Owner's manual

SETTING THE FILM SPEED . .
When using the light meter, the speed of the film
used should be set on the film speed indicator
window on the shutter speed dial. In order to set
the film speed, turn the shutter speed dial while
pressing the film speed indicator button. In case
the speed of the film used is not indicated on the
window, it may be set between two figures.
•Using ASA 100 I.DIN 21) film, the sensitivity of
the light meter is :
High-sensitivity range Light Vaiue
(orange dot)
Low-sensitivity-range
Cbiack dot)
Light Vaiue
6-13 (with F 1.4
1/30 sec. to F 22
1/15)
12-19 (with F 2
1/1000 sec. to
F 22 1/1000)
•When the background is brighter than the sub
ject, measure the correct exposure from as close
as possible.
(If you cannot get close to the subject, open the
lens aperture by one or one-and-a-half clicks.
The Film Seeds are as follows.
(64, 80) (125, 160) (250, 320)
ASA 6 16 25 32 50 - 100 • 200 • 400
DIN 9 13 15 16 18 • 21 - 24 • 27
(19, 20) (22, 23) (25, 26)
Film Speed
Indicator Button
Film Speed
Indicator Window