User`s guide

34
4
 Installthenewcutter.
To ensure correct orientation, align the “
-
” mark
on the cutter with the “◄” mark as shown, and
insert the cutter all the way in.
•
5
 Pulloutthecutterreceiver.
6
 Insertthenewcutterreceiver.
Push the cutter receiver in as far as it will go.•
Besurethatthecutterreceiverisfacing
inthecorrectdirection.
7
 Closethecover.
8
 Turnthepowerswitchon.
Press the “
|
” side. •