User`s guide
49
Appendices
Part 6
Torn ribbon The tube is stained with sticky
matter similar to the glue.
Use a clean tube.
Cannot select printing media other
than the plate.
There is a page for which
“Expansion” was selected on
the Plate Printing Area selection
display.
Select “Auto” on the Seg Length
selection display according to
"Printing with short pitch width”
(page 111) and “Changing the
length and the character alignment”
(page 99).
* The defective jack of the AC adapter cannot be repaired. Please purchase a new AC adapter from your nearest
dealer.
* Between the printing start point and the point about 60 mm away from it, the tube is cut to a length which is
slightly shorter than the specied segment length due to the machine structure.