User`s guide

20
 LCDscreen
 CapsLock
Indicates whether the Caps Lock mode is active.
: Active, so all alphabetic characters are
entered in uppercase.
(no indication): Normal(inactive)
 Insert/Overwritemodeindicator
Indicates which of the two input modes is selected:
insert mode or overwrite mode.
: Insert mode
(no indication): Overwrite mode
 Printingspeedindicator
Indicates which printing speed has been selected:
high, middle, or low.
H
: High
M
: Middle
L
: Low
 Halfcuttingmodeindicator
Indicates the half cutting mode that was selected
for a single printing operation in which multiple
tube segments or label tape are printed and then
cut apart. Note that the half cutting mode is
selected by pressing [Set Cut]
: Half cut.
: Not half cut, but a solid line is printed
showing where to cut with scissors, etc.
: Not half cut, but a dotted line is printed
showing where to cut with scissors, etc.
(Noindication)
: Not half cut, and no cutting line
is printed.
 Powerindicator
Indicates that the AC adapter is properly
connected.
: AC adapter
 TubeFeeder
Indicates that the optional Tube Feeder has been
installed.
 SegLength/Alignment/marginindicator
Indicates either “Seg Length”, the length of one
tube segment(or one label); “Alignment”, whether
text is centered or left-justied; or “margin”.
 Nextpageindicator
Indicates that another page exists following the
currently displayed page.