sie , Ausgabeprofil Wählen Sie das Ausgabeprofil für den Farbabgleich.
HINWEIS Diese Einstellung steht nur zur Verfügung, wenn Sie für die Einstellung wählen. oder Wählen Sie die Abgleichmethode Wählen Sie , Nimmt einen für das Drucken fotografischer Bilder geeigneten Farbabgleich vor, wenn Sie außerdem für die Einstellung gewählt haben.
Graudaten (Schwarzweiß) werden mit allen Tonerfarben (Gelb , Magenta, Cyan und Schwarz) gedruckt. Im Vergleich mit lassen sich Abstufungen in dunklen Bereichen besser reproduzieren. Graudaten (Schwarzweiß) werden nur mit schwarzem Toner gedruckt, was das Verlaufen des Toners reduziert. Auswahl CMS (Abgleich) Sie können den Farbabgleich am Gerät oder am Computer (Druckertreiber) durchführen lassen.
Grafiken 1,0 1,4 1,8 2,2 Bild 1,0 1,4 1,8 2,2 HINWEIS Diese Einstellung steht nur zur Verfügung, wenn Sie für die Einstellung wählen. oder Legen Sie den Gammawert fest Wählen Sie , Erweiterte Glättung Legen Sie fest, wie gezackte Konturen bei Text und Grafiken geglättet werden. Mit erzielen Sie einen stärkeren Glättungseffekt als mit .
0CC5-0C4 Justage/Wartung Zu allen Einstellungen zur Justage und zur Wartung ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit (* ) markierte Einstellungen stehen nur zur Verfügung, wenn die optionale Papierkassette (Kassette 2) eingesetzt ist.
Legen Sie fest, ob die Funktion "Druck Farbabgleich korrigieren" automatisch nach dem Einschalten des Geräts ausgeführt werden soll. Sie können diese Korrektur auch manuell ausführen ( Korrektur von Druck-Farbverzerrungen). Aus Ein Wählen Sie oder korr., wenn Hauptstrom EINgesch. ist>
Einstellungen raues Papier Wählen Sie , wenn Sie auf rauem Papier drucken, insbesondere wenn Farbbilder im Ausdruck zu hell sind. Sie können die Einstellung für jede Papierquelle getrennt festlegen.
Wählen Sie oder Briefumschläge werden mit normaler Fixierleistung bedruckt. Briefumschläge werden mit höherer Fixierleistung als bei bedruckt. Spezialmodus P Wählen Sie , wenn sich das bedruckte Papier aufrollt.
0CC5-0C5 Einstellungen Systemverwaltung Zu allen Einstellungen zu den Systemverwaltungseinstellungen ist eine kurze Erläuterung angegeben. Die Standardeinstellungen sind mit einem Kreuz ( ) markiert. HINWEIS Sterne (* ) Mit "*1" markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8280Cw zur Verfügung. Mit "*2" markierte Einstellungen haben je nach dem Land oder der Region, wo das Gerät gekauft wurde, andere Standardwerte.
Name Systemmanager Geben Sie bis zu 32 alphanumerische Zeichen für den Namen eines Administrators ein. Einstellungen Geräteinformation Geben Sie bis zu 32 alphanumerische Zeichen für den Namen und den Aufstellort des Geräts ein.
Wählen Sie oder Starten Sie das Gerät neu IPSec verwenden Legen Sie fest, ob für die verschlüsselte Kommunikation ein VPN (Virtuelles Privates Netzwerk) über IPSec genutzt werden soll.
MAC-Adressfilter Aktivieren oder deaktivieren Sie Einstellungen für die Filterung von Paketen, die an Geräte mit bestimmten MAC-Adressen gesendet Angeben von MAC-Adressen für Firewallregeln bzw. von diesen empfangen werden.
Wählen Sie Wählen Sie die Startgeschwindigkeit für die Kommunikation Einstellung R-Taste Wenn das Gerät an eine Nebenstellenanlage angeschlossen ist, müssen Sie das Verfahren der Amtsholung einstellen. Sie können als Nebenstellentyp oder festlegen. Wenn Sie die Amtsvorwahl auf der R-Taste speichern, brauchen Sie nur die Taste zu drücken, um ein Freizeichen zu erhalten.
Belgien (BE) Tschechische Republik (CZ) Dänemark (DK) Ägypten (EG) Finnland (FI) Frankreich (FR) Deutschland (DE) Griechenland (GR) Ungarn (HU) Irland (IE) Italien (IT) Jordanien (JO) Luxemburg (LU) eine Region Polen (PL) Portugal (PT) Russland (RU) Saudi-Arabien (SA) Slowenien (SI) Südafrika (ZA) Spanien (ES) Schweden (SE) Schweiz (CH) Ukraine (UA) Großbritannien (GB) Andere Wählen Sie ein Land oder Weiterleitungseinstellungen *1 *3 Legen Sie fest,
SE-Funktion beschränken *4 Legen Sie Einstellungen zum Einschränken des Zugriffs auf Sendefunktionen für ausgewählte Empfänger fest. Adressbuch PIN Legen Sie eine PIN fest, die beim Hinzufügen neuer oder beim Bearbeiten vorhandener Adressbucheinträge eingegeben werden muss.
Legen Sie fest, ob die Kopier-, Druck-, Fax- und Scanlogs im Display des Geräts und im Kommunikationsverwaltungsbericht erscheinen sollen. Aus Ein Starten Sie das Gerät neu Wählen Sie oder USB-Gerät Ein/Aus Aktivieren oder deaktivieren Sie den USB-Anschluss, über den das Gerät an einen Computer angeschlossen werden kann.
Cloud Druck Ein/Aus Aktivieren oder deaktivieren Sie Google Cloud Print. Vorbereitungen für Google Cloud Print Aus Ein Einstellungen Geschützter Druck *5 Aktivieren oder deaktivieren Sie den geschützten Druck. Drucken mit der Funktion für geschützten Druck Aus Ein Löschzeitpkt. Geschützter Druck 10 bis 30 bis 240 (Min.
Das Gerät wird als ein mit XPS (XML Paper Specification) kompatibler UFRII LT-Drucker erkannt, und eine entsprechende Verbindung wird hergestellt. Das Gerät wird als PCL5-Drucker erkannt, und eine entsprechende Verbindung wird hergestellt. Das Gerät wird als PCL6-Drucker erkannt, und eine entsprechende Verbindung wird hergestellt. Firmware aktualisieren *3 Wählen Sie, wie das Firmwareupdate je nach Geräteumgebung installiert werden soll.
0CC5-0C6 Menü initialisieren Wählen Sie diese Funktion, wenn die unten aufgeführten Einstellungen auf die werkseitigen Standardwerte zurückgesetzt werden sollen. Sie können alle unten aufgeführten Einstellungen gleichzeitig oder einzelne dieser Initialisieren des Menüs Einstellungen getrennt zurücksetzen. HINWEIS Sterne (* ) Mit einem Stern (* ) markierte Einstellungen stehen nur beim MF8580Cdw / MF8550Cdn / MF8280Cw zur Verfügung.
0CC5-0C7 Fehlerbehebung Schlagen Sie in diesem Kapitel nach, wenn ein Problem auftritt, um möglicherweise eine Lösung zu finden, bevor Sie sich mit Canon in Kontakt setzen. Papierstau Bei einem Dokumenten- oder Papierstau lesen Sie bitte unter gestaute Papier entfernen.
0CC5-0C8 Beheben von Dokumenten- und Papierstaus Wenn es zu einem Papierstau kommt, wird auf dem Bildschirm angezeigt. Drücken Sie , um einfache Lösungen anzuzeigen. Wenn die Schritte im Display schwer zu verstehen sind, schlagen Sie unter den folgenden Abschnitten nach, um den Papierstau zu beheben. MF8580Cdw / MF8550Cdn / MF8540Cdn Dokumentenstau in der Zufuhr (MF8580Cdw / MF8550Cdn / MF8540Cdn)
1 2 3 Nehmen Sie das gestaute Dokument aus der Abdeckung der Zufuhr. 1 Öffnen Sie die Abdeckung der Zufuhr. 2 Verschieben Sie zum Entriegeln den Hebel. 3 Ziehen Sie das Dokument behutsam heraus. Nehmen Sie das gestaute Dokument unter der internen Abdeckung in der Zufuhr heraus. 1 Halten Sie den grünen Knopf gedrückt, und öffnen Sie die interne Abdeckung. 2 Ziehen Sie das Dokument behutsam heraus. 3 Schließen Sie die interne Abdeckung.
1 Öffnen Sie die vordere Abdeckung. 2 Heben Sie das Bedienfeld an. 3 Ziehen Sie das Papier behutsam heraus. 4 Senken Sie das Bedienfeld, und schließen Sie die vordere Abdeckung. Papierstau in der manuellen Zufuhr (MF8580Cdw / MF8550Cdn / MF8540Cdn) Wenn Papier in die Kassette eingelegt ist, entfernen Sie es zuerst. Entfernen Sie gestautes Papier nicht gewaltsam aus dem Gerät. Wenn gestautes Papier nicht einfach entfernt werden kann, fahren Sie mit dem nächsten Schritt fort.
WICHTIG: Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Halten Sie die grünen Knöpfe, und drücken Sie das in der Abbildung gezeigte Teil nach unten. 3 Ziehen Sie das Papier behutsam heraus. WICHTIG: Berühren Sie nicht die Gummiauflage Andernfalls kann die Druckqualität beeinträchtigt werden.
WICHTIG: Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Ziehen Sie das Papier behutsam heraus. Wenn die optionale Papierkassette (Kassette 2) angebracht ist, ziehen Sie das Papier vorsichtig auf die gleiche Art heraus. 3 4 Setzen Sie die Papierkassette ein.
4 Halten Sie die grünen Knöpfe, und schließen Sie die Duplexeinheit fest ( 5 Ziehen Sie das Papier behutsam heraus. 6 Schließen Sie die hintere Abdeckung. ), bis sie hörbar einrastet. Dokumentenstau in der Zufuhr (MF8280Cw / MF8230Cn) Wenn Dokumente in die Zufuhr eingelegt wurden, entfernen Sie diese zuerst. Befolgen Sie dann die unten aufgeführten Schritte. 1 Öffnen Sie die Abdeckung der Zufuhr. 2 Ziehen Sie das Dokument behutsam heraus. 3 Schließen Sie die Abdeckung der Zufuhr.
Papierstau an der Vorder- und der Rückseite 1 Heben Sie das Bedienfeld an. 2 Ziehen Sie das Papier behutsam heraus. 3 4 Senken Sie das Bedienfeld. Öffnen Sie die hintere Abdeckung. 5 Ziehen Sie das Papier behutsam heraus. 6 Schließen Sie die hintere Abdeckung. Papierstau in der manuellen Zufuhr (MF8280Cw / MF8230Cn) 1 Ziehen Sie die Papierkassette heraus.
WICHTIG: Halten Sie die Papierkassette unbedingt mit beiden Händen, und ziehen Sie sie vorsichtig heraus. Andernfalls besteht die Gefahr, dass sich die Papierkassette zu leicht herausziehen lässt, fallen gelassen und beschädigt wird. 2 Öffnen Sie die Abdeckung. 3 Halten Sie die grünen Knöpfe, und drücken Sie das in der Abbildung gezeigte Teil nach unten. 4 Ziehen Sie das Papier behutsam heraus.
0CC5-0C9 Wenn eine Fehlermeldung erscheint Wenn Sie kein Fax senden können, der Speicher voll ist oder es zu Problemen beim Bedienen des Geräts kommt, erscheint eine Meldung im Display. Weitere Informationen zu Meldungen finden Sie in der folgenden Liste. Kopieren in Schwarzweiß ist beschränkt. Einloggen? Das Kopieren in Schwarzweiß wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert.
Drucken von EM-Daten nicht möglich. Ein empfangenes Dokument kann aus folgenden Gründen nicht gedruckt werden: Die Tonerpatrone muss bald ausgetauscht werden. Eine Abdeckung ist geöffnet. Es ist keine Tonerpatrone eingesetzt. Es ist kein Papier eingelegt. Es gibt einen Dokumenten- oder Papierstau. Es gibt eine Störung. Überprüfen Sie, ob die oben aufgeführten Probleme auftreten. Wenn Meldungen einschließlich Ursachen und Lösungen im Display angezeigt werden, überprüfen Sie deren Inhalt.
Cloud Drucken kann nicht verw. werden. (Komm.fehler Server.) Cloud Print steht aufgrund eines Fehlers nicht zur Verfügung. Überprüfen Sie, ob das Gerät korrekt mit einem Wireless LAN oder verkabelten LAN verbunden ist. Herstellen einer Wireless LAN-Verbindung (nur MF8580Cdw / MF8280Cw) Herstellen einer Wired LAN-Verbindung Ein für Cloud Print verwendeter Port ist möglicherweise durch eine Firewall oder eine andere Schutzvorrichtung blockiert.
