User`s guide

25
Maintenance
Part 5
5
 Removethelabeltapeifitisloaded.
Ifthelabeltapewindsitselfaroundsomepartsandthereforeit
cannotberemoved,proceedtostep6withoutremovingit.
6
 Closethecover.
7
 Pullouttheprintingmediawhilepressingthe
[
►
]keycontinuouslytofeedthetubereverse.
Ifyoucannotpullouttheprintingmediaby
feedingthetubereverse,pressthe[
◄
]keyto
feedthetubeforward.
While you keep pressing the [
►
] or [
◄
] key,
the tube is continuously fed reverse or forward.
•
If the ribbon cassette could not be removed in step 4 or the label tape could not be removed in step 5, open
the cover and check whether the ribbon cassette or label tape can be removed.
If ribbon cassette or label tape can be removed, remove it and close the cover.
If ribbon cassette or label tape cannot be removed, close the cover and keep pressing the [
►
] or [
◄
] key
to check whether the ribbon cassette or label tape can be removed. Open/close the cover and keep pressing
the [
►
] or [
◄
] key repeatedly until the ribbon cassette or label tape can be removed.
8
 Feedthetubereverse(bypressingthe[
►
]key)orforward(by
pressingthe[
◄
]key)repeatedlytopullouttheprintingmedia
completely.
9
 Cutoutthebentordamagedportionofthejammedprinting
mediaortheprintedportionoftheprintingmediaifitexists.
Thus, the printing media removal procedure is completed.•
10
 Makepreparationsforprinting(Part2“BasicOperations”).
Openthecover,loadtheremovedribboncassette,tube,orlabeltape,andthenclosethe
cover.
Pressthe[Canc]keytoreturntothecharacterinputdisplay.