User`s guide
27
Maintenance
Part 5
7
Select“Feed”bypressingthe[
▲
]or[
▼
]key,andthenpress
the[Enter]key.
A display indicating how to feed the printing media forward or
reverse appears.
•
8
Pullouttheprintingmediawhilepressingthe
[
►
]keycontinuouslytofeedthetubereverse.
Ifyoucannotpullouttheprintingmediaby
feedingthetubereverse,pressthe[
◄
]keyto
feedthetubeforward.
While you keep pressing the [
►
] or [
◄
] key,
the printing media is continuously fed reverse or
forward.
•
If the ribbon cassette could not be removed in step 3 or the label tape could not be removed in step 4, open
the cover and check whether the ribbon cassette or label tape can be removed.
If the ribbon cassette or label tape can be removed, remove it and close the cover.
If ribbon cassette or label tape cannot be removed, close the cover and keep pressing the [
►
] or [
◄
] key
to check again whether the ribbon cassette or label tape can be removed. Open/close the cover and keep
pressing the [
►
] or [
◄
] key repeatedly until the ribbon cassette or label tape can be removed.
9
Feedthetubereverse(bypressingthe[
►
]key)orforward(by
pressingthe[
◄
]key)repeatedlytopullouttheprintingmedia
completely.
10
Cutoutthebentordamagedportionofthejammedprinting
mediaortheprintedportionoftheprintingmediaifitexists.
Thus, the printing media removal procedure is completed.•
11
Makepreparationsforprinting(Part2“BasicOperations”).
Openthecover,loadthepreviouslyremovedribboncassette,tube,orlabeltape,andthen
closethecover.
Pressthe[Canc]keytoreturntothecharacterinputdisplay.