Wählen Sie , und melden Sie sich mit einer Abteilungs-ID an, für die das Drucken in Farbe nicht deaktiviert ist. Informationen zur Abteilungs-ID und PIN erhalten Sie bei Ihrem Administrator. Einstellen der Verwaltung per Abteilungs-IDs Verbindung fehlgeschlagen. PSK-Einstellungen prüfen. Der Netzwerkschlüssel (PSK) eines Wireless LAN-Routers, zu dem eine Verbindung hergestellt werden soll, ist im Gerät nicht richtig konfiguriert.
Die Verbindung ist aufgrund eines Fehlers beim Einstellen der Wireless LAN-Verbindung fehlgeschlagen. Starten Sie das Gerät neu, und stellen Sie die Verbindung erneut ein. Wenn das Problem auch nach dem Neustart des Geräts bestehen bleibt, prüfen Sie, ob das Gerät ordnungsgemäß installiert und für eine Verbindung mit dem Netzwerk bereit ist.
Das Faxen wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert. Wählen Sie , und melden Sie sich mit einer Abteilungs-ID an, für die das Faxen nicht deaktiviert ist. Informationen zur Abteilungs-ID und PIN erhalten Sie bei Ihrem Administrator. Einstellen der Verwaltung per Abteilungs-IDs Kein Papier Es ist kein Papier in die Papierkassette oder die manuelle Zufuhr eingelegt. Legen Sie Papier ein. Einlegen von Papier Es ist kein Papier für das Ausdrucken von Berichten oder Listen eingelegt.
Papier ist gestaut. Es liegt ein Papierstau vor. Entfernen Sie das gestaute Papier oder Dokument, und drucken Sie erneut. (Möglicherweise wird das Drucken auch automatisch fortgesetzt.) Beheben von Dokumenten- und Papierstaus Ein Dokument kann nicht über die manuelle Zufuhr gedruckt werden, da die Papierkassette nicht richtig eingesetzt ist. Setzen Sie die Papierkassette korrekt ein und schieben Sie sie fest ein.
Tonerpatrone (Magenta) vorbereiten. Der Tonerstand ist niedrig. Halten Sie eine neue Tonerpatrone bereit. Hinweis zum Austauschen von Tonerpatronen Tonerpatrone (Gelb) vorbereiten. Der Tonerstand ist niedrig. Halten Sie eine neue Tonerpatrone bereit. Hinweis zum Austauschen von Tonerpatronen Druckerspeicher voll: Statusmonitor betätigen Der Speicher ist voll mit Druckdaten, die aufgrund von Fehlern nicht ausgedruckt werden konnten.
Vorbereiten von Tonerpatronen So tauschen Sie Tonerpatronen aus Scannen ist beschränkt. Einloggen? Das Scannen wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert. Wählen Sie , und melden Sie sich mit einer Abteilungs-ID an, für die das Scannen nicht deaktiviert ist. Informationen zur Abteilungs-ID und PIN erhalten Sie bei Ihrem Administrator. Einstellen der Verwaltung per Abteilungs-IDs Authentisierung Gemeinsamer Schlüssel fehlgeschlagen. WEP-Einstellungen prüfen.
Das Scannen über das Bedienfeld wurde mithilfe der Verwaltung per Abteilungs-IDs deaktiviert. Melden Sie sich bei Remote UI im Systemmanager-Modus an, rufen Sie den Bearbeitungsbildschirm der entsprechenden Abteilungs-ID auf, und aktivieren Sie das Kontrollkästchen [Scanaufträge mit unbekannten IDs zulassen]. Blockieren von Aufträgen bei unbekannter Abteilungs-ID Die Tonerpatrone (Cyan) hat das Ende der Lebensdauer erreicht. Die Lebensdauer der Tonerpatrone hat das Ende erreicht.
Der Speicher ist voll. Einstellungen für den Originaltyp erneut eingeben. Ein Dokument konnte nicht gescannt werden, da die Speicherkapazität beim Kopieren überschritten wurde. Setzen Sie auf , und kopieren Sie. Auswählen von Dokumententypen Speicher ist voll. Geschützte Druckaufträge ausführen. Der Speicher ist voll mit geschützten Dokumenten, die nicht ausgedruckt wurden. Drucken Sie die geschützten Dokumente im Speicher.
Setzen Sie auf . Einschränken des Speicherns gescannter Dokumente auf USB-Speichergeräten WEP Schlüssel nicht richtig eingestellt. WEP-Einstellungen prüfen. Der Netzwerkschlüssel (WEP-Schlüssel) eines Wireless LAN-Routers, zu dem eine Verbindung hergestellt werden soll, ist im Gerät nicht richtig konfiguriert. Prüfen Sie den Netzwerkschlüssel (WEP-Schlüssel) des Wireless LAN-Routers, und konfigurieren Sie ihn erneut im Gerät.
0CC5-0CA Wenn ein Fehlercode erscheint Wenn das Drucken nicht funktioniert, Sie kein Fax oder gescanntes Dokument senden oder empfangen können oder ein anderer Fehler auftritt, wird dieser Fehler als dreistellige Zahl (Fehlercode) in einem Bericht gedruckt oder in einer Meldung auf dem Bildschirm angezeigt. Lesen Sie im Folgenden die möglichen Ursachen und Abhilfemaßnahmen zu den einzelnen Fehlercodes nach.
#018 Ein Fax konnte nicht gesendet werden, da das Gerät des Empfängers nicht antwortete, weil beispielsweise die Leitung belegt war. Wenn das Gerät des Empfängers ausgeschaltet oder die Leitung belegt ist, kann das Fax nicht gesendet werden. Bitten Sie den Empfänger, den Gerätestatus zu prüfen. Wenn Sie das Fax an eine Nummer im Ausland senden, fügen Sie Pausen in die Faxnummer ein. Senden von Faxen #022 Das Senden von Faxen von einem Computer ist deaktiviert.
Löschen Sie nicht benötigte Daten, um Platz auf dem USB-Speichergerät freizugeben, oder schließen Sie ein anderes USB-Speichergerät an. Direktes Speichern gescannter Dokumente auf einem USB-Speicher #406 Aufgrund eines Fehlers konnte ein gescanntes Dokument nicht auf einem USB-Speichergerät gespeichert werden. Trennen Sie das USB-Speichergerät von diesem Gerät, und schließen Sie es wieder an.
#753 Gescannte Daten können nicht per E-Mail verschickt oder in einem gemeinsamen Ordner gespeichert werden, da das LAN-Kabel getrennt ist. Prüfen Sie, ob das LAN-Kabel richtig angeschlossen ist. Herstellen einer Verbindung zu einem Wired LAN #755 Weil TCP/IP nicht richtig funktionierte, konnten gescannte Daten nicht per E-Mail gesendet oder im gemeinsamen Ordner gespeichert werden. Prüfen Sie , und nehmen Sie die Einstellungen richtig vor.
Konfigurieren grundlegender E-Mail-Einstellungen Konfigurieren erweiterter E-Mail-Einstellungen #804 Es werden keine Zugriffsrechte für den gemeinsamen Ordner gewährt. Prüfen Sie, ob der Anwendername und das Passwort, die für den Empfänger gespeichert sind, mit dem für den gemeinsamen Ordner gespeicherten Anwenderkonto (Anwendername und Passwort) übereinstimmen.
Der Anmeldename für die POP-Authentisierung ist nicht richtig eingestellt. Geben Sie den Anmeldenamen für die POP-Authentisierung richtig ein. #822 Eine Bilddatei auf einem USB-Speichergerät konnte nicht gedruckt werden, weil das Format der Bilddatei nicht unterstützt wird. Speichern Sie das Bild in einem unterstützten Dateiformat, damit Sie es drucken können. Drucken vom USB-Speicher (USB-Druck) #839 Ein Anwendername und Passwort für die SMTP-Authentisierung sind nicht richtig eingestellt.
Aufgrund eines POP-Authentisierungsfehlers konnte eine E-Mail nicht gesendet werden. Prüfen Sie die Einstellung, und versuchen Sie es erneut. Konfigurieren erweiterter E-Mail-Einstellungen #852 Das Gerät schaltet sich aus irgendeinem Grund AUS. Prüfen Sie, ob der Netzstecker fest an eine Netzsteckdose angeschlossen ist. #853 Ein Dokument konnte nicht gedruckt werden, da die Verarbeitungskapazität des Geräts für die Datenmenge nicht ausreichte.
Beim Drucken von einem Computer ist ein Fehler aufgetreten. Schalten Sie das Gerät AUS, warten Sie mindestens 10 Sekunden, und schalten Sie es dann wieder EIN. Versuchen Sie nach dem Neustart erneut zu drucken. #995 Ein Dokument in der Sendewarteschlange wurde verworfen. Senden Sie das Dokument gegebenenfalls erneut.
0CC5-0CC Allgemeine Probleme Wenn beim Betrieb des Geräts Probleme auftreten, prüfen Sie die Punkte in diesem Abschnitt, bevor Sie uns kontaktieren. Wenn die Probleme bestehen bleiben, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support.
0CC5-0CE Probleme mit Installation/Einstellungen Siehe auch Allgemeine Probleme. HINWEIS Symbole in der Beschreibung Problem mit der Wireless LAN-Verbindung Problem mit der Wired LAN-Verbindung Problem mit der USB-Verbindung Das Gerät kann nicht gleichzeitig über ein Wireless LAN, ein verkabeltes LAN und ein USB-Kabel mit einem Computer verbunden sein. Sie können nicht alle drei Verbindungstypen gleichzeitig verwenden.
Prüfen Sie, ob das Gerät ordnungsgemäß installiert und für eine Verbindung mit dem Netzwerk bereit ist. Wenn das Gerät keine Verbindung zum Wireless LAN herstellen kann Das Gerät wählt eine Verbindung zu einem nicht beabsichtigten Empfänger an (wenn das Netzwerk mit einem Dial-upRouter verbunden ist). Falls der Dial-up-Router keine Broadcast-Pakete übermitteln muss, stellen Sie den Dial-up-Router so ein, dass keine BroadcastPakete übermittelt werden.
* Eine Funktion, bei welcher der Wireless LAN-Router die Verbindung ablehnt, wenn die SSID bei dem Gerät, mit dem eine Verbindung hergestellt werden soll, auf "ANY" gesetzt wurde oder leer ist. Wenn Sie die Einstellungen des Wireless LAN-Routers ändern müssen Wenn der Wireless LAN-Router wie unten beschreiben eingerichtet ist, ändern Sie die Einstellungen des Routers. Die MAC-Adresspaketfilterung ist eingerichtet. Wenn nur IEEE 802.
0CC5-0CF Probleme beim Kopieren Siehe auch Allgemeine Probleme. Die Druckergebnisse sind nicht zufriedenstellend. Das Papier wellt sich oder weist Falten auf.
0CC5-0CH Probleme beim Drucken Siehe auch Allgemeine Probleme. Die Druckergebnisse sind nicht zufriedenstellend. Das Papier wellt sich oder weist Falten auf. Wenn Sie nicht ordnungsgemäß drucken können Sie können nicht drucken. Ist ein Druckertreiber korrekt auf dem Computer installiert? Installationshandbuch für den MF-Treiber Das Drucken scheint lange zu dauern. * Drucken oder löschen Sie Daten im Speicher.
0CC5-0CJ Probleme beim Faxen/Telefonieren (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Siehe auch Allgemeine Probleme. Probleme beim Senden Sie können ein Fax nicht senden. Ist die externe Telefonleitung belegt? Warten Sie, bis die Leitung frei ist. Ist ein Fehler aufgetreten? Drucken Sie einen Kommunikationsverwaltungsbericht, und prüfen Sie ihn.
0CC5-0CK Wenn Sie nicht ordnungsgemäß drucken können Wenn die Druckergebnisse nicht zufriedenstellend sind oder sich das Papier wellt oder Falten aufweist, probieren Sie die folgenden Abhilfemaßnahmen aus. Wenn die Probleme bestehen bleiben, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support.
0CC5-0CL Die Druckergebnisse sind nicht zufriedenstellend Verschmutzungen im Gerät können die Druckergebnisse beeinträchtigen. Pflegen und reinigen Sie zunächst das Gerät. Reinigen des Geräts Am unteren Rand von Ausdrucken erscheinen Flecken Drucken Sie die Daten ohne Ränder? Dieses Symptom tritt auf, wenn im Druckertreiber kein Rand eingestellt ist. Ränder von 5 mm oder weniger an den Papierkanten bzw. von 10 mm oder weniger an Briefumschlagskanten können mit diesem Gerät nicht gedruckt werden.
