User`s guide

46
Memory backup battery low.
Contact dealer.
The memory backup batteries do
not have adequate capacity.
Contact your dealer.
Memory backup battery exhausted.
Resetting memory.
Because the memory backup
batteries do not have adequate
capacity, the data settings have
been initialized.
Contact your dealer.
Media JAM
Enter/Cancel
Tube or label tape is jammed. Refer to “If a Tube or Label Tape
Becomes Jammed” and remove the
jammed object.
Printing...
Ribbon will end soon
Remaining ribbon is low when
printing. (approximately 10m
remaining)
Have a new ribbon cassette ready.
Replace with new ribbon cassette
if printing a long document.
No ribbon information.
No ribbon amount displayed.
Press enter
The printer could not properly
communicate with the ribbon
cassette.
Or, the end of the ribbon has
been reached and the relevant
information has been written on
the ribbon.
Follow the instruction on the
screen.
If PlatePrintingArea is Expansion,
the media become only the Plate.
“Expansion” has been selected on
the Plate Printing Area selection
display.
Only plates can be used as
printing media. If you wish to
print characters on another media,
select “Auto” on the Seg Length
selection display according to
“Printing with short pitch width”
(page 111) or “Changing the length
and the character alignment” (page
99).