User`s guide

02
4.
 Press[
◄
]or[
►
]toselecttheadjust-ment
value,andthenpress[Enter].
The correction value can be specified with the
[+] or [-] key and numeric keys.
You can input a correction value for negative correction.
However, if there is no correction space (part other than
characters), no more correction can be made.
The minimum unit of correction which is handled internally
is 0.085 mm.
If you input the wrong number by mistake, press [Back
Space] to delete the number and then input the correct
number.
•
Segment length and character alignment screen display
The segment length and character alignment settings can be conrmed on display.
Whensegmentlengthsettingis“Automatic”
Thesettingishighlighted
segmentlength
Always
centered“C”
When“Specify”isselectedontheSegLength
selectiondisplayand“Normal”isselectedonthe
PlatePrintingAreaselectiondisplay
Margin
"C"whencentered,"L"whenleft-aligned
segmentlength
When“Specify”isselectedontheSegLength
selectiondisplayand“Expansion”isselectedon
thePlatePrintingAreaselectiondisplay
"E"when
"Expansion"
isselected
"C"whencentered,"L"whenleft-aligned
segmentlength
Use [◄] and [►] to set values to the right of the decimal point when setting the label length.