Verwenden Sie geeignetes Papier? Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus. Papier Einlegen von Papier Geht der Toner aus? Prüfen Sie den Tonerstand, und tauschen Sie die Tonerpatronen gegebenenfalls aus. Austauschen von Tonerpatronen Ausdrucke sind blass Geht der Toner aus? Prüfen Sie den Tonerstand, und tauschen Sie die Tonerpatronen gegebenenfalls aus.
Geht der Toner aus? Prüfen Sie den Tonerstand, und tauschen Sie die Tonerpatronen gegebenenfalls aus. Austauschen von Tonerpatronen Die Ausdrucke sind gräulich Geht der Toner aus? Prüfen Sie den Tonerstand, und tauschen Sie die Tonerpatronen gegebenenfalls aus.
0CC5-0CR Das Papier weist Falten auf oder wellt sich Papier weist Falten auf Ist das Papier richtig eingelegt? Wenn das eingelegte Papier über die Füllhöhenmarkierung hinausragt oder schräg eingelegt ist, können sich Falten bilden. Einlegen von Papier Verwenden Sie feuchtes Papier? Tauschen Sie das Papier gegen geeignetes Papier aus. Einlegen von Papier Verwenden Sie geeignetes Papier? Prüfen Sie, welches Papier geeignet ist, und tauschen Sie das verwendete Papier gegebenenfalls aus.
0CC5-0CS Papier wird nicht richtig eingezogen Ausdrucke sind schräg Sind die Papierführungen an den Papierkanten ausgerichtet? Wenn die Papierführungen zu lose oder zu eng eingestellt sind, kommt es zu schrägen Ausdrucken. Einlegen von Papier Ist die manuelle Zufuhr die Papierquelle? Legen Sie das Papier in die Papierkassette ein. Einlegen von Papier in die Papierkassette Drucken Sie auf gewellte Briefumschläge? Glätten Sie die Briefumschläge, und drucken Sie erneut.
0CC5-0CU Wenn sich ein Problem nicht beheben lässt Wenn Sie ein Problem anhand der Informationen in diesem Kapitel nicht beheben können, wenden Sie sich an Ihren autorisierten Canon Händler vor Ort oder den Canon Support. WICHTIG Zerlegen Sie das Gerät nicht, und reparieren Sie es nicht selbst Wenn Sie das Gerät zerlegen oder selbst reparieren, erlischt unter Umständen die Garantie.
0CC5-0CW Wartung In diesem Kapitel werden Wartung und Reinigung des Geräts sowie das Initialisieren von Einstellungen beschrieben.
0CC5-0CX Reinigen des Geräts Reinigen Sie das Gerät regelmäßig, damit sich die Druckqualität nicht verschlechtert und damit Sie es sicher und problemlos verwenden Wartung und Überprüfung können. Lesen Sie die Sicherheitshinweise, bevor Sie mit dem Reinigen beginnen.
0CC5-0CY Gehäuse Wischen Sie das Gehäuse des Geräts und insbesondere den Bereich um die Lüftungsschlitze regelmäßig ab, damit das Gerät in einwandfreiem Zustand bleibt. 1 Schalten Sie das Gerät AUS, und trennen Sie das Netzkabel von der Netzsteckdose. Wenn Sie das Gerät ausschalten, werden die Daten, die auf den Druck warten, gelöscht.
0CC5-0E0 Vorlagenglas Reinigen Sie das Vorlagenglas und die Unterseite der Zufuhr regelmäßig von Staub, damit sich auf den Dokumenten und den Ausdrucken keine Flecken bilden. 1 Schalten Sie das Gerät AUS, und trennen Sie das Netzkabel von der Netzsteckdose. Wenn Sie das Gerät ausschalten, werden die Daten, die auf den Druck warten, gelöscht.
0CC5-0E1 Zufuhr Staub und Grafitpulver können an der Rolle in der Zufuhr haften und Flecken auf den Ausdrucken verursachen. Reinigen Sie die Zufuhr wie im Folgenden beschrieben. Zum Reinigen der Zufuhr benötigen Sie zehn Blatt normales A4- oder Letter-Papier. Legen Sie sie in die Einlegen von Dokumenten Zufuhr ein, bevor Sie die folgenden Schritte ausführen. 1 2 3 4 Drücken Sie .
0CC5-0E2 Fixiereinheit Schmutz kann an der Fixiereinheit im Gerät haften und schwarze Streifen auf Ausdrucken verursachen. Reinigen Sie die Fixiereinheit wie im Folgenden beschrieben. Beachten Sie, dass die Fixiereinheit nicht gereinigt werden kann, wenn sich Dokumente in der Druckwarteschlange befinden. Zum Reinigen der Fixiereinheit benötigen Sie normales A4- oder Letter-Papier.
0CC5-0E3 Transferriemen Schmutz kann am Transferriemen im Gerät haften und eine Verschlechterung der Druckqualität verursachen. Reinigen Sie den Transferriemen wie im Folgenden beschrieben. Beachten Sie, dass der Transferriemen nicht gereinigt werden kann, wenn sich Dokumente in der Druckwarteschlange befinden. 1 2 3 4 Drücken Sie . Wählen Sie mit / die Option , und drücken Sie Wählen Sie , und drücken Sie Drücken Sie . . . Die Reinigung beginnt.
0CC5-0E4 Austauschen von Tonerpatronen Am Gerät wird eine Meldung angezeigt, wenn eine Tonerpatrone fast leer ist. Beachten Sie, dass die Druckqualität sinkt, wenn Sie keine Abhilfemaßnahme ergreifen und einfach weiter drucken. Sie können die restliche Tonermenge im Display prüfen. Wenn eine Meldung angezeigt wird Wenn die Ausdrucke von schlechter Qualität sind Anzeigen des Tonerstands Wenn eine Meldung angezeigt wird Welche Meldung angezeigt wird, hängt von der restlichen Tonermenge ab.
Diese Meldung, die zusammen mit der jeweiligen Farbe der Tonerpatrone erscheint, weist Sie darauf hin, dass die Druckqualität möglicherweise nicht zufriedenstellend ist. Dies kann der Fall sein, wenn eine Tonerpatrone in das Gerät eingesetzt ist, die das Ende der Lebensdauer erreicht hat. Es empfiehlt sich, die Patrone durch eine neue zu ersetzen. Mit gelangen Sie wieder zum Hauptbildschirm. WICHTIG Sie können mit dem Drucken fortfahren, aber die Druckqualität ist eventuell verringert.
0CC5-0E5 So tauschen Sie Tonerpatronen aus Lesen Sie vor dem Austauschen von Tonerpatronen die Sicherheitshinweise in Verbrauchsmaterial. 1 Öffnen Sie die vordere Abdeckung. 2 Ziehen Sie das Patronenfach heraus. MF8580Cdw / MF8550Cdn / MF8540Cdn MF8280Cw / MF8230Cn 3 Ziehen Sie die Tonerpatrone gerade nach oben aus dem Gerät. 4 Nehmen Sie die Ersatzpatrone aus der Schutzhülle.
WICHTIG: Beim Herausziehen des Schutzstreifens Wenn der Schutzstreifen in der Tonerpatrone bleibt, kann sich die Ausdruckqualität verschlechtern, und zwar auch bei Faxen. Beachten Sie, dass der erneute Ausdruck eines Faxes nicht möglich ist, weil die Faxfunktion die Daten nach dem Ausdruck löscht. Ziehen Sie den Schutzstreifen nicht schräg oder zur Seite heraus. Wenn der Schutzstreifen reißt, können Sie ihn unter Umständen nicht vollständig herausziehen.
0CC5-0E6 Hinweis zum Austauschen von Tonerpatronen Die durchschnittliche Kapazität der Tonerpatronen geht aus der Tabelle unten hervor. Kaufen Sie die Tonerpatronen bei Ihrem autorisierten Canon Händler vor Ort. Für eine optimale Druckqualität empfehlen wir Canon Original-Tonerpatronen. Der Canon Support kann Ihnen einen Händler in Ihrer Nähe nennen. Beachten Sie beim Umgang mit und der Lagerung von Tonerpatronen die Sicherheitshinweise ( Verbrauchsmaterial).
0CC5-0E7 Transport des Geräts Das Gerät ist schwer. Befolgen Sie unbedingt die folgenden Anweisungen, um beim Transport des Geräts Verletzungen zu vermeiden, Wichtige Sicherheitsvorschriften und lesen Sie vorher unbedingt die Sicherheitshinweise. 1 Schalten Sie das Gerät und den Computer AUS. Wenn Sie das Gerät ausschalten, werden die Daten, die auf den Druck warten, gelöscht.
MF8280Cw / MF8230Cn 6 Stellen Sie das Gerät vorsichtig am neuen Aufstellort ab. Informationen zum Aufstellen des Geräts nach dem Transport finden Sie in 㻢㻜㻠㻌㻛㻌㻢㻤㻝 Inbetriebnahme des Geräts.
0CC5-0E8 Aufrechterhalten und Verbessern der Druckqualität Wenn die Druckergebnisse nicht zufriedenstellend sind und zum Beispiel die Bildqualität schlecht ist, eine schlechte Reproduzierbarkeit vorliegt oder die Farben nicht übereinstimmen, führen Sie zum Test die unten aufgeführten Anpassungen durch. Gradation automatisch justieren Wenn die Ausdrucke in Dichte und Helligkeit deutlich von den Originalen abweichen, führen Sie aus, um die Farbreproduktion zu verbessern.
0CC5-0E9 Korrektur der Gradation Als Gradation bezeichnet man die Abstufungen zwischen dunklen und hellen Tönen einer Farbe. Je mehr Farbabstufungen gedruckt werden, desto natürlicher erscheinen die Ausdrucke. Wenn die Farbreproduktion unzureichend ist und die Ausdrucke in Dichte und Helligkeit deutlich von den Originalen abweichen, führen Sie die geeignete Funktion zur automatischen Justage aus. Prüfen Sie vor der Justage der Gradation die restliche Tonermenge.
7 Legen Sie das Bild für die Justage mit der bedruckten Seite nach unten auf das Vorlagenglas. Legen Sie das Bild für die Justage so auf, dass der schwarze Streifen auf die Rückseite des Geräts weist. 8 9 Schließen Sie die Zufuhr vorsichtig. Drücken Sie (Farbe). Das Bild für die Justage wird gescannt, und die Justage beginnt. Nach etwa 30 Sekunden wird ein zweites Bild für die Justage gedruckt.
Transferriemen Schnell justieren Mit dieser Justagefunktion lässt sich der mit hergestellte optimierte Zustand aufrechterhalten. Beachten Sie, dass Sie diese Funktion nicht durchführen können, wenn gerade bestimmte andere Funktionen wie das Scannen und Drucken ausgeführt werden. Wenn das Ergebnis dieser Justagefunktion nicht zufriedenstellend ist, führen Sie aus. Diese Justagefunktion wird nach dem Austauschen einer Tonerpatrone unter Umständen automatisch ausgeführt.
und drücken Sie 5 . Bestätigen Sie den Vorgang, und drücken Sie . Die Justage beginnt. Nach etwa 1 Minute wird ein Bild für die Justage gedruckt. 6 7 Öffnen Sie die Zufuhr, sobald der während des Druckens angezeigte Bildschirm ausgeblendet wird. Legen Sie das Bild für die Justage mit der bedruckten Seite nach unten auf das Vorlagenglas. Legen Sie das Bild für die Justage so auf, dass der schwarze Streifen auf die Rückseite des Geräts weist. 8 9 Schließen Sie die Zufuhr vorsichtig.
0CC5-0EA Korrektur von Druck-Farbverzerrungen Druck-Farbverzerrungen treten auf, wenn beim Drucken eines Bilds mit mehreren Tonerpatronen die Positionen der Farben nicht präzise aufeinander abgestimmt sind. In diesem Fall erscheinen die Ausdrucke verschwommen. Führen Sie die folgenden Schritte aus, wenn es zu Druck-Farbverzerrungen kommt. Diese Justagefunktion wird in bestimmten Fällen automatisch durchgeführt, unter anderem nach dem Austauschen von Tonerpatronen.
0CC5-0EC Justieren der Werte für die Textfarbenreproduzierbarkeit in Farbdokumenten Wenn die Kopierergebnisse von schwarzem oder schwärzlichem Text nicht zufriedenstellend sind, können Sie die Farbreproduzierbarkeit mit dieser Anpassung verbessern. Dieser Anpassungswert kann für die Zufuhr und das Vorlagenglas getrennt eingestellt werden. HINWEIS Die Einstellungen werden auf Farbkopien angewendet, wenn auf oder gesetzt ist ( Auswählen von Dokumententypen).
