Operation Manual

Advanced Guide
> Maintenance >
Aligning the Print Head > Aligning the Print Head
Aligning the Print Head
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace
the FINE Cartridge whose ink is low.
Routine Maintenance
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the Rear Tray.
3.
Open the Paper Output Tray gently, and open the Output Tray Extension.
4.
Print the print head alignment sheet.
1.
Press the
Maintenance button repeatedly until u (lowercase "u") appears.
2.
Press the
Black
or
Color
button.
The print head alignment sheet will be printed.
Important
Do not touch any printed part on the print head alignment sheet.
Do not dirty the print head alignment sheet. If the sheet is stained or wrinkled, the pattern
may not be scanned correctly.
5.
Scan the sheet to adjust the print head position.
Page 547 of 678 pagesAligning the Print Head