Specifications

Operating Mk2500PC
29
[Media Size]:
Selects the size of printing media.
The sizes you can select depend on the type of printing
media used.
Tube :2.5, 3.0, 4.0, 5.0, 6.0 or 6.5mm
Shrink Tube : 3.0, 3.2, 4.8, 6.0 or 6.4mm
Label : 6.0, 9.0, 12.0mm
4mm I.D. Strip : Size not selectable.
Clear Tube :2.5, 3.0, 4.0, 5.0, 6.0 or 6.5mm
Wrap Around : Size not selectable.
Terminal I.D. :8.0, 8.5, 9.0, 9.5 or 10.0mm
[Sets to Print]:
Selects the number of items to be printed.
Select from 1-10.
6 Click the [OK].
Format settings and data list contents are sent to the printer.
 If there is no data when you click the [OK], “No character data” appears.
 Click the [Cancel] to cancel data transfer and close the dialog box.
 During actual printing, the printer may automatically change the settings made at
data creation according to the printing media type in order to maintain the
required print quality. Refer to “Printing with [Specify] Specified for Set Length”
(P.35).
 To use the printer after sending data, you need to cancel the standby state (ready
for data reception) of the printer. Make sure that the printer is not receiving data,
and then press the [Cancel] key. When the character input display appears, you
can operate the printer.