User`s guide

98
5
 Input“2V”.
Confirmthatthecharactersthatareinput
aredisplayedontheirside.
6
 Press[
▼
]or[
►
].
If you press [Enter] instead of [
▼
] or [►], a new page is created.
Thecursormovestothesecondline.
7
 Input“24V”.
8
 Press[Print].
The Print Media selection display appears.•
Acheckmark isdisplayednexttothe
currentlyselectedprintmedia.
9
 Press[
▲
]or[
▼
]toselect“Label”,andthenpress[Enter].
The label tape size (width) selection display appears.•
Acheckmark isdisplayednexttothe
currentlyselectedlabeltapesize.
10
 Press[
▲
]or[
▼
]toselect“2mm”,andthenpress[Enter].
The sets to print and range setting display appears.•
11
 Press[Enter].
Printing begins.•
Precaution to Follow When Changing the Character Orientation for All Pages
Together
When the print orientation is changed to “Horizontal/Horizontal Character” or “Vertical/
Vertical Character”, characters which cannot be in the page are deleted. When changing the
orientation of the characters on multiple pages by selecting “All”, characters which cannot
be in the pages are deleted together from all pages. To avoid deleting the input characters,
save the data to a le before changing the orientation.