0CC5-0EE Drucken von Berichten und Listen Anhand gedruckter Berichte und Listen können Sie Faxergebnisse und die Geräteeinstellungen prüfen. SE Ergebnisbericht Sie können die Logs zu gesendeten Dokumenten drucken. MF8280Cw) SE Ergebnisbericht (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / Bericht Kommunikationsverwaltung Sie können die Logs zu gesendeten und empfangenen Dokumenten drucken.
0CC5-0EF SE Ergebnisbericht (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Sie können die Fax- oder E-Mail-Logs für gesendete Dokumente sowie für nach dem Scannen in einem gemeinsamen Ordner gespeicherte Dokumente in einem SE-Ergebnisbericht drucken. Sie können den Bericht nach jeder Übertragung oder nur bei Sendefehlern drucken.
Kommunikationsverwaltung (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw)). HINWEIS So drucken Sie einen Teil des Faxdokuments im Bericht Wenn Sie oder wählen, kann ein Teil des Faxdokuments in den Bericht eingefügt werden. Wählen Sie für .
0CC5-0EH Bericht Kommunikationsverwaltung (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Sie können die Fax- oder E-Mail-Logs für gesendete und empfangene Dokumente in einem Kommunikationsverwaltungsbericht drucken. Sie können den Bericht nach jeweils 40 Übertragungen oder manuell drucken.
0CC5-0EJ EM Ergebnisbericht (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Sie können die Logs für empfangene Faxdokumente in einem EM-Ergebnisbericht drucken. Sie können den Bericht nach jeder Übertragung oder nur bei Empfangsfehlern drucken. (Bericht) Wählen Sie die Druckeinstellung Wählen Sie diese Einstellung, wenn keine EM-Ergebnisberichte gedruckt werden sollen.
0CC5-0EK Bericht Verwaltung Abteilungs-ID Wenn die Verwaltung per Abteilungs-IDs aktiviert ist, können Sie die Gesamtzahl der Ausdrucke für jede in einem Bericht zur Verwaltung per Abteilungs-IDs drucken. Indem Sie die Gesamtzahl der Ausdrucke prüfen, können Sie die Papier- und Tonervorräte besser verwalten.
0CC5-0EL Adressbuchliste (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Sie können eine Liste der unter , und im Adressbuch gespeicherten Empfänger drucken.
0CC5-0ER Anwenderdatenliste/Datenliste Systemmanager Sie können eine Liste der Einstellungen ( Liste der Menüeinstellungen) sowie die im Gerät gespeicherten Einstellungen in einer Anwender- oder Systemmanagerdatenliste drucken. Beide Listen enthalten das im Gerät gespeicherte Papierformat und den Papiertyp sowie die Druckeinstellungen von , und .
0CC5-0ES Liste IPSec Richtlinie Sie können eine Liste der Richtliniennamen und die im Gerät gespeicherten IPSec-Einstellungen in einer IPSec-Richtlinienliste drucken.
0CC5-0EU Fontliste PCL (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Sie können eine Liste der im Gerät verfügbaren Schriftarten drucken.
0CC5-0EW Anzeigen des Zählerwerts Sie können die Gesamtzahl der für Farb- bzw. Schwarzweißausdrucke verwendeten Seiten prüfen. In diesen Gesamtzahlen sind über Computer erstellte Kopien und Ausdrucke sowie Faxe, Berichte und Listen inbegriffen.
0CC5-0EX Initialisieren von Einstellungen Sie können die folgenden Einstellungen zurücksetzen: Initialisieren des Menüs Initialisieren von Schlüsseln und Zertifikaten Initialisieren des Adressbuchs (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Initialisieren der Einstellungen Systemverwaltung 㻢㻞㻟㻌㻛㻌㻢㻤㻝
0CC5-0EY Initialisieren des Menüs Sie können die Einstellungen des Geräts auf die werkseitigen Standardwerte zurücksetzen ( Liste der Menüeinstellungen). HINWEIS Erläuterungen zum Initialisieren der Einstellungen in und finden Sie Initialisieren der Einstellungen Systemverwaltung. in Wählen Sie die gewünschte Option Optionen, die initialisiert werden können Wählen Sie die Einstellung, die Sie initialisieren wollen.
0CC5-0F0 Initialisieren von Schlüsseln und Zertifikaten Sie können die Einstellungen für Schlüsselpaare und digitale Zertifikate auf die werkseitigen Standardwerte zurücksetzen. Beachten Sie, dass alle im Gerät registrierten Schlüsselpaare und Zertifikate (mit Ausnahme der vorinstallierten digitalen Zertifikate) beim Initialisieren gelöscht werden.
0CC5-0F1 Initialisieren des Adressbuchs (nur MF8580Cdw / MF8550Cdn / MF8540Cdn / MF8280Cw) Sie können die Einstellungen für das Adressbuch auf die werkseitigen Standardwerte zurücksetzen. Beachten Sie, dass alle im Adressbuch gespeicherten Informationen beim Initialisieren gelöscht werden.
0CC5-0F2 Initialisieren der Einstellungen Systemverwaltung Sie können die Einstellungen des Geräts auf die werkseitigen Standardwerte zurücksetzen ( Initialisierung einiger Einstellungen muss das Gerät neu gestartet werden. zu initialisierende Option Liste der Menüeinstellungen).
0CC5-0FR Anhang Dieses Kapitel enthält technische Daten dieses Geräts, Anweisungen zur Verwendung der e-Anleitung, Haftungsausschluss, CopyrightInformationen und andere wichtige Informationen für die Kunden.
0CC5-0FS Praktische Funktionen Probieren Sie die in diesem Abschnitt beschriebenen Funktionen einfach einmal aus. Die Funktionen sind unter vier Überschriften zusammengefasst: "Umweltfreundlich Geld sparen", "Effizienzfunktionen", "Digitalisieren" und "Weitere Funktionen.
0CC5-0FU Umweltfreundlich Geld sparen Doppelseitiger Druck (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Den doppelseitigen Druck können Sie für Kopien, von einem Computer gesendete Druckaufträge und sogar eingehende Faxe verwenden. Da sich dabei der Papierverbrauch im Vergleich zum einseitigen Druck halbiert, sparen Sie die Hälfte der können Sie sogar die Einstellungen für doppelseitigen Druck und das Kopieren Papierkosten. Mit der Taste mehrerer Seiten auf ein Blatt auswählen und so noch mehr Papier sparen.
Weitere Informationen über diese Funktion finden Sie in Wechseln in den Schlafmodus. Einsparen von Toner Sie möchten mehrseitige Dokumente oder Entwürfe drucken, für die keine optimale Qualität erforderlich ist? Es gibt eine Einstellung, bei der weniger Toner verwendet wird. Damit erzielen Sie eine ausreichende Qualität und sparen gleichzeitig Toner und Geld. Weitere Informationen über diese Funktion finden Sie in Sparen von Toner.
0CC5-0FW Effizienzfunktionen Adressbuch (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Wenn Sie Fax- und E-Mail-Adressen in das Adressbuch eingeben, sparen Sie sich die Mühe, bei jedem Sendevorgang die Ziffern und Buchstaben einzeln einzugeben. Mit der Funktion können Sie häufig verwendete Adressen schnell anzeigen und Dokumente problemlos an die gewünschten Empfänger senden. Sie können die Adressbuchdaten auf einem Computer speichern und so eine Sicherungskopie wichtiger Kontaktdaten anlegen.
Weitere Informationen über diese Funktion finden Sie in Drucken vom USB-Speicher (USB-Druck). Scannen und Speichern auf einem USB-Stick Konvertieren Sie auf Papier vorliegende Dokumente in JPEG- oder PDF-Dateien, und speichern Sie sie auf einem direkt in das Gerät eingesetzten USB-Stick. Sie brauchen die Dateien nicht auf einem Computer zu speichern, und Sie benötigen keine Spezialsoftware.
0CC5-0FX Digitalisieren Scannen und Senden per E-Mail (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Senden Sie gescannte Dokumente per E-Mail, ohne den Computer überhaupt einzuschalten. Konvertieren Sie gescannte Dokumente einfach direkt am Gerät in E-Mail-Anhänge. Das ist die perfekte Funktion für alle, die keine Zeit mit dem Computer verschwenden möchten.
Bilder, die Sie mit diesem Gerät gescannt, gedruckt oder anderweitig reproduziert haben, verwenden dürfen, holen Sie vorab rechtlichen Rat ein. Weitere Informationen über diese Funktion finden Sie in Konfigurieren von Scaneinstellungen in ScanGear MF. Durchsuchbare PDFs Sie können gescannte Dokumente in normale PDF-Dateien konvertieren oder den Text in dem gescannten Dokument so konvertieren, dass er durchsucht werden kann.
0CC5-0FY Weitere Funktionen Einfaches Drucken mit Google Cloud Print Stellen Sie über einen Laptop oder ein Smartphone eine Verbindung zu Google Cloud Print her, senden Sie die Daten, und die gewünschten Dokumente werden gedruckt. Mit diesem Gerät, Google Cloud Print und einem mobilen Gerät können Sie von überall aus drucken. Weitere Informationen über diese Funktion finden Sie in Verwenden von Google Cloud Print.
Faxempfang überall (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Sie möchten nie wieder ein Fax verpassen, weil Sie gerade nicht im Büro sind? Stellen Sie einen Empfänger für die Weiterleitung ein, und alle Faxe, die am Gerät eingehen, werden direkt an Sie übermittelt. Oder, was noch komfortabler ist, Sie stellen als Empfänger für die Weiterleitung die E-Mail-Adresse Ihres Tablets oder Mobilgeräts ein. Weitere Informationen über diese Funktion finden Sie in Weiterleiten von empfangenen Faxen.
0CC5-0F3 Technische Daten Änderungen an den technischen Daten des Geräts aufgrund von Verbesserungen bleiben vorbehalten.
0CC5-0F4 Technische Daten des Geräts MF8580Cdw / MF8550Cdn / MF8540Cdn Typ Tischgerät Stromversorgung *1 220 bis 240 V, 50/60 Hz (Die Anforderungen bezüglich der Stromversorgung hängen von dem Land ab, in dem Sie das Gerät erworben haben.) Maximum 1,200 W oder weniger Durchschnitt im Standby-Modus ca. 25 W Leistungsaufnahme Durchschnitt im Schlafmodus ca. 1 W Durchschnitt im Schlafmodus (bei drahtlosen Verbindungen) ca. 2 W Bei über Netzschalter ausgeschaltetem Gerät maximal 0.
ca. 20 W Leistungsaufnahme Durchschnitt im Schlafmodus ca. 1 W Durchschnitt im Schlafmodus (bei drahtlosen Verbindungen) ca. 2 W Bei über Netzschalter ausgeschaltetem Gerät maximal 0.5 W Aufwärmdauer*2 maximal 23 Sekunden Gewicht*3 ca.
0CC5-0F5 Technische Daten der Papierkassette (optional) (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Kassetteneinheit V1 Papierkapazität Geeignetes Papier 250 Blatt (60 bis 90 g/m²) Papier Stromversorgung Über Hauptgerät Abmessungen (B x T x H) 430 x 454 x 102 mm Gewicht ca.
0CC5-0F7 Technische Daten des Wireless LAN-Moduls (nur MF8580Cdw / MF8280Cw) Standard IEEE 802.11g, IEEE 802.11b, IEEE 802.11n Übertragungsverfahren DS-SS-System, OFDM-System Frequenzbereich 2.412 bis 2.472 MHz IEEE 802.11g 6/9/12/18/24/36/48/54 MBit/s IEEE 802.11b 1/2/5,5/11 MBit/s Datenübertragungsrate IEEE 802.
0CC5-0F8 Dokumententypen Unterstützte Dokumententypen Vorlagenglas Zufuhr Typ Normalpapier/Schweres Papier/Fotografien/Kleinformatige Dokumente (z. B. Karteikarten)/Spezialpapier (z. B. Transparentpapier, Folien usw.)/Broschüren (bis zu einer Dicke von 20 mm) Normalpapier (einseitige Dokumente/Dokumente mit mehreren Seiten des gleichen Formats, der gleichen Dicke und des gleichen Gewichts) Format (B x L) bis zu 215.9 x 297 mm Maximalformat: 215.9 x 355.6 mm Minimalformat: 139.
