User`s guide

44
6.2
Message List
Message Description Action
Cannot modify. An attempt was made to select an
unavailable setting.
Check the User's Guide and make
the correct setting.
Input value out of range. An attempt was made to input a
value that is outside of the settable
range.
Check the User's Guide and make
the correct setting.
In Vert/Hor char, Character Space
setting not possible.
An attempt was made to select
the character spacing when the
printing orientation is set as “Vert/
Hor char”.
The character spacing cannot
be selected when the printing
orientation is set as “Vert/Hor
char”.
No data to paste. The paste operation was attempted
while there was no page data to be
pasted.
Prepare data to be pasted by
cutting or copying a page.
Not enough memory.
Character input is no longer
possible.
An attempt was made to input
characters when there was
insufcient free space in memory.
Delete some input data to free up
some space.
Length exceeded. Input data
exceeds set length.
An attempt was made to input a
value that is outside of the settable
range.
Check the User's Manual and make
the correct setting.
Numbering already set for this
page.
An attempt was made to set the
numbering function a second time
on a page in which numbering was
already set.
The numbering setting can only be
made once per page.
Char limit exceed. Exceeded
maximum Number of characters
An attempt was made to input
characters in excess of the number
of characters that can be input.
Input only the allowed number of
characters.
xxxxxx already exists.
Change the folder name
An attempt was made to specify a
folder name that already exists.
Specify a different folder name.
Not enough memory.
Cannot save any more les.
An attempt was made to save a le
while there was insufcient free
space remaining.
Delete any unnecessary les to
create free space.
No les. An attempt was made to load or
delete a le even though no les
have been saved.
Conrm the le save destination
folder. Save the le once more.
No les in selected folder. An attempt was made to load or
delete a le in a folder even though
no les have been saved in that
folder.
Already 50 les in selected folder. An attempt was made to save more
than 50 les in a single folder.
Either delete any unnecessary les
and then save the desired les in
that folder, or else save the les in
a different folder.
Symbol can not be input
with1.3mm font.
Symbols cannot be entered when
the character size is set to 1.3 mm.
Change the character size to a
value other than 1.3 mm.
Number of the characters over.
Cannot change.
An attempt was made to select
“Auto” on the Segment Leng
selection display for the page
in which a maximum number
of characters were input with
“Expansion” selected on the Plate
Printing Area selection display.
Delete characters to reduce
the number of characters to a
changeable one, and then change
the setting.