User`s guide

09
Advanced Operations
Part 4
4
 Press[
►
]fourtimes;“Right.0mm”isdisplayed.
Pressing [
►
] increases the value in steps of 0.25mm.
Press [
◄
] to move the printing start position to the left.
The printing start position can be adjusted up to 2.5 mm to the left or right.
•
Confirmthattheprintingstartpositionis
now“Right.0mm”.
5
 Press[Enter].
The display returns to the character input display. The printing
start position has now been shifted 1mm to the right. Next,
move the vertical position down 0.5mm.
•
6
 Press[Adjust].
The Print Media selection display appears.•
7
 Press[
▲
]or[
▼
]toselect“Label”,andthenpress[Enter].
The Adjustments screen appears.
The vertical position can also be set separately for each print media.
•
8
 Press[
▲
]or[
▼
]toselect“Verticaladjust”,andthenpress
[Enter].
The print media size selection screen appears.•
9
 Press[
▲
]or[
▼
]toselect“2mm”,andthenpress[Enter].
This selects the print media size for which the adjustment is to
be made.
When [Enter] is pressed, the vertical adjustment selection
display appears.
When the print media is 4mm I.D. strip or wrap around tape, size selection is skipped.
•
•
Indicatesthattheverticalpositionisat
thestandardsetting(withnoadjustment).
10
 Press[
▼
]twotimes;“Down0.5mm”isdisplayed.
Pressing [
▼
] increases the value in steps of 0.25mm.
Press [▲] to move the vertical position up.
Height can be adjusted up to 0.5 mm upwards or downwards.
•
Confirmthattheverticalpositionisnow
“Down0.5mm”.
11
 Press[Enter].
The display returns to the character input display. The vertical
position has now been shifted down by 0.5mm.
•