0CC5-0F9 Scanbereich Die schattierten Bereiche in der Tabelle unten zeigen den Scanbereich des Dokuments. Stellen Sie sicher, dass Text und Bilder in Ihren Dokumenten in den schattierten Bereich passen. Der Scanbereich variiert abhängig von der verwendeten Funktion und wo die Dokumente platziert wurden (in der Zufuhr oder auf dem Vorlagenglas). Vorlagenglas Zufuhr Kopie HINWEIS: HINWEIS: Der Scanbereich für das Kopieren kann sich vom Bedruckbarer bedruckbaren Bereich unterscheiden.
0CC5-0FA Papier Unterstützte Papierformate Im Folgenden sind die Papierformate aufgelistet, die in die Papierkassette, die manuelle Zufuhr und die optionalen Papierkassetten eingelegt werden können. MF8580Cdw / MF8550Cdn / MF8540Cdn A4 (210.0 x 297.0 mm) *1 *2 B5 (182.0 x 257.0 mm) *1 A5 (148.0 x 210.0 mm) Legal (215.9 x 355.6 mm) *1 Letter (215.9 x 279.4 mm) *1 *2 Statement (139.7 x 215.9 mm) Executive (184.0 x 266.7 mm) *1 Officio (215.9 x 317.5 mm) B-officio (215.9 x 355.6 mm) M-officio (215.
Briefumschlag COM10 (104.7 x 241.3 mm) Briefumschlag Monarch (98.4 x 190.5 mm) Briefumschlag C5 (162 x 229 mm) Briefumschlag DL (110 x 220 mm) Anwenderdefiniertes Papierformat *2 *1 Das Gerät kann empfangene Faxdokumente ausdrucken. *2 Papier in anwenderdefiniertem Format mit einer Breite von 83 bis 215.9 mm und einer Länge von 127 bis 355.6 mm kann in die Papierkassette oder die manuelle Zufuhr eingelegt werden. HINWEIS Standardmäßig ist das Gerät auf das Papierformat A4 eingestellt.
Recyclingpapier 60 bis 74 g/m² 150 Blatt 1 Blatt Farbiges Papier 60 bis 74 g/m² 150 Blatt 1 Blatt 100 bis 110 g/m² 111 bis 130 g/m² Beschichtetes Papier 100 Blatt 1 Blatt 131 bis 160 g/m² 161 bis 220 g/m² - Folien *1 50 Blatt 1 Blatt Etikett 50 Blatt 1 Blatt Karteikarte 15 Blatt 1 Blatt Briefumschlag 10 Blatt 1 Blatt *1 Verwenden Sie Folien für Laserdrucker.
0CC5-0FE Technische Daten der Kopierfunktion Text/Foto/Karte (Geschwindigkeit) (Farbe) 300 x 300 dpi Scanauflösung Text/Foto/Karte, Text/Foto/Karte (Geschwindigkeit) (SW) 300 x 600 dpi Text/Foto/Karte (Qualität), Druckbild, Text 600 x 600 dpi Ausgabeauflösung 600 x 600 dpi Kopierfaktor 100% 1:1, 400% Max, 200%, 141% A5->A4, 70% A4->A5, 50%, 25% Min.
0CC5-0FF Technische Daten der Faxfunktion (nur MF8580Cdw / MF8550Cdn / MF8280Cw) Verwendete Leitung Festnetz (PSTN) *1 Kommunikationsmodus Super G3, G3 Komprimierungsmethode MH, MR, MMR, JBIG Modemgeschwindigkeit Super G3: 33,6 Kbit/s, G3: 14,4 Kbit/s Automatische Reduzierung Übertragungsgeschwindigkeit ca. 3 Sekunden pro Seite *2 (ECM-JBIG, Übertragung aus dem Speicher mit 33,6 Kbit/s) Senden aus Speicher/Empfang im Speicher maximal ca.
0CC5-0FH Technische Daten der Scanfunktion Typ Farbscanner Maximales Scanformat Vorlagenglas: maximal 216 x 297 mm Zufuhr: maximal 216 x 356 mm Scanauflösung Optische Auflösung Vorlagenglas: maximal 600 x 600 dpi Zufuhr: maximal 300 x 300 dpi Auflösung mit Softwareinterpolation 9.600 x 9.600 dpi Scangeschwindigkeit*1 (A4, 300 x 600 dpi) Farbe: 10 Blatt/Minute Schwarzweiß: 20 Blatt/Minute Hostschnittstelle 100BASE-TX 10BASE-T Hi-Speed USB USB IEEE 802.
0CC5-0FJ Technische Daten der Druckfunktion Druckmethode Indirektes elektrostatisches System (Fixierung bei Bedarf) Papierkapazität MF8580Cdw / MF8550Cdn / MF8540Cdn Manuelle Zufuhr: ca. 50 Blatt (60 bis 90 g/m²) Papierkassette: ca. 250 Blatt (60 bis 90 g/m²) Kassetteneinheit V1 (optional): ca. 250 Blatt (60 bis 90 g/m²) MF8280Cw / MF8230Cn Manuelle Zufuhr: 1 Blatt Papierkassette: ca. 150 Blatt (60 bis 90 g/m²) Kapazität des Ausgabefachs *1 (frischer Stapel Papier des Formats A4) ca.
0CC5-0FK Technische Daten der E-Mail-Sendefunktion (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Kommunikationsprotokoll *1 SMTP Datenformat PDF (Kompakt), PDF Schwarzweiß PDF: 300 dpi (MMR-Komprimierung) PDF (Kompakt): Text 300 dpi, Hintergrund 150 dpi Auflösung Farbe PDF: 200 dpi (JPEG-Komprimierung) PDF (Kompakt): Text 300 dpi, Hintergrund 150 dpi Systemumgebung Windows XP/Vista/7/8/Server 2003/Server 2008/Server 2012 Solaris Version 2.6 oder höher (mit Samba 2.2 oder höher) Mac OS X Red Hat Linux 7.
0CC5-0FL Technische Daten des Scannens in gemeinsame Ordner (nur MF8580Cdw / MF8550Cdn / MF8540Cdn) Kommunikationsprotokoll SMB (TCP/IP) Datenformat PDF (Kompakt), PDF, JPEG, TIFF Schwarzweiß JPEG: 300 dpi TIFF: 300 dpi (MMR-Komprimierung) PDF: 300 dpi (MMR-Komprimierung) PDF (Kompakt): Text 300 dpi, Hintergrund 150 dpi Auflösung Farbe JPEG: 300 dpi TIFF: 300 dpi (JPEG-Komprimierung) PDF: 200 dpi (JPEG-Komprimierung) PDF (Kompakt): Text 300 dpi, Hintergrund 150 dpi Systemumgebung Windows XP/Vista/7/
0CC5-0H0 Verwenden der e-Anleitung Die e-Anleitung ist ein Handbuch, das auf dem Computer angezeigt werden kann und alle Funktionen des Geräts beschreibt. Sie können nach der geplanten Verwendung suchen oder ein Schlüsselwort eingeben, um schnell die gesuchte Seite zu finden. Sie können die eInstallieren der e-Anleitung Anleitung nutzen, indem Sie sie auf dem Computer installieren oder direkt von der CD-Rom starten.
0CC5-0H3 Installieren der e-Anleitung Installieren Sie die e-Anleitung mithilfe der mit dem Gerät gelieferten CD-ROM auf dem Computer. Die Beschriftung der CD-ROM mit den Handbüchern kann je nach dem Land bzw. der Region oder dem Modell des Geräts variieren. Über die Multi-lingual User Manual CD 1 Legen Sie die Multi-lingual User Manual CD in das Laufwerk des Computers ein.
3 Wählen Sie [USB-Verbindung], und klicken Sie auf [Weiter]. HINWEIS: Wählen Sie [USB-Verbindung], auch wenn die Verbindung mit einem Netzwerk besteht. 4 Deaktivieren Sie alle Kontrollkästchen mit Ausnahme von [Handbücher], und klicken Sie auf [Installieren]. 5 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Ja], wenn Sie dieser zustimmen.
Die Installation beginnt. Warten Sie eine Weile. Der Vorgang kann einige Zeit in Anspruch nehmen. 6 Klicken Sie auf [Beenden]. 7 Klicken Sie auf [Weiter] [Beenden].
Anzeigen der e-Anleitung Doppelklicken Sie auf dem Desktop auf das Symbol [e-Anleitung Serie MF8500C_MF8200C]. Aktivieren Sie im Browser das JavaSkripting, bevor Sie die e-Anleitung verwenden. HINWEIS Wenn eine Sicherheitswarnung angezeigt wird Klicken Sie auf [Geblockte Inhalte zulassen]. TIPPS zum Anzeigen der e-Anleitung direkt von der CD-ROM Je nach dem verwendeten Betriebssystem wird eventuell eine Sicherheitswarnung angezeigt. Lassen Sie in diesem Fall die Anzeige des Inhalts im Webbrowser zu.
Über die User Software CD-ROM 1 Legen Sie die User Software CD-ROM in das Laufwerk des Computers ein. Wählen Sie eine Sprache, und klicken Sie auf [OK], wenn Sie dazu aufgefordert werden. Wenn der Bildschirm [CD-ROM-Installation] nicht angezeigt wird, nehmen Sie die CD-ROM aus dem Laufwerk, und legen Sie sie erneut ein, oder schlagen Sie in Anzeigen des Bildschirms [CD-ROM-Installation] oder [Select language] nach. 2 Klicken Sie auf [Handbücher]. 3 Klicken Sie auf [e-Anleitung].
0CC5-0H4 Deinstallieren der e-Anleitung Sie können die e-Anleitung vom Computer entfernen und so den Zustand vor der Installation der e-Anleitung wiederherstellen. Die Beschriftung der CD-ROM mit den Handbüchern kann je nach dem Land bzw. der Region oder dem Modell des Geräts variieren. Über die Multi-lingual User Manual CD 1 Öffnen Sie den Windows-Explorer. Windows XP/Vista/7/Server 2003/Server 2008 Klicken Sie im Menü [Start] auf [Alle Programme] (oder [Programme]) [Zubehör] [Windows-Explorer].
4 Klicken Sie auf [Deinstallieren]. Die Deinstallation beginnt. Warten Sie eine Weile. Der Vorgang kann einige Zeit in Anspruch nehmen. 5 Klicken Sie auf [Beenden]. 6 Klicken Sie auf [Zurück] [Beenden].
㻢㻢㻞㻌㻛㻌㻢㻤㻝
0CC5-0H5 Bildschirmlayout der e-Anleitung Die e-Anleitung ist auf mehrere Bildschirme unterteilt und der Inhalt jedes Bildschirms variiert. Startseite Erscheint beim Starten der e-Anleitung. Canon Klicken Sie hier, um zur Startseite zurückzukehren. Registerkarte [Inhalt]/Registerkarte [Suchen] Klicken Sie hier, um zwischen dem Inhaltsverzeichnis und der Suche umzuschalten. Inhalt Die Titel der Kapitel werden angezeigt ( ). Zeigen Sie mit dem Mauszeiger auf einen Titel.
Klicken Sie auf diese Option, um Informationen zur Anzeige der e-Anleitung anzuzeigen, wie eine Suche durchgeführt wird und andere Informationen. [Druck] Klicken Sie hier, um den angezeigten Inhalt zu drucken. Praktische Funktionen Bietet eine Vielzahl von praktischen Verwendungsbeispielen für das Gerät.
[Inhalt] Die Kapitelsymbole und Titel werden angezeigt. / Die Registerkarte [Inhalt] kann breiter und schmaler dargestellt werden. [Alles einblenden]/[Alles ausblenden] Klicken Sie auf [Alles einblenden], um die Unterabschnitte aller Themen anzuzeigen. Klicken Sie auf [Alles ausblenden], um die Unterabschnitte aller Themen zu schließen. Kapitelsymbole Klicken Sie auf ein Kapitelsymbol, um zum Anfang des entsprechenden Kapitels zu navigieren. Themenseite Zeigt die Themen des ausgewählten Kapitels an.
[Schlüsselwörter hier eingeben] Geben Sie ein Schlüsselwort oder mehrere Schlüsselwörter ein, und klicken Sie auf Suchdialogfeld anzuzeigen ( ). , um die Suchergebnisse im [Suchoptionen] Klicken Sie hier, um die Suchkriterien wie den Suchbereich und die Bedingungen für die unscharfe Suche festzulegen. Klicken Sie auf diese Schaltfläche, wenn sie grau dargestellt wird, um die Kriterien anzuzeigen. Klicken Sie auf diese Schaltfläche, wenn sie orangefarben dargestellt wird, um die Anzeige zu schließen.
Kapitelsymbole Klicken Sie hier, um zu dem Thema des ausgewählten Kapitels zu springen. Titel (Thema) Zeigt die Titel und Themen an. Klicken Sie auf einen Titel oder ein Thema, um zu der Seite zu springen. Klicken Sie hier, um zum Seitenanfang zurückzukehren. / Klicken Sie hier, um zum vorherigen oder nächsten Kapitel zu springen.
