Operation Manual

Advanced Guide
Troubleshooting
Contents
>
Overview of the Machine
> Main Components
Main Components
Front View
Rear View
Inside View
Operation Panel
Front View
(1)
Document Cover
Open to load an original on the Platen Glass.
(2)
Paper Support
Raise and tip back to load paper in the Rear Tray.
(3)
Rear Tray
Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same
size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
See
Loading Paper
.
(4)
Paper Guides
Slide to align with both sides of the paper stack.
(5)
Operation Panel
Use to change the settings of the machine or to operate it.
See
Operation Panel
.
Note
The LED and lamps on the Operation Panel other than the
Power
lamp will go out if the
machine is not operated for about 5 minutes. To restore them, press any button except the
ON
button or perform the print operation.
(6)
Paper Output Tray
Opens automatically when printing or copying starts and printed paper is ejected.
(7) Output Tray Extension
Page 4 of 678 pagesMain Components