User`s guide

9
Before You Begin
Part 1
 Cover
Open this cover when you need to load a cassette
or tube.
 Coverrelease
Pull this lever to the left to open the cover.
 Powerswitch
Use this switch to turn the power on and off. Flip
the switch to the “|” position to turn the power on,
and ip the switch to the “ ” position to turn the
power off.
 LCDscreen
Displays text that has been input or the
information about settings.
 Ribboncassetteholder
Place the ribbon cassette here.
 Mountinglocationforattachmentorprinting
mediacassette
Mount the tube attachment or label tape cassette
here. The optional Tube Warmer also mounts
here.
 Cutter
The cutter cuts printing media automatically. The
cutter can be replaced.
 Cutterreceiver
This is the receiver for the cutter blade when
cutting printing media. When the cutter is
replaced, the cutter receiver is replaced at the
same time.
 Printhead
This device prints by applying heat to a ribbon.
As it becomes very hot, not touch this device
while printing is in progress or immediately after
printing.
 Transportroller
This roller feeds printing media to the print head.
 Transportroller2
This roller feeds printing media past the print
head.
 Transportroller3
This roller feeds printed printing media to the
cutter.
 Transportroller3releaselever
Pull this lever to the right to release transport
roller 3. Use this lever when clearing jammed
printing media.
 Mediaintake
Insert tube or plate here (when attachment
installed).
 Outlet
Printed printing media emerge here.
 Keyboard
Input text to be printed and data for settings
through this keyboard.
 ACadapterconnector
Connect the AC adapter cable here.
 Interfacecover
Open this cover to connect the USB cables of
the PC connection kit or/and the Tube Feeder
(optional).
 Wraparoundtapeguide
This guide is installed when printing on wrap
around tape. Remove it when printing to other
media.
 Handle
Hold this handle when carrying the printer.
 Connectorforribboncassette
This is to read out information of the ribbon
cassette. Do not touch and deform the connector.