0CC5-0HC Anzeigen der e-Anleitung Kennzeichnungen Vorsichtshinweise zu Sicherheit, Beschränkungen und Vorsichtshinweise zur Handhabung des Geräts, praktische Tipps und andere Informationen werden mit den unten dargestellten Kennzeichnungen gekennzeichnet. Wenn Sie eine so gekennzeichnete Warnung nicht beachten, können ernsthafte Verletzungen oder Tod die Folge sein. Bitte beachten Sie diese Warnungen unbedingt, um den sicheren Betrieb zu gewährleisten.
Abbildungen in dieser Anleitung Sofern nicht anders angegeben, zeigen die Abbildungen in der e-Anleitung das Modell MF8580Cdw. Bei wichtigen Unterschieden werden mehrere Abbildungen mit den jeweiligen Modellbezeichnungen wie "MFXXXX / MFXXXX" verwendet. Abkürzungen in dieser Anleitung Die folgenden sind Abkürzungen der Produktnamen, die in dieser e-Anleitung verwendet werden.
0CC5-0HE Sonstiges In diesem Abschnitt werden grundlegende Windows-Funktionen beschrieben. Außerdem finden Sie hier weitere Informationen, beispielsweise zum Haftungsausschluss, und Copyright-Informationen.
0CC5-0HF Grundfunktionen in Windows Anzeigen von [Computer] oder [Arbeitsplatz] Windows XP Professional/Server 2003 [Start] wählen Sie [Arbeitsplatz]. Windows Vista/7/Server 2008 R2 [Start] wählen Sie [Computer]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm wählen Sie [Datei-Explorer] [Computer]. Anzeigen des Druckerordners Windows XP Professional/Server 2003 [Start] wählen Sie [Drucker und Faxgeräte].
gehen Sie wie unten erläutert vor. Der Name des CD-ROM-Laufwerks lautet in dieser Anleitung "D:". Je nach dem verwendeten Computer weist das CD-ROM-Laufwerk jedoch möglicherweise einen anderen Namen auf. Windows XP/Server 2003 1 [Start] 2 Geben Sie "D:\Minst.exe" (bei der User Software CD-ROM) bzw. "D:\Maninst.exe" (bei der Multi-lingual User Manual CD) ein, und klicken Sie dann auf [OK]. wählen Sie [Ausführen].
Überprüfen der Systemarchitektur Wenn Sie nicht wissen, ob auf Ihrem Computer die 32- oder 64-Bit-Version von Windows Vista/7/8/Server 2008/Server 2012 ausgeführt wird, gehen Sie wie folgt vor. 1 Rufen Sie [Systemsteuerung] auf. Windows Vista/7/Server 2008 wählen Sie [Systemsteuerung]. [Start] Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm 2 wählen Sie [Systemsteuerung]. Rufen Sie [System] auf.
4 Klicken Sie auf [Ändern] (bzw. [Eigenschaften]). Windows Vista/7/8/Server 2008/Server 2012 1 Rufen Sie [Systemsteuerung] auf. Windows Vista/7/Server 2008 [Start] wählen Sie [Systemsteuerung]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm 2 wählen Sie [Systemsteuerung]. Rufen Sie [System] auf. Windows Vista/7/8/Server 2008 R2/Server 2012 Klicken Sie auf [System und Sicherheit] (bzw. [System und Wartung]) [System].
㻢㻣㻡㻌㻛㻌㻢㻤㻝
0CC5-0HH Hinweise Dienste und Software von Drittanbietern Software Dritter R & TTE-Richtlinie Dieses Gerät (F164802/F164702) entspricht den wesentlichen Anforderungen der EU-Richtlinie 1999/5/EG und ist in der EU verwendbar. (Nur für Modelle mit Faxfunktion.) (Nur für Europa) Canon Inc./Canon Europa N.V. EMC-Anforderungen der EU-Richtlinie Dieses Gerät inklusive Ausstattung erfüllt die wesentlichen EMC-Anforderungen der EU-Richtlinie.
Informationen zu Verordnungen für Wireless LAN (nur MF8580Cdw / MF8280Cw) MF8580Cdw / MF8280Cw includes approved Wireless LAN Module (Model name: FM48944). Regulatory information Users in the European Union and other European countries R&TTE Declaration of Conformity (Wireless LAN Module) Dansk [Danish] Undertegnede CANON INC.
ìíïðòóô÷ù úûù÷ [Bulgarian] ý þòôÿ ú ú÷ïòóùóò ú óùï ù ù ùûùô÷ òþù þò ùóú÷ÿù ò ý Íslenska [Icelandic] Hér með lýsir CANON INC. því yfir að FM48944 sé í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk [Norwegian] CANON INC. erklærer herved at utstyret FM48944 er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. Gaeilge [Irish] Dearbhaíonn CANON INC.
[Italian] IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.* Nota per l’uso del prodotto.Francia: il prodotto non può essere utilizzato all’aperto.
Die Angaben in diesem Dokument können ohne vorherige Ankündigung geändert werden. CANON INC. GIBT BEZÜGLICH DIESES MATERIALS KEINE GEWÄHRLEISTUNGEN JEGLICHER ART, WEDER VERTRAGLICH NOCH GESETZLICH, AUSSER DEN HIER ANGEGEBENEN, EINSCHLIESSLICH, JEDOCH NICHT BESCHRÄNKT AUF, GEWÄHRLEISTUNGEN FÜR MARKTFÄHIGKEIT, HANDELSÜBLICHE QUALITÄT, EIGNUNG FÜR EINEN BESTIMMTEN ZWECK UND PATENTVERLETZUNG. CANON INC.
0CC5-0HU Kontakt CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 15F Jinbao Building No.
㻝㻌㻛㻌㻣㻠
Vor der Verwendung des Treibers 3 Informationen zu den Treibern und der Software 4 Unterstützte Betriebssysteme 5 Auswählen des zu installierenden Treibers 6 Installieren der MF-Treiber und Installieren von MF Toolbox 8 Installieren mit [Einfache Installation] (Windows) 9 Installieren mit [Benutzerdefinierte Installation] (Windows) 17 Installieren der Software (Macintosh) 28 Verbindung über USB-Kabel (Nur bei Verbindung mit USB) 32 Überprüfen der Installationsergebnisse (Windows) 33 Registrieren von Drucker
0CL4-000 Vor der Verwendung des Treibers Vor der Verwendung des Treibers Lesen Sie dieses Kapitel, bevor Sie Software wie z. B. die MF-Treiber installieren.
0CL4-001 Informationen zu den Treibern und der Software MF-Treiber Druckertreiber Wenn der Druckertreiber auf Ihrem Computer installiert ist, können Sie direkt aus einer Anwendung Druckaufträge an das Gerät senden. Faxtreiber *1 Wenn der Faxtreiber auf Ihrem Computer installiert ist, können Sie in einer Anwendung "Drucken" auswählen, den Canon Faxtreiber als Drucker auswählen und das Ausgabeziel sowie die Optionen für die Ausgabe festlegen.
0CL4-002 Unterstützte Betriebssysteme : Unterstützt : Nicht unterstützt Windows XP Windows Vista/7/8 Windows Server 2003 Druckertreiber (UFRII LT) *1 Windows Server 2008 *1 Druckertreiber (UFRII LT (XPS)) Windows Server 2008 R2/Server 2012 *1 *1 Druckertreiber (PCL5) *2 *1 *1 *1 Druckertreiber (PCL6) *2 *1 *1 *1 Faxtreiber *2 *1 *1 *1 Scannertreiber Network Scan Utility *1 *1 MF Toolbox Presto! PageManager *1 Wird nur über Netzwerkverbindung unterstützt.
0CL4-003 Auswählen des zu installierenden Treibers Wählen Sie den zu installierenden Treiber aus, nachdem Sie die Methode zur Herstellung einer Verbindung zwischen dem Gerät und einem Computer ausgewählt haben. 1 Drücken Sie . 2 Drücken Sie [ .
Wählen Sie die Sprache zur Beschreibung der Seite aus. Netzwerk Fax UFRII LT UFRII LT (XPS) PCL5 PCL6 USB UFRII LT UFRII LT (XPS) PCL5 PCL6 6 Starten Sie das Gerät neu. Sie müssen das Gerät erneut starten, damit die Einstellungen übernommen werden. Schalten Sie das Gerät aus, und warten Sie vor dem erneuten Einschalten mindestens 10 Sekunden.
0CL4-004 Installieren der MF-Treiber und Installieren von MF Toolbox Installieren der MF-Treiber und Installieren von MF Toolbox Installieren Sie die Software, damit Sie das Gerät verwenden können.
0CL4-005 Installieren mit [Einfache Installation] (Windows) 1 Legen Sie die User Software CD-ROM in das CD-Laufwerk Ihres Computers ein. 2 Klicken Sie auf [Einfache Installation]. Die angezeigten Optionen unterscheiden sich je nach Land und Region. Wenn der oben abgebildete CD-ROM-Installationsbildschirm nicht angezeigt wird: Windows XP und Server 2003 1. Wählen Sie im Menü [Start] die Option [Ausführen] aus. 2. Geben Sie "D:\MInst.exe" ein, und klicken Sie dann auf [OK].
Wählen Sie die gewünschte Sprache aus, und klicken Sie auf [OK]. 3 Wenn der folgende Bildschirm angezeigt wird, wählen Sie die Methode für die Herstellung einer Verbindung mit einem Computer aus. Für eine USB-Verbindung: Wählen Sie [USB-Verbindung] aus, und klicken Sie auf [Weiter]. Für eine Netzwerkverbindung: Wählen Sie [Netzwerkverbindung] aus, und klicken Sie auf [Weiter]. HINWEIS Windows Server 2003/Server 2008/Server 2012 Dieser Bildschirm wird nicht angezeigt.
5 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Ja]. 6 Klicken Sie auf [Weiter].
Der folgende Bildschirm wird angezeigt. Klicken Sie auf [Ja]. Für eine USB-Verbindung: Fahren Sie mit Schritt 9 fort. Für eine Netzwerkverbindung: Fahren Sie mit Schritt 7 fort. 7 Wählen Sie das zu installierende Gerät aus. (1) Wählen Sie das Gerät aus. (2) Klicken Sie auf [Weiter]. Wenn unter [Geräteliste] keine Geräte angezeigt werden: Gehen Sie folgendermaßen vor. 1. Überprüfen Sie Folgendes: Der Computer und das Gerät müssen über das Netzwerk miteinander verbunden sein.
handelt, legen Sie für dieses Gerät manuell eine IP-Adresse fest, die sich im gleichen Subnetz wie die des Computers befindet (aber keine Link-Local-Adresse). Danach kann dieses Gerät vom Installationsprogramm gefunden werden. e-Anleitung-> "Einstellen der IPv4-Adresse" 3. Klicken Sie auf [OK]. 8 Klicken Sie auf [Starten], um die Installation zu beginnen. 9 Klicken Sie auf [Beenden]. Für eine Netzwerkverbindung: Für eine USB-Verbindung: Als Nächstes erfolgt die Installation von MF Toolbox.
10 Klicken Sie auf [Starten]. 11 Klicken Sie auf [Beenden]. 12 Wenn der folgende Bildschirm erscheint, lesen Sie die angezeigten Informationen, und klicken Sie auf [Akzeptieren] oder [Nicht akzeptieren] und anschließend auf [Weiter].
Wenn Sie [Akzeptieren] auswählen: Das Product Extended Survey Program (Programm zum Untersuchen des Nutzungsstatus) wird installiert. Mit dem Product Extended Survey Program werden zehn Jahre lang jeden Monat Informationen zur Nutzung dieses Geräts an Canon gesendet. Andere Informationen einschließlich persönlicher Daten werden nicht gesendet. Sie können das Product Extended Survey Program auch deinstallieren.
Wenn Sie eine USB-Verbindung verwenden, warten Sie, bis Ihr Computer neu gestartet ist. "Verbindung über USB-Kabel (Nur bei Verbindung mit USB)" Wenn Sie eine Netzwerkverbindung verwenden, überprüfen Sie die Installationsergebnisse.
0CL4-006 Installieren mit [Benutzerdefinierte Installation] (Windows) 1 Legen Sie die User Software CD-ROM in das CD-Laufwerk Ihres Computers ein. 2 Klicken Sie auf [Benutzerdefinierte Installation]. Die angezeigten Optionen unterscheiden sich je nach Land und Region. Wenn der oben abgebildete CD-ROM-Installationsbildschirm nicht angezeigt wird: Windows XP und Server 2003 1. Wählen Sie im Menü [Start] die Option [Ausführen] aus. 2. Geben Sie "D:\MInst.exe" ein, und klicken Sie dann auf [OK].
