User`s guide
40
Cleaningtheprinthead
Use a cotton swab to clean dirt from the print head. Be very careful not to scratch the head. Also, always be
sure to turn the power switch off before beginning to clean the print head. If the print head is extremely dirty,
place a few drops of water on the cotton swab, and then wipe the dirt away. Never use alcohol, benzene, or
other solvents. Such chemicals could damage the unit.
Printhead
Cleaning/Replacingthetubecleanerforattachment
The attachment has a cleaner that removes dirt from the surface of media.
Remove the cleaner as shown in the illustration, and then clean the sponge to remove accumulated dirt.
When the sponge becomes damaged, replace the cleaner.
Contact your nearest dealer to purchase replacement tube cleaners.
Sponge
Cleaner