User`s guide

52
6.6
Main Specifications
Printing method ..................................Thermal transfer using one-line head
Resolution ..........................................300dpi
Printing speed .....................................Tube: High speed mode (40 mm/sec), Middle speed mode (25 mm/sec),
Low speed mode (18.5 mm/sec)
Label: High speed mode (40 mm/sec), Middle/Low speed mode (25 mm/sec)
Throughput .........................................High speed mode (42 tube segments/min), Middle speed mode (35 tube
segments/min), Low speed mode (30 tube segments/min)
(Printing conditions: Printing media =Tube, Segment length = 20 mm,
Characters to print = Five “3mm 100%” characters, Half/full cutting setting
= Half cutting, Cutting strength: Normal)
Ink ribbon ...........................................Special cassette (black, white)
Character print size ............................1.3mm full-width, 2, 3 and 6mm (each full and half-width)
Input system .......................................Notebook computer keyboard
Display system ...................................LCD (160 x 64 dots) with backlight
Number of display characters ............Input data 10 characters x 2 lines (for normal size)
Internal memory .................................Printing character data storage of approximately 2,500 characters
File storage of approximately 15,000 characters
Note: Internal battery preserves memory for about 5 years
Cutting method...................................Automatic half cut, automatic full cut
Power supply ......................................Custom AC adapter (K30120) Nisca Corporation
Input voltage: AC100V to 240V 50/60Hz
PC interface ........................................USB 2.0 Full-Speed, Used with the PC Connection Kit.
Operating environment ......................15 to 32.5°C*; 10 to 85%RH (with no condensation)
* With the optional Tube Warmer installed, the printer can also be used at
lower temperatures (5°C to 18°C).
Storage environmert ...........................5 to 35°C, 10 to 90%RH
External dimensions ...........................250 (W) x 300 (D) x 85 (H) mm
Weight ................................................2.0kg (not including accessories)
Printing Media
Tube ...................................................Tube:
φ
2.5 to 6.5 mm inside diameter, 0.5 mm thickness
* Before using a tube, be sure to check whether characters can be printed on
it.
Heat shrink tube .................................Cassette (white, yellow)
2:1 shrinkage:
φ
3.2,
φ
4.8 or
φ
6.4 mm diameter, 5 m length
3:1 shrinkage:
φ
3.0 or
φ
6.0 mm diameter, 5 m length
Label tape ...........................................Cassettes (white, yellow, silver) in 6, 9 or 12 mm width, 30 m length (ex.
silver: 27 m length)
Wrap around tape ...............................Cassettes (white for printing part, other part is transparent) 8 m rolls, 33
mm length, width settable from 8 to 150 mm by cutting length setting
4mm I.D. strip ....................................Cassettes (white, yellow) in 4.0 mm width, 5m length
Plate ....................................................Commercially available plate: 8 to 10mm width, 0.5mm thickness
* Before using a plate, be sure to check whether characters can be printed
on it.
Contact your nearest dealer for details concerning other types of print media that can be used.
Specifications are subject to change without notice.
Printing may not be possible on some types of commercially available tube or plate. Before using it, be sure
to check whether characters can be printed on it.
•
•
•