Wenn vor dem CD-ROM-Installationsbildschirm der Sprachauswahlbildschirm angezeigt wird: Wählen Sie die gewünschte Sprache aus, und klicken Sie auf [OK]. 3 Wenn der folgende Bildschirm angezeigt wird, wählen Sie die Methode für die Herstellung einer Verbindung mit einem Computer aus. Für eine USB-Verbindung: Wählen Sie [USB-Verbindung] aus, und klicken Sie auf [Weiter]. Für eine Netzwerkverbindung: Wählen Sie [Netzwerkverbindung] aus, und klicken Sie auf [Weiter].
Die angezeigten Optionen unterscheiden sich je nach Land und Region. 5 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Ja]. 6 Klicken Sie auf [Weiter].
Der folgende Bildschirm wird angezeigt. Klicken Sie auf [Ja]. Für eine USB-Verbindung: Fahren Sie mit Schritt 13 fort. Für eine Netzwerkverbindung: Fahren Sie mit Schritt 7 fort. 7 Wählen Sie das zu installierende Gerät aus. (1) Wählen Sie das Gerät aus. (2) Klicken Sie auf [Weiter]. Wenn unter [Geräteliste] keine Geräte angezeigt werden: Gehen Sie folgendermaßen vor.
1. Überprüfen Sie Folgendes: Der Computer und das Gerät müssen über das Netzwerk miteinander verbunden sein. Das Gerät muss eingeschaltet sein. Die IP-Adresse muss richtig eingestellt sein. Der Computer und das Gerät müssen sich im gleichen Subnetz befinden. Vorhandene Sicherheitssoftware muss beendet worden sein. 2. Klicken Sie auf [Geräteliste aktualisieren]. Wenn nach der Durchführung der oben beschriebenen Schritte einzelne Geräte immer noch nicht angezeigt werden, gehen Sie folgendermaßen vor. 1.
Einstellungen angezeigt wird. 9 Festlegen der Drucker- oder Faxinformationen. (1) Geben Sie bei Bedarf die Einstellungen für die einzelnen Optionen an. (2) Klicken Sie auf [Weiter]. Druckerinformation*1 Faxinformation*2 *1 Wird angezeigt, wenn Sie in Schritt 8 [Drucker] ausgewählt haben. *2 Wird angezeigt, wenn Sie in Schritt 8 [Fax (für unterstützte Modelle)] ausgewählt haben. [Druckername] Geben Sie einen neuen Namen ein, wenn Sie den Drucker- oder Faxnamen ändern möchten.
(Installation über ein Netzwerk) bei Clientcomputern mit einem der folgenden 32-Bit-Betriebssysteme aufgrund einer Windows-Einschränkung nicht unterstützt.
12 Drucken einer Testseite. (1) Aktivieren Sie das Kontrollkästchen, um eine Testseite zu drucken. (2) Klicken Sie auf [Weiter]. Dieser Bildschirm wird nur bei der Installation des Druckertreibers und des Faxtreibers angezeigt. 13 Klicken Sie auf [Beenden]. Für eine Netzwerkverbindung: Für eine USB-Verbindung: Als Nächstes erfolgt die Installation von MF Toolbox. In den folgenden Fällen wird MF Toolbox nicht installiert. Fahren Sie mit Schritt 17 fort.
Die Bildschirme zum Festlegen eines Installationsverzeichnisses für MF Toolbox und zum Festlegen der Position, an der der Startmenüeintrag hinzugefügt wird, werden angezeigt. Nehmen Sie die Einstellungen in den jeweiligen Bildschirmen vor, und klicken Sie dann auf [Weiter]. Klicken Sie im daraufhin angezeigten Bildschirm auf [Start]. 15 Klicken Sie auf [Beenden]. Die Software, die Sie in Schritt 4 durch Aktivieren der Kontrollkästchen ausgewählt haben, wird installiert.
Wenn Sie [Akzeptieren] auswählen: Das Product Extended Survey Program (Programm zum Untersuchen des Nutzungsstatus) wird installiert. Mit dem Product Extended Survey Program werden zehn Jahre lang jeden Monat Informationen zur Nutzung dieses Geräts an Canon gesendet. Andere Informationen einschließlich persönlicher Daten werden nicht gesendet. Sie können das Product Extended Survey Program auch deinstallieren.
Wenn Sie eine USB-Verbindung verwenden, warten Sie, bis Ihr Computer neu gestartet ist. "Verbindung über USB-Kabel (Nur bei Verbindung mit USB)" Wenn Sie eine Netzwerkverbindung verwenden, überprüfen Sie die Installationsergebnisse.
0CL4-007 Installieren der Software (Macintosh) Wenn Sie eine USB-Verbindung herstellen wollen, schließen Sie nach dem Installieren der Software das USB-Kabel an. Wenn Sie die in diesem Abschnitt beschriebenen Schritte ausgeführt haben, fahren Sie mit den Schritten in "Registrieren von Drucker und Fax (Macintosh)" fort. Der Installationsbildschirm variiert je nach der Version von Mac OS X. Schließen Sie unbedingt alle laufenden Anwendungen.
4 Lesen Sie die Lizenzvereinbarung, und klicken Sie auf [Weiter]. 5 Klicken Sie auf [Zustimmen]. 6 Wenn der folgende Bildschirm angezeigt wird, klicken Sie auf [Weiter].
Sie können den Installationsort nicht ändern. 7 Klicken Sie auf [Installieren]. Möglicherweise wird die Schaltfläche [Installationsort ändern] angezeigt, Sie können den Installationsort aber nicht ändern. 8 Geben Sie [Name] und [Passwort] ein, und klicken Sie auf [OK]. Wenn Sie Mac OS X 10.7.x oder höher verwenden, klicken Sie auf [Software installieren].
9 Wenn der folgende Bildschirm angezeigt wird, klicken Sie auf [Schließen]. Bei einer USB-Verbindung fahren Sie mit "Verbindung über USB-Kabel (Nur bei Verbindung mit USB)" fort. Bei einer Netzwerkverbindung fahren Sie mit "Registrieren von Drucker und Fax (Macintosh)" fort.
0CL4-008 Verbindung über USB-Kabel (Nur bei Verbindung mit USB) 1 Entfernen Sie die Abdeckung über dem USB-Anschluss an der Rückseite des Geräts. Ziehen Sie wie unten abgebildet an der Schnur, um die Abdeckung zu entfernen. 2 Schließen Sie das USB-Kabel an. Verbinden Sie das flache Ende (a) mit dem USB-Anschluss des Computers. Verbinden Sie das quadratische Ende (b) mit dem USB-Anschluss des Geräts.
0CL4-009 Überprüfen der Installationsergebnisse (Windows) Überprüfen Sie, ob die MF-Treiber und MF Toolbox richtig installiert wurden. Die folgenden Symbole für die installierten Anwendungen müssen angezeigt werden. HINWEIS Informationen zu den angezeigten Symbolen: Je nach Betriebssystem werden die Symbole für die Treiber u. U. getrennt oder als repräsentative Symbole angezeigt.
0CL4-00A Registrieren von Drucker und Fax (Macintosh) Wenn Sie von einem Macintosh aus drucken oder ein Fax senden wollen, müssen Sie dieses Gerät beim Macintosh registrieren. Die Registrierungsmethode hängt von der Verbindungsmethode ab. Wählen Sie die Methode je nach der Umgebung aus. Wenn Sie die Scanfunktion über eine Netzwerkverbindung verwenden, müssen Sie den Scanner bei der MF Toolbox registrieren. Einzelheiten dazu finden Sie im Canon Scannertreiber-Handbuch.
4 Wählen Sie unter [Drucken mit] die Option [Druckersoftware auswählen]. 5 Wählen Sie aus der Treiberliste einen Treiber aus, der für dieses Gerät geeignet ist, und klicken Sie dann auf [OK]. Wenn Sie Mac OS X 10.5.x verwenden, müssen Sie nicht auf [OK] klicken. 6 Klicken Sie auf [Hinzufügen]. 7 Wenn der folgende Bildschirm erscheint, legen Sie die optionalen Einstellungen fest, und klicken Sie dann auf [Weiter] oder [OK].
8 Überprüfen Sie, ob das Gerät im Dialogfeld [Drucken & Faxen] oder [Drucken & Scannen] hinzugefügt wurde. 9 Schließen Sie das Dialogfeld. TCP/IP-Verbindung Registrieren Sie den Drucker bzw. das Fax wie in den folgenden Schritten beschrieben. Der Faxtreiber kann nicht in IPv6-Umgebung verwendet werden. 1 Öffnen Sie [Systemeinstellungen], und klicken Sie auf [Drucken & Faxen] oder [Drucken & Scannen]. 2 Klicken Sie auf das Symbol [+].
3 Klicken Sie auf [IP], und wählen Sie unter [Protokoll] ein Druckprotokoll aus. 4 Geben Sie in [Adresse] die IP-Adresse des Geräts ein, und wählen Sie dann unter [Drucken mit] die Option [Druckersoftware auswählen].
5 Wählen Sie aus der Treiberliste einen Treiber aus, der für dieses Gerät geeignet ist, und klicken Sie dann auf [OK]. Wenn Sie Mac OS X 10.5.x verwenden, müssen Sie nicht auf [OK] klicken. 6 Klicken Sie auf [Hinzufügen]. 7 Wenn der folgende Bildschirm erscheint, legen Sie die optionalen Einstellungen fest, und klicken Sie dann auf [Weiter] oder [OK]. 8 Überprüfen Sie, ob das Gerät im Dialogfeld [Drucken & Faxen] oder [Drucken & Scannen] hinzugefügt wurde.
9 Schließen Sie das Dialogfeld. USB-Verbindung Registrieren Sie den Drucker bzw. das Fax wie in den folgenden Schritten beschrieben. 1 Öffnen Sie [Systemeinstellungen], und klicken Sie auf [Drucken & Faxen] oder [Drucken & Scannen]. 2 Klicken Sie auf das Symbol [+].
3 Klicken Sie auf [Standard], und wählen Sie dann einen Druckernamen, bei dem [USB] in der Spalte [Art] oder [Verbindung] angezeigt wird. 4 Wählen Sie unter [Drucken mit] die Option [Druckersoftware auswählen]. 5 Wählen Sie aus der Treiberliste einen Treiber aus, der für dieses Gerät geeignet ist, und klicken Sie dann auf [OK]. Wenn Sie Mac OS X 10.5.x verwenden, müssen Sie nicht auf [OK] klicken. 6 Klicken Sie auf [Hinzufügen].
8 Überprüfen Sie, ob das Gerät im Dialogfeld [Drucken & Faxen] oder [Drucken & Scannen] hinzugefügt wurde. 9 Schließen Sie das Dialogfeld.
0CL4-00C Installieren der neuesten von der Canon Homepage heruntergeladenen Treiber In diesem Abschnitt werden die Schritte beschrieben, mit denen Sie von der Canon Homepage heruntergeladene Treiber/Software installieren. Informationen zum Herunterladen der Treiber/Software finden Sie auf der Download-Website der Canon Homepage. 1 Dekomprimieren Sie die heruntergeladene Datei. 2 Öffnen Sie den Ordner [DRIVERS], und doppelklicken Sie dann auf [Setup] oder [Setup.exe].
0CL4-00E Installieren der MF-Treiber im WSD-Netzwerk (Windows) Installieren der MF-Treiber im WSD-Netzwerk (Windows) Auf einem Computer mit Windows Vista/7/8/Server 2008/Server 2012 können Sie über das WSD-Protokoll (Web Services on Devices) drucken. Führen Sie die Schritte in "Installieren der MF-Treiber" und in "Einstellen von WSD" aus, um WSD zu verwenden: WICHTIG So aktivieren oder deaktivieren Sie WSD: Verwenden Sie das Bedienfeld des Geräts.
0CL4-00F Installieren der MF-Treiber 1 Öffnen Sie den Druckerordner. Für Windows Vista: Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus, und klicken Sie dann auf [Drucker]. Windows 7/Server 2008 Wählen Sie im Menü [Start] die Option [Geräte und Drucker] aus. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm, wählen Sie [Systemsteuerung], und klicken Sie dann auf [Geräte und Drucker anzeigen]. 2 Klicken Sie auf [Drucker hinzufügen].
4 [LPT1: (Druckeranschluss)] muss für [Vorhandenen Anschluss verwenden] angezeigt werden. Klicken Sie auf [Weiter]. 5 Klicken Sie auf [Datenträger]. 6 Legen Sie die User Software CD-ROM in das CD-Laufwerk Ihres Computers ein.
