Operation Manual

Advanced Guide
Troubleshooting
Contents
> Loading Paper / Originals > Loading Originals
Loading Originals
Loading Originals
Originals You Can Load
Loading Originals
Load originals to copy or scan on the Platen Glass.
Important
After loading the original, be sure to close the Document Cover before starting to copy or scan.
When scanning from a computer using a software application, you need to load the original in a
different way.
For details, refer to the on-screen manual:
Advanced Guide
.
1.
Load an original on the Platen Glass.
(1)
Open the Document Cover.
Important
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
(2)
Load an original WITH THE SIDE TO COPY OR SCAN FACING DOWN on the
Platen Glass.
Align the corner of the original with the alignment mark
.
Important
Do not place any objects weighing more than 4.4 lb / 2.0 kg on the Platen Glass.
Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing so
may cause the scanner to malfunction or the Platen Glass to break.
The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the
Platen Glass).
Page 53 of 678 pagesLoading Originals