User`s guide

49
Basic Operations
Part 2
3
 Installtheribboncassetteintotheprinter.
Push the cassette in until it clicks into the place.
If the ribbon cassette is loose, the ribbon may not be detected, so be sure to press it in until
it clicks.
•
CAUTION
Do not touch the connector (metal part)
Do not hold the connection terminal (metal part) of the cassette. Doing so could cause
an improper recognition of the cassette.
4
 Installtheplateattachmentintotheprinter.
Align the tabs on the plate attachment with the
holes in the printer, and then push the plate
attachment in until it clicks into the place.
•
5
 Removethewraparoundtapeguide.
page 18.•
6
 Closethecover.
Close the cover completely so that it clicks shut.•
Use only a plate ink ribbon cassette!
A special ribbon cassette is required for printing on plates.
The supplied ink ribbon cassette will not print properly on
plate media.
This cassette is not included with this product, so contact your
nearest dealer.
*The tension of the ink ribbon dedicated to the plate was factory-adjusted.