Wenn der folgende Bildschirm angezeigt wird, klicken Sie auf [Beenden]. Die angezeigten Optionen unterscheiden sich je nach Land und Region. Wenn [AutoPlay] angezeigt wird: Klicken Sie auf [ ], um das Dialogfeld zu schließen. 7 Klicken Sie auf [Durchsuchen]. 8 Öffnen Sie den Ordner, in dem sich die Druckertreiber befinden. 32-Bit-Versionen: Öffnen Sie auf der CD-ROM den Ordner [DRIVERS] -> [deutsch] -> [32bit] -> [Driver], und klicken Sie auf [Durchsuchen...].
Wenn Sie nicht sicher sind, welches Betriebssystem auf Ihrem Computer installiert ist: "So überprüfen Sie die Systemarchitektur (Windows)" 9 Klicken Sie auf [OK]. 10 Wählen Sie den Drucker aus, den Sie verwenden, und klicken Sie auf [Weiter].
11 Geben Sie den Druckernamen an. (1) Geben Sie einen anderen Namen ein, um den Standarddruckernamen zu ändern. Wenn [Als Standarddrucker einstellen] angezeigt wird, geben Sie an, ob Sie das Gerät als Standarddrucker verwenden möchten (Windows Vista/Server 2008). (2) Klicken Sie auf [Weiter]. Die Installation wird gestartet. Warten Sie, bis der folgende Bildschirm geschlossen wird.
Wenn [Benutzerkontensteuerung] angezeigt wird: Klicken Sie auf [Ja] oder [Fortsetzen]. 12 Wählen Sie [Drucker nicht freigeben] aus, und klicken Sie auf [Weiter]. Um den Drucker freizugeben, konfigurieren Sie die entsprechenden Einstellungen, nachdem Sie die unter "Einstellen von WSD" beschriebenen Schritte ausgeführt haben. 13 Klicken Sie auf [Fertig stellen].
Das Symbol wird dem Druckerordner hinzugefügt.
0CL4-00H Einstellen von WSD 1 Öffnen Sie den Netzwerkordner. Windows Vista/Server 2008: Wählen Sie aus dem Menü [Start] die Option [Netzwerk] aus. Windows 7/Server 2008 R2: Wählen Sie aus dem Menü [Start] die Option [Computer] aus, und klicken Sie auf [Netzwerk]. Windows 8/Server 2012 Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm, wählen Sie [Datei-Explorer], und klicken Sie dann auf [Netzwerk].
Wenn [Benutzerkontensteuerung] angezeigt wird: Klicken Sie auf [Ja] oder [Fortsetzen]. Führen Sie die unten beschriebenen Schritte aus, um das in Schritt 13 unter "Installieren der MF-Treiber" hinzugefügte Symbol zu löschen, wenn Sie dieses nicht benötigen. (1) Klicken Sie mit der rechten Maustaste auf das Symbol, und wählen Sie aus dem Kontextmenü [Gerät entfernen] oder [Löschen] aus. (2) Klicken Sie auf [Ja]. (3) Wenn [Benutzerkontensteuerung] angezeigt wird, klicken Sie auf [Ja] oder auf [Weiter].
0CL4-00J Deinstallieren der Software Deinstallieren der Software Wenn Sie die Treiber oder Anwendungen nicht benötigen, deinstallieren Sie sie wie folgt.
0CL4-00K Deinstallation der Drucker-/Fax-/Scannertreiber (Windows) 1 Öffnen Sie [Programme und Funktionen]. Windows XP: Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus, und doppelklicken Sie dann auf [Software]. Windows Vista/7/Server 2003/Server 2008: 1. Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus. 2. Klicken Sie auf [Programm deinstallieren], oder doppelklicken Sie auf [Programme und Funktionen].
㻡㻡㻌㻛㻌㻣㻠
0CL4-00L Deinstallieren von MF Toolbox (Windows) 1 Öffnen Sie [Programme und Funktionen]. Windows XP: Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus, und doppelklicken Sie dann auf [Software]. Windows Vista/7/Server 2003/Server 2008: 1. Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus. 2. Klicken Sie auf [Programm deinstallieren], oder doppelklicken Sie auf [Programme und Funktionen].
㻡㻣㻌㻛㻌㻣㻠
0CL4-00R Deinstallieren der Treiber für das WSD-Gerät (Windows) 1 Legen Sie die User Software CD-ROM ein. Wenn der folgende Bildschirm angezeigt wird, klicken Sie auf [Beenden]. Die angezeigten Optionen unterscheiden sich je nach Land und Region. Wenn [AutoPlay] angezeigt wird: Klicken Sie auf [ ], um das Dialogfeld zu schließen. 2 Öffnen Sie auf der CD-ROM den Ordner, der das Deinstallationsprogramm enthält.
Wenn [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder [Fortsetzen]. 4 Klicken Sie auf [Löschen]. 5 Klicken Sie auf [Ja]. 6 Klicken Sie auf [Beenden].
7 Rufen Sie den Explorer auf, und klicken Sie auf [Netzwerk]. 8 Klicken Sie mit der rechten Maustaste auf das Symbol für das Gerät, und wählen Sie aus dem Kontextmenü [Deinstallieren] aus. Wenn [Benutzerkontensteuerung] angezeigt wird Klicken Sie auf [Ja] oder [Fortsetzen]. Das Symbol für das Gerät wird aus dem Druckerordner gelöscht, und die Deinstallation ist abgeschlossen.
0CL4-00S Deinstallieren des Product Extended Survey Program (Windows) 1 Öffnen Sie [Programme und Funktionen]. Windows XP: Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus, und doppelklicken Sie dann auf [Software]. Windows Vista/7: 1. Wählen Sie im Menü [Start] die Option [Systemsteuerung] aus. 2. Klicken Sie auf [Programm deinstallieren], oder doppelklicken Sie auf [Programme und Funktionen].
0CL4-00U Deinstallieren der Software (Macintosh) 1 Wenn das Gerät über ein USB-Kabel an einen Computer angeschlossen ist, lösen Sie das USB-Kabel. Wenn Sie den Scannertreiber oder die MF Toolbox löschen wollen, fahren Sie mit Schritt 4 fort. 2 Öffnen Sie [Systemeinstellungen], und klicken Sie auf [Drucken & Faxen] oder [Drucken & Scannen]. 3 Wählen Sie das Gerät aus, und klicken Sie auf das Symbol [-]. 4 Klicken Sie auf der Menüleiste auf [Gehe zu] -> [Gehe zu Ordner].
Druckertreiber /Library/Printers/PPDs/Contents/Resources/ CNPZBxxxZB.ppd.gz (xxx kann je nach Modell variieren.) /Library/Printers/Canon/ CUPSFAX /Library/Printers/PPDs/Contents/Resources/ CNMCxxxFB.ppd.gz (xxx kann je nach Modell variieren.) /Applications/ Canon MF Utilities /Library/Application Support/Canon/ ScanGear MF /Library/Application Support/Canon/ WMCLibrary.framework /Library/Application Support/Canon/ WMCReb.plist /Library/Image Capture/Devices/* Canon MFScannerxxx.
0CL4-00W Fehlerbehebung Siehe die folgenden Abschnitte: "Die Software kann nicht installiert werden." "Von der mit dem Gerät mitgelieferten User Software CD-ROM installierte Anwendungen sind in der MF Toolbox nicht ordnungsgemäß registriert." "Das Deinstallieren der Treiber dauert zu lange (Windows XP)." "Der Ordner [Canon] befindet sich auch nach dem Deinstallieren der Software im Startmenü." "Die Software kann nach dem Aktualisieren des Betriebssystems nicht verwendet werden.
Die Software kann nach dem Aktualisieren des Betriebssystems nicht verwendet werden. Deinstallieren Sie die Software für dieses Gerät, bevor Sie das Betriebssystem auf dem Computer aktualisieren. Wenn die Aktualisierung abgeschlossen ist, installieren Sie die Software neu.
0CL4-00X So verwenden Sie die Online-Hilfe In der Online-Hilfe finden Sie Informationen zu allen Funktionen der Treibersoftware und zu den verfügbaren Optionen. Wenn Sie direkt während der Verwendung der Treibersoftware Beschreibungen zu den Funktionen und Einstellungen erhalten möchten, verwenden Sie die Online-Hilfe. Windows: (1) Wählen Sie in der Anwendung auf der Menüleiste [Datei] -> [Drucken] aus. (2) Wählen Sie im Dialogfeld [Drucken] unter [Drucker auswählen] oder unter [Name] den Drucker aus.
(2) Wählen Sie in [Drucker] den Drucker aus. (3) Ändern Sie den Inhalt im unteren Bereich des Dialogfelds in [Endverarbeitung], [Qualität], [Sonderfunktionen] usw. (4) Klicken Sie auf . So zeigen Sie den Hilfebildschirm an: Sie können durch Eingabe eines Schlüsselworts nach Inhalten suchen.
0CL4-00Y Überprüfen von Einstellungen für die IP-Adresse HINWEIS Wenn das Gerät nicht ordnungsgemäß an das Netzwerk angeschlossen ist: Die IP-Adresse wird als "0.0.0.0" angezeigt. Wenn die Einstellung für die Startzeit angegeben wird: Die IP-Adresse, Subnetmaske und Gateway-Adresse werden nach Ablauf der angegebenen Zeit angezeigt. e-Anleitung -> "Einstellen einer Wartezeit für die Netzwerkverbindung" Wenn das Gerät an einen Switching Hub angeschlossen ist: Das Gerät kann u. U.
5 Überprüfen Sie die Informationen. 6 Drücken Sie oder (Statusmonitor), um den Bildschirm zu schließen. Überprüfen von Einstellungen für die IPv6-Adresse 1 Drücken Sie oder (Statusmonitor). 2 Drücken Sie [ ] oder [ ], um hervorzuheben, und drücken Sie dann ] oder [ ], um hervorzuheben, und drücken Sie dann 3 Drücken Sie [ 㻢㻥㻌㻛㻌㻣㻠 . .
4 Drücken Sie [ . dann ] oder [ ], um die Option hervorzuheben, die Sie überprüfen möchten, und drücken Sie 5 Überprüfen Sie die Informationen. 6 Drücken Sie oder (Statusmonitor), um den Bildschirm zu schließen.
0CL4-010 So überprüfen Sie die Systemarchitektur (Windows) 1 Rufen Sie [Systemsteuerung] auf. Windows Vista/7/Server 2008: Wählen Sie aus dem Menü [Start] die Option [Systemsteuerung] aus. Windows 8/Server 2012: Klicken Sie mit der rechten Maustaste unten links auf dem Bildschirm, und wählen Sie [Systemsteuerung]. 2 Zeigen Sie [System] an. Windows Vista/7/8/Server 2008 R2/Server 2012: Klicken Sie auf [System und Wartung] oder [System und Sicherheit], und klicken Sie dann auf [System].
0CL4-011 Haftungsausschluss Die Angaben in diesem Dokument können ohne vorherige Ankündigung geändert werden. CANON, INC. ÜBERNIMMT KEINERLEI GARANTIEN BEZÜGLICH DES MATERIALS, WEDER AUSDRÜCKLICHER NOCH STILLSCHWEIGENDER ART, AUSSER WIE IN DIESEM ABSCHNITT ANGEGEBEN, EINSCHLIESSLICH, JEDOCH NICHT BESCHRÄNKT AUF, GARANTIEN DER MARKTFÄHIGKEIT UND HANDELSÜBLICHEN QUALITÄT, DER EIGNUNG FÜR EINEN BESTIMMTEN ZWECK ODER EINE BESTIMMTE VERWENDUNG ODER DER NICHTVERLETZUNG. CANON, INC.
0CL4-012 Copyright Copyright Canon Inc. 2013 Alle Rechte vorbehalten. Ohne die vorhergehende schriftliche Zustimmung von Canon, Inc., darf kein Teil dieses Handbuchs in irgendeiner Form, sei es auf elektronische, mechanische, magnetische, optische, chemische, manuelle oder sonstige Art oder durch Datenabrufsysteme, reproduziert, übertragen, transkribiert oder gespeichert werden oder in eine Sprache oder Computersprache übersetzt werden.
0CL4-013 Warenzeichen Canon und das Canon-Logo sind in den Vereinigten Staaten eingetragene Markenzeichen von Canon Inc. und können auch in anderen Ländern Markenzeichen oder eingetragene Markenzeichen sein. Windows, Windows Vista und Windows Server sind Marken oder eingetragene Marken der Microsoft Corporation in den USA und/oder anderen Ländern. Bonjour, Finder, Macintosh, Mac OS und OS X sind Marken oder eingetragene Marken der Apple Inc. in den USA und/oder anderen Ländern.