Operation Manual

Advanced Guide
Troubleshooting
Contents
> Copying > Fit-to-Page Copying
Fit-to-Page Copying
The Fit-to-Page copy function enables you to copy the original automatically enlarged or reduced to fit the
selected page size.
1.
Prepare for copying.
See step 1 in
Copying Documents.
2.
Press the [
+
] button repeatedly to specify the number of copies.
3.
Press the
Paper
button repeatedly to select the page size and media type.
Note
When the plain paper is selected for the media type, the original is copied with borders.
When the photo paper is selected for the media type, the original is copied without borders
and fills the entire page.
In borderless copying, slight cropping may occur at the edges since the copied image is
enlarged to fill the whole page.
4.
Press the
Fit to Page
button.
The
Fit to Page
lamp lights up and the Fit-to-Page copy function is enabled. The original is copied in the size
automatically enlarged or reduced to fit the selected page size.
Note
Press the Fit to Page button again to cancel the Fit-to-Page copy function and copy the
original in the same size.
5.
Press the
Color
button for color copying, or the
Black
button for black & white
copying.
The machine starts Fit-to-Page copying.
Remove the original on the Platen Glass after copying is completed.
Important
Do not open the Document Cover or move the loaded original until copying is completed.
Note
You can set the print quality to "Fast" (speed priority) only when A4 or Letter-sized plain paper
Page 19 of 678 pagesFit-to-Page Copying