User`s guide


A Vital Tool for Electrical Facilities
Introducing the Mk2500

When you open a power distribution panel, you are confronted with an array of tightly packed terminals, circuit
breakers, and switches, and these myriad devices are connected by a maze of cables. If each device and cable
is not clearly labeled with a symbol or a number, maintenance can become a nightmare. In such electrical
facilities, it is common practice to use printed tube to identify cables and printed labels to identify switches. The
printer is used to print such labels and tube.
Easy yet high-quality
printing
Printing tube
The Mk2500 can print
tube that identify cables:
“AB-01” or “+20V”, for
example. Because the tube
that is used is available
commercially, the Mk2500
provides an economical
solution. The Mk2500 can
also be used to print on heat
shrink tube.
Label switches clearly
Printing labels
The Mk2500 can also be
used to print label tape (sold
separately). Because labels
that correspond to specic
cable tube labels can be
printed and applied to the
corresponding devices,
using such labels results in
improved efciency.
Label with clear adhesive
lamination
Wrap around tape
with printable and
laminating layers
When applied after printing,
the printing is covered by
plastic laminating lm,
protecting the characters
from scratching.
Adheres to cables after they
have been connected.
Tube
Label
Labeled with switch
name or number
Clear
laminate seal